Juniper-ETHERNET-MIB

        The Ethernet MIB for the Juniper Networks enterprise.  This MIB
contains managed objects for the Ethernet interfaces that extend the
IF-MIB.ifTable.  It also contains managed objects for creation of
Ethernet subInterfaces.
    
Source file
Juniper-ETHERNET-MIB
Last revised
Identity
juniEthernetMIB
Base OID
1.3.6.1.4.1.4874.2.2.34
Imported Objects
IF-MIB InterfaceIndex InterfaceIndexOrZero
Juniper-MIBs juniMibs
Juniper-TC JuniNextIfIndex
SNMPv2-CONF MODULE-COMPLIANCE (no object page) OBJECT-GROUP (no object page)
SNMPv2-SMI Integer32 MODULE-IDENTITY (no object page) OBJECT-TYPE (no object page) Unsigned32
SNMPv2-TC RowStatus TEXTUAL-CONVENTION (no object page) TruthValue
Net-SNMP examples using the junose MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'Juniper-ETHERNET-MIB' -M '/opt/observium/mibs/junose:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'Juniper-ETHERNET-MIB::juniEthernetMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'Juniper-ETHERNET-MIB' -M '/opt/observium/mibs/junose:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'Juniper-ETHERNET-MIB::juniEthernetMIB'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (53)
.1.3.6.1.4.1.4874.2.2.34
.1.3.6.1.4.1.4874.2.2.34.1
.1.3.6.1.4.1.4874.2.2.34.1.1
.1.3.6.1.4.1.4874.2.2.34.1.1.1
.1.3.6.1.4.1.4874.2.2.34.1.1.1.1
.1.3.6.1.4.1.4874.2.2.34.1.1.1.1.1
Enumeration
.1.3.6.1.4.1.4874.2.2.34.1.1.1.1.2
Enumeration
.1.3.6.1.4.1.4874.2.2.34.1.1.1.1.3
Integer32
.1.3.6.1.4.1.4874.2.2.34.1.1.1.1.4
Enumeration
.1.3.6.1.4.1.4874.2.2.34.1.1.1.1.5
.1.3.6.1.4.1.4874.2.2.34.1.1.1.1.6
.1.3.6.1.4.1.4874.2.2.34.1.1.1.1.7
Integer32
.1.3.6.1.4.1.4874.2.2.34.1.1.1.1.8
Integer32
.1.3.6.1.4.1.4874.2.2.34.1.1.1.1.9
.1.3.6.1.4.1.4874.2.2.34.1.2
.1.3.6.1.4.1.4874.2.2.34.1.2.1
.1.3.6.1.4.1.4874.2.2.34.1.2.2
.1.3.6.1.4.1.4874.2.2.34.1.2.2.1
.1.3.6.1.4.1.4874.2.2.34.1.2.2.1.1
.1.3.6.1.4.1.4874.2.2.34.1.2.2.1.2
.1.3.6.1.4.1.4874.2.2.34.1.2.2.1.3
Integer32
.1.3.6.1.4.1.4874.2.2.34.1.2.2.1.4
.1.3.6.1.4.1.4874.2.2.34.1.3
.1.3.6.1.4.1.4874.2.2.34.1.3.1
.1.3.6.1.4.1.4874.2.2.34.1.3.2
.1.3.6.1.4.1.4874.2.2.34.1.3.2.1
.1.3.6.1.4.1.4874.2.2.34.1.3.2.1.1
.1.3.6.1.4.1.4874.2.2.34.1.3.2.1.2
.1.3.6.1.4.1.4874.2.2.34.1.3.2.1.3
.1.3.6.1.4.1.4874.2.2.34.1.4
.1.3.6.1.4.1.4874.2.2.34.1.4.1
.1.3.6.1.4.1.4874.2.2.34.1.4.2
.1.3.6.1.4.1.4874.2.2.34.1.4.2.1
.1.3.6.1.4.1.4874.2.2.34.1.4.2.1.1
Integer32
.1.3.6.1.4.1.4874.2.2.34.1.4.2.1.2
.1.3.6.1.4.1.4874.2.2.34.1.4.2.1.3
.1.3.6.1.4.1.4874.2.2.34.1.4.2.1.4
.1.3.6.1.4.1.4874.2.2.34.1.4.2.1.5
Integer32
.1.3.6.1.4.1.4874.2.2.34.1.4.2.1.6
Enumeration
.1.3.6.1.4.1.4874.2.2.34.1.4.2.1.7
Integer32
.1.3.6.1.4.1.4874.2.2.34.1.4.2.1.8
Integer32
.1.3.6.1.4.1.4874.2.2.34.1.4.2.1.9
.1.3.6.1.4.1.4874.2.2.34.1.5
.1.3.6.1.4.1.4874.2.2.34.1.5.1
.1.3.6.1.4.1.4874.2.2.34.1.5.1.1
.1.3.6.1.4.1.4874.2.2.34.1.5.1.1.1
percentUnsigned32
.1.3.6.1.4.1.4874.2.2.34.1.5.1.1.2
percentUnsigned32
.1.3.6.1.4.1.4874.2.2.34.1.5.1.1.3
.1.3.6.1.4.1.4874.2.2.34.1.6
.1.3.6.1.4.1.4874.2.2.34.1.6.1
.1.3.6.1.4.1.4874.2.2.34.4
.1.3.6.1.4.1.4874.2.2.34.4.1
.1.3.6.1.4.1.4874.2.2.34.4.2
Dependencies (9) 6 direct · 3 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Dependency-first compile order
  1. SNMPv2-SMIrfc
  2. SNMPv2-TCrfc
  3. IANAifType-MIBrfc
  4. SNMPv2-CONFrfc
  5. SNMPv2-MIBrfc
  6. IF-MIBrfc
  7. Juniper-UNI-SMIjunose
  8. Juniper-MIBsjunose
  9. Juniper-TCjunose
  10. Juniper-ETHERNET-MIBjunoseselected
Type Definitions (1)
Enumeration
mauNotPresent(0)
mauNotSupported(1)
mau10BaseT(2)
mau100BaseTx(3)
mau1000BaseT(4)
mau1000BaseCx(5)
mau1000BaseSx(6)
mau1000BaseLx(7)
mau1000BaseZx(8)
mauSfpUnknown(9)
mauSfpNotPresent(10)
mau100BaseFxSm(11)
mau100BaseFxMm(12)
mauSfpNotJnprCompliant(13)
mau10000BaseSr(14)
mau10000BaseLr(15)
mau10000BaseEr(16)
mauXfpUnknown(17)
mauXfpNotPresent(18)
mauXfpNotJnprCompliant(19)
Conformance Groups (8)
Obsolete collection of objects providing management of Ethernet
interfaces in a Juniper product. This group became obsolete when MAU
type and length support was added.
.1.3.6.1.4.1.4874.2.2.34.4.2.1
A collection of objects providing management of Ethernet SubInterfaces
in a Juniper product.
.1.3.6.1.4.1.4874.2.2.34.4.2.2
A collection of objects providing management of Major VLAN interfaces
in a Juniper product.
.1.3.6.1.4.1.4874.2.2.34.4.2.3
Obsolete collection of objects providing management of VLAN
SubInterfaces in a Juniper product. This group became obsolete when
VLAN stack support was added.
.1.3.6.1.4.1.4874.2.2.34.4.2.4
A collection of objects providing management of VLAN SubInterfaces in a
Juniper product.
.1.3.6.1.4.1.4874.2.2.34.4.2.5
A collection of objects providing management of Ethernet interfaces in
a Juniper product.
.1.3.6.1.4.1.4874.2.2.34.4.2.6
A collection of objects providing Ethernet interface statistics in
a Juniper product.
.1.3.6.1.4.1.4874.2.2.34.4.2.7
A collection of objects providing management of LAG interfaces in
a Juniper product.
.1.3.6.1.4.1.4874.2.2.34.4.2.8
Compliance Statements (6)

OID .1.3.6.1.4.1.4874.2.2.34.4.1.1
Obsolete compliance statement for entities which implement the Juniper
Ethernet MIB. This statement became obsolete when support for VLANs was
added.
Required groups

OID .1.3.6.1.4.1.4874.2.2.34.4.1.2
Obsolete compliance statement for entities which implement the Juniper
Ethernet MIB. This statement became obsolete when VLAN stack support
was added.
Required groups
mandatory juniEthernetGroup
mandatory juniEthernetSubIfGroup
optional juniVlanGroup The juniVlanGroup is mandatory only for entities that support
VLAN interfaces.
optional juniVlanSubIfGroup The juniVlanSubIfGroup is mandatory only for entities that
support a subinterface to major interface layer model for VLAN
interfaces.

OID .1.3.6.1.4.1.4874.2.2.34.4.1.3
Obsolete compliance statement for entities which implement the Juniper
Ethernet MIB. This statement became obsolete when MAU type and length
support was added.
Required groups
mandatory juniEthernetGroup
mandatory juniEthernetSubIfGroup
optional juniVlanGroup The juniVlanGroup is mandatory only for entities that support
VLAN interfaces.
optional juniVlanSubIfGroup2 This group is mandatory only for entities that support a
subinterface to major interface layer model for VLAN
interfaces.

OID .1.3.6.1.4.1.4874.2.2.34.4.1.4
The compliance statement for entities which implement the Juniper
Ethernet MIB. This statement became obsolete when Ethernet interface
statistics support was added.
Required groups
mandatory juniEthernetGroup2
mandatory juniEthernetSubIfGroup
optional juniVlanGroup The juniVlanGroup is mandatory only for entities that support
VLAN interfaces.
optional juniVlanSubIfGroup2 This group is mandatory only for entities that support a
subinterface to major interface layer model for VLAN
interfaces.

OID .1.3.6.1.4.1.4874.2.2.34.4.1.5
The compliance statement for entities which implement the Juniper
Ethernet MIB.
Required groups
mandatory juniEthernetGroup2
mandatory juniEthernetSubIfGroup
mandatory juniEthernetIfStatsGroup
optional juniVlanGroup The juniVlanGroup is mandatory only for entities that support
VLAN interfaces.
optional juniVlanSubIfGroup2 This group is mandatory only for entities that support a
subinterface to major interface layer model for VLAN
interfaces.

OID .1.3.6.1.4.1.4874.2.2.34.4.1.6
The compliance statement for entities which implement the Juniper
Ethernet MIB.
Required groups
mandatory juniEthernetGroup2
mandatory juniEthernetSubIfGroup
mandatory juniEthernetIfStatsGroup
optional juniVlanGroup The juniVlanGroup is mandatory only for entities that support
VLAN interfaces.
optional juniVlanSubIfGroup2 This group is mandatory only for entities that support a
subinterface to major interface layer model for VLAN
interfaces.
optional juniLagIfGroup The juniLagIfGroup is mandatory only for entities that support
LAG interfaces.