JUNIPER-L2CP-FEATURES-MIB Table View

Defines the jnxDot1dStp Port Table for providing enterprise specific
extensions for Root Protect and Loop Protect to the corresponding 
dot1dStpPortTable entry.

jnxDot1dStpPortProtectEntry row .1.3.6.1.4.1.2636.3.53.1.1.1.1.1

Defines an entry in the jnxDot1dStpPortProtectTable. This essentially
augments the dot1dStpPortTable with additional objects.

Indexes

No indexes recorded

Column	Syntax	OID
jnxDot1dStpPortRootProtectEnabled A Boolean value set by management indicating whether Root protect functionality is enabled on the port. If TRUE causes the Port not to be selected as Root Port, even it has the best spanning tree priority vector. This…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2636.3.53.1.1.1.1.1.1
jnxDot1dStpPortRootProtectState Indicates whether the port was prevented from being a root port. This parameter will always return 'no-error (0)' if jnxDot1dStpPortRootProtectEnabled is FALSE.	Enumeration Enumerated Values: 0 no-error 1 root-prevented	.1.3.6.1.4.1.2636.3.53.1.1.1.1.1.2
jnxDot1dStpPortLoopProtectEnabled A Boolean value set by management indicating whether Loop protect functionality is enabled on the port. If TRUE causes the Port not to be selected as Designated Port when the received superior BPDU is aged out. This p…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2636.3.53.1.1.1.1.1.3
jnxDot1dStpPortLoopProtectState Indicates whether a potential Loop was prevented on the port This parameter will always return 'no-error (0)' if jnxDot1dStpPortLoopProtectEnabled is FALSE.	Enumeration Enumerated Values: 0 no-error 1 loop-prevented	.1.3.6.1.4.1.2636.3.53.1.1.1.1.1.4

Defines a Port Table for BPDU Protect information. This contains 
only those ports on which BPDU Protect can be configured.

jnxL2cpBpduProtectPortEntry row .1.3.6.1.4.1.2636.3.53.1.1.2.1.1

Defines an entry in the jnxL2cpBpduProtectPortTable. A list
containing BPDU Protect information for each Port.

Indexes

IF-MIBifIndex

Column	Syntax	OID
jnxL2cpBpduProtectPortEnabled A Boolean value set by management indicating whether BPDU protect functionality is enabled on the port. If TRUE causes the Port to be disabled (link down) upon receipt of a BPDU. This parameter should be FALSE by defau…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2636.3.53.1.1.2.1.1.1
jnxL2cpPortBpduError Indicates whether a BPDU was received on the port. This parameter will always return 'no-error (0)' if jnxL2cpBpduProtectPortEnabled is FALSE.	Enumeration Enumerated Values: 0 no-error 1 detected	.1.3.6.1.4.1.2636.3.53.1.1.2.1.1.2

A table that contains Link Aggregation Timeout information
about a port that is associated with this device.
A row appears in this table for each physical port.

dot3adAggPortTimeoutEntry row .1.3.6.1.4.1.2636.3.53.1.1.4.1.1

A list of Link Aggregation Control Protocol timeout information
for a port on this device.

Indexes

IF-MIBifIndex

Column	Syntax	OID
dot3adInterfaceName Physical port that is associated with Aggregation Port. This value is read-only.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2636.3.53.1.1.4.1.1.1
dot3adOperState A string of 8 bits, corresponding to the current operational values of Actor_State as transmitted by the Actor in LACPDUs. The bit allocations are as defined in 30.7.2.1.20. This attribute value is read-only.	LacpState Type Values: 0 lacpActivity 1 lacpTimeout 2 aggregation 3 synchronization 4 collecting 5 distributing 6 defaulted 7 expired	.1.3.6.1.4.1.2636.3.53.1.1.4.1.1.2
dot3adAggname Aggregation Port where Physical port is associated with. This value is read-only.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2636.3.53.1.1.4.1.1.3
dot3adInterfaceTimeout This object represents the time elapsed in seconds since lacp experienced timeout. This value is read-only.	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2636.3.53.1.1.4.1.1.4

Defines a Port Table for Loop Detect information. This contains
only those ports on which Loop Detect is configured.

jnxL2cpLoopDetectPortEntry row .1.3.6.1.4.1.2636.3.53.1.1.5.1.1

Defines an entry in the jnxL2cpLoopDetectPortTable. A list
containing Loop Detect information for each Port.

Indexes

IF-MIBifIndex

Column	Syntax	OID
jnxL2cpLoopDetectPortEnabled A Boolean value set by management indicating whether Loop Detect functionality is enabled on the port. If TRUE causes the Port to be disabled (link down) upon receipt of a Loop Detect PDU. This parameter should be FALSE…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2636.3.53.1.1.5.1.1.1
jnxL2cpLoopDetectPduError Indicates whether a Loop Detect PDU was received on the port. This parameter will always return 'no-error (0)' if jnxL2cpLoopDetectPortEnabled is FALSE.	Enumeration Enumerated Values: 0 no-error 1 detected	.1.3.6.1.4.1.2636.3.53.1.1.5.1.1.2