JUNIPER-JS-NAT-MIB Table View

This table monitors the port usage of the NAT interface 
source IP address pool.
          
Interface source pool is pre-defined.  This source pool is
referenced in a policy it is configured.  The security 
device translates the source IP address to the address of
the egress interface for the traffic matching a policy which 
references interface source pool.  The security device always 
applies port address translation (PAT) for interface source
pool.

jnxJsNatIfSrcPoolPortEntry row .1.3.6.1.4.1.2636.3.39.1.7.1.1.3.1

Source NAT address entries. It is indexed by the address
pool table and the address.

Indexes

jnxJsNatIfSrcPoolIndex

Column	Syntax	OID
jnxJsNatIfSrcPoolIndex The index of the port pool of this address pool.	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.2636.3.39.1.7.1.1.3.1.1
jnxJsNatIfSrcPoolTotalSinglePorts The total number of single ports in a port pool.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2636.3.39.1.7.1.1.3.1.2
jnxJsNatIfSrcPoolAllocSinglePorts The number of single ports in a port pool allocated or inuse.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2636.3.39.1.7.1.1.3.1.3
jnxJsNatIfSrcPoolTotalTwinPorts The total number of twin ports in a port pool.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2636.3.39.1.7.1.1.3.1.4
jnxJsNatIfSrcPoolAllocTwinPorts The number of twin ports in a port pool allocated or inuse.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2636.3.39.1.7.1.1.3.1.5

This table exposes the source NAT translation 
attributes of the translated addresses. 
          
When performing source IP address translation, the device 
translates the original source IP address and/or port 
number to different one.  The resource, address source pools
provide the security device with a supply of addresses from 
which to draw when performing source network address translation.
          
The security device has the following types of source pools:
	- source pool with PAT (Port Address Translation)
	- source pool without PAT
	- Static Source Pool
          
This table contains information on source IP address 
translation only.

jnxJsSrcNatStatsEntry row .1.3.6.1.4.1.2636.3.39.1.7.1.1.4.1

Source NAT address entries. It is indexed by the address
pool table and the address allocated.

Indexes

jnxJsNatSrcPoolName jnxJsNatSrcXlatedAddrType jnxJsNatSrcXlatedAddr

Column	Syntax	OID
jnxJsNatSrcPoolName The name of dynamic source IP address pool. This is the address pool where the translated address is allocated from.	OctetString Constraints: range: 1-64	.1.3.6.1.4.1.2636.3.39.1.7.1.1.4.1.1
jnxJsNatSrcXlatedAddrType The type of dynamic source IP address allocated from the address pool used in the NAT translation. For NAT MIB, supporting ipv4(1) and ipv6(2) only.	Enumeration Enumerated Values: 1 ipv4 2 ipv6	.1.3.6.1.4.1.2636.3.39.1.7.1.1.4.1.2
jnxJsNatSrcXlatedAddr The name of dynamic source IP address allocated from the address pool used in the NAT translation. For NAT MIB, supporting IPv4 and IPv6 address only.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.2636.3.39.1.7.1.1.4.1.3
jnxJsNatSrcPoolType Source NAT can do address translation with or without port address translation (PAT). The source port pool type indicates whether the address translation is done with port or without the port, or if it is a static tra…	Enumeration Enumerated Values: 1 withPAT 2 withoutPAT 3 static	.1.3.6.1.4.1.2636.3.39.1.7.1.1.4.1.4
jnxJsNatSrcNumPortInuse The number of ports in use for this NAT address entry. This attribute is only applicable to NAT translation with PAT.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2636.3.39.1.7.1.1.4.1.5
jnxJsNatSrcNumSessions The number of sessions are in use based on this NAT address entry.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2636.3.39.1.7.1.1.4.1.6
jnxJsNatSrcNumPortAvail The maximum number of ports available with this pool. This attribute is only applicable on MX platform to NAT translations with PAT.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2636.3.39.1.7.1.1.4.1.7
jnxJsNatSrcNumAddressAvail The maximum number of addresses available in this pool. This attribute is only applicable on MX platform.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2636.3.39.1.7.1.1.4.1.8
jnxJsNatSrcNumAddressInuse The number of addresses in use from this pool. This attribute is only applicable on MX platform to NAT translations without PAT.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2636.3.39.1.7.1.1.4.1.9
jnxJsNatSrcNumAddressMapped The number of public addresses mapped. This attribute is only applicable on MX platform for NAT translations with PAT.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2636.3.39.1.7.1.1.4.1.10

This table monitors NAT rule hits

jnxJsNatRuleEntry row .1.3.6.1.4.1.2636.3.39.1.7.1.1.5.1

NAT rule hit entries. It is indexed by the rule index

Indexes

jnxJsNatRuleName jnxJsNatRuleType

Column	Syntax	OID
jnxJsNatRuleName NAT rule name	OctetString Constraints: range: 1-64	.1.3.6.1.4.1.2636.3.39.1.7.1.1.5.1.1
jnxJsNatRuleType NAT types: Source, Destination and Static	Enumeration Enumerated Values: 1 source 2 destination 3 static	.1.3.6.1.4.1.2636.3.39.1.7.1.1.5.1.2
jnxJsNatRuleTransHitsdeprecated The number of hits on this NAT rule, Deprecated to avoid negative value.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2636.3.39.1.7.1.1.5.1.3
jnxJsNatRuleHits The number of hits on this NAT rule to deprecate jnxJsNatRuleTransHits	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2636.3.39.1.7.1.1.5.1.4
jnxJsNatRuleNumOfSessions The number of sessions on this NAT rule	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2636.3.39.1.7.1.1.5.1.5
jnxJsNatTransType The Translation type of this NAT rule	Enumeration Enumerated Values: 10 trans-type-none 11 basic-nat-pt 12 basic-nat44 13 basic-nat66 14 det-napt44 15 dynamic-nat44 16 napt-44 17 napt-66 18 napt-pt 19 det-napt64 20 stateful-nat464 21 stateful-nat64 22 dnat-44	.1.3.6.1.4.1.2636.3.39.1.7.1.1.5.1.6

This table monitors NAT pool hits

jnxJsNatPoolEntry row .1.3.6.1.4.1.2636.3.39.1.7.1.1.6.1

NAT pool hit entries. It is indexed by the pool index

Indexes

jnxJsNatPoolName jnxJsNatPoolType

Column	Syntax	OID
jnxJsNatPoolName NAT Pool name	OctetString Constraints: range: 1-64	.1.3.6.1.4.1.2636.3.39.1.7.1.1.6.1.1
jnxJsNatPoolType NAT types: Source, Destination and Static	Enumeration Enumerated Values: 1 source 2 destination 3 static	.1.3.6.1.4.1.2636.3.39.1.7.1.1.6.1.2
jnxJsNatPoolTransHitsdeprecated The number of hits on this NAT Pool, Deprecated to avoid negative value.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2636.3.39.1.7.1.1.6.1.3
jnxJsNatPoolHits The number of hits on this NAT Pool to deprecate jnxJsNatPoolTransHits.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2636.3.39.1.7.1.1.6.1.4
jnxJsNatPoolUtil The dynamic pool utilization in percentage.	Integer32 Constraints: range: 0-100	.1.3.6.1.4.1.2636.3.39.1.7.1.1.6.1.5

This table monitors NAT PBA stats

jnxJsNatPbaStatsEntry row .1.3.6.1.4.1.2636.3.39.1.7.1.1.7.1

NAT pool hit entries. It is indexed by the pool index

Indexes

jnxJsNatPbaPoolName

Column	Syntax	OID
jnxJsNatPbaPoolName NAT PBA Pool name	OctetString Constraints: range: 1-64	.1.3.6.1.4.1.2636.3.39.1.7.1.1.7.1.1
jnxJsNatPbaOutOfPortError The Number of times the out of port error is hit	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2636.3.39.1.7.1.1.7.1.2
jnxJsNatPbaMaxNumberOfPortBlocksUsed The count of Max number of blocks used for the pool	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2636.3.39.1.7.1.1.7.1.3
jnxJsNatPbaCurrentNumberOfPortBlocksInUse The count of current number of blocks used for the pool	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2636.3.39.1.7.1.1.7.1.4
jnxJsNatPbaPortBlockAllocErrors The count of port block allocation errors	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2636.3.39.1.7.1.1.7.1.5
jnxJsNatPbaPortBlockMemAllocErrors The count of port block memory allocation errors	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2636.3.39.1.7.1.1.7.1.6
jnxJsNatPbaPortBlockLimitExeededErrors The count of port block limit exceeded errors hit	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2636.3.39.1.7.1.1.7.1.7

This table provides utilization information of Port overloaded 
Source NAT Pool, per NAT IP address and per port overloading index.

jnxJsNatPortOverloadUtilEntry row .1.3.6.1.4.1.2636.3.39.1.7.1.1.8.1

Source NAT overloaded address-port entries.
Indexed by NAT Pool name, IP address and port overloading index

Indexes

jnxJsNatPortOverloadUtilPoolName jnxJsNatPortOverloadUtilIpAddressType jnxJsNatPortOverloadUtilIpAddress jnxJsNatPortOverloadUtilPortOvIndex

Column	Syntax	OID
jnxJsNatPortOverloadUtilPoolName Source NAT Pool name.	OctetString Constraints: range: 1-64	.1.3.6.1.4.1.2636.3.39.1.7.1.1.8.1.1
jnxJsNatPortOverloadUtilIpAddressType NAT IP address type, ipv4 or ipv6.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.2636.3.39.1.7.1.1.8.1.2
jnxJsNatPortOverloadUtilIpAddress Dynamic source IP address allocated from the address pool used in the NAT translation.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.2636.3.39.1.7.1.1.8.1.3
jnxJsNatPortOverloadUtilPortOvIndex Port overloading index corresponding to the NAT IP address.	Integer32 Constraints: range: 0-32	.1.3.6.1.4.1.2636.3.39.1.7.1.1.8.1.4
jnxJsNatPortOverloadUtilSinglePortTotal Total number of single ports corresponding to the NAT address and port overloading index.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2636.3.39.1.7.1.1.8.1.5
jnxJsNatPortOverloadUtilSinglePortAlloc Single ports in use corresponding to the NAT address and port overloading index.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2636.3.39.1.7.1.1.8.1.6
jnxJsNatPortOverloadUtilSinglePortUtil Single ports utilization (in percentage) corresponding to the NAT address and port overloading index.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2636.3.39.1.7.1.1.8.1.7
jnxJsNatPortOverloadUtilTwinPortTotal Total number of twin ports corresponding to the NAT address and port overloading index.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2636.3.39.1.7.1.1.8.1.8
jnxJsNatPortOverloadUtilTwinPortAlloc Twin ports in use corresponding to the NAT address and port overloading index.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2636.3.39.1.7.1.1.8.1.9
jnxJsNatPortOverloadUtilTwinPortUtil Twin ports utilization (in percentage) corresponding to the NAT address and port overloading index.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2636.3.39.1.7.1.1.8.1.10