JUNIPER-SECURE-ACCESS-PORT-MIB Table View

A table provides the mechanism to control DHCP Snooping
and Dynamic ARP Inspection per VLAN. When a VLAN is created 
	in a device supporting this table, a corresponding entry will 
	be added to this table.

jnxSecAccessPortVlanEntry row .1.3.6.1.4.1.2636.3.40.1.2.1.1.1.1

A row instance contains whether DHCP Snooping and Dynamic
ARP Inspection at each existing VLAN is enabled or disabled.

Indexes

jnxSecAccessVlanName

Column	Syntax	OID
jnxSecAccessVlanName This object indicates the VLAN name on which Dhcp Snooping feature and Dynamic ARP Inspection is enabled.	OctetString Constraints: range: 0-255	.1.3.6.1.4.1.2636.3.40.1.2.1.1.1.1.1
jnxSecAccessVlanDhcpSnoopStatus This object indicates whether Dhcp Snooping is enabled in this VLAN. If this object is 'true', Dhcp Snooping is enabled in the specified VLAN. If this object is 'false', Dhcp Snooping is …	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2636.3.40.1.2.1.1.1.1.2
jnxSecAccessVlanDAIStatus This object indicates whether Dynamic ARP Inspection is enabled in this VLAN. If this object is 'true', Dynamic ARP Inspection is enabled. If this object is 'false', Dynamic ARP Inspection…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2636.3.40.1.2.1.1.1.1.3

The table contains the trust state and rate limit of each interface
for DHCP Snooping purpose. The table also contains information on MAC 
address limit feature for each interface capable of this feature.
This table also specifies whether IP source guard and MAC source 
guard are enabled on each interface.

jnxSecAccessPortIfEntry row .1.3.6.1.4.1.2636.3.40.1.2.1.1.2.1

A table entry contains the trust state and rate limit of an
interface, MAC address limit for that Interface. It also contains
the action to be undertaken if MAC address limit is exceeded. A table
entry specifies whethe…

Indexes

IF-MIBifIndex

Column	Syntax	OID
jnxSecAccessdsIfTrustState This object indicates whether the interface is trusted for DHCP Snooping purpose. If this object is 'true', the interface is trusted. DHCP packets coming to this interface will be forwarded without che…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2636.3.40.1.2.1.1.2.1.1
jnxSecAccessdsIfRateLimit This object indicates rate limit value for DHCP Snooping purpose. If the value of this object is 0, no rate limit is applied for DHCP traffic at this interface.	packets per secondSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2636.3.40.1.2.1.1.2.1.2
jnxSecAccessIfMacLimit This object specifies the threshold limit for the number of MAC address entries on this interface. When the instance value of this object is set to 0, no threshold limit will be applied for this interf…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2636.3.40.1.2.1.1.2.1.3
jnxSecAccessIfMacLimitExceed This object specifies the action to be taken by the system for this interface while the number of MAC addresses has exceeded the value of jnxIfMacLimit. This object value is only effective when the corr…	JnxMacLimitExceededAction Type Values: 1 none 2 drop 3 alarm 4 shutdown	.1.3.6.1.4.1.2636.3.40.1.2.1.1.2.1.4
jnxSecAccessIfIpSrcGuardStatus This object indicates whether IP Source Guard is enabled on the specified interface. If this object is 'true', then IP Source Guard is enabled on the specified interface. If this object is …	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2636.3.40.1.2.1.1.2.1.5
jnxSecAccessIfMacSrcGuardStatus This object indicates whether Mac Source Guard is enabled on the specified interface. If this object is 'true', then Mac Source Guard is enabled on the specified interface. If this object…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2636.3.40.1.2.1.1.2.1.6

Storm control monitors each type of traffic level on an interface. 
If traffic level exceeds the threshold value(rising threshold),
switch will drop all packets of that type until traffic level drops 
to the threshold level (falling threshold). If traffic rate for a 
particular type exceeds the rising threshold, action will be taken 
to shutdown or add configured filter on the port.
          
This table describes the traffic type for each interface, the rising 
threshold, falling threshold and the action to be taken if the traffic
exceeds the rising threshold.

jnxStormCtlEntry row .1.3.6.1.4.1.2636.3.40.1.2.1.1.3.1

An entry contains the interface index,traffic type for the interface,
the rising threshold, falling threshold and the action to be taken
if the traffic exceeds the rising threshold.

Indexes

IF-MIBifIndex jnxStormCtlIfTrafficType

Column	Syntax	OID
jnxStormCtlIfTrafficType This object specifies the traffic type on the particular interface. Value 1 specifies that it is broadcast traffic, value 2 specifies that it is multicast traffic and value 3 specifies that it is unicast traffic.	Enumeration Enumerated Values: 1 broadcast 2 multicast 3 unicast	.1.3.6.1.4.1.2636.3.40.1.2.1.1.3.1.1
jnxStormCtlRisingThreshold This object specifies the rising threshold value in packets per second. The storm control action is occurs when the traffic exceeds this threshold value.	packets per secondSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2636.3.40.1.2.1.1.3.1.2
jnxStormCtlFallingThreshold This object specifies the falling threshold value in packets per second. The storm control action ceases when the traffic drops to this threshold value.	packets per secondSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2636.3.40.1.2.1.1.3.1.3
jnxStormCtlAction This object specifies the action to be taken, when traffic exceeds rising threshold value. Value 1 specifies that the action taken is to shutdown the port. Value 2 specifies that the action taken is to apply a policy…	Enumeration Enumerated Values: 1 shutdown 2 filter	.1.3.6.1.4.1.2636.3.40.1.2.1.1.3.1.4