Juniper-ACCOUNTING-MIB Table View

A list of accounting information selection entries.
          
Note that additions, modifications and deletions of entries in this
table can occur at any time, but such changes only take effect on the
next occasion when collection begins into a new interval.  Thus, between
modification and the next 'swap', the content of this table does not
reflect the current selection.

juniAcctngSelectionEntry row .1.3.6.1.4.1.4874.2.2.24.1.1.1.1

An entry used to extend the the selection entry in
acctngSelectionEntry. This conceptual row extension is used for
Juniper accounting extensions for connectionless data collection.

Indexes

No indexes recorded

Column	Syntax	OID
juniAcctngSelectionType Indicates the types of connections for which the information selected by this entry are to be collected. The ietfAccountControl(0) bit position indicates that the ACCOUNTING-CONTROL-MIB.acctngSelectionType in the base …	Bitsr/w Enumerated Values: 0 ietfAccountControl 1 connectionLessLayer2	.1.3.6.1.4.1.4874.2.2.24.1.1.1.1.1
juniAcctngSelectionMode Indicates the data collection mode.	Enumerationr/w Enumerated Values: 1 absoluteCounterValues 2 deltaCounterValues	.1.3.6.1.4.1.4874.2.2.24.1.1.1.1.2
juniAcctngSelectionSubtreeTypedeprecated Indicates the origin of the collection, given the row's subtree. The architecture implementation for statistics collection imposes that rows with distinct juniAcctngSelectionSubtreeType may not be collected into the sa…	Enumeration Enumerated Values: 0 unknown 1 lineCard 2 systemController	.1.3.6.1.4.1.4874.2.2.24.1.1.1.1.3
juniAcctngSelectionMaxIfStackLevels Indicates the maximum number of levels in the ifStack table to be returned when using the ifStack accounting schema. This object is ignored if acctngSelectionSubtree is not set to juniAcctngSelectionSchemaIfStack. Whe…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4874.2.2.24.1.1.1.1.4
juniAcctngSelectionPolicyName Specifies the name of the policy associated with the statistics collected when using the policy accounting schema. This object is ignored if acctngSelectionSubtree is not set to juniAcctngSelectionSchemaPolicy.	OctetStringr/w Constraints: range: 0-40	.1.3.6.1.4.1.4874.2.2.24.1.1.1.1.5
juniAcctngSelectionPolicyType Specifies the attachment point for the policy associated with the statistics collected when using the policy accounting schema. This object is ignored if acctngSelectionSubtree is not set to juniAcctngSelectionSchemaPo…	Juniper-POLICY-MIBJuniPolicyAttachmentTyper/w Type Values: 0 noPolicy 1 inputPolicy 2 outputPolicy 4 secondaryInputPolicy 7 auxiliaryInputPolicy	.1.3.6.1.4.1.4874.2.2.24.1.1.1.1.6
juniAcctngSelectionIfCreateDeleteStats Enable/disable interfaces create and delete statistics collection.	Juniper-TCJuniEnabler/w Type Values: 0 disable 1 enable	.1.3.6.1.4.1.4874.2.2.24.1.1.1.1.7
juniAcctngSelectionIfCreateDeleteStatsIfTypes The interface-types that are used in the configuration of the create/delete statistics collection. Allowed interface-types are IP, ATM1483, PPP and VLAN. These interface-types are allowed to configure if the inter…	Bitsr/w Enumerated Values: 0 ip 1 ppp 2 atm1483 3 vlan 4 mplsMajor 5 mplsL2Shim 6 mplsMinor	.1.3.6.1.4.1.4874.2.2.24.1.1.1.1.8

A list of ifIndexes to be used as starting point when using the ifStack
selection schema.
          
Note that additions, modifications and deletions of entries in this
table can occur at any time, but such changes only take effect on the
next occasion when collection begins into a new interval.  Thus, between
modification and the next 'swap', the content of this table does not
reflect the current selection.

juniAcctngSelectionIfStackStartEntry row .1.3.6.1.4.1.4874.2.2.24.1.1.3.1

An entry used to determine the starting point entry when using the
ifStack schema.

Indexes

ACCOUNTING-CONTROL-MIBacctngSelectionIndex juniAcctngSelectionIfStackIfIndex

Column	Syntax	OID
juniAcctngSelectionIfStackIfIndex The ifIndex to be used as a starting point in the interface stack configuration. The interfaces to be returned in the ifStack schema will start from this value, going up.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.4874.2.2.24.1.1.3.1.1
juniAcctngSelectionIfStackRowStatus Controls creation/deletion of entries in this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.4874.2.2.24.1.1.3.1.2

A unique value identifying the file transfer behavior and the the file
to where accounting data is to be stored.

juniAcctngFileEntry row .1.3.6.1.4.1.4874.2.2.24.1.2.1.1

An entry used to extend the file management of acctngFileEntry. This
conceptual row extension is used for Juniper accounting extensions to
automate the transfer of accounting data to remote hosts.

Indexes

No indexes recorded

Column	Syntax	OID
juniAcctngFileXferMode Indicates the mode to use for transfering accounting data to remote client. juniAcctngManualTransfer - Administrator is responsible for manually transfering collected accounting data off of the system. …	Enumerationr/w Enumerated Values: 1 juniAcctngManualTransfer 2 juniAcctngAutomatedTransfer 3 juniAcctngTransferOnFileFull 4 juniAcctngRedundantTransfer	.1.3.6.1.4.1.4874.2.2.24.1.2.1.1.1
juniAcctngFileXferIndex Identifies an entry in the juniFileXferTable, which defines the file transfer parameters to use when the agent is configured to automatically transfer collected accounting data files. A set to this object will fail if …	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.4874.2.2.24.1.2.1.1.2
juniAcctngFileXferSecondaryIndex Identifies a backup or secondary entry in the juniFileXferTable, which defines the file transfer parameters to use when the agent is configured to automatically transfer collected accounting data files. A set to this o…	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.4874.2.2.24.1.2.1.1.3

This table was obsoleted when the indexing changed.

juniAcctngObsInterfaceEntry row .1.3.6.1.4.1.4874.2.2.24.1.3.1.1

Obsolete table entry.

Indexes

Juniper-UNI-IF-MIBjuniIfType

Column	Syntax	OID
juniAcctngObsInterfaceAdminStatusobsolete Obsolete object.	Juniper-TCJuniAcctngAdminTyper/w Type Values: 0 disabled 1 enabled	.1.3.6.1.4.1.4874.2.2.24.1.3.1.1.1
juniAcctngObsInterfaceOperStatusobsolete Obsolete object.	Juniper-TCJuniAcctngOperType Type Values: 0 disable 1 enable 2 notSupported	.1.3.6.1.4.1.4874.2.2.24.1.3.1.1.2
juniAcctngObsInterfaceRowStatusobsolete Obsolete object.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.4874.2.2.24.1.3.1.1.3
juniAcctngObsInterfaceAccntgFileIndexobsolete Obsolete object.	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.4874.2.2.24.1.3.1.1.4

A table controlling the collection of accounting data on specific
interfaces types.  This table provides an efficient mechanism to enable
and/or disable data collection on all interfaces of a specified type.
This table replaces the obsolete version with the same name.

juniAcctngInterfaceEntry row .1.3.6.1.4.1.4874.2.2.24.1.3.2.1

An entry which controls whether accounting data is to be collected on
interfaces of a specific type, to a specific accounting file and by the
systems interface location.

Indexes

Juniper-UNI-IF-MIBjuniIfType juniAcctngInterfaceFileIndex juniAcctngInterfaceLocation

Column	Syntax	OID
juniAcctngInterfaceFileIndex This object selects the acctngFileTable entry for the collection statistics for this interface type. The value of this object is the same as the acctngFileIndex and is used to cross reference accounting data files in t…	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.4874.2.2.24.1.3.2.1.1
juniAcctngInterfaceLocation The interface location specification for this entry. If the value of this entry is a zero length string, then all system locations are included for the interface type defined by juniIfType.	Juniper-TCJuniInterfaceLocation Type Constraints: range: 0..8	.1.3.6.1.4.1.4874.2.2.24.1.3.2.1.2
juniAcctngInterfaceAdminStatus The desired administrative state for accounting data collection for interfaces defined by the type of this entry. The administrative scope is for all interfaces of the type defined by the corresponding juniIfType for t…	Juniper-TCJuniAcctngAdminTyper/w Type Values: 0 disabled 1 enabled	.1.3.6.1.4.1.4874.2.2.24.1.3.2.1.3
juniAcctngInterfaceOperStatus The operational state for accounting data collection on for all interfaces corresponding to this entries type.	Juniper-TCJuniAcctngOperType Type Values: 0 disable 1 enable 2 notSupported	.1.3.6.1.4.1.4874.2.2.24.1.3.2.1.4
juniAcctngInterfaceRowStatus Controls creation/deletion of entries in this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.4874.2.2.24.1.3.2.1.5

A table to display line cards interfaces final statistics transfer 
statistics.

juniAcctngIfFinalStatsXferStatsEntry row .1.3.6.1.4.1.4874.2.2.24.1.3.3.1

An entry is a display of one line card's interfaces final statistics
transfer statistics.

Indexes

juniAcctngIfFinalStatsXferStatsSlotNumber

Column	Syntax	OID
juniAcctngIfFinalStatsXferStatsSlotNumber This object selects the slot number to display interfaces final statistics transfer statistics for the line module on that slot.	Integer32 Constraints: range: 0-14	.1.3.6.1.4.1.4874.2.2.24.1.3.3.1.1
juniAcctngIfFinalStatsXferStatsReceived Count of the total received interfaces final statistics records for the line module.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4874.2.2.24.1.3.3.1.2
juniAcctngIfFinalStatsXferStatsTransferred Count of the total transferred interfaces final statistics records for the line module.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4874.2.2.24.1.3.3.1.3
juniAcctngIfFinalStatsXferStatsDropped Count of the total dropped interfaces final statistics records for the line module.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4874.2.2.24.1.3.3.1.4

This Table stores the configuration of  Virtual Routers per collector (File Index) basis. Multiple Virtual Routers can be 
configured per collector (file index)

juniAcctngVirtualRouterTableEntry row .1.3.6.1.4.1.4874.2.2.24.1.5.1.1

An entry used to determine the starting point entry when using the
ifStack schema.

Indexes

juniAcctngVirtualRouterTableIndex

Column	Syntax	OID
juniAcctngVirtualRouterTableIndex This Index to be used as a starting point in the Virtual Router Table configuration. The index to be returned in the Virtual Router Table will start from this value, going up.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4874.2.2.24.1.5.1.1.1
juniAcctngVirtualRouterTableVRName Virtual Router name(s) space separated.	OctetStringr/w Constraints: range: 0-255	.1.3.6.1.4.1.4874.2.2.24.1.5.1.1.2
juniAcctngVirtualRouterTableRowStatus Controls creation/deletion of entries in this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.4874.2.2.24.1.5.1.1.3