Juniper-DOS-PROTECTION-PLATFORM-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
5
Rows
5
Columns
43
.1.3.6.1.4.1.4874.2.2.81.1.1.1 · 1 row entry · 4 columns
Uses the junose variant from /opt/observium/mibs/junose.
Command help
Walk juniDosProtectionScfdsSlotProtocolTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'Juniper-DOS-PROTECTION-PLATFORM-MIB' -M '/opt/observium/mibs/junose:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'Juniper-DOS-PROTECTION-PLATFORM-MIB::juniDosProtectionScfdsSlotProtocolTable'
The information for the DOS protection control protocols 
for a specific slot.
juniDosProtectionScfdsSlotProtocolEntry row .1.3.6.1.4.1.4874.2.2.81.1.1.1.1
The information for an individual control protocol on
a specific slot.
Column Syntax OID
The slot value for the entry.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4874.2.2.81.1.1.1.1.1
The control protocol value for the entry.
Juniper-DOS-PROTECTION-MIBJuniDosProtectionProtocolType
Type Values:
0pppEchoRequest
1ppEchoReply
2pppEchoReplyFast
3pppControl
4atmControl
5atmOam
6atmDynamicIf
7atmInverseArp
8frameRelayControl
9frameRelayArp
10pppoeControl
11pppoePppConfig
12ethernetArpMiss
13ethernetArp
14ethernetFcBasedArp
15ethernetLacp
16ethernetOam
17ethernetDynamicIf
18ethernetPppTerminate
19slepSlarp
20slepSlarpReplyFast
21mplsTtlOnReceive
22mplsTtlOnTransmit
23mplsMtuExceeded
24itmL2tpControl
25flisInPayload
26flisInPayloadUpdateTable
27dhcpExternal
28ipOsi
29ipTtlExpired
30ipOptionsOther
31ipOptionsRouterAlert
32ipMulticastBroadcastOther
33ipMulticastDhcpSc
34ipMulticastControlSc
35ipMulticastControlIc
36ipMulticastVrrp
37ipMulticastCacheMiss
38ipMulticastCacheMissAutoReply
39ipMulticastWrongIf
40ipLocalDhcpSc
41ipLocalDhcpIc
42ipLocalIcmpEcho
43ipLocalIcmpOther
44ipLocalLDP
45ipLocalBgp
46ipLocalOspf
47ipLocalRsvp
48ipLocalPim
49ipLocalCops
50ipLocalL2tpControlSc
51ipLocalL2tpControlIc
52ipLocalOther
53ipLocalDemuxMiss
54ipRouteToSrpEthernet
55ipRouteNoRoute
56ipNull0Interface
57ipNormalPathMtu
58ipNeighborDiscovery
59ipNeighborDiscoveryMiss
60ipSearchError
61ipMld
62ipLocalPimAssert
63ipLocalBfd
64ipFastBfd
65ipLocalFastBfd
66ipIke
67ipReassembly
68ipLocalIcmpFragment
69ipLocalFragment
70ipAppClassifierHttpRedirect
71ipMulticastDhcpIc
72dhcpTesterIc
73atmDynamicIfPppData
74ipLocalLspPing
.1.3.6.1.4.1.4874.2.2.81.1.1.1.1.2
The current state of the protocol. This object will return inTrouble(2)
if the specific slot referenced is reporting that the protocol is currently
being watched for suspicious flows. If the module is not reporting tha…
Juniper-DOS-PROTECTION-MIBJuniDosProtectionProtocolState
Type Values:
1ok
2inTrouble
.1.3.6.1.4.1.4874.2.2.81.1.1.1.1.3
The number of transitions to 'inTrouble' that this control protocol
has made for this slot.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4874.2.2.81.1.1.1.1.4
.1.3.6.1.4.1.4874.2.2.81.1.1.2 · 1 row entry · 10 columns
Uses the junose variant from /opt/observium/mibs/junose.
Command help
Walk juniDosProtectionScfdsSlotFlowTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'Juniper-DOS-PROTECTION-PLATFORM-MIB' -M '/opt/observium/mibs/junose:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'Juniper-DOS-PROTECTION-PLATFORM-MIB::juniDosProtectionScfdsSlotFlowTable'
Information about suspicious control flows.
juniDosProtectionScfdsSlotFlowEntry row .1.3.6.1.4.1.4874.2.2.81.1.1.2.1
Information about a suspicious control flow.
Column Syntax OID
The slot value for the flow.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4874.2.2.81.1.1.2.1.1
The ifIndex value for the flow. For group flows, this value
will be zero.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
.1.3.6.1.4.1.4874.2.2.81.1.1.2.1.2
The group id for the flow. The group id will be zero for an individual
flow. It is non-zero when the entry represents a group of flows.
Unsigned32
Constraints:
range: 0-15
.1.3.6.1.4.1.4874.2.2.81.1.1.2.1.3
The control protocol for the flow.
Juniper-DOS-PROTECTION-MIBJuniDosProtectionProtocolType
Type Values:
0pppEchoRequest
1ppEchoReply
2pppEchoReplyFast
3pppControl
4atmControl
5atmOam
6atmDynamicIf
7atmInverseArp
8frameRelayControl
9frameRelayArp
10pppoeControl
11pppoePppConfig
12ethernetArpMiss
13ethernetArp
14ethernetFcBasedArp
15ethernetLacp
16ethernetOam
17ethernetDynamicIf
18ethernetPppTerminate
19slepSlarp
20slepSlarpReplyFast
21mplsTtlOnReceive
22mplsTtlOnTransmit
23mplsMtuExceeded
24itmL2tpControl
25flisInPayload
26flisInPayloadUpdateTable
27dhcpExternal
28ipOsi
29ipTtlExpired
30ipOptionsOther
31ipOptionsRouterAlert
32ipMulticastBroadcastOther
33ipMulticastDhcpSc
34ipMulticastControlSc
35ipMulticastControlIc
36ipMulticastVrrp
37ipMulticastCacheMiss
38ipMulticastCacheMissAutoReply
39ipMulticastWrongIf
40ipLocalDhcpSc
41ipLocalDhcpIc
42ipLocalIcmpEcho
43ipLocalIcmpOther
44ipLocalLDP
45ipLocalBgp
46ipLocalOspf
47ipLocalRsvp
48ipLocalPim
49ipLocalCops
50ipLocalL2tpControlSc
51ipLocalL2tpControlIc
52ipLocalOther
53ipLocalDemuxMiss
54ipRouteToSrpEthernet
55ipRouteNoRoute
56ipNull0Interface
57ipNormalPathMtu
58ipNeighborDiscovery
59ipNeighborDiscoveryMiss
60ipSearchError
61ipMld
62ipLocalPimAssert
63ipLocalBfd
64ipFastBfd
65ipLocalFastBfd
66ipIke
67ipReassembly
68ipLocalIcmpFragment
69ipLocalFragment
70ipAppClassifierHttpRedirect
71ipMulticastDhcpIc
72dhcpTesterIc
73atmDynamicIfPppData
74ipLocalLspPing
.1.3.6.1.4.1.4874.2.2.81.1.1.2.1.4
The current rate in packets per second for the flow.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4874.2.2.81.1.1.2.1.5
The peak rate in packets per second for the flow.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4874.2.2.81.1.1.2.1.6
The sysUpTime value for the time when the flow was
determined to be suspicious.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4874.2.2.81.1.1.2.1.7
For control flow that are monitored on the egress
processor in the forwarding path, this value will
indicate the possible ingress slot for data stream that
is possibly causing this suspicious flow control. This
objec…
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.4874.2.2.81.1.1.2.1.8
Indicates whether the flow is a group flow or not. A value of
true(1) indicates that the flow represents a group of flows.
A value of false(2) indicates that the flow is an individual flow.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.4874.2.2.81.1.1.2.1.9
When set to clear(1), the suspicious control flow
is removed from the suspicious control flow table. When set to
ok(0), there is no effect and the suspicious control flow
is unchanged.

When read, a…
Enumerationr/w
Enumerated Values:
0ok
1clear
.1.3.6.1.4.1.4874.2.2.81.1.1.2.1.10
.1.3.6.1.4.1.4874.2.2.81.1.1.3 · 1 row entry · 11 columns
Uses the junose variant from /opt/observium/mibs/junose.
Command help
Walk juniDosProtectionScfdsSlotTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'Juniper-DOS-PROTECTION-PLATFORM-MIB' -M '/opt/observium/mibs/junose:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'Juniper-DOS-PROTECTION-PLATFORM-MIB::juniDosProtectionScfdsSlotTable'
The suspicious control flow information for each slot.
juniDosProtectionScfdsSlotEntry row .1.3.6.1.4.1.4874.2.2.81.1.1.3.1
The information for a specific slot.
Column Syntax OID
The slot value for this entry.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4874.2.2.81.1.1.3.1.1
When set to clear(1), the suspicious control flow detection system
is cleared for this slot. When set to ok(0), there is no effect and the
suspicious control flow detection system is unchanged.

By…
Enumerationr/w
Enumerated Values:
0ok
1clear
.1.3.6.1.4.1.4874.2.2.81.1.1.3.1.2
The sysUpTime at which the counters were re-adjusted due to
slot restart.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4874.2.2.81.1.1.3.1.3
Indicates whether this slot is under a resource
shortage situation. A value of notOverflowingOrGrouping(1) indicates
that there is no resource shortage on the slot. A value of
grouping(2) or overflowing(3) indicates t…
Juniper-DOS-PROTECTION-MIBJuniDosProtectionScfdsTableOverflowState
Type Values:
1notOverflowingOrGrouping
2grouping
3overflowing
.1.3.6.1.4.1.4874.2.2.81.1.1.3.1.4
The number of flows currently marked as suspicious for this slot.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4874.2.2.81.1.1.3.1.5
The number of suspicious flows seen on this slot, since slot restart
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4874.2.2.81.1.1.3.1.6
The number of suspicius flow groups seen on this slot since slot
restart.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4874.2.2.81.1.1.3.1.7
The number of flows currently falsely considered suspicious for
this slot.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4874.2.2.81.1.1.3.1.8
The number of flows currently falsely considered suspicious on
this slot.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4874.2.2.81.1.1.3.1.9
The number of suspicious flows seen on this slot, since this
slot restart.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4874.2.2.81.1.1.3.1.10
The number of times this slot has had a table overflow.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4874.2.2.81.1.1.3.1.11
.1.3.6.1.4.1.4874.2.2.81.1.1.4 · 1 row entry · 11 columns
Uses the junose variant from /opt/observium/mibs/junose.
Command help
Walk juniDosProtectionScfdsSlotFlowMacTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'Juniper-DOS-PROTECTION-PLATFORM-MIB' -M '/opt/observium/mibs/junose:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'Juniper-DOS-PROTECTION-PLATFORM-MIB::juniDosProtectionScfdsSlotFlowMacTable'
Information about suspicious control flows.
juniDosProtectionScfdsSlotFlowMacEntry row .1.3.6.1.4.1.4874.2.2.81.1.1.4.1
Information about a suspicious control flow.
Column Syntax OID
The slot value for the flow.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4874.2.2.81.1.1.4.1.1
The ifIndex value for the flow. For group flows, this value
will be zero.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
.1.3.6.1.4.1.4874.2.2.81.1.1.4.1.2
The group id for the flow. The group id will be zero for an individual
flow. It is non-zero when the entry represents a group of flows.
Unsigned32
Constraints:
range: 0-15
.1.3.6.1.4.1.4874.2.2.81.1.1.4.1.3
The control protocol for the flow.
Juniper-DOS-PROTECTION-MIBJuniDosProtectionProtocolType
Type Values:
0pppEchoRequest
1ppEchoReply
2pppEchoReplyFast
3pppControl
4atmControl
5atmOam
6atmDynamicIf
7atmInverseArp
8frameRelayControl
9frameRelayArp
10pppoeControl
11pppoePppConfig
12ethernetArpMiss
13ethernetArp
14ethernetFcBasedArp
15ethernetLacp
16ethernetOam
17ethernetDynamicIf
18ethernetPppTerminate
19slepSlarp
20slepSlarpReplyFast
21mplsTtlOnReceive
22mplsTtlOnTransmit
23mplsMtuExceeded
24itmL2tpControl
25flisInPayload
26flisInPayloadUpdateTable
27dhcpExternal
28ipOsi
29ipTtlExpired
30ipOptionsOther
31ipOptionsRouterAlert
32ipMulticastBroadcastOther
33ipMulticastDhcpSc
34ipMulticastControlSc
35ipMulticastControlIc
36ipMulticastVrrp
37ipMulticastCacheMiss
38ipMulticastCacheMissAutoReply
39ipMulticastWrongIf
40ipLocalDhcpSc
41ipLocalDhcpIc
42ipLocalIcmpEcho
43ipLocalIcmpOther
44ipLocalLDP
45ipLocalBgp
46ipLocalOspf
47ipLocalRsvp
48ipLocalPim
49ipLocalCops
50ipLocalL2tpControlSc
51ipLocalL2tpControlIc
52ipLocalOther
53ipLocalDemuxMiss
54ipRouteToSrpEthernet
55ipRouteNoRoute
56ipNull0Interface
57ipNormalPathMtu
58ipNeighborDiscovery
59ipNeighborDiscoveryMiss
60ipSearchError
61ipMld
62ipLocalPimAssert
63ipLocalBfd
64ipFastBfd
65ipLocalFastBfd
66ipIke
67ipReassembly
68ipLocalIcmpFragment
69ipLocalFragment
70ipAppClassifierHttpRedirect
71ipMulticastDhcpIc
72dhcpTesterIc
73atmDynamicIfPppData
74ipLocalLspPing
.1.3.6.1.4.1.4874.2.2.81.1.1.4.1.4
The source MAC address for the flow. A null
source MAC address indicates that no source
physical address was available.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.4874.2.2.81.1.1.4.1.5
The current rate in packets per second for the flow.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4874.2.2.81.1.1.4.1.6
The peak rate in packets per second for the flow.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4874.2.2.81.1.1.4.1.7
The sysUpTime value for the time when the flow was
determined to be suspicious.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4874.2.2.81.1.1.4.1.8
For control flow that are monitored on the egress
processor in the forwarding path, this value will
indicate the possible ingress slot for data stream that
is possibly causing this suspicious flow control. This
objec…
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.4874.2.2.81.1.1.4.1.9
Indicates whether the flow is a group flow or not. A value of
true(1) indicates that the flow represents a group of flows.
A value of false(0) indicates that the flow is an individual flow.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.4874.2.2.81.1.1.4.1.10
When set to clear(1), the suspicious control flow
is removed from the suspicious control flow table. When set to
ok(0), there is no effect and the suspicious control flow
is unchanged.

When read, a…
Enumerationr/w
Enumerated Values:
0ok
1clear
.1.3.6.1.4.1.4874.2.2.81.1.1.4.1.11
.1.3.6.1.4.1.4874.2.2.81.1.2.1 · 1 row entry · 7 columns
Uses the junose variant from /opt/observium/mibs/junose.
Command help
Walk juniDosProtectionDpgSlotRateTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'Juniper-DOS-PROTECTION-PLATFORM-MIB' -M '/opt/observium/mibs/junose:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'Juniper-DOS-PROTECTION-PLATFORM-MIB::juniDosProtectionDpgSlotRateTable'
This table provides information about the calculated minimum
rates (as well as the maximum rates) for each dos-protection-group 
control protocol for each line module.
juniDosProtectionDpgSlotRateEntry row .1.3.6.1.4.1.4874.2.2.81.1.2.1.1
The rates for an individual dos-protection-group on an line
module for a control protocol.
Column Syntax OID
The slot value for this entry.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4874.2.2.81.1.2.1.1.1
The dos-protection-group name for this entry.
OctetString
Constraints:
range: 1-32
.1.3.6.1.4.1.4874.2.2.81.1.2.1.1.2
The control protocol for this entry.
Juniper-DOS-PROTECTION-MIBJuniDosProtectionProtocolType
Type Values:
0pppEchoRequest
1ppEchoReply
2pppEchoReplyFast
3pppControl
4atmControl
5atmOam
6atmDynamicIf
7atmInverseArp
8frameRelayControl
9frameRelayArp
10pppoeControl
11pppoePppConfig
12ethernetArpMiss
13ethernetArp
14ethernetFcBasedArp
15ethernetLacp
16ethernetOam
17ethernetDynamicIf
18ethernetPppTerminate
19slepSlarp
20slepSlarpReplyFast
21mplsTtlOnReceive
22mplsTtlOnTransmit
23mplsMtuExceeded
24itmL2tpControl
25flisInPayload
26flisInPayloadUpdateTable
27dhcpExternal
28ipOsi
29ipTtlExpired
30ipOptionsOther
31ipOptionsRouterAlert
32ipMulticastBroadcastOther
33ipMulticastDhcpSc
34ipMulticastControlSc
35ipMulticastControlIc
36ipMulticastVrrp
37ipMulticastCacheMiss
38ipMulticastCacheMissAutoReply
39ipMulticastWrongIf
40ipLocalDhcpSc
41ipLocalDhcpIc
42ipLocalIcmpEcho
43ipLocalIcmpOther
44ipLocalLDP
45ipLocalBgp
46ipLocalOspf
47ipLocalRsvp
48ipLocalPim
49ipLocalCops
50ipLocalL2tpControlSc
51ipLocalL2tpControlIc
52ipLocalOther
53ipLocalDemuxMiss
54ipRouteToSrpEthernet
55ipRouteNoRoute
56ipNull0Interface
57ipNormalPathMtu
58ipNeighborDiscovery
59ipNeighborDiscoveryMiss
60ipSearchError
61ipMld
62ipLocalPimAssert
63ipLocalBfd
64ipFastBfd
65ipLocalFastBfd
66ipIke
67ipReassembly
68ipLocalIcmpFragment
69ipLocalFragment
70ipAppClassifierHttpRedirect
71ipMulticastDhcpIc
72dhcpTesterIc
73atmDynamicIfPppData
74ipLocalLspPing
.1.3.6.1.4.1.4874.2.2.81.1.2.1.1.3
The minimum rate for this control protocol on this slot for this
dos-protection-group. This value is calculated based on the
priority rate and oversubscription as well as the control protocol
weight
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4874.2.2.81.1.2.1.1.4
The maximum rate for this protocol on this slot for this
dos-protection-group. This is equivalent to the configured
rate for the dos-protection-group
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4874.2.2.81.1.2.1.1.5
The minimum burst for this control protocol on this slot for this
dos-protection-group. This value is calculated based on the
priority burst and oversubscription as well as the control protocol
weight
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4874.2.2.81.1.2.1.1.6
The maximum burst for this protocol on this slot for this
dos-protection-group. This is equivalent to the configured
burst for the dos-protection-group
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4874.2.2.81.1.2.1.1.7