JUNIPER-VLAN-MIB Table View

A table of VLAN names and characteristics.

jnxVlanEntry row .1.3.6.1.4.1.2636.3.40.1.5.1.1.1

A table entry containing VLAN names and characteristics.

Indexes

jnxVlanName

Column	Syntax	OID
jnxVlanNameobsolete Vlan name is the textual name and this is the identifier that the user of a configuration utility will use.	OctetString Constraints: range: 1-255	.1.3.6.1.4.1.2636.3.40.1.5.1.1.1.1
jnxVlanIDobsolete This is the locally significant ID that is used internally by this device to reference this VLAN.	Integer32 Constraints: range: 1-4094	.1.3.6.1.4.1.2636.3.40.1.5.1.1.1.2
jnxVlanTypeobsolete The valn type can be static (1) Dynamic(2)	Enumeration Enumerated Values: 1 static 2 dynamic	.1.3.6.1.4.1.2636.3.40.1.5.1.1.1.3
jnxVlanPortGroupInstanceobsolete jnxVlanPortGroupInstance is the index that identifies that the sub tree in the jnxVlanPortGroupTable helps to retrieve the group of ports in this VLAN.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2636.3.40.1.5.1.1.1.4
jnxVlanMacListInstanceobsolete jnxVlanMacListInstance is the index , if this is a MAC-based VLAN which identifies the sub tree to retrieve the list of MAC address to allow into this VLAN. If this is not a MAC-based VLAN then the value is 0	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2636.3.40.1.5.1.1.1.5

A table of VLAN names and characteristics in layer 3.

jnxVlanInterfaceEntry row .1.3.6.1.4.1.2636.3.40.1.5.1.2.1

A table entry containing VLAN names and characteristics in layer 3.

Indexes

jnxVlanName

Column	Syntax	OID
jnxVlanInterfaceIpAddressobsolete This specifies the IPAddress of this interface.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.2636.3.40.1.5.1.2.1.1
jnxVlanInterfaceProtocolobsolete This specifies the protocol for ipv4.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.2636.3.40.1.5.1.2.1.2
jnxVlanInterfaceSubNetMaskobsolete This specifies the subnet mask address of the vlan .	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2636.3.40.1.5.1.2.1.3
jnxVlanInterfaceBroadcastAddressobsolete This specifies the broadcast address of the vlan.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2636.3.40.1.5.1.2.1.4
jnxVlanInterfaceDescriptionobsolete jnxvlanInterfaceDescription provides the description for the vlan.	OctetString Constraints: range: 1-255	.1.3.6.1.4.1.2636.3.40.1.5.1.2.1.5
jnxVlanInterfaceAdminStatusobsolete This takes care of administration status of the vlan	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2636.3.40.1.5.1.2.1.6
jnxVlanInterfaceOperStatusobsolete This specifies the operational status of the vlan	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2636.3.40.1.5.1.2.1.7
jnxVlanSnmpIfIndexobsolete This specifies the SNMP IF Index .	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2636.3.40.1.5.1.2.1.8

A table of port groupings.

jnxVlanPortGroupEntry row .1.3.6.1.4.1.2636.3.40.1.5.1.3.1

A table entry containing a port number

Indexes

jnxVlanPortGroupIndex jnxVlanPort

Column	Syntax	OID
jnxVlanPortGroupIndexobsolete Index used so that there can be many different port groups	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2636.3.40.1.5.1.3.1.1
jnxVlanPortobsolete The vlanPort specifies the port in the vlan.By adding a port here, that port will now be part of any VLAN(s) that this port group is associated with.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2636.3.40.1.5.1.3.1.2
jnxVlanPortStatusobsolete The status of this port relative to the VLAN that points at this port group.[1.autoactive , 2.allowed, 3.allowedActive 4.allowedNotAvail, 5.notAssociated] autoActive : Means that the port is part of t…	Enumeration Enumerated Values: 1 autoActive 2 allowed 3 allowedActive 4 allowedNotAvail 5 notAssociated	.1.3.6.1.4.1.2636.3.40.1.5.1.3.1.3

jnxVlanMacListTable is the table of MAC Lists.

jnxVlanMacListEntry row .1.3.6.1.4.1.2636.3.40.1.5.1.4.1

A table entry containing MAC Addresses

Indexes

jnxVlanMacListIndex

Column	Syntax	OID
jnxVlanMacListIndex jnxVlanMacListIndex can be used beacuse there can be many different MAC Lists	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2636.3.40.1.5.1.4.1.1
jnxVlanMacAddress jnxVlanMacAddress is the MAC Address that belongs to this group.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2636.3.40.1.5.1.4.1.2

A table of VLAN names and characteristics.

jnxExVlanEntry row .1.3.6.1.4.1.2636.3.40.1.5.1.5.1

A table entry containing VLAN names and characteristics.

Indexes

jnxExVlanID

Column	Syntax	OID
jnxExVlanID This is the locally significant ID that is used internally by this device to reference this VLAN.	Integer32 Constraints: range: 1-4094	.1.3.6.1.4.1.2636.3.40.1.5.1.5.1.1
jnxExVlanName Vlan name is the textual name.	OctetString Constraints: range: 1-255	.1.3.6.1.4.1.2636.3.40.1.5.1.5.1.2
jnxExVlanType The vlan type can be static (1) Dynamic(2)	Enumeration Enumerated Values: 1 static 2 dynamic	.1.3.6.1.4.1.2636.3.40.1.5.1.5.1.3
jnxExVlanPortGroupInstance jnxExVlanPortGroupInstance is the index that identifies that the sub tree in the jnxVlanPortGroupTable helps to retrieve the group of ports in this VLAN.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2636.3.40.1.5.1.5.1.4
jnxExVlanTag jnxExVlanTag gives the Vlan Tag details for each Vlan.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2636.3.40.1.5.1.5.1.5

A table of VLAN names and characteristics in layer 3.

jnxExVlanInterfaceEntry row .1.3.6.1.4.1.2636.3.40.1.5.1.6.1

A table entry containing VLAN names and characteristics in layer 3.

Indexes

jnxExVlanID

Column	Syntax	OID
jnxExVlanInterfaceProtocol This specifies the protocol for ipv4.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.2636.3.40.1.5.1.6.1.1
jnxExVlanInterfaceIpAddress This specifies the IPAddress of this interface.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.2636.3.40.1.5.1.6.1.2
jnxExVlanInterfacePrefixLength This specifies the length of subnet mask address of the vlan .	INET-ADDRESS-MIBInetAddressPrefixLength Type Constraints: range: 0..2040	.1.3.6.1.4.1.2636.3.40.1.5.1.6.1.3
jnxExVlanInterfaceBroadcastAddress This specifies the broadcast address of the vlan.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.2636.3.40.1.5.1.6.1.4
jnxExVlanInterfaceDescription jnxExvlanInterfaceDescription provides the description for the vlan.	OctetString Constraints: range: 1-255	.1.3.6.1.4.1.2636.3.40.1.5.1.6.1.5
jnxExVlanInterfaceAdminStatus This takes care of administration status of the vlan	Enumeration Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.2636.3.40.1.5.1.6.1.6
jnxExVlanInterfaceOperStatus This specifies the operational status of the vlan	Enumeration Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.2636.3.40.1.5.1.6.1.7
jnxExVlanSnmpIfIndex This specifies the SNMP IF Index .	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2636.3.40.1.5.1.6.1.8

A table of port groupings.

jnxExVlanPortGroupEntry row .1.3.6.1.4.1.2636.3.40.1.5.1.7.1

A table entry containing a port number

Indexes

jnxExVlanPortGroupIndex jnxExVlanPort

Column	Syntax	OID
jnxExVlanPortGroupIndex Index used so that there can be many different port groups	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.2636.3.40.1.5.1.7.1.1
jnxExVlanPort The vlanPort specifies the port in the vlan.By adding a port here, that port will now be part of any VLAN(s) that this port group is associated with.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.2636.3.40.1.5.1.7.1.2
jnxExVlanPortStatus The status of this port relative to the VLAN that points at this port group.[1.autoactive , 2.allowed, 3.allowedActive 4.allowedNotAvail, 5.notAssociated] autoActive : Means that the port is part of t…	Enumeration Enumerated Values: 1 autoActive 2 allowed 3 allowedActive 4 allowedNotAvail 5 notAssociated	.1.3.6.1.4.1.2636.3.40.1.5.1.7.1.3
jnxExVlanPortTagness The VlanPortTaqness gives whether the Port is tagged or untagged.	Enumeration Enumerated Values: 1 tagged 2 untagged	.1.3.6.1.4.1.2636.3.40.1.5.1.7.1.4
jnxExVlanPortAccessMode The VlanPortAccessMode gives whether the Port is Access or Trunk.	Enumeration Enumerated Values: 1 access 2 trunk	.1.3.6.1.4.1.2636.3.40.1.5.1.7.1.5