Juniper-BRIDGE-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
2
Rows
2
Columns
7
.1.3.6.1.4.1.4874.2.2.63.1.2 · 1 row entry · 5 columns
Uses the junose variant from /opt/observium/mibs/junose.
Command help
Walk juniBridgeIfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'Juniper-BRIDGE-MIB' -M '/opt/observium/mibs/junose:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'Juniper-BRIDGE-MIB::juniBridgeIfTable'
This table contains entries for Bridge interfaces present in the
system.
juniBridgeIfEntry row .1.3.6.1.4.1.4874.2.2.63.1.2.1
Each entry describes the characteristics of a Bridge interface.
Creating/deleting entries in this table causes corresponding entries for
be created/deleted in ifTable/ifXTable/juniIfTable.
Column Syntax OID
The ifIndex of the Bridge interface. When creating entries in this
table, suitable values for this object are determined by reading
juniBridgeIfNextIfIndex.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
.1.3.6.1.4.1.4874.2.2.63.1.2.1.1
Controls creation/deletion of entries in this table according to the
RowStatus textual convention, constrained to support the following
values only:
createAndGo
destroy

To create an entry in this …
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.4874.2.2.63.1.2.1.2
The ifIndex of an interface over which this Bridge interface to be
layered. A value of zero indicates no layering. An implementation may
choose to require that a nonzero value be configured at entry creation.
IF-MIBInterfaceIndexOrZeror/w
Type Constraints:
range: 0..2147483647
Description:
This textual convention is an extension of the
InterfaceIndex convention. The latter defines a greater
than zero value used to identify an interface or interface
sub-layer in the managed system. This extension permits…
.1.3.6.1.4.1.4874.2.2.63.1.2.1.3
The index of the associated subscriber policy.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4874.2.2.63.1.2.1.4
The maximum number of entries that can be learned on this interface.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4874.2.2.63.1.2.1.5
.1.3.6.1.4.1.4874.2.2.63.2.1 · 1 row entry · 2 columns
Uses the junose variant from /opt/observium/mibs/junose.
Command help
Walk juniBridgeAgeTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'Juniper-BRIDGE-MIB' -M '/opt/observium/mibs/junose:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'Juniper-BRIDGE-MIB::juniBridgeAgeTable'
A table that contains information about unicast entries for which the
bridge has aging information.
juniBridgeAgeEntry row .1.3.6.1.4.1.4874.2.2.63.2.1.1
Information about a specific unicast MAC address for which the bridge
has some forwarding and/or filtering information.
Column Syntax OID
A unicast MAC address for which the bridge has aging information.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.4874.2.2.63.2.1.1.1
The age of this entry in the forwarding table.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4874.2.2.63.2.1.1.2