JUNIPER-ANALYZER-MIB Table View

Network traffic passing through ports is analyzed by sending a
copy of the traffic to another port on the same or different switch. 
This table contains the analyzer parameters.

jnxAnalyzerEntry row .1.3.6.1.4.1.2636.3.40.1.1.1.1.1.1

A row instance contains the Analyzer Name, Analyzer Status, Mirroring
Ratio, Loss Priority.

Indexes

jnxAnalyzerName

Column	Syntax	OID
jnxAnalyzerName This object identifies a unique Analyzer configured on the switch.	OctetString Constraints: range: 0-255	.1.3.6.1.4.1.2636.3.40.1.1.1.1.1.1.1
jnxAnalyzerStatusobsolete This object identifies whether the mirroring associated with a particular analyzer is enabled or disabled.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2636.3.40.1.1.1.1.1.1.2
jnxMirroringRatio This object will specify the mirroring ratio. User can configure the analyzer to mirror only one out of X packets [1:X packets] in the ingress/egress side based on whether the port is configured for ingress or egress …	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2636.3.40.1.1.1.1.1.1.3
jnxLossPriority The analyzer port may be congested when the number of packets exceeds the bandwidth of the analyzer port. So the loss-priority parameter is enabled. The switched packets will not get affected by this. The value 0 cor…	Enumeration Enumerated Values: 0 low 1 high	.1.3.6.1.4.1.2636.3.40.1.1.1.1.1.1.4

An analyzer Session is an association of several source ports to 
a destination port.A range or series of ports can be mirrored in
a session.

jnxAnalyzerInputEntry row .1.3.6.1.4.1.2636.3.40.1.1.1.1.2.1

An Entry is created for each Input Source port.

Indexes

jnxAnalyzerName jnxAnalyzerInputValue

Column	Syntax	OID
jnxAnalyzerInputValueobsolete This identifies each different analyzer input source. If the value of jnxAnalyzerInputType is 1 then jnxAnalyzerInputValue refers to the input source Interface Name. If the value of jnxAnal…	OctetString Constraints: range: 0-255	.1.3.6.1.4.1.2636.3.40.1.1.1.1.2.1.1
jnxAnalyzerInputOptionobsolete A source port is a switch port that is been mirrored. It can be mirrored based either on Ingress(received) traffic or egress (transmitted) traffic. The goal of receive (or ingress) Analyzer is to monitor…	Enumeration Enumerated Values: 1 ingress 2 egress	.1.3.6.1.4.1.2636.3.40.1.1.1.1.2.1.2
jnxAnalyzerInputTypeobsolete This specifies whether interfaces or VLANs is mirrored. Mirroring can be done on the basis of the interface name.All packets received on a port configured for ingress mirroring is sent to the analyzer…	Enumeration Enumerated Values: 1 interface 2 vlanname	.1.3.6.1.4.1.2636.3.40.1.1.1.1.2.1.3

This table describes the destination port to which the traffic from 
the source ports are copied.

jnxAnalyzerOutputEntry row .1.3.6.1.4.1.2636.3.40.1.1.1.1.3.1

An Entry is created for each destination port or destination vlan.

Indexes

jnxAnalyzerName jnxAnalyzerOutputValue

Column	Syntax	OID
jnxAnalyzerOutputValue This object identifies each different destination port or destination vlan. If the value of jnxAnalyzerOutputType is 1 then jnxAnalyzerOutputValue gives the destination interface name. If …	OctetString Constraints: range: 0-255	.1.3.6.1.4.1.2636.3.40.1.1.1.1.3.1.1
jnxAnalyzerOutputType The destination port can be on the same switch or on a different switch(Remote Analyzer). Value 1 specifies that the destination interface is on the same switch and it receives a copy of traffic from th…	Enumeration Enumerated Values: 1 interface 2 vlanname	.1.3.6.1.4.1.2636.3.40.1.1.1.1.3.1.2

An analyzer Session is an association of several source ports to
a destination port.A range or series of ports can be mirrored in
a session.

jnxExAnalyzerInputEntry row .1.3.6.1.4.1.2636.3.40.1.1.1.1.4.1

An Entry is created for each Input Source port.

Indexes

jnxAnalyzerName jnxExAnalyzerInputOption jnxExAnalyzerInputValue

Column	Syntax	OID
jnxExAnalyzerInputOption A source port is a switch port that is been mirrored. It can be mirrored based either on Ingress(received) traffic or egress (transmitted) traffic. The goal of receive (or ingress) Analyzer is to monitor …	Enumeration Enumerated Values: 1 ingress 2 egress 3 vlan 4 egress-vlan	.1.3.6.1.4.1.2636.3.40.1.1.1.1.4.1.1
jnxExAnalyzerInputValue This identifies each different analyzer input source. If the value of jnxExAnalyzerInputType is 1 then jnxExAnalyzerInputValue refers to the input source Interface Name. If the value of jnx…	OctetString Constraints: range: 0-255	.1.3.6.1.4.1.2636.3.40.1.1.1.1.4.1.2
jnxExAnalyzerInputType This specifies whether interfaces or VLANs is mirrored. Mirroring can be done on the basis of the interface name.All packets received on a port configured for ingress mirroring is sent to the analyzer por…	Enumeration Enumerated Values: 1 interface 2 vlanname	.1.3.6.1.4.1.2636.3.40.1.1.1.1.4.1.3