JUNIPER-TIMING-NOTFNS-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
6
Rows
6
Columns
66

jnxClksyncSynceQualityTable

table
.1.3.6.1.4.1.2636.3.75.1.3.30 · 1 row entry · 3 columns
Open in standard view
Uses the juniper variant from /opt/observium/mibs/juniper.
Command help
Walk jnxClksyncSynceQualityTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'JUNIPER-TIMING-NOTFNS-MIB' -M '/opt/observium/mibs/juniper:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'JUNIPER-TIMING-NOTFNS-MIB::jnxClksyncSynceQualityTable' 
Synce Table to get Quality metrics for all configured sources
jnxClksyncSynceQualityEntry row .1.3.6.1.4.1.2636.3.75.1.3.30.1
Synce Table to get Quality metrics for all configured sources
Indexes
Column Syntax OID
jnxClksyncSynceQualityTableIndex
The index for each configured source, not displayed for get/walk
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2636.3.75.1.3.30.1.1
jnxClksyncSynceQualityIntfName
The ifName of the configured source
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.2636.3.75.1.3.30.1.2
jnxClksyncSynceQualityValue
The Quality Level of the configured source
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.2636.3.75.1.3.30.1.3

jnxClksyncPtpOperationalMasterTable

table
.1.3.6.1.4.1.2636.3.75.1.3.36 · 1 row entry · 3 columns
Open in standard view
Uses the juniper variant from /opt/observium/mibs/juniper.
Command help
Walk jnxClksyncPtpOperationalMasterTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'JUNIPER-TIMING-NOTFNS-MIB' -M '/opt/observium/mibs/juniper:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'JUNIPER-TIMING-NOTFNS-MIB::jnxClksyncPtpOperationalMasterTable' 
PTP Operational Master Table displays the upstream clock details
jnxClksyncPtpOperationalMasterEntry row .1.3.6.1.4.1.2636.3.75.1.3.36.1
PTP Operational Master Entrydisplays the upstream clock details
Indexes
Column Syntax OID
jnxClksyncPtpOperationalMasterIndex
The index for each operational master, not displayed for get/walk
Integer32
Constraints:
range: 1-512
 .1.3.6.1.4.1.2636.3.75.1.3.36.1.1
jnxClksyncPtpOperationalMasterAttrIndex
The index for each attribute displayed for master, not displayed
index not displayed for get/walk
Integer32
Constraints:
range: 1-512
 .1.3.6.1.4.1.2636.3.75.1.3.36.1.2
jnxClksyncPtpOperationalMasters
Attributes displayed for each master i.e ifl, localip, no_of_rem_clks
and followed by remote ips
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.2636.3.75.1.3.36.1.3

jnxClksyncPtpOperationalSlaveTable

table
.1.3.6.1.4.1.2636.3.75.1.3.37 · 1 row entry · 3 columns
Open in standard view
Uses the juniper variant from /opt/observium/mibs/juniper.
Command help
Walk jnxClksyncPtpOperationalSlaveTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'JUNIPER-TIMING-NOTFNS-MIB' -M '/opt/observium/mibs/juniper:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'JUNIPER-TIMING-NOTFNS-MIB::jnxClksyncPtpOperationalSlaveTable' 
PTP Operational Slave Table displays the downstream clock details
jnxClksyncPtpOperationalSlaveEntry row .1.3.6.1.4.1.2636.3.75.1.3.37.1
PTP Operational Slave Entry displays the downstream clock details
Indexes
Column Syntax OID
jnxClksyncPtpOperationalSlaveIndex
The index for each operational slave, not displayed for get/walk
Integer32
Constraints:
range: 1-512
 .1.3.6.1.4.1.2636.3.75.1.3.37.1.1
jnxClksyncPtpOperationalSlaveAttrIndex
The index for each attribute displayed for master, not displayed
index not displayed for get/walk
Integer32
Constraints:
range: 1-512
 .1.3.6.1.4.1.2636.3.75.1.3.37.1.2
jnxClksyncPtpOperationalSlaves
Attributes displayed for each slave i.e ifl, localip, no_of_rem_clks
and followed by remote ips
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.2636.3.75.1.3.37.1.3

jnxPtpStatisticsTable

table
.1.3.6.1.4.1.2636.3.75.1.5.2 · 1 row entry · 15 columns
Open in standard view
Uses the juniper variant from /opt/observium/mibs/juniper.
Command help
Walk jnxPtpStatisticsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'JUNIPER-TIMING-NOTFNS-MIB' -M '/opt/observium/mibs/juniper:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'JUNIPER-TIMING-NOTFNS-MIB::jnxPtpStatisticsTable' 
Performance monitor statistics table as per
Annex J3 of IEEE 1588v2.1 (2019).
jnxPtpStatisticsTableEntry row .1.3.6.1.4.1.2636.3.75.1.5.2.1
Performance monitor statistics table entries.
Indexes
Column Syntax OID
jnxPtpStatisticsAttrIndex
The index for each performance monitor statistics data
attribute: (1..96) represents 15 min counters; (97..98)
represents 24 h counters.
Unsigned32
Constraints:
range: 1-98
 .1.3.6.1.4.1.2636.3.75.1.5.2.1.1
jnxPtpStatisticsTimestamp
Timestamp of PTP slave port monitor statistics data.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.2636.3.75.1.5.2.1.2
jnxPtpStatisticsTxAnnounce
Counter indicating the number of Announce messages that have been
transmitted for each 15 min and 24 h interval.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2636.3.75.1.5.2.1.3
jnxPtpStatisticsTxSync
Counter indicating the number of Sync messages that have been
transmitted for each 15 min and 24 h interval.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2636.3.75.1.5.2.1.4
jnxPtpStatisticsTxDelayRequest
Counter indicating the number of Delay Request messages that have been
transmitted for each 15 min and 24 h interval.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2636.3.75.1.5.2.1.5
jnxPtpStatisticsTxDelayResponse
Counter indicating the number of Delay Response messages that have been
transmitted for each 15 min and 24 h interval.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2636.3.75.1.5.2.1.6
jnxPtpStatisticsTxFollowup
Counter indicating the number of Follow Up messages that have been
transmitted for each 15 min and 24 h interval.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2636.3.75.1.5.2.1.7
jnxPtpStatisticsTxError
Counter indicating the number of Transmit Error messages that have been
transmitted for each 15 min and 24 h interval.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2636.3.75.1.5.2.1.8
jnxPtpStatisticsAnnouncedFromAllForeignMasters
Counter indicating the total number of announce messages from
the foreign Masters that have been received for each 15 min and
24 h interval as per Annex J3 of IEEE 1588v2.1 (2019).
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2636.3.75.1.5.2.1.9
jnxPtpStatisticsRxAnnounce
Counter indicating the number of Announce messages from the current
GM that have been received for each 15 min and 24 h interval.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2636.3.75.1.5.2.1.10
jnxPtpStatisticsRxSync
Counter indicating the number of Sync messages that have been
received for each 15 min and 24 h interval.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2636.3.75.1.5.2.1.11
jnxPtpStatisticsRxDelayRequest
Counter indicating the number of Delay Request messages that have been
received for each 15 min and 24 h interval.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2636.3.75.1.5.2.1.12
jnxPtpStatisticsRxDelayResponse
Counter indicating the number of Delay Response messages that have been
received for each 15 min and 24 h interval.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2636.3.75.1.5.2.1.13
jnxPtpStatisticsRxFollowup
Counter indicating the number of Follow Up messages that have been
received for each 15 min and 24 h interval.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2636.3.75.1.5.2.1.14
jnxPtpStatisticsRxError
Counter indicating the number of Receive Error messages that have been
received for each 15 min and 24 h interval.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2636.3.75.1.5.2.1.15

jnxPtpPerformanceTable

table
.1.3.6.1.4.1.2636.3.75.1.5.3 · 1 row entry · 23 columns
Open in standard view
Uses the juniper variant from /opt/observium/mibs/juniper.
Command help
Walk jnxPtpPerformanceTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'JUNIPER-TIMING-NOTFNS-MIB' -M '/opt/observium/mibs/juniper:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'JUNIPER-TIMING-NOTFNS-MIB::jnxPtpPerformanceTable' 
Performance monitor table as per
Annex J1 of IEEE 1588v2.1 (2019).
jnxPtpPerformanceEntry row .1.3.6.1.4.1.2636.3.75.1.5.3.1
PTP performance entry displays the performance monitor data details.
Indexes
Column Syntax OID
jnxPtpPerformanceAttrIndex
The index for each performance monitor attribute: (1..96)
represents 15 min counters; (97..98) represents 24 h counters.
Unsigned32
Constraints:
range: 1-98
 .1.3.6.1.4.1.2636.3.75.1.5.3.1.1
jnxPtpPerformanceIntfName
The interface name for ptp performance monitor data.
OctetString
Constraints:
range: 0-127
 .1.3.6.1.4.1.2636.3.75.1.5.3.1.2
jnxPtpPerformanceSourcePortIdentity
Idenity of the source port associated with the performance monitor data.
Unsigned32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2636.3.75.1.5.3.1.3
jnxPtpPerformanceTimestamp
Timestamp of PTP slave port monitor measurement data.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.2636.3.75.1.5.3.1.4
jnxPtpPerformancePeriodComplete
Flag to represent if any data collected within a measurement window
(15min or 24h) is partial as per IEEE 1588 2019 Annex J.4.1.
Enumeration
Enumerated Values:
0false
1true
 .1.3.6.1.4.1.2636.3.75.1.5.3.1.5
jnxPtpPerformanceDataValid
Validity of performance monitor data for each 15 min and 24 h interval.
Enumeration
Enumerated Values:
0false
1true
 .1.3.6.1.4.1.2636.3.75.1.5.3.1.6
jnxPtpPerformanceDataInvalidReason
PTP slave port monitor measurement data (15min/24h) invalid reasons:
1) PTP servo sync state not phase aligned & Phy sync state not in sync.
2) PTP servo sync state not phase aligned & Phy sync state in sync.
3) PTP ser…
OctetString
Constraints:
range: 0-127
 .1.3.6.1.4.1.2636.3.75.1.5.3.1.7
jnxPtpPerformanceAverageMasterSlaveDelay
Average of the Master to Slave Delay for each 15 min and 24 h interval.
JUNIPER-SMIInteger64
Type Constraints:
range: 4..11
 .1.3.6.1.4.1.2636.3.75.1.5.3.1.8
jnxPtpPerformanceMinMasterSlaveDelay
Minimum of the Master to Slave Delay for each 15 min and 24 h interval.
JUNIPER-SMIInteger64
Type Constraints:
range: 4..11
 .1.3.6.1.4.1.2636.3.75.1.5.3.1.9
jnxPtpPerformanceMaxMasterSlaveDelay
Maximum of the Master to Slave Delay for each 15 min and 24 h interval.
JUNIPER-SMIInteger64
Type Constraints:
range: 4..11
 .1.3.6.1.4.1.2636.3.75.1.5.3.1.10
jnxPtpPerformanceStdDevMasterSlaveDelay
Standard Deviation of the Master to Slave Delay for each 15 min
and 24 h interval.
JUNIPER-SMIInteger64
Type Constraints:
range: 4..11
 .1.3.6.1.4.1.2636.3.75.1.5.3.1.11
jnxPtpPerformanceAverageSlaveMasterDelay
Average of the Slave to Master Delay for each 15 min and 24 h interval.
JUNIPER-SMIInteger64
Type Constraints:
range: 4..11
 .1.3.6.1.4.1.2636.3.75.1.5.3.1.12
jnxPtpPerformanceMinSlaveMasterDelay
Minimum of the Slave to Master Delay for each 15 min and 24 h interval.
JUNIPER-SMIInteger64
Type Constraints:
range: 4..11
 .1.3.6.1.4.1.2636.3.75.1.5.3.1.13
jnxPtpPerformanceMaxSlaveMasterDelay
Maximum of the Slave to Master Delay for each 15 min and 24 h interval.
JUNIPER-SMIInteger64
Type Constraints:
range: 4..11
 .1.3.6.1.4.1.2636.3.75.1.5.3.1.14
jnxPtpPerformanceStdDevSlaveMasterDelay
Standard Deviation of the Slave to Master Delay for each 15 min
and 24 h interval.
JUNIPER-SMIInteger64
Type Constraints:
range: 4..11
 .1.3.6.1.4.1.2636.3.75.1.5.3.1.15
jnxPtpPerformanceAverageMeanPathDelay
Average of the Mean Path Delay for each 15 min and 24 h interval.
JUNIPER-SMIInteger64
Type Constraints:
range: 4..11
 .1.3.6.1.4.1.2636.3.75.1.5.3.1.16
jnxPtpPerformanceMinMeanPathDelay
Minimum of the Mean Path Delay for each 15 min and 24 h interval.
JUNIPER-SMIInteger64
Type Constraints:
range: 4..11
 .1.3.6.1.4.1.2636.3.75.1.5.3.1.17
jnxPtpPerformanceMaxMeanPathDelay
Maximum of the Mean Path Delay for each 15 min and 24 h interval.
JUNIPER-SMIInteger64
Type Constraints:
range: 4..11
 .1.3.6.1.4.1.2636.3.75.1.5.3.1.18
jnxPtpPerformanceStdDevMeanPathDelay
Standard Deviation of the Mean Path Delay for each 15 min
and 24 h interval.
JUNIPER-SMIInteger64
Type Constraints:
range: 4..11
 .1.3.6.1.4.1.2636.3.75.1.5.3.1.19
jnxPtpPerformanceAverageOffsetFromMaster
Average of the Phase Offset From Master for each 15 min and 24 h interval.
JUNIPER-SMIInteger64
Type Constraints:
range: 4..11
 .1.3.6.1.4.1.2636.3.75.1.5.3.1.20
jnxPtpPerformanceMinOffsetFromMaster
Minimum of the Phase Offset From Master for each 15 min and 24 h interval.
JUNIPER-SMIInteger64
Type Constraints:
range: 4..11
 .1.3.6.1.4.1.2636.3.75.1.5.3.1.21
jnxPtpPerformanceMaxOffsetFromMaster
Maximum of the Phase Offset From Master for each 15 min and 24 h interval.
JUNIPER-SMIInteger64
Type Constraints:
range: 4..11
 .1.3.6.1.4.1.2636.3.75.1.5.3.1.22
jnxPtpPerformanceStdDevOffsetFromMaster
Stdandard Deviation of the Phase Offset From Master for each 15 min
and 24 h interval.
JUNIPER-SMIInteger64
Type Constraints:
range: 4..11
 .1.3.6.1.4.1.2636.3.75.1.5.3.1.23

jnxPtpPassivePortMonitorTable

table
.1.3.6.1.4.1.2636.3.75.1.6.3 · 1 row entry · 19 columns
Open in standard view
Uses the juniper variant from /opt/observium/mibs/juniper.
Command help
Walk jnxPtpPassivePortMonitorTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'JUNIPER-TIMING-NOTFNS-MIB' -M '/opt/observium/mibs/juniper:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'JUNIPER-TIMING-NOTFNS-MIB::jnxPtpPassivePortMonitorTable' 
PTP passive port performance monitor table to get the passive
port performance against the selected slave port.
jnxPtpPassivePortMonitorEntry row .1.3.6.1.4.1.2636.3.75.1.6.3.1
PTP passive port performance monitor entry table to get the
passive port performance against the selected slave port.
Indexes
Column Syntax OID
jnxPtpPassivePortMonitorIntfName
The interface name for PTP passive port data displayed for the stream.
OctetString
Constraints:
range: 0-128
 .1.3.6.1.4.1.2636.3.75.1.6.3.1.1
jnxPtpPassivePortMonitorSourcePortIdentity
Identity of the source port to which PTP passive port data is associated.
OctetString
Constraints:
range: 0-127
 .1.3.6.1.4.1.2636.3.75.1.6.3.1.2
jnxPtpPassivePortMonitorDataValid
This describes the validity of the data. If port state is passive and, passive
port monitoring feature is enabled, then there is a valid measurement data
available set to (0). If port state is other than passive, then n…
Enumeration
Enumerated Values:
0valid
1inactive
2not-applicable
 .1.3.6.1.4.1.2636.3.75.1.6.3.1.3
jnxPtpPassivePortMonitorStartTimestamp
Start Timestamp of PTP passive port monitor performance data.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.2636.3.75.1.6.3.1.4
jnxPtpPassivePortMonitorEndTimestamp
End Timestamp of PTP passive port monitor performance data.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.2636.3.75.1.6.3.1.5
jnxPtpPassivePortMonitorAveragePhaseOffsetFromMaster
Average Phase Offset value of the passive port from Master.
JUNIPER-SMIInteger64
Type Constraints:
range: 4..11
 .1.3.6.1.4.1.2636.3.75.1.6.3.1.6
jnxPtpPassivePortMonitorMinPhaseOffsetFromMaster
Minimum Phase Offset value of the passive port from Master.
JUNIPER-SMIInteger64
Type Constraints:
range: 4..11
 .1.3.6.1.4.1.2636.3.75.1.6.3.1.7
jnxPtpPassivePortMonitorMaxPhaseOffsetFromMaster
Maximum Phase Offset value of the passive port from Master.
JUNIPER-SMIInteger64
Type Constraints:
range: 4..11
 .1.3.6.1.4.1.2636.3.75.1.6.3.1.8
jnxPtpPassivePortMonitorAverageMasterSlaveDelay
Average Master to Slave Delay value of the passive port from Master.
JUNIPER-SMIInteger64
Type Constraints:
range: 4..11
 .1.3.6.1.4.1.2636.3.75.1.6.3.1.9
jnxPtpPassivePortMonitorMinMasterSlaveDelay
Minimum Master to Slave Delay value of the passive port from Master.
JUNIPER-SMIInteger64
Type Constraints:
range: 4..11
 .1.3.6.1.4.1.2636.3.75.1.6.3.1.10
jnxPtpPassivePortMonitorMaxMasterSlaveDelay
Maximum Master to Slave Delay value of the passive port from Master.
JUNIPER-SMIInteger64
Type Constraints:
range: 4..11
 .1.3.6.1.4.1.2636.3.75.1.6.3.1.11
jnxPtpPassivePortMonitorAverageSlaveMasterDelay
Average Slave to Master Delay value of the passive port from Master.
JUNIPER-SMIInteger64
Type Constraints:
range: 4..11
 .1.3.6.1.4.1.2636.3.75.1.6.3.1.12
jnxPtpPassivePortMonitorMinSlaveMasterDelay
Minimum Slave to Master Delay value of the passive port from Master.
JUNIPER-SMIInteger64
Type Constraints:
range: 4..11
 .1.3.6.1.4.1.2636.3.75.1.6.3.1.13
jnxPtpPassivePortMonitorMaxSlaveMasterDelay
Maximum Slave to Master Delay value of the passive port from Master.
JUNIPER-SMIInteger64
Type Constraints:
range: 4..11
 .1.3.6.1.4.1.2636.3.75.1.6.3.1.14
jnxPtpPassivePortMonitorAveragePathDelay
Average Mean Path Delay of the passive port from Master.
JUNIPER-SMIInteger64
Type Constraints:
range: 4..11
 .1.3.6.1.4.1.2636.3.75.1.6.3.1.15
jnxPtpPassivePortMonitorMaxPhaseOffsetThreshold
The configured Phase Offset threshold acceptable between
the passive port and slave port.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2636.3.75.1.6.3.1.16
jnxPtpPassivePortMonitorPhaseOffsetThresholdExceeded
Reflects the status as whether the passive port exceeded the
configured Max offset threshold or not.
Enumeration
Enumerated Values:
0false
1true
 .1.3.6.1.4.1.2636.3.75.1.6.3.1.17
jnxPtpPassivePortMonitorPortConfig
Represents the current state of the configured passive port.
Enumeration
Enumerated Values:
0stateful
1stateful-slave-only
2stateful-master-only
3stateful-not-master
4stateful-measure-only
5stateful-not-master-and-measure-only
 .1.3.6.1.4.1.2636.3.75.1.6.3.1.18
jnxPtpPassivePortMonitorPortState
Represents the current state of the port.
Enumeration
Enumerated Values:
0initializing
1faulty
2disabled
3listening
4pre-master
5master
6passive
7uncalibrated
8slave
9unknown
 .1.3.6.1.4.1.2636.3.75.1.6.3.1.19