Juniper-INET-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
1
Rows
1
Columns
14

juniInetStaticRouteTable

table
.1.3.6.1.4.1.4874.2.2.82.1.1.1 · 1 row entry · 14 columns
Open in standard view 
Table of static routes configured on this entity.
          
The object definitions and indexing for this table are chosen to closely
align with the protocol independent IP-FORWARD-MIB's inetCidrRouteTable.
          
Currently only IPv6 static route table is extended here.
juniInetStaticRouteEntry entry .1.3.6.1.4.1.4874.2.2.82.1.1.1.1
Attributes of a static route.
Indexes
juniInetRouteDestType juniInetRouteDest juniInetRoutePfxLen juniInetRoutePolicy juniInetRouteNextHopType juniInetRouteNextHop juniInetRouteStaticPref
Column Syntax OID
juniInetRouteDestType
The type of the inetCidrRouteDest address, as defined
in the InetAddress MIB.

Only those address types that may appear in an actual
routing table are allowed as values of this object.
INET-ADDRESS-MIBInetAddressType
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.4874.2.2.82.1.1.1.1.1
juniInetRouteDest
The destination IP address of this route.

The type of this address is determined by the value of
the inetCidrRouteDestType object.

The values for the index objects inetCidrRouteDest and
ine…
INET-ADDRESS-MIBInetAddress
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.4874.2.2.82.1.1.1.1.2
juniInetRoutePfxLen
Indicates the number of leading one bits that form the
mask to be logical-ANDed with the destination address
before being compared to the value in the

inetCidrRouteDest field.

The values fo…
INET-ADDRESS-MIBInetAddressPrefixLength
Textual Convention: INET-ADDRESS-MIBInetAddressPrefixLength Unsigned32
Type Constraints:
range: 0..2040
 .1.3.6.1.4.1.4874.2.2.82.1.1.1.1.3
juniInetRoutePolicy
This object is an opaque object without any defined
semantics. Its purpose is to serve as an additional
index that may delineate between multiple entries to
the same destination. The value { 0 0 } shall be used
as the…
ObjectIdentifier .1.3.6.1.4.1.4874.2.2.82.1.1.1.1.4
juniInetRouteNextHopType
The type of the inetCidrRouteNextHop address, as
defined in the InetAddress MIB.

Value should be set to unknown(0) for non-remote
routes.

Only those address types that may appear in an actu…
INET-ADDRESS-MIBInetAddressType
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.4874.2.2.82.1.1.1.1.5
juniInetRouteNextHop
On remote routes, the address of the next system en

route. For non-remote routes, a zero length string.

The type of this address is determined by the value of
the inetCidrRouteNextHopType …
INET-ADDRESS-MIBInetAddress
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.4874.2.2.82.1.1.1.1.6
juniInetRouteStaticPref
The preference of this static route. Higher values correspond to
higher preference. A static route with preference of zero will never be
installed as an active route.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.4874.2.2.82.1.1.1.1.7
juniInetRouteStaticRowStatus
The row status variable, used according to row installation and removal
conventions.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.4874.2.2.82.1.1.1.1.8
juniInetRouteIfIndex
The ifIndex value that identifies the local interface
through which the next hop of this route should be
reached. A value of 0 is valid and represents the
scenario where no interface is specified.
IF-MIBInterfaceIndexOrZeror/w
Textual Convention: IF-MIBInterfaceIndexOrZero Integer32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.4874.2.2.82.1.1.1.1.9
juniInetRouteStaticStatus
The operational status of this static route.

active(0) indicates this route is currently being used to reach the
specified destination.

inactive(1) indicates this route is considered valid,…
Enumeration
Enumerated Values:
0active
1inactive
2incomplete
 .1.3.6.1.4.1.4874.2.2.82.1.1.1.1.10
juniInetRouteStaticNextHopAS
The Autonomous System Number of the Next Hop. The semantics of this
object are determined by the routing-protocol specified in the route's
ipCidrRouteProto value. When this object is unknown or not relevant its
value …
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4874.2.2.82.1.1.1.1.11
juniInetRouteStaticMetric
The primary routing metric for this route. The semantics of this
metric are determined by the routing-protocol specified in the route's
ipCidrRouteProto value. If this metric is not used, its value should be
set to -1.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4874.2.2.82.1.1.1.1.12
juniInetRouteStaticTag
A tag value for this static route.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.82.1.1.1.1.13
juniInetRouteStaticNullIntf
This variable configures a static route with null0 as nexthop to
reject/discard packets on the ingress
Enumerationr/w
Enumerated Values:
1discard
2reject
 .1.3.6.1.4.1.4874.2.2.82.1.1.1.1.14