JUNIPER-SIP-COMMON-MIB Table View

This table contains the common configuration objects applicable
to all SIP entities.

jnxSipCommonCfgEntry row .1.3.6.1.4.1.2636.3.39.1.15.2.1.1.1.1

A row of common configuration.

Each row represents objects for a particular SIP entity
instance present in this system.

Indexes

jnxSipCfgApplName

Column	Syntax	OID
jnxSipCfgApplName The name of the network application which uniquely identifies the application to which this entry is applicable.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2636.3.39.1.15.2.1.1.1.1.1
jnxSipCommonCfgProtocolVersion This object will reflect the version of SIP supported by this SIP entity. It will follow the same format as SIP version information contained in the SIP messages generated by this SIP entity. For example, entities sup…	SNMP-FRAMEWORK-MIBSnmpAdminString Type Constraints: range: 0..255	.1.3.6.1.4.1.2636.3.39.1.15.2.1.1.1.1.2
jnxSipCommonCfgServiceOperStatus This object contains the current operational state of the SIP application. unknown : The operational status cannot be determined for some reason. up : The application is operating…	Enumeration Enumerated Values: 1 unknown 2 up 3 down	.1.3.6.1.4.1.2636.3.39.1.15.2.1.1.1.1.3
jnxSipCommonCfgServiceStartTime The value of sysUpTime at the time the SIP entity was last started. If started prior to the last re-initialization of the local network management subsystem, then this object contains a zero value.	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2636.3.39.1.15.2.1.1.1.1.4
jnxSipCommonCfgServiceLastChange The value of sysUpTime at the time the SIP entity entered its current operational state. If the current state was entered prior to the last re-initialization of the local network management subsystem, then this object …	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2636.3.39.1.15.2.1.1.1.1.5
jnxSipCommonCfgOrganization This object contains the organization name which the SIP entity inserts into Organization headers of SIP messages processed by this system. If the string is empty, no Organization header is to be generated.	SNMP-FRAMEWORK-MIBSnmpAdminString Type Constraints: range: 0..255	.1.3.6.1.4.1.2636.3.39.1.15.2.1.1.1.1.6
jnxSipCommonCfgMaxTransactions This object indicates the maximum number of simultaneous transactions per second that the SIP entity can manage. In general, the value of this object SHOULD reflect a level of transaction processing per second that is …	Unsigned32 Constraints: range: 1-4294967295	.1.3.6.1.4.1.2636.3.39.1.15.2.1.1.1.1.7
jnxSipCommonCfgEntityType This object identifies the list of SIP entities this row is related to. It is defined as a bit map. Each bit represents a type of SIP entity. If a bit has value 1, the SIP entity represented by this row plays the role…	Bits Enumerated Values: 0 other 1 userAgent 2 proxyServer 3 redirectServer 4 registrarServer	.1.3.6.1.4.1.2636.3.39.1.15.2.1.1.1.1.8

This table contains the list of ports that each SIP entity in
this system is allowed to use.  These ports can be advertised
using the Contact header in a REGISTER request or response.

jnxSipCommonPortEntry row .1.3.6.1.4.1.2636.3.39.1.15.2.1.1.2.1

Specification of a particular port.
Each row represents those objects for a particular SIP entity
present in this system.

Indexes

jnxSipPortApplName jnxSipCommonPort

Column	Syntax	OID
jnxSipPortApplName The name of the network application which uniquely identifies the application to which this entry is applicable.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2636.3.39.1.15.2.1.1.2.1.1
jnxSipCommonPort This object reflects a particular port that can be used by the SIP application.	Unsigned32 Constraints: range: 1-65535	.1.3.6.1.4.1.2636.3.39.1.15.2.1.1.2.1.2
jnxSipCommonPortTransportRcv This object will specify the transport protocol the SIP entity will use to receive SIP messages. This object is a bit map. Each bit represents a transport protocol. If a bit has value 1, then that transport protocol i…	Bits Enumerated Values: 0 other 1 udp 2 tcp 3 sctp 4 tlsTcp 5 tlsSctp	.1.3.6.1.4.1.2636.3.39.1.15.2.1.1.2.1.3

This table contains a list of the SIP option tags (SIP
extensions) that either required, supported, or unsupported by
the SIP entity.  These option tags are used in the Require,
Proxy-Require, Supported and Unsupported header fields.
          
Example: if a user agent client supports and requires the
server to support reliability of provisional responses (IETF
RFC 3262), this table contains a row with the option tag string
'100rel' in jnxSipCommonOptionTag and the OCTET STRING value of
'1010 0000' or '0xA0' in jnxSipCommonOptionTagHeaderField.
          
If a server does not support the required feature (indicated in
a Require header to a UAS, or in a Proxy-Require to a Proxy
Server), the server returns a 420 Bad Extension listing the
feature in an Unsupported header.
          
Normally the list of such features supported by an entity is
static (i.e. will not change over time).

jnxSipCommonOptionTagEntry row .1.3.6.1.4.1.2636.3.39.1.15.2.1.1.3.1

A particular SIP option tag (extension) supported or
unsupported by the SIP entity, and which may be supported or
required by a peer.
Each row represents those objects for a particular SIP entity
present in this system.

Indexes

jnxSipOptionTagApplName jnxSipCommonOptionTagIndex

Column	Syntax	OID
jnxSipOptionTagApplName The name of the network application which uniquely identifies the application to which this entry is applicable.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2636.3.39.1.15.2.1.1.3.1.1
jnxSipCommonOptionTagIndex This object uniquely identifies a conceptual row in the table.	Unsigned32 Constraints: range: 1-4294967295	.1.3.6.1.4.1.2636.3.39.1.15.2.1.1.3.1.2
jnxSipCommonOptionTag This object indicates the SIP option tag. The option tag names are registered with IANA and available at http://www.iana.org/.	SNMP-FRAMEWORK-MIBSnmpAdminString Type Constraints: range: 0..255	.1.3.6.1.4.1.2636.3.39.1.15.2.1.1.3.1.3
jnxSipCommonOptionTagHeaderField This object indicates whether the SIP option tag is supported (Supported header), unsupported (Unsupported header), required (Require or Proxy-Require header) by the SIP entity. A SIP option tag may be both supported a…	Bits Enumerated Values: 0 require 1 proxyRequire 2 supported 3 unsupported	.1.3.6.1.4.1.2636.3.39.1.15.2.1.1.3.1.4

This table contains a list of methods supported by each SIP
entity in this system (see the standard set of SIP methods in
Section 7.1 of RFC 3261).  Any additional methods that may be
incorporated into the SIP protocol can be represented by this
table without any requirement to update this MIB module.
          
The table is informational in nature; conveying to the NMS
capabilities of the managed system.

jnxSipCommonMethodSupportedEntry row .1.3.6.1.4.1.2636.3.39.1.15.2.1.1.4.1

A particular method supported by the SIP entity.
Each row represents those objects for a particular SIP entity
present in this system.

Indexes

jnxSipMethodSupportedApplName jnxSipCommonMethodSupportedIndex

Column	Syntax	OID
jnxSipMethodSupportedApplName The name of the network application which uniquely identifies the application to which this entry is applicable.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2636.3.39.1.15.2.1.1.4.1.1
jnxSipCommonMethodSupportedIndex This object uniquely identifies a conceptual row in the table for a specific SIP method.	Unsigned32 Constraints: range: 1-4294967295	.1.3.6.1.4.1.2636.3.39.1.15.2.1.1.4.1.2
jnxSipCommonMethodSupportedName This object reflects the supported method's name. The method name MUST be all upper case (e.g, 'INVITE').	OctetString Constraints: range: 1-100	.1.3.6.1.4.1.2636.3.39.1.15.2.1.1.4.1.3

This table contains timer configuration objects applicable to
SIP user agent and SIP stateful Proxy Server entities.

jnxSipCommonCfgTimerEntry row .1.3.6.1.4.1.2636.3.39.1.15.2.1.1.5.1

A row of timer configuration.

Each row represents those objects for a particular SIP entity
present in this system.

Indexes

jnxSipCfgTimerApplName

Column	Syntax	OID
jnxSipCfgTimerApplName The name of the network application which uniquely identifies the application to which this entry is applicable.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2636.3.39.1.15.2.1.1.5.1.1
jnxSipCommonCfgTimerA This object reflects the initial value for the retransmit timer for the INVITE method. The retransmit timer doubles after each retransmission, ensuring an exponential backoff in network traffic. This object represents…	millisecondsUnsigned32 Constraints: range: 100-1000	.1.3.6.1.4.1.2636.3.39.1.15.2.1.1.5.1.2
jnxSipCommonCfgTimerB This object reflects the maximum time a SIP entity will wait to receive a final response to an INVITE. The timer is started upon transmission of the initial INVITE request.	millisecondsUnsigned32 Constraints: range: 32000-300000	.1.3.6.1.4.1.2636.3.39.1.15.2.1.1.5.1.3
jnxSipCommonCfgTimerC This object reflects the maximum time a SIP Proxy Server will wait to receive a provisional response to an INVITE. The Timer C MUST be set for each client transaction when an INVITE request is proxied.	millisecondsUnsigned32 Constraints: range: 180000-300000	.1.3.6.1.4.1.2636.3.39.1.15.2.1.1.5.1.4
jnxSipCommonCfgTimerD This object reflects the amount of time that the server transaction can remain in the 'Completed' state when unreliable transports are used. The default value MUST be equal to or greater than 32000 for UDP transport, a…	millisecondsUnsigned32 Constraints: range: 0-300000	.1.3.6.1.4.1.2636.3.39.1.15.2.1.1.5.1.5
jnxSipCommonCfgTimerE This object reflects the initial value for the retransmit timer for a non-INVITE method while in 'Trying' state. The retransmit timer doubles after each retransmission until it reaches T2 to ensure an exponential backo…	millisecondsUnsigned32 Constraints: range: 100-1000	.1.3.6.1.4.1.2636.3.39.1.15.2.1.1.5.1.6
jnxSipCommonCfgTimerF This object reflects the maximum time a SIP entity will wait to receive a final response to a non-INVITE request. The timer is started upon transmission of the initial request.	millisecondsUnsigned32 Constraints: range: 32000-300000	.1.3.6.1.4.1.2636.3.39.1.15.2.1.1.5.1.7
jnxSipCommonCfgTimerG This object reflects the initial value for the retransmit timer for final responses to INVITE requests. If timer G fires, the response is passed to the transport layer again for retransmission, and timer G is set to fi…	millisecondsUnsigned32 Constraints: range: 0-1000	.1.3.6.1.4.1.2636.3.39.1.15.2.1.1.5.1.8
jnxSipCommonCfgTimerH This object reflects the maximum time a server will wait to receive an ACK before it abandons retransmitting the response. The timer is started upon entering the 'Completed' state.	millisecondsUnsigned32 Constraints: range: 32000-300000	.1.3.6.1.4.1.2636.3.39.1.15.2.1.1.5.1.9
jnxSipCommonCfgTimerI This object reflects the maximum time a SIP entity will wait to receive additional ACK message retransmissions. The timer is started upon entering the 'Confirmed' state. The default value MUST be T4 for UDP transport a…	millisecondsUnsigned32 Constraints: range: 0-10000	.1.3.6.1.4.1.2636.3.39.1.15.2.1.1.5.1.10
jnxSipCommonCfgTimerJ This object reflects the maximum time a SIP server will wait to receive retransmissions of non-INVITE requests. The timer is started upon entering the 'Completed' state for non-INVITE transactions. When timer J fires,…	millisecondsUnsigned32 Constraints: range: 32000-300000	.1.3.6.1.4.1.2636.3.39.1.15.2.1.1.5.1.11
jnxSipCommonCfgTimerK This object reflects the maximum time a SIP client will wait to receive retransmissions of responses to non-INVITE requests. The timer is started upon entering the 'Completed' state for non-INVITE transactions. When ti…	millisecondsUnsigned32 Constraints: range: 0-10000	.1.3.6.1.4.1.2636.3.39.1.15.2.1.1.5.1.12
jnxSipCommonCfgTimerT1 This object reflects the T1 timer for a SIP entity. T1 is an estimate of the round-trip time (RTT) between the client and server transactions.	millisecondsUnsigned32 Constraints: range: 200-10000	.1.3.6.1.4.1.2636.3.39.1.15.2.1.1.5.1.13
jnxSipCommonCfgTimerT2 This object reflects the T2 timer for a SIP entity. T2 is the maximum retransmit interval for non-INVITE requests and INVITE responses. It's used in various parts of the protocol to reset other Timer* objects to this …	millisecondsUnsigned32 Constraints: range: 200-10000	.1.3.6.1.4.1.2636.3.39.1.15.2.1.1.5.1.14
jnxSipCommonCfgTimerT4 This object reflects the T4 timer for a SIP entity. T4 is the maximum duration a message will remain in the network. It represents the amount of time the network will take to clear messages between client and server t…	millisecondsUnsigned32 Constraints: range: 200-10000	.1.3.6.1.4.1.2636.3.39.1.15.2.1.1.5.1.15