Juniper-DS1-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
2
Rows
2
Columns
31

juniDsx1ConfigTable

table
.1.3.6.1.4.1.4874.2.2.5.1.1 · 1 row entry · 22 columns
Open in standard view
Uses the junose variant from /opt/observium/mibs/junose.
Command help
Walk juniDsx1ConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'Juniper-DS1-MIB' -M '/opt/observium/mibs/junose:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'Juniper-DS1-MIB::juniDsx1ConfigTable' 
This table contains entries for DS1/E1 interfaces present in the
system.
juniDsx1ConfigEntry row .1.3.6.1.4.1.4874.2.2.5.1.1.1
Each entry describes the characteristics of an DS1/E1 interface.
Indexes
Column Syntax OID
juniDsx1TimeSlotMap
A bitmap representing the timeslots on the DS1/E1 interface that have
been allocated for service.

For channelized DS1/E1, set bits reflect the union of timeslot
allocations across all fractional arrangeme…
Juniper-TCJuniTimeSlotMap
Type Constraints:
range: 4
 .1.3.6.1.4.1.4874.2.2.5.1.1.1.1
juniDsx1Ds1ChannelNumber
This variable represents the channel number of the DS1/E1 on its parent
DS3/E3. A value of 0 indicates this DS1/E1 does not have a parent
DS3/E3.
Integer32r/w
Constraints:
range: 0-28
 .1.3.6.1.4.1.4874.2.2.5.1.1.1.2
juniDsx1Capabilities
A value which indicates the set of capabilities of the DS1/E1
interface.

The value is a sum. This sum initially takes the value zero. Then, for
each capability, C, in the range 1 through 3, that this in…
Integer32
Constraints:
range: 0-7
 .1.3.6.1.4.1.4874.2.2.5.1.1.1.3
juniDsx1Mode
This variable represents the DS1/E1 interface mode. The value of the
juniDsx1Capabilities object for the DS1/E1 interface indicates the valid
set of values for this object.
Enumerationr/w
Enumerated Values:
1t1
2e1
3j1
 .1.3.6.1.4.1.4874.2.2.5.1.1.1.4
juniDsx1LineBuildOutCapabilities
A value which indicates the set of line build out capabilities of the
DS1/E1 interface.

The value is a sum. This sum initially takes the value zero. Then, for
each line build out capability, C, in the r…
Integer32
Constraints:
range: 0-3
 .1.3.6.1.4.1.4874.2.2.5.1.1.1.5
juniDsx1LineBuildOutType
This variable represents the configured line build out type of the
DS1/E1 interface. The value of the juniDsx1LineBuildOutCapabilities
object for the DS1/E1 interface indicates the valid set of values for
this object.
Enumerationr/w
Enumerated Values:
1shortHaul
2longHaul
3notSupported
 .1.3.6.1.4.1.4874.2.2.5.1.1.1.6
juniDsx1LineAttenuation
This variable represents the configured line attenuation of the DS1/E1
interface. Note that the value of this object only takes effect when
the value of the juniDsx1LineBuildOutType for the DS1/E1 interface is
set to l…
Enumerationr/w
Enumerated Values:
1db0
2dbMinus7Point5
3dbMinus15
4dbMinus22Point5
5notSupported
 .1.3.6.1.4.1.4874.2.2.5.1.1.1.7
juniDsx1LineLength
This variable represents the length of the DS1/E1 line in meters. Note
that the value of this object only takes effect when the value of the
juniDsx1LineBuildOutType for the DS1/E1 interface is set to
shortHaul(1).
metersInteger32r/w
Constraints:
range: 0-64000
 .1.3.6.1.4.1.4874.2.2.5.1.1.1.8
juniDsx1LowerIfIndex
The ifIndex of the interface over which this Dsx1 interface is to be
layered. A value of zero indicates no layering. An implementation may
choose to require that a nonzero value be configured at entry creation.
IF-MIBInterfaceIndexOrZeror/w
Type Constraints:
range: 0..2147483647
Description:
This textual convention is an extension of the
InterfaceIndex convention. The latter defines a greater
than zero value used to identify an interface or interface
sub-layer in the managed system. This extension permits…
 .1.3.6.1.4.1.4874.2.2.5.1.1.1.9
juniDsx1RowStatus
Controls creation/deletion of entries in this table according to the
RowStatus textual convention, constrained to support the following
values only:
createAndGo
destroy

To create an entry in this …
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.4874.2.2.5.1.1.1.10
juniDsx1SendCode
This variable indicates what type of code is being sent across the DS1
interface by the device.
Enumerationr/w
Enumerated Values:
1sendInbandLineCode
2sendBellcoreLineCode
3sendBellcoreInbandLineCode
4sendQRSPattern
5sendAllZerosPattern
6sendAllOnesPattern
7sendAltZeroOnePattern
8sendTwo11Pattern
9sendTwo15Pattern
10sendTwo20Pattern
11sendTwo23Pattern
12sendUnfrQRSPattern
13sendUnfrAllZerosPattern
14sendUnfrAllOnesPattern
15sendUnfrAltZeroOnePattern
16sendUnfrTwo11Pattern
17sendUnfrTwo15Pattern
18sendUnfrTwo20Pattern
19sendUnfrTwo23Pattern
20otherPattern
 .1.3.6.1.4.1.4874.2.2.5.1.1.1.11
juniDsx1YellowAlarm
This bitmap indicates the yellow alarm settings, and is the sum of the
capabilities.
Enumerationr/w
Enumerated Values:
1generate
2detect
3generateAndDetect
4none
 .1.3.6.1.4.1.4874.2.2.5.1.1.1.12
juniDsx1RemoteLoopback
This variable indicates the remote loopback setting.
Enumerationr/w
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.4874.2.2.5.1.1.1.13
juniDsx1FdlCarrier
Specifies the interface is used in carrier environment.
Enumerationr/w
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.4874.2.2.5.1.1.1.14
juniDsx1FdlEic
This is the equipment identification code.
OctetStringr/w
Constraints:
range: 0-10
 .1.3.6.1.4.1.4874.2.2.5.1.1.1.15
juniDsx1FdlLic
This is the location identification code.
OctetStringr/w
Constraints:
range: 0-11
 .1.3.6.1.4.1.4874.2.2.5.1.1.1.16
juniDsx1FdlFic
This is the frame identification code.
OctetStringr/w
Constraints:
range: 0-10
 .1.3.6.1.4.1.4874.2.2.5.1.1.1.17
juniDsx1FdlUnit
This is the unit identification code.
OctetStringr/w
Constraints:
range: 0-6
 .1.3.6.1.4.1.4874.2.2.5.1.1.1.18
juniDsx1FdlPfi
This is the facility identification code.
OctetStringr/w
Constraints:
range: 0-38
 .1.3.6.1.4.1.4874.2.2.5.1.1.1.19
juniDsx1FdlPort
This is the equipment port number.
OctetStringr/w
Constraints:
range: 0-4
 .1.3.6.1.4.1.4874.2.2.5.1.1.1.20
juniDsx1FdlGenerator
This is the generator number.
OctetStringr/w
Constraints:
range: 0-38
 .1.3.6.1.4.1.4874.2.2.5.1.1.1.21
juniDsx1FdlTransmit
Specifies transmission enabling.
path - Bit 0 for path transmit. When this bit is set
indicates path transmit is enabled; otherwise
path transmit disabled.
idlesignal - Bit 1 for idlesig…
Bitsr/w
Enumerated Values:
0path
1idlesignal
2testsignal
 .1.3.6.1.4.1.4874.2.2.5.1.1.1.22

juniDsx1FarEndConfigTable

table
.1.3.6.1.4.1.4874.2.2.5.1.3 · 1 row entry · 9 columns
Open in standard view
Uses the junose variant from /opt/observium/mibs/junose.
Command help
Walk juniDsx1FarEndConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'Juniper-DS1-MIB' -M '/opt/observium/mibs/junose:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'Juniper-DS1-MIB::juniDsx1FarEndConfigTable' 
The DS1 Far End Configuration table.
juniDsx1FarEndConfigEntry row .1.3.6.1.4.1.4874.2.2.5.1.3.1
An entry in the DS1 Far End Configuration table.
Indexes
Column Syntax OID
juniDsx1FarEndLineIndex
The index value which uniquely identifies the DS1 interface to which
this entry is applicable. The interface identified by a particular
value of this index is the same interface as identified by the same
value a dsx1Li…
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.4874.2.2.5.1.3.1.1
juniDsx1FarEndEquipCode
This is the Far End Equipment Identification code that describes the
specific piece of equipment. It is sent within the Path Identification
Message.
OctetString
Constraints:
range: 0-10
 .1.3.6.1.4.1.4874.2.2.5.1.3.1.2
juniDsx1FarEndLocationIDCode
This is the Far End Location Identification code that describes the
specific location of the equipment. It is sent within the Path
Identification Message.
OctetString
Constraints:
range: 0-11
 .1.3.6.1.4.1.4874.2.2.5.1.3.1.3
juniDsx1FarEndFrameIDCode
This is the Far End Frame Identification code that identifies where the
equipment is located within a building at a given location. It is sent
within the Path Identification Message.
OctetString
Constraints:
range: 0-10
 .1.3.6.1.4.1.4874.2.2.5.1.3.1.4
juniDsx1FarEndUnitCode
This is the Far End code that identifies the equipment location within
a bay. It is sent within the Path Identification Message.
OctetString
Constraints:
range: 0-6
 .1.3.6.1.4.1.4874.2.2.5.1.3.1.5
juniDsx1FarEndFacilityIDCode
This code identifies a specific Far End DS1 path. It is sent within
the Path Identification Message.
OctetString
Constraints:
range: 0-38
 .1.3.6.1.4.1.4874.2.2.5.1.3.1.6
juniDsx1FarEndPortNumber
This code identifies the port number of the Far End DS1. It is sent
within the Idle Signal Message.
OctetString
Constraints:
range: 0-4
 .1.3.6.1.4.1.4874.2.2.5.1.3.1.7
juniDsx1FarEndGeneratorNumber
This code identifies the Far End DS1 Generator Number. It is sent
within the Test Signal Message.
OctetString
Constraints:
range: 0-38
 .1.3.6.1.4.1.4874.2.2.5.1.3.1.8
juniDsx1FarEndCarrier
Specifies the interface is used in carrier environment. It is sent
with all FDL messages.
Enumeration
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.4874.2.2.5.1.3.1.9