Juniper-FILE-XFER-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
1
Rows
1
Columns
12

juniFileXferTable

table
.1.3.6.1.4.1.4874.2.2.23.1.1 · 1 row entry · 12 columns
Open in standard view
Uses the junose variant from /opt/observium/mibs/junose.
Command help
Walk juniFileXferTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'Juniper-FILE-XFER-MIB' -M '/opt/observium/mibs/junose:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'Juniper-FILE-XFER-MIB::juniFileXferTable' 
A list of entries which describe file transfers.
juniFileXferTableEntry row .1.3.6.1.4.1.4874.2.2.23.1.1.1
A description of a particular file transfer entry.
Indexes
Column Syntax OID
juniFileXferIndex
A unique index used to identify this entry.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.4874.2.2.23.1.1.1.1
juniFileXferDirection
Specifies the direction of the file transfer.
Enumerationr/w
Enumerated Values:
1juniFileXferLocalToRemote
2juniFileXferRemoteToLocal
 .1.3.6.1.4.1.4874.2.2.23.1.1.1.2
juniFileXferFileType
Specifies the file type of the file transfer.
Enumerationr/w
Enumerated Values:
1juniFileXferSoftwareRelease
2juniFileXferSystemConfig
3juniFileXferRunningConfig
4juniFileXferSystemLog
5juniFileXferScript
6juniFileXferRebootHistory
7juniFileXferBulkStatistics
 .1.3.6.1.4.1.4874.2.2.23.1.1.1.3
juniFileXferRemoteFileName
The full path name of the source/destination file on the remote
system.
OctetStringr/w
Constraints:
range: 0-128
 .1.3.6.1.4.1.4874.2.2.23.1.1.1.4
juniFileXferRemoteUserNameobsolete
The user name to use when requesting the file transfer to/from the
remote system.

This object has been obsoleted. Use the enterprise host mib in order to
configure the username.
OctetStringr/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.4874.2.2.23.1.1.1.5
juniFileXferRemoteUserPasswordobsolete
The password to use when requesting the file transfer to/from the
remote system. When read, this object returns a zero string. Note
that, for security reasons, some FTP servers may insist on a non-zero
length user pas…
OctetStringr/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.4874.2.2.23.1.1.1.6
juniFileXferLocalFileName
The local file name to transfer or to create as a result of an incoming
transfer.
OctetStringr/w
Constraints:
range: 0-128
 .1.3.6.1.4.1.4874.2.2.23.1.1.1.7
juniFileXferProtocol
Specifies the file transfer protocol type.
Enumerationr/w
Enumerated Values:
1juniFileXferFtp
2juniFileXferTftp
 .1.3.6.1.4.1.4874.2.2.23.1.1.1.8
juniFileXferStatus
The status of the file transfer.
Enumeration
Enumerated Values:
1juniFileXferSuccessfulCompletion
2juniFileXferInProgress
3juniFileXferRemoteUnreachable
4juniFileXferUserAuthFailed
5juniFileXferFileNotFound
6juniFileXferFileTooBig
7juniFileXferFileIncompatible
8juniFileXferPended
9juniFileXferCopyRunningCfgFailed
 .1.3.6.1.4.1.4874.2.2.23.1.1.1.9
juniFileXferRowStatus
The row status object controls the creation/deletion of rows in this
table. Its semantics are the same as those for the RowStatus textual
convention specified for SNMPv2.

Setting this object to createAnd…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.4874.2.2.23.1.1.1.10
juniFileXferTimeStamp
The value of sysUpTime at the last status change for this entry.
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.23.1.1.1.11
juniFileXferRouterName
The name of the router to be used when resolving the hostname portion
of the juniFileXferRemoteFileName object. If this object contains an
invalid or empty value, the default router will be used.
Juniper-TCJuniNamer/w
Type Constraints:
range: 0..256
 .1.3.6.1.4.1.4874.2.2.23.1.1.1.12