Juniper-HDLC-MIB
The HDLC MIB for the Juniper Networks enterprise. This MIB provides
a means for configuring HDLC interfaces on top of various types of
interfaces, such as packet over SONET (POS) and high speed serial
interfaces (HSSI). Management objects are provided to query for an
available interface index, and to create/delete interfaces of this type.
Creating/deleting this interface type using this MIB has the side effect
of creating/deleting corresponding entries in the IF-MIB.ifTable, the
IF-MIB.ifXTable, and the Juniper-UNI-IF-MIB.juniIfTable.
- Source file
Juniper-HDLC-MIB- Last revised
- Identity
juniHdlcMIB- Base OID
1.3.6.1.4.1.4874.2.2.9
Imported Objects
| IF-MIB | InterfaceIndex InterfaceIndexOrZero |
| Juniper-MIBs | juniMibs |
| Juniper-TC | JuniNextIfIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE (no object page) OBJECT-GROUP (no object page) |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY (no object page) OBJECT-TYPE (no object page) |
| SNMPv2-TC | RowStatus |
Net-SNMP examples using the junose MIB directory Show commands
These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.
Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'Juniper-HDLC-MIB' -M '/opt/observium/mibs/junose:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'Juniper-HDLC-MIB::juniHdlcMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'Juniper-HDLC-MIB' -M '/opt/observium/mibs/junose:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'Juniper-HDLC-MIB::juniHdlcMIB'
Objects (19)
Showing 19 of 19 objects
Object legend
Object type
Icons distinguish tables, entry rows, columns, scalars, and structural nodes.
SNMPv2-TCTruthValue
Syntax
Blue badges identify the value syntax. Connected badges read as defining module and convention.
IF-MIBifIndex
Table index
Green identifies an index object; yellow names its module when the index is defined elsewhere.
r/w
deprecated
obsolete
Access and status
r/w means read-write. Grey labels mark definitions retained for compatibility.
OBS ✓
Observium use
The indicator appears only when Observium directly references that object.
ifOperStatus
.1.3.6.1.2.1…
Names and OIDs
Object names link to their detail pages. Hover or focus a linked name or badge for available definition details.
.1.3.6.1.4.1.4874.2.2.9 |
||
.1.3.6.1.4.1.4874.2.2.9.1 |
||
.1.3.6.1.4.1.4874.2.2.9.1.1 |
||
.1.3.6.1.4.1.4874.2.2.9.1.2 |
||
.1.3.6.1.4.1.4874.2.2.9.1.2.1 |
||
.1.3.6.1.4.1.4874.2.2.9.1.2.1.1 |
||
|
Enumeration
|
.1.3.6.1.4.1.4874.2.2.9.1.2.1.10 |
|
|
Enumeration
|
.1.3.6.1.4.1.4874.2.2.9.1.2.1.11 |
|
.1.3.6.1.4.1.4874.2.2.9.1.2.1.2 |
||
.1.3.6.1.4.1.4874.2.2.9.1.2.1.3 |
||
|
|
octetsInteger32
|
.1.3.6.1.4.1.4874.2.2.9.1.2.1.4 |
|
|
octetsInteger32
|
.1.3.6.1.4.1.4874.2.2.9.1.2.1.5 |
|
Enumeration
|
.1.3.6.1.4.1.4874.2.2.9.1.2.1.6 |
|
|
Enumeration
|
.1.3.6.1.4.1.4874.2.2.9.1.2.1.7 |
|
|
Enumeration
|
.1.3.6.1.4.1.4874.2.2.9.1.2.1.8 |
|
|
Enumeration
|
.1.3.6.1.4.1.4874.2.2.9.1.2.1.9 |
|
.1.3.6.1.4.1.4874.2.2.9.4 |
||
.1.3.6.1.4.1.4874.2.2.9.4.1 |
||
.1.3.6.1.4.1.4874.2.2.9.4.2 |
Dependencies (9) 6 direct · 3 transitive Show tree and compile order Hide dependency details
Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.
Dependency tree
Dependency-first compile order
- SNMPv2-SMIrfc
- SNMPv2-TCrfc
- IANAifType-MIBrfc
- SNMPv2-CONFrfc
- SNMPv2-MIBrfc
- IF-MIBrfc
- Juniper-UNI-SMIjunose
- Juniper-MIBsjunose
- Juniper-TCjunose
- Juniper-HDLC-MIBjunoseselected
Conformance Groups (4)
|
juniHdlcGroup
obsolete
|
juniHdlcNextIfIndex juniHdlcIfRowStatus juniHdlcIfLowerIfIndex juniHdlcIfMtu juniHdlcIfMru juniHdlcIfCrcSize
Obsolete collection of objects providing management of HDLC interfaces
in a Juniper product. This group became obsolete when juniHdlcIfDataPolarity was added. |
.1.3.6.1.4.1.4874.2.2.9.4.2.1
|
|
juniHdlcGroup2
obsolete
|
juniHdlcNextIfIndex juniHdlcIfRowStatus juniHdlcIfLowerIfIndex juniHdlcIfMtu juniHdlcIfMru juniHdlcIfCrcSize juniHdlcIfDataPolarity
Obsolete collection of objects providing management of HDLC interfaces
in a Juniper product. This group became obsolete when juniHdlcIfClockMode, juniHdlcIfClockRate, and juniHdlcIfForceDteAck were added. |
.1.3.6.1.4.1.4874.2.2.9.4.2.2
|
|
juniHdlcGroup3
obsolete
|
juniHdlcNextIfIndex juniHdlcIfRowStatus juniHdlcIfLowerIfIndex juniHdlcIfMtu juniHdlcIfMru juniHdlcIfCrcSize juniHdlcIfDataPolarity juniHdlcIfClockMode juniHdlcIfClockRate juniHdlcIfForceDteAck
Obsolete collection of objects providing management of HDLC interfaces
in a Juniper product. This group became obsolete when juniHdlcIfIdleCharacter was added. |
.1.3.6.1.4.1.4874.2.2.9.4.2.3
|
|
juniHdlcNextIfIndex juniHdlcIfRowStatus juniHdlcIfLowerIfIndex juniHdlcIfMtu juniHdlcIfMru juniHdlcIfCrcSize juniHdlcIfDataPolarity juniHdlcIfClockMode juniHdlcIfClockRate juniHdlcIfForceDteAck juniHdlcIfIdleCharacter
A collection of objects providing management of HDLC interfaces in a
Juniper product. |
.1.3.6.1.4.1.4874.2.2.9.4.2.4
|
Compliance Statements (4)
OID
.1.3.6.1.4.1.4874.2.2.9.4.1.1Obsolete compliance statement for entities that implement the Juniper
HDLC MIB. This compliance statement became obsolete when
juniHdlcIfDataPolarity was added.
HDLC MIB. This compliance statement became obsolete when
juniHdlcIfDataPolarity was added.
Required groups
| mandatory | juniHdlcGroup |
OID
.1.3.6.1.4.1.4874.2.2.9.4.1.2The compliance statement for entities that implement the Juniper HDLC
MIB. This compliance statement became obsolete when
juniHdlcIfClockMode, juniHdlcIfClockRate, and juniHdlcIfForceDteAck were
added.
MIB. This compliance statement became obsolete when
juniHdlcIfClockMode, juniHdlcIfClockRate, and juniHdlcIfForceDteAck were
added.
Required groups
| mandatory | juniHdlcGroup2 |
OID
.1.3.6.1.4.1.4874.2.2.9.4.1.3Obsolete compliance statement for entities that implement the Juniper
HDLC MIB. This compliance statement became obsolete when
juniHdlcIfIdleCharacter was added.
HDLC MIB. This compliance statement became obsolete when
juniHdlcIfIdleCharacter was added.
Required groups
| mandatory | juniHdlcGroup3 |
OID
.1.3.6.1.4.1.4874.2.2.9.4.1.4The compliance statement for entities that implement the Juniper HDLC
MIB.
MIB.
Required groups
| mandatory | juniHdlcGroup4 |