Juniper-IP-POLICY-MIB Table View

This table contains entries for elements of IP access lists.  Entries
belonging to the same access list are ordered, and comparisons to those
entries are performed in that order until a match is detected.  If no
match is found, the default action is to 'deny'.

juniIpAccessListEntry row .1.3.6.1.4.1.4874.2.2.13.1.1.1.1

Each entry describes the characteristics of an IP access list element.

Indexes

juniIpAccessListId juniIpAccessListElemId

Column	Syntax	OID
juniIpAccessListId The number of the access list to which this entry belongs.	Integer32 Constraints: range: 1-10000	.1.3.6.1.4.1.4874.2.2.13.1.1.1.1.1
juniIpAccessListElemId The relative position of this entry within its access list. Access list entries are searched in this sequence (low to high values) until a match is found. NOTE: The value zero is reserved for use with S…	Integer32 Constraints: range: 0-10000	.1.3.6.1.4.1.4874.2.2.13.1.1.1.1.2
juniIpAccessListRowStatus Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndGo destroy Two configuration levels ar…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.4874.2.2.13.1.1.1.1.3
juniIpAccessListAction Specifies the disposition of an item that matches the comparison criteria described by this entry.	JuniIpPolicyPolicyr/w Type Values: 0 permit 1 deny	.1.3.6.1.4.1.4874.2.2.13.1.1.1.1.4
juniIpAccessListSrc A source IP address. A subject IP address is first masked with the value of juniIpAccessListSrcMask, then the result is compared to this value. Setting both this object and its corresponding mask to 0.0.0.0 acts as a …	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.4874.2.2.13.1.1.1.1.5
juniIpAccessListSrcMask The IP address mask to be applied to a subject source IP address before comparing it to juniIpAccessListSrc. Ones in the mask identify which bits in the subject IP address are significant for the comparison. …	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.4874.2.2.13.1.1.1.1.6
juniIpAccessListDst A destination IP address. A subject IP address is first masked with the value of juniIpAccessListDstMask, then the result is compared to this value. Setting both this object and its corresponding mask to 0.0.0.0 acts …	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.4874.2.2.13.1.1.1.1.7
juniIpAccessListDstMask The IP address mask to be applied to a subject destination IP address before comparing it to juniIpAccessListDst. Ones in the mask identify which bits in the IP address are significant for the comparison. …	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.4874.2.2.13.1.1.1.1.8
juniIpAccessListProtocol An IP Protocol value. Nonzero values match a specific IP Protocol value (e.g. 6 for TCP) carried in an IP packet; a value of zero acts as a wildcard, matching any IP Protocol.	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.4874.2.2.13.1.1.1.1.9

This table contains entries for elements of IP access lists.  Entries
belonging to the same access list are ordered, and comparisons to those
entries are performed in that order until a match is detected.  If no
match is found, the default action is to 'deny'.

juniIpNamedAccessListEntry row .1.3.6.1.4.1.4874.2.2.13.1.2.1.1

Each entry describes the characteristics of an IP access list element.

Indexes

juniIpNamedAccessListName juniIpNamedAccessListElemId

Column	Syntax	OID
juniIpNamedAccessListName The name of the access list to which this entry belongs.	JuniIpPolicyName Type Constraints: range: 0..32	.1.3.6.1.4.1.4874.2.2.13.1.2.1.1.1
juniIpNamedAccessListElemId The relative position of this entry within its access list. Access list entries are searched in this sequence (low to high values) until a match is found. NOTE: The value zero is reserved for use with S…	Integer32 Constraints: range: 0-10000	.1.3.6.1.4.1.4874.2.2.13.1.2.1.1.2
juniIpNamedAccessListRowStatus Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndGo destroy Two configuration levels ar…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.4874.2.2.13.1.2.1.1.3
juniIpNamedAccessListAction Specifies the disposition of an item that matches the comparison criteria described by this entry.	JuniIpPolicyPolicyr/w Type Values: 0 permit 1 deny	.1.3.6.1.4.1.4874.2.2.13.1.2.1.1.4
juniIpNamedAccessListSrc A source IP address. A subject IP address is first masked with the value of juniIpNamedAccessListSrcMask, then the result is compared to this value. Setting both this object and its corresponding mask to 0.0.0.0 acts …	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.4874.2.2.13.1.2.1.1.5
juniIpNamedAccessListSrcMask The IP address mask to be applied to a subject source IP address before comparing it to juniIpNamedAccessListSrc. Ones in the mask identify which bits in the subject IP address are significant for the comparison. …	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.4874.2.2.13.1.2.1.1.6
juniIpNamedAccessListDst A destination IP address. A subject IP address is first masked with the value of juniIpNamedAccessListDstMask, then the result is compared to this value. Setting both this object and its corresponding mask to 0.0.0.0 …	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.4874.2.2.13.1.2.1.1.7
juniIpNamedAccessListDstMask The IP address mask to be applied to a subject destination IP address before comparing it to juniIpNamedAccessListDst. Ones in the mask identify which bits in the IP address are significant for the comparison. …	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.4874.2.2.13.1.2.1.1.8
juniIpNamedAccessListProtocol An IP Protocol value. Nonzero values match a specific IP Protocol value (e.g. 6 for TCP) carried in an IP packet; a value of zero acts as a wildcard, matching any IP Protocol.	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.4874.2.2.13.1.2.1.1.9

This table contains entries for elements of IP AS-Path access entries.

juniIpAspAccessEntry row .1.3.6.1.4.1.4874.2.2.13.1.3.1.1

Each entry describes the characteristics of an IP AS-Path access
element.

Indexes

juniIpAspAccessName juniIpAspAccessElemId

Column	Syntax	OID
juniIpAspAccessName The name of the AS-Path Access List to which this entry belongs.	JuniIpPolicyName Type Constraints: range: 0..32	.1.3.6.1.4.1.4874.2.2.13.1.3.1.1.1
juniIpAspAccessElemId The element ID portion of the IP AS-Path for this entry.	Integer32 Constraints: range: 0-10000	.1.3.6.1.4.1.4874.2.2.13.1.3.1.1.2
juniIpAspAccessCreatedInternally Indicated whether this entry was created internally by the system, or dynamically via a management interface. A true value for this object indicates that this entry was created internally; false indicates externally.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4874.2.2.13.1.3.1.1.3
juniIpAspAccessPolicy Indicates the action to take for this AS-Path access list.	JuniIpPolicyPolicyr/w Type Values: 0 permit 1 deny	.1.3.6.1.4.1.4874.2.2.13.1.3.1.1.4
juniIpAspAccessExpression The AS-Path access list expression for this entry.	OctetStringr/w Constraints: range: 1-256	.1.3.6.1.4.1.4874.2.2.13.1.3.1.1.5
juniIpAspAccessRowStatus Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndGo destroy To create an entry in this …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.4874.2.2.13.1.3.1.1.6

This table contains entries for elements of IP prefix lists.  Entries
belonging to the same prefix list are ordered, and comparisons to those
entries are performed in that order until a match is detected.  If no
match is found, the default action is to 'deny'.

juniIpPrefixListEntry row .1.3.6.1.4.1.4874.2.2.13.1.4.1.1

Each entry describes the characteristics of an IP prefix list element.

Indexes

juniIpPrefixListName juniIpPrefixListElemId juniIpPrefixListIpAddress juniIpPrefixListLength

Column	Syntax	OID
juniIpPrefixListName The name of the prefix list to which this entry belongs.	JuniIpPolicyName Type Constraints: range: 0..32	.1.3.6.1.4.1.4874.2.2.13.1.4.1.1.1
juniIpPrefixListElemId The relative position of this entry within its prefix list. Access list entries are searched in this sequence (low to high values) until a match is found.	Integer32 Constraints: range: 0-10000	.1.3.6.1.4.1.4874.2.2.13.1.4.1.1.2
juniIpPrefixListIpAddress The IP Address portion of the IP List value for this entry.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.4874.2.2.13.1.4.1.1.3
juniIpPrefixListLength The length portion of the IP List value for this entry.	Integer32 Constraints: range: 0-32	.1.3.6.1.4.1.4874.2.2.13.1.4.1.1.4
juniIpPrefixListPolicy The IP Prefix list action to perform for this entry.	JuniIpPolicyPolicyr/w Type Values: 0 permit 1 deny	.1.3.6.1.4.1.4874.2.2.13.1.4.1.1.5
juniIpPrefixListGeValue The minimum prefix length to apply to address.	Integer32r/w Constraints: range: 0-32	.1.3.6.1.4.1.4874.2.2.13.1.4.1.1.6
juniIpPrefixListLeValue The maximum prefix length to apply to address.	Integer32r/w Constraints: range: 0-32	.1.3.6.1.4.1.4874.2.2.13.1.4.1.1.7
juniIpPrefixListDescription The administratively assigned description for this entry.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.4874.2.2.13.1.4.1.1.8
juniIpPrefixListHitCount The number of hits for this entry.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4874.2.2.13.1.4.1.1.9
juniIpPrefixListRowStatus Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndGo destroy To create an…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.4874.2.2.13.1.4.1.1.10

This table contains entries for elements of IP prefix trees.  Entries
belonging to the same prefix tree are ordered, and comparisons to those
entries are performed in that order until a match is detected.  If no
match is found, the default action is to 'deny'.

juniIpPrefixTreeEntry row .1.3.6.1.4.1.4874.2.2.13.1.5.1.1

Each entry describes the characteristics of an IP prefix tree element.

Indexes

juniIpPrefixTreeName juniIpPrefixTreeIpAddress juniIpPrefixTreeLength

Column	Syntax	OID
juniIpPrefixTreeName The name of the prefix tree to which this entry belongs.	JuniIpPolicyName Type Constraints: range: 0..32	.1.3.6.1.4.1.4874.2.2.13.1.5.1.1.1
juniIpPrefixTreeIpAddress The IP Address portion of the IP Prefix value for this entry.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.4874.2.2.13.1.5.1.1.2
juniIpPrefixTreeLength The length portion of the IP Prefix value for this entry.	Integer32 Constraints: range: 0-32	.1.3.6.1.4.1.4874.2.2.13.1.5.1.1.3
juniIpPrefixTreePolicy The IP Prefix tree policy perform for this entry.	JuniIpPolicyPolicyr/w Type Values: 0 permit 1 deny	.1.3.6.1.4.1.4874.2.2.13.1.5.1.1.4
juniIpPrefixTreeDescription The administratively assigned description for this entry.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.4874.2.2.13.1.5.1.1.5
juniIpPrefixTreeHitCount The number of hits for this entry.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4874.2.2.13.1.5.1.1.6
juniIpPrefixTreeRowStatus Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndGo destroy To create an entry in this …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.4874.2.2.13.1.5.1.1.7

This table contains entries for elements of IP Community Lists.
Entries belonging to the same Community List are ordered.  The table
supports standard and extended community lists.

juniIpCommunityListEntry row .1.3.6.1.4.1.4874.2.2.13.1.6.1.1

Each entry describes the characteristics of an IP Community List
element.

Indexes

juniIpCommunityListName juniIpCommunityListElemId

Column	Syntax	OID
juniIpCommunityListName The name of the Community List to which this entry belongs.	JuniIpPolicyName Type Constraints: range: 0..32	.1.3.6.1.4.1.4874.2.2.13.1.6.1.1.1
juniIpCommunityListElemId The IP Address portion of the IP Prefix value for this entry.	Integer32 Constraints: range: 0-10000	.1.3.6.1.4.1.4874.2.2.13.1.6.1.1.2
juniIpCommunityListCreatedInternally Indicated whether this entry was created internally by the system, or dynamically via a management interface. A true value for this object indicates that this entry was created internally; false indicates externally.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4874.2.2.13.1.6.1.1.3
juniIpCommunityListExtended Indicates whether this entry is a standard or extended Community List. True indicates extended, false indicates standard	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4874.2.2.13.1.6.1.1.4
juniIpCommunityListPolicy Indicates the policy action to perform for this list.	JuniIpPolicyPolicyr/w Type Values: 0 permit 1 deny	.1.3.6.1.4.1.4874.2.2.13.1.6.1.1.5
juniIpCommunityListExpression The community list expression for this entry.	OctetStringr/w Constraints: range: 1-256	.1.3.6.1.4.1.4874.2.2.13.1.6.1.1.6
juniIpCommunityListRowStatus Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndGo destroy To create an entry in this …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.4874.2.2.13.1.6.1.1.7

This table contains entries for Extended IP Community Lists.  Entries
belonging to the same Extended Community List are ordered.

juniIpExtCommunityListEntry row .1.3.6.1.4.1.4874.2.2.13.1.6.2.1

Each entry describes the characteristics of an Extended IP Community
List element.

Indexes

juniIpExtCommunityListName juniIpExtCommunityListElemId

Column	Syntax	OID
juniIpExtCommunityListName The name of the Extended Community List to which this entry belongs.	JuniIpPolicyName Type Constraints: range: 0..32	.1.3.6.1.4.1.4874.2.2.13.1.6.2.1.1
juniIpExtCommunityListElemId The element ID value for this entry.	Integer32 Constraints: range: 0-10000	.1.3.6.1.4.1.4874.2.2.13.1.6.2.1.2
juniIpExtCommunityListCreatedInternally Indicated whether this entry was created internally by the system, or dynamically via a management interface. A true value for this object indicates that this entry was created internally; false indicates externally.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4874.2.2.13.1.6.2.1.3
juniIpExtCommunityListPolicy Indicates the policy action to perform for this list.	JuniIpPolicyPolicyr/w Type Values: 0 permit 1 deny	.1.3.6.1.4.1.4874.2.2.13.1.6.2.1.4
juniIpExtCommunityListExpression The extended community list expression for this entry.	OctetStringr/w Constraints: range: 8-256	.1.3.6.1.4.1.4874.2.2.13.1.6.2.1.5
juniIpExtCommunityListRowStatus Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndGo destroy To create an entry in this …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.4874.2.2.13.1.6.2.1.6

This table contains entries for elements of IP Dynamic Route
Redistribution elements.

juniIpDynRedistributeEntry row .1.3.6.1.4.1.4874.2.2.13.1.7.1.1

Each entry describes the characteristics of a dynamic IP Route
Redistribute element.

Indexes

juniIpDynRedistributeToProtocol

Column	Syntax	OID
juniIpDynRedistributeToProtocol Identifies the protocol associated with this Dynamic Route Redistribution element that routes are redistributed to.	JuniIpDynRedistributeProtocol Type Values: 1 ipRedistrProtocolIsis 2 ipRedistrProtocolRip 3 ipRedistrProtocolOspf 4 ipRedistrProtocolStatic 5 ipRedistrProtocolConnected 6 ipRedistrProtocolBgp 7 ipRedistrProtocolMBgp 8 ipRedistrProtocolStaticLow 9 ipRedistrProtocolOspfIntern 10 ipRedistrProtocolOspfExtern 11 ipRedistrProtocolDvmrp 12 ipRedistrProtocolDvmrpAggregate 13 ipRedistrProtocolHidden 14 ipRedistrProtocolOwnerAccess 15 ipRedistrProtocolOwnerAccessInternal 16 ipRedistrProtocolOwnerDialout 17 ipRedistrProtocolDefaultRoute	.1.3.6.1.4.1.4874.2.2.13.1.7.1.1.1
juniIpDynRedistributeState Indicates the enable/disable state of this redistribution element.	JuniIpPolicyAdminStatusr/w Type Values: 0 ipPolicyAdminStateDisable 1 ipPolicyAdminStateEnable	.1.3.6.1.4.1.4874.2.2.13.1.7.1.1.2
juniIpDynRedistributeRowStatus Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndGo destroy To create an entry in this …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.4874.2.2.13.1.7.1.1.3

This table contains entries for elements of IP Route Redistribution
elements.

juniIpRedistributeEntry row .1.3.6.1.4.1.4874.2.2.13.1.7.2.1

Each entry describes the characteristics of an IP Route Redistribution
element.

Indexes

juniIpRedistributeToProtocol juniIpRedistributeFromProtocol

Column	Syntax	OID
juniIpRedistributeToProtocol Identifies the protocol for this element that routes are redistributed to.	JuniIpRedistributeProtocol Type Values: 1 ipRedistrProtocolStatic 2 ipRedistrProtocolBgp 3 ipRedistrProtocolMBgp 4 ipRedistrProtocolOspf 5 ipRedistrProtocolIsis 6 ipRedistrProtocolRip 7 ipRedistrProtocolConnected 8 ipRedistrProtocolDefaultRoute 9 ipRedistrProtocolAccess 10 ipRedistrProtocolAccessInternal 11 ipRedistrProtocolDvmrp 12 ipRedistrProtocolDialout 13 ipRedistrProtocolOspfM 14 ipRedistrProtocolStaticMcast 15 ipRedistrProtocolLdpUcast	.1.3.6.1.4.1.4874.2.2.13.1.7.2.1.1
juniIpRedistributeFromProtocol Identifies the protocol for this element that routes are redistributed from.	JuniIpRedistributeProtocol Type Values: 1 ipRedistrProtocolStatic 2 ipRedistrProtocolBgp 3 ipRedistrProtocolMBgp 4 ipRedistrProtocolOspf 5 ipRedistrProtocolIsis 6 ipRedistrProtocolRip 7 ipRedistrProtocolConnected 8 ipRedistrProtocolDefaultRoute 9 ipRedistrProtocolAccess 10 ipRedistrProtocolAccessInternal 11 ipRedistrProtocolDvmrp 12 ipRedistrProtocolDialout 13 ipRedistrProtocolOspfM 14 ipRedistrProtocolStaticMcast 15 ipRedistrProtocolLdpUcast	.1.3.6.1.4.1.4874.2.2.13.1.7.2.1.2
juniIpRedistributeState Indicates the enable/disable state of this redistribution element.	JuniIpPolicyAdminStatusr/w Type Values: 0 ipPolicyAdminStateDisable 1 ipPolicyAdminStateEnable	.1.3.6.1.4.1.4874.2.2.13.1.7.2.1.3
juniIpRedistributeRouteMapName Identifies the IP route-map associated with this IP Route Redistribution element.	JuniIpPolicyNamer/w Type Constraints: range: 0..32	.1.3.6.1.4.1.4874.2.2.13.1.7.2.1.4
juniIpRedistributeRowStatus Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndGo destroy To create an entry in this …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.4874.2.2.13.1.7.2.1.5

This table contains entries for elements of IP Route Maps.

juniIpRouteMapEntry row .1.3.6.1.4.1.4874.2.2.13.1.8.1.1

Each entry describes the characteristics of an IP Route Map element.

Indexes

juniIpRouteMapName juniIpRouteMapSequenceNum juniIpRouteMapElemId juniIpRouteMapSubElemId

Column	Syntax	OID
juniIpRouteMapName The name of the route map to which this entry belongs.	JuniIpPolicyName Type Constraints: range: 0..32	.1.3.6.1.4.1.4874.2.2.13.1.8.1.1.1
juniIpRouteMapSequenceNum The element ID value for this entry.	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.4874.2.2.13.1.8.1.1.2
juniIpRouteMapElemId The element ID to which this entry belongs.	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.4874.2.2.13.1.8.1.1.3
juniIpRouteMapSubElemId The sub-element ID to which this entry belongs.	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.4874.2.2.13.1.8.1.1.4
juniIpRouteMapCreatedInternally Indicated whether this entry was created internally by the system, or dynamically via a management interface. A true value for this object indicates that this entry was created internally; false indicates externally.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4874.2.2.13.1.8.1.1.5
juniIpRouteMapPolicy Indicates the policy action performed by this element.	JuniIpPolicyPolicy Type Values: 0 permit 1 deny	.1.3.6.1.4.1.4874.2.2.13.1.8.1.1.6
juniIpRouteMapDisplay Textual information taken from the NVT ASCII character set (i.e. RFC1903 DisplayString), but with increased length. The information in this object is the series of set, match, and/or match & set clauses for this route …	OctetString Constraints: range: 0-2048	.1.3.6.1.4.1.4874.2.2.13.1.8.1.1.7

This table contains entries for route maps instances.

juniIpRouteMapV2Entry row .1.3.6.1.4.1.4874.2.2.13.1.8.2.1

Each entry is a specific instance of the Route Map.

Indexes

juniIpRouteMapV2Name juniIpRouteMapV2SequenceNum

Column	Syntax	OID
juniIpRouteMapV2Name The name of the route map to which this instance entry belongs.	JuniIpPolicyName Type Constraints: range: 0..32	.1.3.6.1.4.1.4874.2.2.13.1.8.2.1.1
juniIpRouteMapV2SequenceNum Multiple instances of the same route map can be created by assigning a different sequence number to it. Each instance is identified by the route map name and the sequence number. The value of the sequence number assoc…	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.4874.2.2.13.1.8.2.1.2
juniIpRouteMapV2Policy Indicates the policy action performed by this route map instance.	JuniIpPolicyPolicyr/w Type Values: 0 permit 1 deny	.1.3.6.1.4.1.4874.2.2.13.1.8.2.1.3
juniIpRouteMapV2RowStatus Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndGo destroy To create an entry in this …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.4874.2.2.13.1.8.2.1.4

This table contains entries for instances of the route map clause
elements.

juniIpRouteMapClauseEntry row .1.3.6.1.4.1.4874.2.2.13.1.8.3.1

Each entry describes the characteristics of one route map clause
element instance.

Indexes

juniIpRouteMapV2Name juniIpRouteMapV2SequenceNum juniIpRouteMapClauseElemId juniIpRouteMapClauseSubElemId

Column	Syntax	OID
juniIpRouteMapClauseElemId The clause element selection option. Select the appropriate element option to configure each element instance of match, match-set and set clauses. For the complete configuration map table refer to the juniIpRouteMapCl…	Enumeration Enumerated Values: 0 matchNotKnown 1 matchAsPath 2 matchCommunity 3 matchExtendedCommunity 4 matchDistance 5 matchAccessList 6 matchNextHop 7 matchPrefixList 8 matchNextHopPreList 9 matchPrefixTree 10 matchNextHopPreTree 11 matchLevel 12 matchMetric 13 matchMetricType 14 matchTag 15 matchRouteType 16 matchSource 17 matchPolicyList 100 setAsPath 101 setAsPathCreateList 102 setAutoTag 103 setCommList 104 setCommunityNone 105 setCommunityAdd 106 setCommunity 107 setCommunityCreateListAdd 108 setCommunityCreateList 109 setExtendedCommunityCreateAdd 110 setExtendedCommunityCreate 111 setNextHop 112 setNextHopPeerAddr 113 setLocalPref 114 setWeight 115 setLevel 116 setMetric 117 setMetricType 118 setTag 119 setOrigin 220 setRouteType 221 setDampingCreate 222 setDistance 300 matchSetSummary	.1.3.6.1.4.1.4874.2.2.13.1.8.3.1.1
juniIpRouteMapClauseSubElemId The clause element sub ID used to distinguish specific instance of the element. This value is determined by choosing the next available by walking the table.	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.4874.2.2.13.1.8.3.1.2
juniIpRouteMapClauseElemIdAddon This represents clause element instance add-on option selected along with the main option (juniIpRouteMapClauseElemId) whenever it applies. For more information on how to map this object value to each value, refer to th…	Enumerationr/w Enumerated Values: 0 notApplicable 1 exact 2 delete 3 relativeNeg 4 relativePos 5 extCommRt 6 extCommSoo 7 interfaceValue 8 ipAddress	.1.3.6.1.4.1.4874.2.2.13.1.8.3.1.3
juniIpRouteMapClauseElementValue This represents set, match-set and match clauses' different element instance values in character string form. Whatever may be the data type of the attribute element instance value, it is always interpreted as a set of …	OctetStringr/w Constraints: range: 0-100	.1.3.6.1.4.1.4874.2.2.13.1.8.3.1.4
juniIpRouteMapClauseRowStatus Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndGo destroy To create/delete an entry i…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.4874.2.2.13.1.8.3.1.5