JUNIPER-NAT-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

jnxSrcNatStatsTable

table

.1.3.6.1.4.1.2636.3.59.1.1.1 · 1 row entry · 9 columns

Open in standard view

Uses the juniper variant from /opt/observium/mibs/juniper.

Command help

Walk jnxSrcNatStatsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'JUNIPER-NAT-MIB' -M '/opt/observium/mibs/juniper:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'JUNIPER-NAT-MIB::jnxSrcNatStatsTable'

This table exposes the source NAT translation
attributes of the translated addresses.
          
When performing source IP address translation, the services pic
translates the original source IP address and/or port
number to different one.  The resource, address source pools
provide the service pic with a supply of addresses from
which to draw when performing source network address translation.
          
This table contains information on source IP address
translation only.

jnxSrcNatStatsEntry row .1.3.6.1.4.1.2636.3.59.1.1.1.1

Source NAT address entries. It is indexed by the address
pool table and the address allocated.

Indexes

jnxNatSrcPoolName

Column Syntax OID

jnxNatSrcPoolName

The name of dynamic source IP address pool.

This is the address pool where the translated
address is allocated from.

OctetString

Constraints:
range: 0-64

.1.3.6.1.4.1.2636.3.59.1.1.1.1.1

jnxNatSrcXlatedAddrType

The type of dynamic source IP address allocated from
the address pool used in the NAT translation.
For NAT MIB, supporting ipv4(1) and ipv6(2) only.

Enumeration

Enumerated Values:

1	ipv4
2	ipv6

.1.3.6.1.4.1.2636.3.59.1.1.1.1.2

jnxNatSrcPoolType

Source NAT can do address translation with or without port
translation. The source port pool type indicates
whether the address translation is done with port or without
the port, or if it is a static translation.

Enumeration

Enumerated Values:

1	static
2	dynamic-napt
3	dynamic-nat
11	basic-nat44
12	dynamic-nat44
13	napt-44
14	dnat-44
15	stateful-nat64
16	stateless-nat64
17	basic-nat-pt
18	napt-pt
19	basic-nat66
20	stateless-nat66
21	napt-66
22	twice-napt-44
23	twice-basic-nat-44
24	twice-dynamic-nat-44
25	det-napt44
26	sd-napt44

.1.3.6.1.4.1.2636.3.59.1.1.1.1.3

jnxNatSrcNumPortAvail

The maxmimum number of ports available with this pool.

This attribute is only applicable to NAT translations with PAT.

SNMPv2-SMIUnsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2636.3.59.1.1.1.1.4

jnxNatSrcNumPortInuse

The number of ports in use for this NAT address entry.
This attribute is only applicable to translation with
port translation.

SNMPv2-SMIUnsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2636.3.59.1.1.1.1.5

jnxNatSrcNumAddressAvail

The maximum number of addresses available in this pool.

SNMPv2-SMIUnsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2636.3.59.1.1.1.1.6

jnxNatSrcNumAddressInUse

The number of addresses in use from this pool.
This attribute is only applicable to NAT translations without PAT.

SNMPv2-SMIUnsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2636.3.59.1.1.1.1.7

jnxNatSrcNumSessions

The number of sessions are in use based on this NAT address
entry.

SNMPv2-SMIUnsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2636.3.59.1.1.1.1.8

jnxNatSrcNumAddressMapped

The number of public addresses mapped
This attribute is only applicable for NAT translations with PAT.

SNMPv2-SMIUnsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2636.3.59.1.1.1.1.9

jnxNatRuleTable

table

.1.3.6.1.4.1.2636.3.59.1.1.2 · 1 row entry · 3 columns

Open in standard view

Uses the juniper variant from /opt/observium/mibs/juniper.

Command help

Walk jnxNatRuleTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'JUNIPER-NAT-MIB' -M '/opt/observium/mibs/juniper:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'JUNIPER-NAT-MIB::jnxNatRuleTable'

This table monitors NAT rule hits

jnxNatRuleEntry row .1.3.6.1.4.1.2636.3.59.1.1.2.1

NAT rule hit entries. It is indexed by the rule index

Indexes

jnxNatRuleName

Column Syntax OID

jnxNatRuleName

NAT rule name

OctetString

Constraints:
range: 0-128

.1.3.6.1.4.1.2636.3.59.1.1.2.1.1

jnxNatRuleType

NAT types: Static Source, Static Destination,
Dynamic Source and NAPT

Enumeration

Enumerated Values:

1	static-source
2	static-destination
3	dynamic-source
4	napt
11	basic-nat44
12	dynamic-nat44
13	napt-44
14	dnat-44
15	stateful-nat64
16	stateless-nat64
17	basic-nat-pt
18	napt-pt
19	basic-nat66
20	stateless-nat66
21	napt-66
22	twice-napt-44
23	twice-basic-nat-44
24	twice-dynamic-nat-44
25	det-napt44
26	sd-napt44

.1.3.6.1.4.1.2636.3.59.1.1.2.1.2

jnxNatRuleTransHits

The number of hits on this NAT rule

SNMPv2-SMIUnsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2636.3.59.1.1.2.1.3

jnxNatPoolTable

table

.1.3.6.1.4.1.2636.3.59.1.1.3 · 1 row entry · 3 columns

Open in standard view

Uses the juniper variant from /opt/observium/mibs/juniper.

Command help

Walk jnxNatPoolTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'JUNIPER-NAT-MIB' -M '/opt/observium/mibs/juniper:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'JUNIPER-NAT-MIB::jnxNatPoolTable'

This table monitors NAT pool hits

jnxNatPoolEntry row .1.3.6.1.4.1.2636.3.59.1.1.3.1

NAT pool hit entries. It is indexed by the pool index

Indexes

jnxNatPoolName

Column Syntax OID

jnxNatPoolName

NAT Pool name

OctetString

Constraints:
range: 0-64

.1.3.6.1.4.1.2636.3.59.1.1.3.1.1

jnxNatPoolType

NAT types: Static Source, Static Destination,
Dynamic Source and NAPT

Enumeration

Enumerated Values:

1	static-source
2	static-destination
3	dynamic-source
4	napt
11	basic-nat44
12	dynamic-nat44
13	napt-44
14	dnat-44
15	stateful-nat64
16	stateless-nat64
17	basic-nat-pt
18	napt-pt
19	basic-nat66
20	stateless-nat66
21	napt-66
22	twice-napt-44
23	twice-basic-nat-44
24	twice-dynamic-nat-44
25	det-napt44
26	sd-napt44

.1.3.6.1.4.1.2636.3.59.1.1.3.1.2

jnxNatPoolTransHits

The number of hits on this NAT Pool

SNMPv2-SMIUnsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2636.3.59.1.1.3.1.3

jnxNatPbaStatsTable

table

.1.3.6.1.4.1.2636.3.59.1.1.4 · 1 row entry · 7 columns

Open in standard view

Uses the juniper variant from /opt/observium/mibs/juniper.

Command help

Walk jnxNatPbaStatsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'JUNIPER-NAT-MIB' -M '/opt/observium/mibs/juniper:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'JUNIPER-NAT-MIB::jnxNatPbaStatsTable'

This table monitors NAT PBA stats

jnxNatPbaStatsEntry row .1.3.6.1.4.1.2636.3.59.1.1.4.1

NAT PBA stats entries. It is indexed by the pool index

Indexes

jnxNatPbaPoolName

Column	Syntax	OID
jnxNatPbaPoolName NAT PBA Pool name	OctetString Constraints: `range: 0-64`	`.1.3.6.1.4.1.2636.3.59.1.1.4.1.1`
jnxNatPbaOutOfPortError The Number of times the out of port error is hit	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2636.3.59.1.1.4.1.2`
jnxNatPbaMaxNumberOfPortBlocksUsed The count of Max number of blocks used for the pool	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2636.3.59.1.1.4.1.3`
jnxNatPbaCurrentNumberOfPortBlocksInUse The count of current number of blocks used for the pool	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2636.3.59.1.1.4.1.4`
jnxNatPbaPortBlockAllocErrors The count of port block allocation errors	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2636.3.59.1.1.4.1.5`
jnxNatPbaPortBlockMemAllocErrors The count of port block memory allocation errors	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2636.3.59.1.1.4.1.6`
jnxNatPbaPortBlockLimitExeededErrors The count of port block limit exceeded errors hit	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2636.3.59.1.1.4.1.7`