JNX-OPT-IF-MIB Table View

Column Syntax OID

jnxoptIfOTMnOrder

This object indicates the order of the OTM, which
represents the maximum number of wavelengths that can be
supported at the bit rate(s) supported on the interface.

Unsigned32

Constraints:
range: 1-900

.1.3.6.1.4.1.2636.3.73.1.1.1.1.1.1

jnxoptIfOTMnReduced

This object indicates whether a reduced or full
functionality is supported at the interface. A value of
true means reduced. A value of false means full.

jnxoptIfOTMnInterfaceType

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2636.3.73.1.1.1.1.1.2

jnxoptIfOTMnBitRates

This attribute is a bit map representing the bit
rate or set of bit rates supported on the interface.
The meaning of each bit position is as follows:
bitRateK1(0) is set if the 2.5 Gbit/s rate is supported
bitRateK2(…

Bits

Enumerated Values:

0	bitRateK1
1	bitRateK2
2	bitRateK3

.1.3.6.1.4.1.2636.3.73.1.1.1.1.1.3

This object identifies the type of interface. The value of
this attribute will affect the behavior of the OTM with
respect to presence/absence of OTM Overhead Signal (OOS)
processing and TCM activation. For an IrDI i…

SNMP-FRAMEWORK-MIBSnmpAdminString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.2636.3.73.1.1.1.1.1.4

jnxoptIfOTMnTcmMax

This object identifies the maximum number of TCM
levels allowed for any Optical Channel contained
in this OTM. A new TCM activation will be rejected
if the requested level is greater than the threshold.
If Interface…

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2636.3.73.1.1.1.1.1.5

jnxoptIfOTMnOpticalReach

This object indicates the length the optical signal
may travel before requiring termination or regeneration.
The meaning of the enumeration are:
intraOffice(1) - intra-office (as defined in ITU-T G.957)
shortHaul(2) …

Enumeration

Enumerated Values:

1	intraOffice
2	shortHaul
3	longHaul
4	veryLongHaul
5	ultraLongHaul

.1.3.6.1.4.1.2636.3.73.1.1.1.1.1.6

jnxoptIfPerfMonIntervalTable

table

.1.3.6.1.4.1.2636.3.73.1.1.2.1 · 1 row entry · 4 columns

Open in standard view

Uses the juniper variant from /opt/observium/mibs/juniper.

Command help

Walk jnxoptIfPerfMonIntervalTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'JNX-OPT-IF-MIB' -M '/opt/observium/mibs/juniper:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'JNX-OPT-IF-MIB::jnxoptIfPerfMonIntervalTable'

A table of 15-minute performance monitoring interval 
information.

jnxoptIfPerfMonIntervalEntry row .1.3.6.1.4.1.2636.3.73.1.1.2.1.1

A conceptual row that contains 15-minute performance
monitoring interval information of an interface.

Indexes

Column	Syntax	OID
jnxoptIfPerfMonCurrentTimeElapsed Number of seconds elapsed in the current 15-minute performance monitoring interval. If, for some reason, such as an adjustment in the NE's time-of-day clock, the number of seconds elapsed exceeds the maximum value, …	secondsUnsigned32 Constraints: `range: 0-900`	`.1.3.6.1.4.1.2636.3.73.1.1.2.1.1.1`
jnxoptIfPerfMonCurDayTimeElapsed Number of seconds elapsed in the current 24-hour interval performance monitoring period. If, for some reason, such as an adjustment in the NE time-of-day clock, the number of seconds elapsed exceeds the maximum valu…	secondsUnsigned32 Constraints: `range: 0-86400`	`.1.3.6.1.4.1.2636.3.73.1.1.2.1.1.2`
jnxoptIfPerfMonIntervalNumIntervals The number of 15-minute intervals for which performance monitoring data is available. The number is the same for all the associated sub layers of the interface. An optical interface must be capable of supporting at l…	Unsigned32 Constraints: `range: 0-96`	`.1.3.6.1.4.1.2636.3.73.1.1.2.1.1.3`
jnxoptIfPerfMonIntervalNumInvalidIntervals The number of intervals in the range from 0 to jnxoptIfPerfMonIntervalNumIntervals for which no performance monitoring data is available and/or the data is invalid.	Unsigned32 Constraints: `range: 0-96`	`.1.3.6.1.4.1.2636.3.73.1.1.2.1.1.4`

jnxoptIfOTSnConfigTable

table

.1.3.6.1.4.1.2636.3.73.1.1.3.1 · 1 row entry · 10 columns

Open in standard view

Uses the juniper variant from /opt/observium/mibs/juniper.

Command help

Walk jnxoptIfOTSnConfigTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'JNX-OPT-IF-MIB' -M '/opt/observium/mibs/juniper:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'JNX-OPT-IF-MIB::jnxoptIfOTSnConfigTable'

A table of OTSn configuration information.

jnxoptIfOTSnConfigEntry row .1.3.6.1.4.1.2636.3.73.1.1.3.1.1

A conceptual row that contains OTSn configuration
information of an interface.

Indexes

jnxoptIfOTSnDirectionality

Column Syntax OID

Indicates the directionality of the entity.

SNMP-FRAMEWORK-MIBSnmpAdminString

Type Values:

1	sink
2	source
3	bidirectional

.1.3.6.1.4.1.2636.3.73.1.1.3.1.1.1

jnxoptIfOTSnAprStatus

This attribute indicates the status of the Automatic
Power Reduction (APR) function of the entity. Valid
values are 'on' and 'off'.

Type Constraints:
range: 0..255

.1.3.6.1.4.1.2636.3.73.1.1.3.1.1.2

jnxoptIfOTSnAprControl

This object is a UTF-8 encoded string that specifies Automatic
Power Reduction (APR) control actions requested of this entity
(when written) and that returns the current APR control state
of this entity (when read). …

SNMP-FRAMEWORK-MIBSnmpAdminStringr/w

Type Constraints:
range: 0..255

.1.3.6.1.4.1.2636.3.73.1.1.3.1.1.3

jnxoptIfOTSnTraceIdentifierTransmitted

The trace identifier transmitted.
This object is applicable when jnxoptIfOTSnDirectionality has the
value source(2) or bidirectional(3).
This object does not apply to reduced-capability systems (i.e.,
those for whic…

Type Constraints:
range: 64

.1.3.6.1.4.1.2636.3.73.1.1.3.1.1.4

jnxoptIfOTSnDAPIExpected

The DAPI expected by the receiver.
This object is applicable when jnxoptIfOTSnDirectionality has the
value sink(1) or bidirectional(3). It has no effect if
jnxoptIfOTSnTIMDetMode has the value off(1) or sapi(3).
Thi…

Type Constraints:
range: 16

.1.3.6.1.4.1.2636.3.73.1.1.3.1.1.5

jnxoptIfOTSnSAPIExpected

The SAPI expected by the receiver.
This object is applicable when jnxoptIfOTSnDirectionality has the
value sink(1) or bidirectional(3). It has no effect if
jnxoptIfOTSnTIMDetMode has the value off(1) or dapi(2).
Thi…

jnxoptIfOTSnTraceIdentifierAccepted

Type Constraints:
range: 16

.1.3.6.1.4.1.2636.3.73.1.1.3.1.1.6

The actual trace identifier received.
This object is applicable when jnxoptIfOTSnDirectionality has the
value sink(1) or bidirectional(3). Its value is unspecified
if jnxoptIfOTSnCurrentStatus has either or both of t…

Type Constraints:
range: 64

.1.3.6.1.4.1.2636.3.73.1.1.3.1.1.7

jnxoptIfOTSnTIMDetMode

Indicates the mode of the Trace Identifier Mismatch (TIM)
Detection function. This object is applicable
when jnxoptIfOTSnDirectionality has the value sink(1)
or bidirectional(3). The default value is off(1).
This ob…

jnxoptIfOTSnTIMActEnabled

Type Values:

1	off
2	dapi
3	sapi
4	both

.1.3.6.1.4.1.2636.3.73.1.1.3.1.1.8

Indicates whether the Trace Identifier Mismatch (TIM)
Consequent Action function is enabled. This object
is applicable when jnxoptIfOTSnDirectionality has the
value sink(1) or bidirectional(3). It has no effect
when…

jnxoptIfOTSnCurrentStatus

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2636.3.73.1.1.3.1.1.9

Indicates the defect condition of the entity, if any.
This object is applicable when jnxoptIfOTSnDirectionality
has the value sink(1) or bidirectional(3). In
reduced-capability systems or at IrDI interfaces
the only…

Bits

Enumerated Values:

0	bdiP
1	bdiO
2	bdi
3	tim
4	losP
5	losO
6	los

.1.3.6.1.4.1.2636.3.73.1.1.3.1.1.10

jnxoptIfOTSnSinkCurrentTable

table

.1.3.6.1.4.1.2636.3.73.1.1.3.2 · 1 row entry · 11 columns

Open in standard view

Uses the juniper variant from /opt/observium/mibs/juniper.

Command help

Walk jnxoptIfOTSnSinkCurrentTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'JNX-OPT-IF-MIB' -M '/opt/observium/mibs/juniper:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'JNX-OPT-IF-MIB::jnxoptIfOTSnSinkCurrentTable'

A table of OTSn sink performance monitoring information for 
the current 15-minute interval.

jnxoptIfOTSnSinkCurrentEntry row .1.3.6.1.4.1.2636.3.73.1.1.3.2.1

A conceptual row that contains OTSn sink performance
monitoring information of an interface for the current
15-minute interval.

Indexes

jnxoptIfOTSnSinkCurrentSuspectedFlag

Column Syntax OID

If true, the data in this entry may be unreliable.

jnxoptIfOTSnSinkCurrentInputPower

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2636.3.73.1.1.3.2.1.1

The optical power monitored at the input.

jnxoptIfOTSnSinkCurrentLowInputPower

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.3.2.1.2

The lowest optical power monitored at the input during the
current 15-minute interval.

jnxoptIfOTSnSinkCurrentHighInputPower

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.3.2.1.3

The highest optical power monitored at the input during the
current 15-minute interval.

jnxoptIfOTSnSinkCurrentLowerInputPowerThreshold

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.3.2.1.4

The lower limit threshold on input power. If
jnxoptIfOTSnSinkCurrentInputPower drops to this value or below,
a Threshold Crossing Alert (TCA) should be sent.

0.1 dbmSNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.3.2.1.5

jnxoptIfOTSnSinkCurrentUpperInputPowerThreshold

The upper limit threshold on input power. If
jnxoptIfOTSnSinkCurrentInputPower reaches or exceeds this value,
a Threshold Crossing Alert (TCA) should be sent.

0.1 dbmSNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.3.2.1.6

jnxoptIfOTSnSinkCurrentOutputPower

The optical power monitored at the output.

jnxoptIfOTSnSinkCurrentLowOutputPower

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.3.2.1.7

The lowest optical power monitored at the output during the
current 15-minute interval.

jnxoptIfOTSnSinkCurrentHighOutputPower

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.3.2.1.8

The highest optical power monitored at the output during the
current 15-minute interval.

jnxoptIfOTSnSinkCurrentLowerOutputPowerThreshold

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.3.2.1.9

The lower limit threshold on output power. If
jnxoptIfOTSnSinkCurrentOutputPower drops to this value or below,
a Threshold Crossing Alert (TCA) should be sent.

0.1 dbmSNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.3.2.1.10

jnxoptIfOTSnSinkCurrentUpperOutputPowerThreshold

The upper limit threshold on output power. If
jnxoptIfOTSnSinkCurrentOutputPower reaches or exceeds this value,
a Threshold Crossing Alert (TCA) should be sent.

0.1 dbmSNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.3.2.1.11

jnxoptIfOTSnSinkIntervalTable

table

.1.3.6.1.4.1.2636.3.73.1.1.3.3 · 1 row entry · 8 columns

Open in standard view

Uses the juniper variant from /opt/observium/mibs/juniper.

Command help

Walk jnxoptIfOTSnSinkIntervalTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'JNX-OPT-IF-MIB' -M '/opt/observium/mibs/juniper:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'JNX-OPT-IF-MIB::jnxoptIfOTSnSinkIntervalTable'

A table of historical OTSn sink performance monitoring 
information.

jnxoptIfOTSnSinkIntervalEntry row .1.3.6.1.4.1.2636.3.73.1.1.3.3.1

A conceptual row that contains OTSn sink performance
monitoring information of an interface during a particular
historical interval.

Indexes

IF-MIBifIndex jnxoptIfOTSnSinkIntervalNumber

Column Syntax OID

jnxoptIfOTSnSinkIntervalNumber

Uniquely identifies the interval.

jnxoptIfOTSnSinkIntervalSuspectedFlag

Type Constraints:
range: 1..96

.1.3.6.1.4.1.2636.3.73.1.1.3.3.1.1

If true, the data in this entry may be unreliable.

jnxoptIfOTSnSinkIntervalLastInputPower

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2636.3.73.1.1.3.3.1.2

The last optical power monitored at the input during the
interval.

jnxoptIfOTSnSinkIntervalLowInputPower

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.3.3.1.3

The lowest optical power monitored at the input during the
interval.

jnxoptIfOTSnSinkIntervalHighInputPower

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.3.3.1.4

The highest optical power monitored at the input during the
interval.

jnxoptIfOTSnSinkIntervalLastOutputPower

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.3.3.1.5

The last optical power monitored at the output during the
interval.

jnxoptIfOTSnSinkIntervalLowOutputPower

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.3.3.1.6

The lowest optical power monitored at the output during the
interval.

jnxoptIfOTSnSinkIntervalHighOutputPower

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.3.3.1.7

The highest optical power monitored at the output during the
interval.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.3.3.1.8

jnxoptIfOTSnSinkCurDayTable

table

.1.3.6.1.4.1.2636.3.73.1.1.3.4 · 1 row entry · 5 columns

Open in standard view

Uses the juniper variant from /opt/observium/mibs/juniper.

Command help

Walk jnxoptIfOTSnSinkCurDayTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'JNX-OPT-IF-MIB' -M '/opt/observium/mibs/juniper:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'JNX-OPT-IF-MIB::jnxoptIfOTSnSinkCurDayTable'

A table of OTSn sink performance monitoring information for 
the current 24-hour interval.

jnxoptIfOTSnSinkCurDayEntry row .1.3.6.1.4.1.2636.3.73.1.1.3.4.1

A conceptual row that contains OTSn sink performance
monitoring information of an interface for the current
24-hour interval.

Indexes

jnxoptIfOTSnSinkCurDaySuspectedFlag

Column Syntax OID

If true, the data in this entry may be unreliable.

jnxoptIfOTSnSinkCurDayLowInputPower

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2636.3.73.1.1.3.4.1.1

The lowest optical power monitored at the input during the
current 24-hour interval.

jnxoptIfOTSnSinkCurDayHighInputPower

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.3.4.1.2

The highest optical power monitored at the input during the
current 24-hour interval.

jnxoptIfOTSnSinkCurDayLowOutputPower

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.3.4.1.3

The lowest optical power monitored at the output during the
current 24-hour interval.

jnxoptIfOTSnSinkCurDayHighOutputPower

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.3.4.1.4

The highest optical power monitored at the output during the
current 24-hour interval.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.3.4.1.5

jnxoptIfOTSnSinkPrevDayTable

table

.1.3.6.1.4.1.2636.3.73.1.1.3.5 · 1 row entry · 7 columns

Open in standard view

Uses the juniper variant from /opt/observium/mibs/juniper.

Command help

Walk jnxoptIfOTSnSinkPrevDayTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'JNX-OPT-IF-MIB' -M '/opt/observium/mibs/juniper:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'JNX-OPT-IF-MIB::jnxoptIfOTSnSinkPrevDayTable'

A table of OTSn sink performance monitoring information for 
the previous 24-hour interval.

jnxoptIfOTSnSinkPrevDayEntry row .1.3.6.1.4.1.2636.3.73.1.1.3.5.1

A conceptual row that contains OTSn sink performance
monitoring information of an interface for the previous
24-hour interval.

Indexes

jnxoptIfOTSnSinkPrevDaySuspectedFlag

Column Syntax OID

If true, the data in this entry may be unreliable.

jnxoptIfOTSnSinkPrevDayLastInputPower

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2636.3.73.1.1.3.5.1.1

The last optical power monitored at the input during the
previous 24-hour interval.

jnxoptIfOTSnSinkPrevDayLowInputPower

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.3.5.1.2

The lowest optical power monitored at the input during the
previous 24-hour interval.

jnxoptIfOTSnSinkPrevDayHighInputPower

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.3.5.1.3

The highest optical power monitored at the input during the
previous 24-hour interval.

jnxoptIfOTSnSinkPrevDayLastOutputPower

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.3.5.1.4

The last optical power monitored at the output during the
previous 24-hour interval.

jnxoptIfOTSnSinkPrevDayLowOutputPower

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.3.5.1.5

The lowest optical power monitored at the output during the
previous 24-hour interval.

jnxoptIfOTSnSinkPrevDayHighOutputPower

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.3.5.1.6

The highest optical power monitored at the output during the
previous 24-hour interval.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.3.5.1.7

jnxoptIfOTSnSrcCurrentTable

table

.1.3.6.1.4.1.2636.3.73.1.1.3.6 · 1 row entry · 11 columns

Open in standard view

Uses the juniper variant from /opt/observium/mibs/juniper.

Command help

Walk jnxoptIfOTSnSrcCurrentTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'JNX-OPT-IF-MIB' -M '/opt/observium/mibs/juniper:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'JNX-OPT-IF-MIB::jnxoptIfOTSnSrcCurrentTable'

A table of OTSn source performance monitoring information for 
the current 15-minute interval.

jnxoptIfOTSnSrcCurrentEntry row .1.3.6.1.4.1.2636.3.73.1.1.3.6.1

A conceptual row that contains OTSn source performance
monitoring information of an interface for the current
15-minute interval.

Indexes

jnxoptIfOTSnSrcCurrentSuspectedFlag

Column Syntax OID

If true, the data in this entry may be unreliable.

jnxoptIfOTSnSrcCurrentOutputPower

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2636.3.73.1.1.3.6.1.1

The optical power monitored at the output.

jnxoptIfOTSnSrcCurrentLowOutputPower

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.3.6.1.2

The lowest optical power monitored at the output during the
current 15-minute interval.

jnxoptIfOTSnSrcCurrentHighOutputPower

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.3.6.1.3

The highest optical power monitored at the output during the
current 15-minute interval.

jnxoptIfOTSnSrcCurrentLowerOutputPowerThreshold

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.3.6.1.4

The lower limit threshold on output power. If
jnxoptIfOTSnSrcCurrentOutputPower drops to this value or below,
a Threshold Crossing Alert (TCA) should be sent.

0.1 dbmSNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.3.6.1.5

jnxoptIfOTSnSrcCurrentUpperOutputPowerThreshold

The upper limit threshold on output power. If
jnxoptIfOTSnSrcCurrentOutputPower reaches or exceeds this value,
a Threshold Crossing Alert (TCA) should be sent.

0.1 dbmSNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.3.6.1.6

jnxoptIfOTSnSrcCurrentInputPower

The optical power monitored at the input.

jnxoptIfOTSnSrcCurrentLowInputPower

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.3.6.1.7

The lowest optical power monitored at the input during the
current 15-minute interval.

jnxoptIfOTSnSrcCurrentHighInputPower

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.3.6.1.8

The highest optical power monitored at the input during the
current 15-minute interval.

jnxoptIfOTSnSrcCurrentLowerInputPowerThreshold

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.3.6.1.9

The lower limit threshold on input power. If
jnxoptIfOTSnSrcCurrentInputPower drops to this value or below,
a Threshold Crossing Alert (TCA) should be sent.

0.1 dbmSNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.3.6.1.10

jnxoptIfOTSnSrcCurrentUpperInputPowerThreshold

The upper limit threshold on input power. If
jnxoptIfOTSnSrcCurrentInputPower reaches or exceeds this value,
a Threshold Crossing Alert (TCA) should be sent.

0.1 dbmSNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.3.6.1.11

jnxoptIfOTSnSrcIntervalTable

table

.1.3.6.1.4.1.2636.3.73.1.1.3.7 · 1 row entry · 8 columns

Open in standard view

Uses the juniper variant from /opt/observium/mibs/juniper.

Command help

Walk jnxoptIfOTSnSrcIntervalTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'JNX-OPT-IF-MIB' -M '/opt/observium/mibs/juniper:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'JNX-OPT-IF-MIB::jnxoptIfOTSnSrcIntervalTable'

A table of historical OTSn source performance monitoring 
information.

jnxoptIfOTSnSrcIntervalEntry row .1.3.6.1.4.1.2636.3.73.1.1.3.7.1

A conceptual row that contains OTSn source performance
monitoring information of an interface during a particular
historical interval.

Indexes

IF-MIBifIndex jnxoptIfOTSnSrcIntervalNumber

Column Syntax OID

jnxoptIfOTSnSrcIntervalNumber

Uniquely identifies the interval.

jnxoptIfOTSnSrcIntervalSuspectedFlag

Type Constraints:
range: 1..96

.1.3.6.1.4.1.2636.3.73.1.1.3.7.1.1

If true, the data in this entry may be unreliable.

jnxoptIfOTSnSrcIntervalLastOutputPower

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2636.3.73.1.1.3.7.1.2

The last optical power monitored at the output during the
interval.

jnxoptIfOTSnSrcIntervalLowOutputPower

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.3.7.1.3

The lowest optical power monitored at the output during the
interval.

jnxoptIfOTSnSrcIntervalHighOutputPower

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.3.7.1.4

The highest optical power monitored at the output during the
interval.

jnxoptIfOTSnSrcIntervalLastInputPower

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.3.7.1.5

The last optical power monitored at the input during the
interval.

jnxoptIfOTSnSrcIntervalLowInputPower

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.3.7.1.6

The lowest optical power monitored at the input during the
interval.

jnxoptIfOTSnSrcIntervalHighInputPower

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.3.7.1.7

The highest optical power monitored at the input during the
interval.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.3.7.1.8

jnxoptIfOTSnSrcCurDayTable

table

.1.3.6.1.4.1.2636.3.73.1.1.3.8 · 1 row entry · 5 columns

Open in standard view

Uses the juniper variant from /opt/observium/mibs/juniper.

Command help

Walk jnxoptIfOTSnSrcCurDayTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'JNX-OPT-IF-MIB' -M '/opt/observium/mibs/juniper:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'JNX-OPT-IF-MIB::jnxoptIfOTSnSrcCurDayTable'

A table of OTSn source performance monitoring information for 
the current 24-hour interval.

jnxoptIfOTSnSrcCurDayEntry row .1.3.6.1.4.1.2636.3.73.1.1.3.8.1

A conceptual row that contains OTSn source performance
monitoring information of an interface for the current
24-hour interval.

Indexes

jnxoptIfOTSnSrcCurDaySuspectedFlag

Column Syntax OID

If true, the data in this entry may be unreliable.

jnxoptIfOTSnSrcCurDayLowOutputPower

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2636.3.73.1.1.3.8.1.1

The lowest optical power monitored at the output during the
current 24-hour interval.

jnxoptIfOTSnSrcCurDayHighOutputPower

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.3.8.1.2

The highest optical power monitored at the output during the
current 24-hour interval.

jnxoptIfOTSnSrcCurDayLowInputPower

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.3.8.1.3

The lowest optical power monitored at the input during the
current 24-hour interval.

jnxoptIfOTSnSrcCurDayHighInputPower

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.3.8.1.4

The highest optical power monitored at the input during the
current 24-hour interval.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.3.8.1.5

jnxoptIfOTSnSrcPrevDayTable

table

.1.3.6.1.4.1.2636.3.73.1.1.3.9 · 1 row entry · 7 columns

Open in standard view

Uses the juniper variant from /opt/observium/mibs/juniper.

Command help

Walk jnxoptIfOTSnSrcPrevDayTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'JNX-OPT-IF-MIB' -M '/opt/observium/mibs/juniper:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'JNX-OPT-IF-MIB::jnxoptIfOTSnSrcPrevDayTable'

A table of OTSn source performance monitoring information for 
the previous 24-hour interval.

jnxoptIfOTSnSrcPrevDayEntry row .1.3.6.1.4.1.2636.3.73.1.1.3.9.1

A conceptual row that contains OTSn source performance
monitoring information of an interface for the previous
24-hour interval.

Indexes

jnxoptIfOTSnSrcPrevDaySuspectedFlag

Column Syntax OID

If true, the data in this entry may be unreliable.

jnxoptIfOTSnSrcPrevDayLastOutputPower

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2636.3.73.1.1.3.9.1.1

The last optical power monitored at the output during the
previous 24-hour interval.

jnxoptIfOTSnSrcPrevDayLowOutputPower

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.3.9.1.2

The lowest optical power monitored at the output during the
previous 24-hour interval.

jnxoptIfOTSnSrcPrevDayHighOutputPower

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.3.9.1.3

The highest optical power monitored at the output during the
previous 24-hour interval.

jnxoptIfOTSnSrcPrevDayLastInputPower

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.3.9.1.4

The last optical power monitored at the input during the
previous 24-hour interval.

jnxoptIfOTSnSrcPrevDayLowInputPower

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.3.9.1.5

The lowest optical power monitored at the input during the
previous 24-hour interval.

jnxoptIfOTSnSrcPrevDayHighInputPower

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.3.9.1.6

The highest optical power monitored at the input during the
previous 24-hour interval.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.3.9.1.7

jnxoptIfOMSnConfigTable

table

.1.3.6.1.4.1.2636.3.73.1.1.4.1 · 1 row entry · 2 columns

Open in standard view

Uses the juniper variant from /opt/observium/mibs/juniper.

Command help

Walk jnxoptIfOMSnConfigTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'JNX-OPT-IF-MIB' -M '/opt/observium/mibs/juniper:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'JNX-OPT-IF-MIB::jnxoptIfOMSnConfigTable'

A table of OMSn configuration information.

jnxoptIfOMSnConfigEntry row .1.3.6.1.4.1.2636.3.73.1.1.4.1.1

A conceptual row that contains OMSn configuration
information of an interface.

Indexes

jnxoptIfOMSnDirectionality

Column Syntax OID

Indicates the directionality of the entity.

jnxoptIfOMSnCurrentStatus

Type Values:

1	sink
2	source
3	bidirectional

.1.3.6.1.4.1.2636.3.73.1.1.4.1.1.1

Indicates the defect condition of the entity, if any.
This object is applicable only to full capability
systems whose interface type is IaDI and for which
jnxoptIfOMSnDirectionality has the value sink(1) or
bidirect…

Bits

Enumerated Values:

0	ssfP
1	ssfO
2	ssf
3	bdiP
4	bdiO
5	bdi
6	losP

.1.3.6.1.4.1.2636.3.73.1.1.4.1.1.2

jnxoptIfOMSnSinkCurrentTable

table

.1.3.6.1.4.1.2636.3.73.1.1.4.2 · 1 row entry · 11 columns

Open in standard view

Uses the juniper variant from /opt/observium/mibs/juniper.

Command help

Walk jnxoptIfOMSnSinkCurrentTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'JNX-OPT-IF-MIB' -M '/opt/observium/mibs/juniper:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'JNX-OPT-IF-MIB::jnxoptIfOMSnSinkCurrentTable'

A table of OMSn sink performance monitoring information for 
the current 15-minute interval.

jnxoptIfOMSnSinkCurrentEntry row .1.3.6.1.4.1.2636.3.73.1.1.4.2.1

A conceptual row that contains OMSn sink performance
monitoring information of an interface for the current
15-minute interval.

Indexes

jnxoptIfOMSnSinkCurrentSuspectedFlag

Column Syntax OID

If true, the data in this entry may be unreliable.

jnxoptIfOMSnSinkCurrentAggregatedInputPower

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2636.3.73.1.1.4.2.1.1

The aggregated optical power of all the DWDM input
channels.

jnxoptIfOMSnSinkCurrentLowAggregatedInputPower

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.4.2.1.2

The lowest aggregated optical power of all the DWDM input
channels during the current 15-minute interval.

jnxoptIfOMSnSinkCurrentHighAggregatedInputPower

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.4.2.1.3

The highest aggregated optical power of all the DWDM input
channels during the current 15-minute interval.

jnxoptIfOMSnSinkCurrentLowerInputPowerThreshold

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.4.2.1.4

The lower limit threshold on aggregated input power. If
jnxoptIfOMSnSinkCurrentAggregatedInputPower drops to this value
or below, a Threshold Crossing Alert (TCA) should be sent.

0.1 dbmSNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.4.2.1.5

jnxoptIfOMSnSinkCurrentUpperInputPowerThreshold

The upper limit threshold on aggregated input power. If
jnxoptIfOMSnSinkCurrentAggregatedInputPower reaches or exceeds
this value, a Threshold Crossing Alert (TCA) should be sent.

0.1 dbmSNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.4.2.1.6

jnxoptIfOMSnSinkCurrentOutputPower

The optical power monitored at the output.

jnxoptIfOMSnSinkCurrentLowOutputPower

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.4.2.1.7

The lowest optical power monitored at the output
during the current 15-minute interval.

jnxoptIfOMSnSinkCurrentHighOutputPower

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.4.2.1.8

The highest optical power monitored at the output
during the current 15-minute interval.

jnxoptIfOMSnSinkCurrentLowerOutputPowerThreshold

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.4.2.1.9

The lower limit threshold on output power. If
jnxoptIfOMSnSinkCurrentOutputPower drops to this value
or below, a Threshold Crossing Alert (TCA) should be sent.

0.1 dbmSNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.4.2.1.10

jnxoptIfOMSnSinkCurrentUpperOutputPowerThreshold

The upper limit threshold on output power. If
jnxoptIfOMSnSinkCurrentOutputPower reaches or exceeds
this value, a Threshold Crossing Alert (TCA) should be sent.

0.1 dbmSNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.4.2.1.11

jnxoptIfOMSnSinkIntervalTable

table

.1.3.6.1.4.1.2636.3.73.1.1.4.3 · 1 row entry · 8 columns

Open in standard view

Uses the juniper variant from /opt/observium/mibs/juniper.

Command help

Walk jnxoptIfOMSnSinkIntervalTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'JNX-OPT-IF-MIB' -M '/opt/observium/mibs/juniper:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'JNX-OPT-IF-MIB::jnxoptIfOMSnSinkIntervalTable'

A table of historical OMSn sink performance monitoring 
information.

jnxoptIfOMSnSinkIntervalEntry row .1.3.6.1.4.1.2636.3.73.1.1.4.3.1

A conceptual row that contains OMSn sink performance
monitoring information of an interface during a particular
historical interval.

Indexes

IF-MIBifIndex jnxoptIfOMSnSinkIntervalNumber

Column Syntax OID

jnxoptIfOMSnSinkIntervalNumber

Uniquely identifies the interval.

jnxoptIfOMSnSinkIntervalSuspectedFlag

Type Constraints:
range: 1..96

.1.3.6.1.4.1.2636.3.73.1.1.4.3.1.1

If true, the data in this entry may be unreliable.

jnxoptIfOMSnSinkIntervalLastAggregatedInputPower

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2636.3.73.1.1.4.3.1.2

The last aggregated optical power of all the DWDM input
channels during the interval.

jnxoptIfOMSnSinkIntervalLowAggregatedInputPower

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.4.3.1.3

The lowest aggregated optical power of all the DWDM input
channels during the interval.

jnxoptIfOMSnSinkIntervalHighAggregatedInputPower

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.4.3.1.4

The highest aggregated optical power of all the DWDM input
channels during the interval.

jnxoptIfOMSnSinkIntervalLastOutputPower

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.4.3.1.5

The last optical power at the output
during the interval.

jnxoptIfOMSnSinkIntervalLowOutputPower

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.4.3.1.6

The lowest optical power at the output
during the interval.

jnxoptIfOMSnSinkIntervalHighOutputPower

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.4.3.1.7

The highest optical power at the output
during the interval.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.4.3.1.8

jnxoptIfOMSnSinkCurDayTable

table

.1.3.6.1.4.1.2636.3.73.1.1.4.4 · 1 row entry · 5 columns

Open in standard view

Uses the juniper variant from /opt/observium/mibs/juniper.

Command help

Walk jnxoptIfOMSnSinkCurDayTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'JNX-OPT-IF-MIB' -M '/opt/observium/mibs/juniper:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'JNX-OPT-IF-MIB::jnxoptIfOMSnSinkCurDayTable'

A table of OMSn sink performance monitoring information for 
the current 24-hour interval.

jnxoptIfOMSnSinkCurDayEntry row .1.3.6.1.4.1.2636.3.73.1.1.4.4.1

A conceptual row that contains OMSn sink performance
monitoring information of an interface for the current
24-hour interval.

Indexes

jnxoptIfOMSnSinkCurDaySuspectedFlag

Column Syntax OID

If true, the data in this entry may be unreliable.

jnxoptIfOMSnSinkCurDayLowAggregatedInputPower

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2636.3.73.1.1.4.4.1.1

The lowest aggregated optical power of all the DWDM input
channels during the current 24-hour interval.

jnxoptIfOMSnSinkCurDayHighAggregatedInputPower

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.4.4.1.2

The highest aggregated optical power of all the DWDM input
channels during the current 24-hour interval.

jnxoptIfOMSnSinkCurDayLowOutputPower

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.4.4.1.3

The lowest optical power at the output
during the current 24-hour interval.

jnxoptIfOMSnSinkCurDayHighOutputPower

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.4.4.1.4

The highest optical power at the output
during the current 24-hour interval.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.4.4.1.5

jnxoptIfOMSnSinkPrevDayTable

table

.1.3.6.1.4.1.2636.3.73.1.1.4.5 · 1 row entry · 7 columns

Open in standard view

Uses the juniper variant from /opt/observium/mibs/juniper.

Command help

Walk jnxoptIfOMSnSinkPrevDayTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'JNX-OPT-IF-MIB' -M '/opt/observium/mibs/juniper:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'JNX-OPT-IF-MIB::jnxoptIfOMSnSinkPrevDayTable'

A table of OMSn sink performance monitoring information for 
the previous 24-hour interval.

jnxoptIfOMSnSinkPrevDayEntry row .1.3.6.1.4.1.2636.3.73.1.1.4.5.1

A conceptual row that contains OMSn sink performance
monitoring information of an interface for the previous
24-hour interval.

Indexes

jnxoptIfOMSnSinkPrevDaySuspectedFlag

Column Syntax OID

If true, the data in this entry may be unreliable.

jnxoptIfOMSnSinkPrevDayLastAggregatedInputPower

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2636.3.73.1.1.4.5.1.1

The last aggregated optical power of all the DWDM input
channels during the previous 24-hour interval.

jnxoptIfOMSnSinkPrevDayLowAggregatedInputPower

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.4.5.1.2

The lowest aggregated optical power of all the DWDM input
channels during the previous 24-hour interval.

jnxoptIfOMSnSinkPrevDayHighAggregatedInputPower

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.4.5.1.3

The highest aggregated optical power of all the DWDM input
channels during the previous 24-hour interval.

jnxoptIfOMSnSinkPrevDayLastOutputPower

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.4.5.1.4

The last optical power at the output
during the previous 24-hour interval.

jnxoptIfOMSnSinkPrevDayLowOutputPower

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.4.5.1.5

The lowest optical power at the output
during the previous 24-hour interval.

jnxoptIfOMSnSinkPrevDayHighOutputPower

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.4.5.1.6

The highest optical power at the output
during the previous 24-hour interval.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.4.5.1.7

jnxoptIfOMSnSrcCurrentTable

table

.1.3.6.1.4.1.2636.3.73.1.1.4.6 · 1 row entry · 11 columns

Open in standard view

Uses the juniper variant from /opt/observium/mibs/juniper.

Command help

Walk jnxoptIfOMSnSrcCurrentTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'JNX-OPT-IF-MIB' -M '/opt/observium/mibs/juniper:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'JNX-OPT-IF-MIB::jnxoptIfOMSnSrcCurrentTable'

A table of OMSn source performance monitoring information for 
the current 15-minute interval.

jnxoptIfOMSnSrcCurrentEntry row .1.3.6.1.4.1.2636.3.73.1.1.4.6.1

A conceptual row that contains OMSn source performance
monitoring information of an interface for the current
15-minute interval.

Indexes

jnxoptIfOMSnSrcCurrentSuspectedFlag

Column Syntax OID

If true, the data in this entry may be unreliable.

jnxoptIfOMSnSrcCurrentOutputPower

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2636.3.73.1.1.4.6.1.1

The optical power monitored at the output.

jnxoptIfOMSnSrcCurrentLowOutputPower

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.4.6.1.2

The lowest optical power monitored at the output during the
current 15-minute interval.

jnxoptIfOMSnSrcCurrentHighOutputPower

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.4.6.1.3

The highest optical power monitored at the output during the
current 15-minute interval.

jnxoptIfOMSnSrcCurrentLowerOutputPowerThreshold

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.4.6.1.4

The lower limit threshold on output power. If
jnxoptIfOMSnSrcCurrentOutputPower drops to this value or below,
a Threshold Crossing Alert (TCA) should be sent.

0.1 dbmSNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.4.6.1.5

jnxoptIfOMSnSrcCurrentUpperOutputPowerThreshold

The upper limit threshold on output power. If
jnxoptIfOMSnSrcCurrentOutputPower reaches or exceeds this value,
a Threshold Crossing Alert (TCA) should be sent.

0.1 dbmSNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.4.6.1.6

jnxoptIfOMSnSrcCurrentAggregatedInputPower

The aggregated optical power at the input.

jnxoptIfOMSnSrcCurrentLowAggregatedInputPower

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.4.6.1.7

The lowest aggregated optical power at the input
during the current 15-minute interval.

jnxoptIfOMSnSrcCurrentHighAggregatedInputPower

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.4.6.1.8

The highest aggregated optical power at the input
during the current 15-minute interval.

jnxoptIfOMSnSrcCurrentLowerInputPowerThreshold

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.4.6.1.9

The lower limit threshold on aggregated input power. If
jnxoptIfOMSnSrcCurrentAggregatedInputPower drops to this value
or below, a Threshold Crossing Alert (TCA) should be sent.

0.1 dbmSNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.4.6.1.10

jnxoptIfOMSnSrcCurrentUpperInputPowerThreshold

The upper limit threshold on aggregated input power. If
jnxoptIfOMSnSrcCurrentAggregatedInputPower reaches or exceeds
this value, a Threshold Crossing Alert (TCA) should be sent.

0.1 dbmSNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.4.6.1.11

jnxoptIfOMSnSrcIntervalTable

table

.1.3.6.1.4.1.2636.3.73.1.1.4.7 · 1 row entry · 8 columns

Open in standard view

Uses the juniper variant from /opt/observium/mibs/juniper.

Command help

Walk jnxoptIfOMSnSrcIntervalTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'JNX-OPT-IF-MIB' -M '/opt/observium/mibs/juniper:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'JNX-OPT-IF-MIB::jnxoptIfOMSnSrcIntervalTable'

A table of historical OMSn source performance monitoring 
information.

jnxoptIfOMSnSrcIntervalEntry row .1.3.6.1.4.1.2636.3.73.1.1.4.7.1

A conceptual row that contains OMSn source performance
monitoring information of an interface during a particular
historical interval.

Indexes

IF-MIBifIndex jnxoptIfOMSnSrcIntervalNumber

Column Syntax OID

jnxoptIfOMSnSrcIntervalNumber

Uniquely identifies the interval.

jnxoptIfOMSnSrcIntervalSuspectedFlag

Type Constraints:
range: 1..96

.1.3.6.1.4.1.2636.3.73.1.1.4.7.1.1

If true, the data in this entry may be unreliable.

jnxoptIfOMSnSrcIntervalLastOutputPower

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2636.3.73.1.1.4.7.1.2

The last optical power monitored at the output during the
interval.

jnxoptIfOMSnSrcIntervalLowOutputPower

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.4.7.1.3

The lowest optical power monitored at the output during the
interval.

jnxoptIfOMSnSrcIntervalHighOutputPower

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.4.7.1.4

The highest optical power monitored at the output during the
interval.

jnxoptIfOMSnSrcIntervalLastAggregatedInputPower

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.4.7.1.5

The last aggregated optical power at the input
during the interval.

jnxoptIfOMSnSrcIntervalLowAggregatedInputPower

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.4.7.1.6

The lowest aggregated optical power at the input
during the interval.

jnxoptIfOMSnSrcIntervalHighAggregatedInputPower

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.4.7.1.7

The highest aggregated optical power at the input
during the interval.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.4.7.1.8

jnxoptIfOMSnSrcCurDayTable

table

.1.3.6.1.4.1.2636.3.73.1.1.4.8 · 1 row entry · 5 columns

Open in standard view

Uses the juniper variant from /opt/observium/mibs/juniper.

Command help

Walk jnxoptIfOMSnSrcCurDayTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'JNX-OPT-IF-MIB' -M '/opt/observium/mibs/juniper:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'JNX-OPT-IF-MIB::jnxoptIfOMSnSrcCurDayTable'

A table of OMSn source performance monitoring information for 
the current 24-hour interval.

jnxoptIfOMSnSrcCurDayEntry row .1.3.6.1.4.1.2636.3.73.1.1.4.8.1

A conceptual row that contains OMSn source performance
monitoring information of an interface for the current
24-hour interval.

Indexes

jnxoptIfOMSnSrcCurDaySuspectedFlag

Column Syntax OID

If true, the data in this entry may be unreliable.

jnxoptIfOMSnSrcCurDayLowOutputPower

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2636.3.73.1.1.4.8.1.1

The lowest optical power monitored at the output during the
current 24-hour interval.

jnxoptIfOMSnSrcCurDayHighOutputPower

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.4.8.1.2

The highest optical power monitored at the output during the
current 24-hour interval.

jnxoptIfOMSnSrcCurDayLowAggregatedInputPower

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.4.8.1.3

The lowest aggregated optical power at the input
during the current 24-hour interval.

jnxoptIfOMSnSrcCurDayHighAggregatedInputPower

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.4.8.1.4

The highest aggregated optical power at the input
during the current 24-hour interval.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.4.8.1.5

jnxoptIfOMSnSrcPrevDayTable

table

.1.3.6.1.4.1.2636.3.73.1.1.4.9 · 1 row entry · 7 columns

Open in standard view

Uses the juniper variant from /opt/observium/mibs/juniper.

Command help

Walk jnxoptIfOMSnSrcPrevDayTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'JNX-OPT-IF-MIB' -M '/opt/observium/mibs/juniper:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'JNX-OPT-IF-MIB::jnxoptIfOMSnSrcPrevDayTable'

A table of OMSn source performance monitoring information for 
the previous 24-hour interval.

jnxoptIfOMSnSrcPrevDayEntry row .1.3.6.1.4.1.2636.3.73.1.1.4.9.1

A conceptual row that contains OMSn source performance
monitoring information of an interface for the previous
24-hour interval.

Indexes

jnxoptIfOMSnSrcPrevDaySuspectedFlag

Column Syntax OID

If true, the data in this entry may be unreliable.

jnxoptIfOMSnSrcPrevDayLastOutputPower

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2636.3.73.1.1.4.9.1.1

The last optical power monitored at the output during the
previous 24-hour interval.

jnxoptIfOMSnSrcPrevDayLowOutputPower

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.4.9.1.2

The lowest optical power monitored at the output during the
previous 24-hour interval.

jnxoptIfOMSnSrcPrevDayHighOutputPower

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.4.9.1.3

The highest optical power monitored at the output during the
previous 24-hour interval.

jnxoptIfOMSnSrcPrevDayLastAggregatedInputPower

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.4.9.1.4

The last aggregated optical power at the input during the
previous 24-hour interval.

jnxoptIfOMSnSrcPrevDayLowAggregatedInputPower

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.4.9.1.5

The lowest aggregated optical power at the input during the
previous 24-hour interval.

jnxoptIfOMSnSrcPrevDayHighAggregatedInputPower

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.4.9.1.6

The highest aggregated optical power at the input during the
previous 24-hour interval.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.4.9.1.7

jnxoptIfOChGroupConfigTable

table

.1.3.6.1.4.1.2636.3.73.1.1.5.1 · 1 row entry · 1 columns

Open in standard view

Uses the juniper variant from /opt/observium/mibs/juniper.

Command help

Walk jnxoptIfOChGroupConfigTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'JNX-OPT-IF-MIB' -M '/opt/observium/mibs/juniper:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'JNX-OPT-IF-MIB::jnxoptIfOChGroupConfigTable'

A table of OChGroup configuration information.

jnxoptIfOChGroupConfigEntry row .1.3.6.1.4.1.2636.3.73.1.1.5.1.1

A conceptual row that contains OChGroup configuration
information of an interface.

Indexes

jnxoptIfOChGroupDirectionality

Column Syntax OID

Indicates the directionality of the entity.

Type Values:

1	sink
2	source
3	bidirectional

.1.3.6.1.4.1.2636.3.73.1.1.5.1.1.1

jnxoptIfOChGroupSinkCurrentTable

table

.1.3.6.1.4.1.2636.3.73.1.1.5.2 · 1 row entry · 11 columns

Open in standard view

Uses the juniper variant from /opt/observium/mibs/juniper.

Command help

Walk jnxoptIfOChGroupSinkCurrentTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'JNX-OPT-IF-MIB' -M '/opt/observium/mibs/juniper:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'JNX-OPT-IF-MIB::jnxoptIfOChGroupSinkCurrentTable'

A table of OChGroup sink performance monitoring information for 
the current 15-minute interval.

jnxoptIfOChGroupSinkCurrentEntry row .1.3.6.1.4.1.2636.3.73.1.1.5.2.1

A conceptual row that contains OChGroup sink performance
monitoring information of an interface for the current
15-minute interval.

Indexes

jnxoptIfOChGroupSinkCurrentSuspectedFlag

Column Syntax OID

If true, the data in this entry may be unreliable.

jnxoptIfOChGroupSinkCurrentAggregatedInputPower

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2636.3.73.1.1.5.2.1.1

The aggregated optical power of all the DWDM input
channels in the OChGroup.

jnxoptIfOChGroupSinkCurrentLowAggregatedInputPower

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.5.2.1.2

The lowest aggregated optical power of all the DWDM input
channels in the OChGroup during the current 15-minute interval.

jnxoptIfOChGroupSinkCurrentHighAggregatedInputPower

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.5.2.1.3

The highest aggregated optical power of all the DWDM input
channels in the OChGroup during the current 15-minute interval.

jnxoptIfOChGroupSinkCurrentLowerInputPowerThreshold

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.5.2.1.4

The lower limit threshold on aggregated input power. If
jnxoptIfOChGroupSinkCurrentAggregatedInputPower drops to this value
or below, a Threshold Crossing Alert (TCA) should be sent.

0.1 dbmSNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.5.2.1.5

jnxoptIfOChGroupSinkCurrentUpperInputPowerThreshold

The upper limit threshold on aggregated input power. If
jnxoptIfOChGroupSinkCurrentAggregatedInputPower reaches or exceeds
this value, a Threshold Crossing Alert (TCA) should be sent.

0.1 dbmSNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.5.2.1.6

jnxoptIfOChGroupSinkCurrentOutputPower

The optical power monitored at the output
in the OChGroup.

jnxoptIfOChGroupSinkCurrentLowOutputPower

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.5.2.1.7

The lowest optical power monitored at the output
in the OChGroup during the current 15-minute interval.

jnxoptIfOChGroupSinkCurrentHighOutputPower

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.5.2.1.8

The highest optical power monitored at the output
in the OChGroup during the current 15-minute interval.

jnxoptIfOChGroupSinkCurrentLowerOutputPowerThreshold

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.5.2.1.9

The lower limit threshold on the output power. If
jnxoptIfOChGroupSinkCurrentOutputPower drops to this value
or below, a Threshold Crossing Alert (TCA) should be sent.

0.1 dbmSNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.5.2.1.10

jnxoptIfOChGroupSinkCurrentUpperOutputPowerThreshold

The upper limit threshold on the output power. If
jnxoptIfOChGroupSinkCurrentOutputPower reaches or exceeds
this value, a Threshold Crossing Alert (TCA) should be sent.

0.1 dbmSNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.5.2.1.11

jnxoptIfOChGroupSinkIntervalTable

table

.1.3.6.1.4.1.2636.3.73.1.1.5.3 · 1 row entry · 8 columns

Open in standard view

Uses the juniper variant from /opt/observium/mibs/juniper.

Command help

Walk jnxoptIfOChGroupSinkIntervalTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'JNX-OPT-IF-MIB' -M '/opt/observium/mibs/juniper:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'JNX-OPT-IF-MIB::jnxoptIfOChGroupSinkIntervalTable'

A table of historical OChGroup sink performance monitoring 
information.

jnxoptIfOChGroupSinkIntervalEntry row .1.3.6.1.4.1.2636.3.73.1.1.5.3.1

A conceptual row that contains OChGroup sink performance
monitoring information of an interface during a particular
historical interval.

Indexes

IF-MIBifIndex jnxoptIfOChGroupSinkIntervalNumber

Column Syntax OID

jnxoptIfOChGroupSinkIntervalNumber

Uniquely identifies the interval.

jnxoptIfOChGroupSinkIntervalSuspectedFlag

Type Constraints:
range: 1..96

.1.3.6.1.4.1.2636.3.73.1.1.5.3.1.1

If true, the data in this entry may be unreliable.

jnxoptIfOChGroupSinkIntervalLastAggregatedInputPower

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2636.3.73.1.1.5.3.1.2

The last aggregated optical power of all the DWDM input
channels in the OChGroup during the interval.

jnxoptIfOChGroupSinkIntervalLowAggregatedInputPower

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.5.3.1.3

The lowest aggregated optical power of all the DWDM input
channels in the OChGroup during the interval.

jnxoptIfOChGroupSinkIntervalHighAggregatedInputPower

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.5.3.1.4

The highest aggregated optical power of all the DWDM input
channels in the OChGroup during the interval.

jnxoptIfOChGroupSinkIntervalLastOutputPower

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.5.3.1.5

The last optical power monitored at the output
in the OChGroup during the interval.

jnxoptIfOChGroupSinkIntervalLowOutputPower

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.5.3.1.6

The lowest optical power monitored at the output
in the OChGroup during the interval.

jnxoptIfOChGroupSinkIntervalHighOutputPower

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.5.3.1.7

The highest optical power monitored at the output
in the OChGroup during the interval.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.5.3.1.8

jnxoptIfOChGroupSinkCurDayTable

table

.1.3.6.1.4.1.2636.3.73.1.1.5.4 · 1 row entry · 5 columns

Open in standard view

Uses the juniper variant from /opt/observium/mibs/juniper.

Command help

Walk jnxoptIfOChGroupSinkCurDayTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'JNX-OPT-IF-MIB' -M '/opt/observium/mibs/juniper:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'JNX-OPT-IF-MIB::jnxoptIfOChGroupSinkCurDayTable'

A table of OChGroup sink performance monitoring information for 
the current 24-hour interval.

jnxoptIfOChGroupSinkCurDayEntry row .1.3.6.1.4.1.2636.3.73.1.1.5.4.1

A conceptual row that contains OChGroup sink performance
monitoring information of an interface for the current
24-hour interval.

Indexes

jnxoptIfOChGroupSinkCurDaySuspectedFlag

Column Syntax OID

If true, the data in this entry may be unreliable.

jnxoptIfOChGroupSinkCurDayLowAggregatedInputPower

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2636.3.73.1.1.5.4.1.1

The lowest aggregated optical power of all the DWDM input
channels in the OChGroup during the current 24-hour interval.

jnxoptIfOChGroupSinkCurDayHighAggregatedInputPower

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.5.4.1.2

The highest aggregated optical power of all the DWDM input
channels in the OChGroup during the current 24-hour interval.

jnxoptIfOChGroupSinkCurDayLowOutputPower

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.5.4.1.3

The lowest optical power monitored at the output
in the OChGroup during the current 24-hour interval.

jnxoptIfOChGroupSinkCurDayHighOutputPower

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.5.4.1.4

The highest optical power monitored at the output
in the OChGroup during the current 24-hour interval.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.5.4.1.5

jnxoptIfOChGroupSinkPrevDayTable

table

.1.3.6.1.4.1.2636.3.73.1.1.5.5 · 1 row entry · 7 columns

Open in standard view

Uses the juniper variant from /opt/observium/mibs/juniper.

Command help

Walk jnxoptIfOChGroupSinkPrevDayTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'JNX-OPT-IF-MIB' -M '/opt/observium/mibs/juniper:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'JNX-OPT-IF-MIB::jnxoptIfOChGroupSinkPrevDayTable'

A table of OChGroup sink performance monitoring information for 
the previous 24-hour interval.

jnxoptIfOChGroupSinkPrevDayEntry row .1.3.6.1.4.1.2636.3.73.1.1.5.5.1

A conceptual row that contains OChGroup sink performance
monitoring information of an interface for the previous
24-hour interval.

Indexes

jnxoptIfOChGroupSinkPrevDaySuspectedFlag

Column Syntax OID

If true, the data in this entry may be unreliable.

jnxoptIfOChGroupSinkPrevDayLastAggregatedInputPower

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2636.3.73.1.1.5.5.1.1

The last aggregated optical power of all the DWDM input
channels in the OChGroup during the previous 24-hour interval.

jnxoptIfOChGroupSinkPrevDayLowAggregatedInputPower

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.5.5.1.2

The lowest aggregated optical power of all the DWDM input
channels in the OChGroup during the previous 24-hour interval.

jnxoptIfOChGroupSinkPrevDayHighAggregatedInputPower

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.5.5.1.3

The highest aggregated optical power of all the DWDM input
channels in the OChGroup during the previous 24-hour interval.

jnxoptIfOChGroupSinkPrevDayLastOutputPower

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.5.5.1.4

The last optical power monitored at the output
in the OChGroup during the previous 24-hour interval.

jnxoptIfOChGroupSinkPrevDayLowOutputPower

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.5.5.1.5

The lowest optical power monitored at the output
in the OChGroup during the previous 24-hour interval.

jnxoptIfOChGroupSinkPrevDayHighOutputPower

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.5.5.1.6

The highest optical power monitored at the output
in the OChGroup during the previous 24-hour interval.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.5.5.1.7

jnxoptIfOChGroupSrcCurrentTable

table

.1.3.6.1.4.1.2636.3.73.1.1.5.6 · 1 row entry · 11 columns

Open in standard view

Uses the juniper variant from /opt/observium/mibs/juniper.

Command help

Walk jnxoptIfOChGroupSrcCurrentTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'JNX-OPT-IF-MIB' -M '/opt/observium/mibs/juniper:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'JNX-OPT-IF-MIB::jnxoptIfOChGroupSrcCurrentTable'

A table of OChGroup source performance monitoring information for 
the current 15-minute interval.

jnxoptIfOChGroupSrcCurrentEntry row .1.3.6.1.4.1.2636.3.73.1.1.5.6.1

A conceptual row that contains OChGroup source performance
monitoring information of an interface for the current
15-minute interval.

Indexes

jnxoptIfOChGroupSrcCurrentSuspectedFlag

Column Syntax OID

If true, the data in this entry may be unreliable.

jnxoptIfOChGroupSrcCurrentOutputPower

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2636.3.73.1.1.5.6.1.1

The optical power monitored at the output.

jnxoptIfOChGroupSrcCurrentLowOutputPower

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.5.6.1.2

The lowest optical power monitored at the output during the
current 15-minute interval.

jnxoptIfOChGroupSrcCurrentHighOutputPower

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.5.6.1.3

The highest optical power monitored at the output during the
current 15-minute interval.

jnxoptIfOChGroupSrcCurrentLowerOutputPowerThreshold

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.5.6.1.4

The lower limit threshold on output power. If
jnxoptIfOChGroupSrcCurrentOutputPower drops to this value or below,
a Threshold Crossing Alert (TCA) should be sent.

0.1 dbmSNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.5.6.1.5

jnxoptIfOChGroupSrcCurrentUpperOutputPowerThreshold

The upper limit threshold on output power. If
jnxoptIfOChGroupSrcCurrentOutputPower reaches or exceeds this value,
a Threshold Crossing Alert (TCA) should be sent.

0.1 dbmSNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.5.6.1.6

jnxoptIfOChGroupSrcCurrentAggregatedInputPower

The aggregated optical power monitored at the input.

jnxoptIfOChGroupSrcCurrentLowAggregatedInputPower

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.5.6.1.7

The lowest aggregated optical power monitored at the input
during the current 15-minute interval.

jnxoptIfOChGroupSrcCurrentHighAggregatedInputPower

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.5.6.1.8

The highest aggregated optical power monitored at the input
during the current 15-minute interval.

jnxoptIfOChGroupSrcCurrentLowerInputPowerThreshold

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.5.6.1.9

The lower limit threshold on input power. If
jnxoptIfOChGroupSrcCurrentAggregatedInputPower drops to this value
or below, a Threshold Crossing Alert (TCA) should be sent.

0.1 dbmSNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.5.6.1.10

jnxoptIfOChGroupSrcCurrentUpperInputPowerThreshold

The upper limit threshold on input power. If
jnxoptIfOChGroupSrcCurrentAggregatedInputPower reaches or exceeds
this value, a Threshold Crossing Alert (TCA) should be sent.

0.1 dbmSNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.5.6.1.11

jnxoptIfOChGroupSrcIntervalTable

table

.1.3.6.1.4.1.2636.3.73.1.1.5.7 · 1 row entry · 8 columns

Open in standard view

Uses the juniper variant from /opt/observium/mibs/juniper.

Command help

Walk jnxoptIfOChGroupSrcIntervalTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'JNX-OPT-IF-MIB' -M '/opt/observium/mibs/juniper:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'JNX-OPT-IF-MIB::jnxoptIfOChGroupSrcIntervalTable'

A table of historical OChGroup source performance monitoring 
information.

jnxoptIfOChGroupSrcIntervalEntry row .1.3.6.1.4.1.2636.3.73.1.1.5.7.1

A conceptual row that contains OChGroup source performance
monitoring information of an interface during a particular
historical interval.

Indexes

IF-MIBifIndex jnxoptIfOChGroupSrcIntervalNumber

Column Syntax OID

jnxoptIfOChGroupSrcIntervalNumber

Uniquely identifies the interval.

jnxoptIfOChGroupSrcIntervalSuspectedFlag

Type Constraints:
range: 1..96

.1.3.6.1.4.1.2636.3.73.1.1.5.7.1.1

If true, the data in this entry may be unreliable.

jnxoptIfOChGroupSrcIntervalLastOutputPower

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2636.3.73.1.1.5.7.1.2

The last optical power monitored at the output during the
interval.

jnxoptIfOChGroupSrcIntervalLowOutputPower

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.5.7.1.3

The lowest optical power monitored at the output during the
interval.

jnxoptIfOChGroupSrcIntervalHighOutputPower

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.5.7.1.4

The highest optical power monitored at the output during the
interval.

jnxoptIfOChGroupSrcIntervalLastAggregatedInputPower

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.5.7.1.5

The last aggregated optical power monitored at the input
during the interval.

jnxoptIfOChGroupSrcIntervalLowAggregatedInputPower

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.5.7.1.6

The lowest aggregated optical power monitored at the input
during the interval.

jnxoptIfOChGroupSrcIntervalHighAggregatedInputPower

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.5.7.1.7

The highest aggregated optical power monitored at the input
during the interval.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.5.7.1.8

jnxoptIfOChGroupSrcCurDayTable

table

.1.3.6.1.4.1.2636.3.73.1.1.5.8 · 1 row entry · 5 columns

Open in standard view

Uses the juniper variant from /opt/observium/mibs/juniper.

Command help

Walk jnxoptIfOChGroupSrcCurDayTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'JNX-OPT-IF-MIB' -M '/opt/observium/mibs/juniper:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'JNX-OPT-IF-MIB::jnxoptIfOChGroupSrcCurDayTable'

A table of OChGroup source performance monitoring information for 
the current 24-hour interval.

jnxoptIfOChGroupSrcCurDayEntry row .1.3.6.1.4.1.2636.3.73.1.1.5.8.1

A conceptual row that contains OChGroup source performance
monitoring information of an interface for the current
24-hour interval.

Indexes

jnxoptIfOChGroupSrcCurDaySuspectedFlag

Column Syntax OID

If true, the data in this entry may be unreliable.

jnxoptIfOChGroupSrcCurDayLowOutputPower

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2636.3.73.1.1.5.8.1.1

The lowest optical power monitored at the output during the
current 24-hour interval.

jnxoptIfOChGroupSrcCurDayHighOutputPower

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.5.8.1.2

The highest optical power monitored at the output during the
current 24-hour interval.

jnxoptIfOChGroupSrcCurDayLowAggregatedInputPower

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.5.8.1.3

The lowest aggregated optical power monitored at the input
during the current 24-hour interval.

jnxoptIfOChGroupSrcCurDayHighAggregatedInputPower

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.5.8.1.4

The highest aggregated optical power monitored at the input
during the current 24-hour interval.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.5.8.1.5

jnxoptIfOChGroupSrcPrevDayTable

table

.1.3.6.1.4.1.2636.3.73.1.1.5.9 · 1 row entry · 7 columns

Open in standard view

Uses the juniper variant from /opt/observium/mibs/juniper.

Command help

Walk jnxoptIfOChGroupSrcPrevDayTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'JNX-OPT-IF-MIB' -M '/opt/observium/mibs/juniper:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'JNX-OPT-IF-MIB::jnxoptIfOChGroupSrcPrevDayTable'

A table of OChGroup source performance monitoring information for 
the previous 24-hour interval.

jnxoptIfOChGroupSrcPrevDayEntry row .1.3.6.1.4.1.2636.3.73.1.1.5.9.1

A conceptual row that contains OChGroup source performance
monitoring information of an interface for the previous
24-hour interval.

Indexes

jnxoptIfOChGroupSrcPrevDaySuspectedFlag

Column Syntax OID

If true, the data in this entry may be unreliable.

jnxoptIfOChGroupSrcPrevDayLastOutputPower

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2636.3.73.1.1.5.9.1.1

The last optical power monitored at the output during the
previous 24-hour interval.

jnxoptIfOChGroupSrcPrevDayLowOutputPower

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.5.9.1.2

The lowest optical power monitored at the output during the
previous 24-hour interval.

jnxoptIfOChGroupSrcPrevDayHighOutputPower

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.5.9.1.3

The highest optical power monitored at the output during the
previous 24-hour interval.

jnxoptIfOChGroupSrcPrevDayLastAggregatedInputPower

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.5.9.1.4

The last aggregated optical power monitored at the input
during the previous 24-hour interval.

jnxoptIfOChGroupSrcPrevDayLowAggregatedInputPower

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.5.9.1.5

The lowest aggregated optical power monitored at the input
during the previous 24-hour interval.

jnxoptIfOChGroupSrcPrevDayHighAggregatedInputPower

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.5.9.1.6

The highest aggregated optical power monitored at the input
during the previous 24-hour interval.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.5.9.1.7

jnxoptIfOChConfigTable

table

.1.3.6.1.4.1.2636.3.73.1.1.6.1 · 1 row entry · 2 columns

Open in standard view

Uses the juniper variant from /opt/observium/mibs/juniper.

Command help

Walk jnxoptIfOChConfigTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'JNX-OPT-IF-MIB' -M '/opt/observium/mibs/juniper:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'JNX-OPT-IF-MIB::jnxoptIfOChConfigTable'

A table of OCh configuration information.

jnxoptIfOChConfigEntry row .1.3.6.1.4.1.2636.3.73.1.1.6.1.1

A conceptual row that contains OCh configuration
information of an interface.

Indexes

jnxoptIfOChDirectionality

Column Syntax OID

Indicates the directionality of the entity.

Type Values:

1	sink
2	source
3	bidirectional

.1.3.6.1.4.1.2636.3.73.1.1.6.1.1.1

jnxoptIfOChCurrentStatus

Indicates the defect condition of the entity, if any.
This object is applicable when jnxoptIfOChDirectionality
has the value sink(1) or bidirectional(3).
In full-capability systems the bit position los(1) is not used…

Bits

Enumerated Values:

0	losP
1	los
2	oci
3	ssfP
4	ssfO
5	ssf

.1.3.6.1.4.1.2636.3.73.1.1.6.1.1.2

jnxoptIfOChSinkCurrentTable

table

.1.3.6.1.4.1.2636.3.73.1.1.6.2 · 1 row entry · 6 columns

Open in standard view

Uses the juniper variant from /opt/observium/mibs/juniper.

Command help

Walk jnxoptIfOChSinkCurrentTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'JNX-OPT-IF-MIB' -M '/opt/observium/mibs/juniper:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'JNX-OPT-IF-MIB::jnxoptIfOChSinkCurrentTable'

A table of OCh sink performance monitoring information for 
the current 15-minute interval.

jnxoptIfOChSinkCurrentEntry row .1.3.6.1.4.1.2636.3.73.1.1.6.2.1

A conceptual row that contains OCh sink performance
monitoring information for an interface for the current
15-minute interval.

Indexes

jnxoptIfOChSinkCurrentSuspectedFlag

Column Syntax OID

If true, the data in this entry may be unreliable.

jnxoptIfOChSinkCurrentInputPower

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2636.3.73.1.1.6.2.1.1

The optical power monitored at the input.

jnxoptIfOChSinkCurrentLowInputPower

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.6.2.1.2

The lowest optical power monitored at the input during the
current 15-minute interval.

jnxoptIfOChSinkCurrentHighInputPower

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.6.2.1.3

The highest optical power monitored at the input during the
current 15-minute interval.

jnxoptIfOChSinkCurrentLowerInputPowerThreshold

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.6.2.1.4

The lower limit threshold on input power. If
jnxoptIfOChSinkCurrentInputPower drops to this value or below,
a Threshold Crossing Alert (TCA) should be sent.

0.1 dbmSNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.6.2.1.5

jnxoptIfOChSinkCurrentUpperInputPowerThreshold

The upper limit threshold on input power. If
jnxoptIfOChSinkCurrentInputPower reaches or exceeds this value,
a Threshold Crossing Alert (TCA) should be sent.

0.1 dbmSNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.6.2.1.6

jnxoptIfOChSinkIntervalTable

table

.1.3.6.1.4.1.2636.3.73.1.1.6.3 · 1 row entry · 5 columns

Open in standard view

Uses the juniper variant from /opt/observium/mibs/juniper.

Command help

Walk jnxoptIfOChSinkIntervalTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'JNX-OPT-IF-MIB' -M '/opt/observium/mibs/juniper:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'JNX-OPT-IF-MIB::jnxoptIfOChSinkIntervalTable'

A table of historical OCh sink performance monitoring 
information.

jnxoptIfOChSinkIntervalEntry row .1.3.6.1.4.1.2636.3.73.1.1.6.3.1

A conceptual row that contains OCh sink performance
monitoring information of an interface during a particular
historical interval.

Indexes

IF-MIBifIndex jnxoptIfOChSinkIntervalNumber

Column Syntax OID

jnxoptIfOChSinkIntervalNumber

Uniquely identifies the interval.

jnxoptIfOChSinkIntervalSuspectedFlag

Type Constraints:
range: 1..96

.1.3.6.1.4.1.2636.3.73.1.1.6.3.1.1

If true, the data in this entry may be unreliable.

jnxoptIfOChSinkIntervalLastInputPower

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2636.3.73.1.1.6.3.1.2

The last optical power monitored at the input during the
interval.

jnxoptIfOChSinkIntervalLowInputPower

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.6.3.1.3

The lowest optical power monitored at the input during the
interval.

jnxoptIfOChSinkIntervalHighInputPower

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.6.3.1.4

The highest optical power monitored at the input during the
interval.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.6.3.1.5

jnxoptIfOChSinkCurDayTable

table

.1.3.6.1.4.1.2636.3.73.1.1.6.4 · 1 row entry · 3 columns

Open in standard view

Uses the juniper variant from /opt/observium/mibs/juniper.

Command help

Walk jnxoptIfOChSinkCurDayTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'JNX-OPT-IF-MIB' -M '/opt/observium/mibs/juniper:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'JNX-OPT-IF-MIB::jnxoptIfOChSinkCurDayTable'

A table of OCh sink performance monitoring information for 
the current 24-hour interval.

jnxoptIfOChSinkCurDayEntry row .1.3.6.1.4.1.2636.3.73.1.1.6.4.1

A conceptual row that contains OCh sink performance
monitoring information of an interface for the current
24-hour interval.

Indexes

jnxoptIfOChSinkCurDaySuspectedFlag

Column Syntax OID

If true, the data in this entry may be unreliable.

jnxoptIfOChSinkCurDayLowInputPower

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2636.3.73.1.1.6.4.1.1

The lowest optical power monitored at the input during the
current 24-hour interval.

jnxoptIfOChSinkCurDayHighInputPower

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.6.4.1.2

The highest optical power monitored at the input during the
current 24-hour interval.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.6.4.1.3

jnxoptIfOChSinkPrevDayTable

table

.1.3.6.1.4.1.2636.3.73.1.1.6.5 · 1 row entry · 4 columns

Open in standard view

Uses the juniper variant from /opt/observium/mibs/juniper.

Command help

Walk jnxoptIfOChSinkPrevDayTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'JNX-OPT-IF-MIB' -M '/opt/observium/mibs/juniper:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'JNX-OPT-IF-MIB::jnxoptIfOChSinkPrevDayTable'

A table of OCh sink performance monitoring information for 
the previous 24-hour interval.

jnxoptIfOChSinkPrevDayEntry row .1.3.6.1.4.1.2636.3.73.1.1.6.5.1

A conceptual row that contains OCh sink performance
monitoring information of an interface for the previous
24-hour interval.

Indexes

jnxoptIfOChSinkPrevDaySuspectedFlag

Column Syntax OID

If true, the data in this entry may be unreliable.

jnxoptIfOChSinkPrevDayLastInputPower

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2636.3.73.1.1.6.5.1.1

The last optical power monitored at the input during the
previous 24-hour interval.

jnxoptIfOChSinkPrevDayLowInputPower

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.6.5.1.2

The lowest optical power monitored at the input during the
previous 24-hour interval.

jnxoptIfOChSinkPrevDayHighInputPower

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.6.5.1.3

The highest optical power monitored at the input during the
previous 24-hour interval.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.6.5.1.4

jnxoptIfOChSrcCurrentTable

table

.1.3.6.1.4.1.2636.3.73.1.1.6.6 · 1 row entry · 6 columns

Open in standard view

Uses the juniper variant from /opt/observium/mibs/juniper.

Command help

Walk jnxoptIfOChSrcCurrentTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'JNX-OPT-IF-MIB' -M '/opt/observium/mibs/juniper:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'JNX-OPT-IF-MIB::jnxoptIfOChSrcCurrentTable'

A table of OCh source performance monitoring information for 
the current 15-minute interval.

jnxoptIfOChSrcCurrentEntry row .1.3.6.1.4.1.2636.3.73.1.1.6.6.1

A conceptual row that contains OCh source performance
monitoring information of an interface for the current
15-minute interval.

Indexes

jnxoptIfOChSrcCurrentSuspectedFlag

Column Syntax OID

If true, the data in this entry may be unreliable.

jnxoptIfOChSrcCurrentOutputPower

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2636.3.73.1.1.6.6.1.1

The optical power monitored at the output.

jnxoptIfOChSrcCurrentLowOutputPower

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.6.6.1.2

The lowest optical power monitored at the output during the
current 15-minute interval.

jnxoptIfOChSrcCurrentHighOutputPower

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.6.6.1.3

The highest optical power monitored at the output during the
current 15-minute interval.

jnxoptIfOChSrcCurrentLowerOutputPowerThreshold

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.6.6.1.4

The lower limit threshold on output power. If
jnxoptIfOChSrcCurrentOutputPower drops to this value or below,
a Threshold Crossing Alert (TCA) should be sent.

0.1 dbmSNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.6.6.1.5

jnxoptIfOChSrcCurrentUpperOutputPowerThreshold

The upper limit threshold on output power. If
jnxoptIfOChSrcCurrentOutputPower reaches or exceeds this value,
a Threshold Crossing Alert (TCA) should be sent.

0.1 dbmSNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.6.6.1.6

jnxoptIfOChSrcIntervalTable

table

.1.3.6.1.4.1.2636.3.73.1.1.6.7 · 1 row entry · 5 columns

Open in standard view

Uses the juniper variant from /opt/observium/mibs/juniper.

Command help

Walk jnxoptIfOChSrcIntervalTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'JNX-OPT-IF-MIB' -M '/opt/observium/mibs/juniper:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'JNX-OPT-IF-MIB::jnxoptIfOChSrcIntervalTable'

A table of historical OCh source performance monitoring 
information.

jnxoptIfOChSrcIntervalEntry row .1.3.6.1.4.1.2636.3.73.1.1.6.7.1

A conceptual row that contains OCh source performance
monitoring information of an interface during a particular
historical interval.

Indexes

IF-MIBifIndex jnxoptIfOChSrcIntervalNumber

Column Syntax OID

jnxoptIfOChSrcIntervalNumber

Uniquely identifies the interval.

jnxoptIfOChSrcIntervalSuspectedFlag

Type Constraints:
range: 1..96

.1.3.6.1.4.1.2636.3.73.1.1.6.7.1.1

If true, the data in this entry may be unreliable.

jnxoptIfOChSrcIntervalLastOutputPower

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2636.3.73.1.1.6.7.1.2

The last optical power monitored at the output during the
interval.

jnxoptIfOChSrcIntervalLowOutputPower

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.6.7.1.3

The lowest optical power monitored at the output during the
interval.

jnxoptIfOChSrcIntervalHighOutputPower

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.6.7.1.4

The highest optical power monitored at the output during the
interval.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.6.7.1.5

jnxoptIfOChSrcCurDayTable

table

.1.3.6.1.4.1.2636.3.73.1.1.6.8 · 1 row entry · 3 columns

Open in standard view

Uses the juniper variant from /opt/observium/mibs/juniper.

Command help

Walk jnxoptIfOChSrcCurDayTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'JNX-OPT-IF-MIB' -M '/opt/observium/mibs/juniper:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'JNX-OPT-IF-MIB::jnxoptIfOChSrcCurDayTable'

A table of OCh source performance monitoring information for 
the current 24-hour interval.

jnxoptIfOChSrcCurDayEntry row .1.3.6.1.4.1.2636.3.73.1.1.6.8.1

A conceptual row that contains OCh source performance
monitoring information of an interface for the current
24-hour interval.

Indexes

jnxoptIfOChSrcCurDaySuspectedFlag

Column Syntax OID

If true, the data in this entry may be unreliable.

jnxoptIfOChSrcCurDayLowOutputPower

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2636.3.73.1.1.6.8.1.1

The lowest optical power monitored at the output during the
current 24-hour interval.

jnxoptIfOChSrcCurDayHighOutputPower

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.6.8.1.2

The highest optical power monitored at the output during the
current 24-hour interval.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.6.8.1.3

jnxoptIfOChSrcPrevDayTable

table

.1.3.6.1.4.1.2636.3.73.1.1.6.9 · 1 row entry · 4 columns

Open in standard view

Uses the juniper variant from /opt/observium/mibs/juniper.

Command help

Walk jnxoptIfOChSrcPrevDayTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'JNX-OPT-IF-MIB' -M '/opt/observium/mibs/juniper:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'JNX-OPT-IF-MIB::jnxoptIfOChSrcPrevDayTable'

A table of OCh source performance monitoring information for 
the previous 24-hour interval.

jnxoptIfOChSrcPrevDayEntry row .1.3.6.1.4.1.2636.3.73.1.1.6.9.1

A conceptual row that contains OCh source performance
monitoring information of an interface for the previous
24-hour interval.

Indexes

jnxoptIfOChSrcPrevDaySuspectedFlag

Column Syntax OID

If true, the data in this entry may be unreliable.

jnxoptIfOChSrcPrevDayLastOutputPower

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2636.3.73.1.1.6.9.1.1

The last optical power monitored at the output during the
previous 24-hour interval.

jnxoptIfOChSrcPrevDayLowOutputPower

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.6.9.1.2

The lowest optical power monitored at the output during the
previous 24-hour interval.

jnxoptIfOChSrcPrevDayHighOutputPower

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.6.9.1.3

The highest optical power monitored at the output during the
previous 24-hour interval.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2636.3.73.1.1.6.9.1.4

jnxoptIfOTUkConfigTable

table

.1.3.6.1.4.1.2636.3.73.1.1.7.1 · 1 row entry · 14 columns

Open in standard view

Uses the juniper variant from /opt/observium/mibs/juniper.

Command help

Walk jnxoptIfOTUkConfigTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'JNX-OPT-IF-MIB' -M '/opt/observium/mibs/juniper:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'JNX-OPT-IF-MIB::jnxoptIfOTUkConfigTable'

A table of OTUk configuration information.

jnxoptIfOTUkConfigEntry row .1.3.6.1.4.1.2636.3.73.1.1.7.1.1

A conceptual row that contains OTUk configuration
information of an interface.

Indexes

jnxoptIfOTUkDirectionality

Column Syntax OID

Indicates the directionality of the entity.

jnxoptIfOTUkTraceIdentifierTransmitted

Type Values:

1	sink
2	source
3	bidirectional

.1.3.6.1.4.1.2636.3.73.1.1.7.1.1.1

jnxoptIfOTUkBitRateK

Indicates the bit rate of the entity.

JnxoptIfBitRateK

.1.3.6.1.4.1.2636.3.73.1.1.7.1.1.2

The trace identifier transmitted.
This object is applicable when jnxoptIfOTUkDirectionality
has the value source(2) or bidirectional(3). It must not
be instantiated in rows where jnxoptIfOTUkDirectionality
has the v…

Type Constraints:
range: 64

.1.3.6.1.4.1.2636.3.73.1.1.7.1.1.3

jnxoptIfOTUkDAPIExpected

The DAPI expected by the receiver.
This object is only applicable to the sink function, i.e.,
only when jnxoptIfOTUkDirectionality has the value sink(1)
or bidirectional(3). It must not be instantiated in rows
where…

Type Constraints:
range: 16

.1.3.6.1.4.1.2636.3.73.1.1.7.1.1.4

jnxoptIfOTUkSAPIExpected

The SAPI expected by the receiver.
This object is only applicable to the sink function, i.e.,
only when jnxoptIfOTUkDirectionality has the value sink(1)
or bidirectional(3). It must not be instantiated in rows
where…

jnxoptIfOTUkTraceIdentifierAccepted

Type Constraints:
range: 16

.1.3.6.1.4.1.2636.3.73.1.1.7.1.1.5

The actual trace identifier accepted.
This object is only applicable to the sink function, i.e.,
only when jnxoptIfOTUkDirectionality has the value sink(1)
or bidirectional(3). It must not be instantiated in rows
wh…

Type Constraints:
range: 64

.1.3.6.1.4.1.2636.3.73.1.1.7.1.1.6

jnxoptIfOTUkTIMDetMode

Indicates the mode of the Trace Identifier Mismatch (TIM)
Detection function.
This object is only applicable to the sink function, i.e.,
only when jnxoptIfOTUkDirectionality has the value sink(1)
or bidirectional(3)…

jnxoptIfOTUkTIMActEnabled

Type Values:

1	off
2	dapi
3	sapi
4	both

.1.3.6.1.4.1.2636.3.73.1.1.7.1.1.7

Indicates whether the Trace Identifier Mismatch (TIM)
Consequent Action function is enabled.
This object is only applicable to the sink function, i.e.,
only when jnxoptIfOTUkDirectionality has the value sink(1)
or b…

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2636.3.73.1.1.7.1.1.8

jnxoptIfOTUkDEGThr

Indicates the threshold level for declaring a performance
monitoring (PM) Second to be bad. A PM Second is declared bad if
the percentage of detected errored blocks in that second is
greater than or equal to jnxoptIf…

percentageJnxoptIfDEGThrr/w

Type Constraints:
range: 1..100

.1.3.6.1.4.1.2636.3.73.1.1.7.1.1.9

jnxoptIfOTUkDEGM

Indicates the threshold level for declaring a Degraded Signal
defect (dDEG). A dDEG shall be declared if jnxoptIfOTUkDEGM
consecutive bad PM Seconds are detected.
This object is only applicable to the sink function, …

jnxoptIfOTUkSinkAdaptActive

Type Constraints:
range: 2..10

.1.3.6.1.4.1.2636.3.73.1.1.7.1.1.10

Indicates whether the sink adaptation function is activated or
not.
This object is only applicable to the sink function, i.e.,
only when jnxoptIfOTUkDirectionality has the value sink(1)
or bidirectional(3). It must …

jnxoptIfOTUkSourceAdaptActive

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2636.3.73.1.1.7.1.1.11

Indicates whether the source adaptation function is activated or
not.
This object is only applicable to the source function, i.e.,
only when jnxoptIfOTUkDirectionality has the value source(2)
or bidirectional(3). It…

jnxoptIfOTUkSinkFECEnabled

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2636.3.73.1.1.7.1.1.12

If Forward Error Correction (FEC) is supported, this object
indicates whether FEC at the OTUk sink adaptation function is
enabled or not.
This object is only applicable to the sink function, i.e.,
only when jnxoptIf…

jnxoptIfOTUkCurrentStatus

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2636.3.73.1.1.7.1.1.13

Indicates the defect condition of the entity, if any.
This object is only applicable to the sink function, i.e.,
only when jnxoptIfOTUkDirectionality has the value sink(1)
or bidirectional(3). It must not be instanti…

Bits

Enumerated Values:

0	tim
1	deg
2	bdi
3	ssf
4	lof
5	ais
6	lom

.1.3.6.1.4.1.2636.3.73.1.1.7.1.1.14

jnxoptIfGCC0ConfigTable

table

.1.3.6.1.4.1.2636.3.73.1.1.7.2 · 1 row entry · 3 columns

Open in standard view

Uses the juniper variant from /opt/observium/mibs/juniper.

Command help

Walk jnxoptIfGCC0ConfigTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'JNX-OPT-IF-MIB' -M '/opt/observium/mibs/juniper:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'JNX-OPT-IF-MIB::jnxoptIfGCC0ConfigTable'

A table of GCC0 configuration information.

jnxoptIfGCC0ConfigEntry row .1.3.6.1.4.1.2636.3.73.1.1.7.2.1

A conceptual row that contains GCC0 configuration
information of an interface. Each instance must
correspond to an instance of jnxoptIfOTUkConfigEntry.
Separate source and/or sink instances may exist
for a given ifI…

Indexes

IF-MIBifIndex jnxoptIfGCC0Directionality

Column Syntax OID

jnxoptIfGCC0Directionality

Indicates the directionality of the entity.
The values source(2) and bidirectional(3) are
not allowed if the corresponding instance of
jnxoptIfOTUkDirectionality has the value sink(1).
The values sink(1) and bidirec…

SNMP-FRAMEWORK-MIBSnmpAdminStringr/w

Type Values:

1	sink
2	source
3	bidirectional

.1.3.6.1.4.1.2636.3.73.1.1.7.2.1.1

jnxoptIfGCC0Application

Indicates the application transported by the GCC0 entity.
Example applications are ECC, User data channel.
The value of this object may not be changed when
jnxoptIfGCC0RowStatus has the value active(1).

Type Constraints:
range: 0..255

.1.3.6.1.4.1.2636.3.73.1.1.7.2.1.2

jnxoptIfGCC0RowStatus

This columnar object is used for creating and deleting a
conceptual row of the jnxoptIfGCC0 config table.
It is used to model the addGCC0Access and removeGCC0Access
operations of an OTUk_TTP for GCC0 access control a…

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …

.1.3.6.1.4.1.2636.3.73.1.1.7.2.1.3

jnxoptIfODUkConfigTable

table

.1.3.6.1.4.1.2636.3.73.1.1.8.1 · 1 row entry · 5 columns

Open in standard view

Uses the juniper variant from /opt/observium/mibs/juniper.

Command help

Walk jnxoptIfODUkConfigTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'JNX-OPT-IF-MIB' -M '/opt/observium/mibs/juniper:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'JNX-OPT-IF-MIB::jnxoptIfODUkConfigTable'

A table of ODUk configuration information.

jnxoptIfODUkConfigEntry row .1.3.6.1.4.1.2636.3.73.1.1.8.1.1

A conceptual row that contains ODUk configuration
information of an interface.

Indexes

jnxoptIfODUkDirectionality

Column Syntax OID

Indicates the directionality of the entity.

jnxoptIfODUkTcmFieldsInUse

Type Values:

1	sink
2	source
3	bidirectional

.1.3.6.1.4.1.2636.3.73.1.1.8.1.1.1

jnxoptIfODUkBitRateK

Indicates the bit rate of the entity.

JnxoptIfBitRateK

.1.3.6.1.4.1.2636.3.73.1.1.8.1.1.2

Indicates the TCM field(s) that are currently in use.
The positions of the bits correspond to the TCM fields.
A bit that is set to 1 means that the corresponding TCM
field is used. This object will be updated when ro…

Bits

Enumerated Values:

0	tcmField1
1	tcmField2
2	tcmField3
3	tcmField4
4	tcmField5
5	tcmField6

.1.3.6.1.4.1.2636.3.73.1.1.8.1.1.3

jnxoptIfODUkPositionSeqCurrentSize

This variable indicates the current size of the position
sequence (i.e., number of TCM function and/or GCC12
access that have been created in the ODUk interface).
When the value of this variable is greater than zero,…

SNMPv2-SMIUnsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2636.3.73.1.1.8.1.1.4

jnxoptIfODUkTtpPresent

This object has the value true(1) if the ifEntry under which
it is instantiated contains an ODUk Trail Termination Point,
i.e., is the endpoint of an ODUk path. In that case there
will be a corresponding row in the O…

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2636.3.73.1.1.8.1.1.5

jnxoptIfODUkTtpConfigTable

table

.1.3.6.1.4.1.2636.3.73.1.1.8.2 · 1 row entry · 9 columns

Open in standard view

Uses the juniper variant from /opt/observium/mibs/juniper.

Command help

Walk jnxoptIfODUkTtpConfigTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'JNX-OPT-IF-MIB' -M '/opt/observium/mibs/juniper:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'JNX-OPT-IF-MIB::jnxoptIfODUkTtpConfigTable'

A table of ODUk TTP configuration information.

jnxoptIfODUkTtpConfigEntry row .1.3.6.1.4.1.2636.3.73.1.1.8.2.1

A conceptual row that contains ODUk TTP configuration
information of an interface.

Indexes

jnxoptIfODUkTtpTraceIdentifierTransmitted

Column Syntax OID

The trace identifier transmitted.
This object is applicable when jnxoptIfODUkDirectionality
has the value source(2) or bidirectional(3). It must not
be instantiated in rows where jnxoptIfODUkDirectionality
has the v…

jnxoptIfODUkTtpDAPIExpected

Type Constraints:
range: 64

.1.3.6.1.4.1.2636.3.73.1.1.8.2.1.1

The DAPI expected by the receiver.
This object is only applicable to the sink function, i.e.,
only when jnxoptIfODUkDirectionality has the value sink(1)
or bidirectional(3). It must not be instantiated in rows
where…

jnxoptIfODUkTtpSAPIExpected

Type Constraints:
range: 16

.1.3.6.1.4.1.2636.3.73.1.1.8.2.1.2

The SAPI expected by the receiver.
This object is only applicable to the sink function, i.e.,
only when jnxoptIfODUkDirectionality has the value sink(1)
or bidirectional(3). It must not be instantiated in rows
where…

jnxoptIfODUkTtpTraceIdentifierAccepted

Type Constraints:
range: 16

.1.3.6.1.4.1.2636.3.73.1.1.8.2.1.3

The actual trace identifier accepted.
This object is only applicable to the sink function, i.e.,
only when jnxoptIfODUkDirectionality has the value sink(1)
or bidirectional(3). It must not be instantiated in rows
wh…

jnxoptIfODUkTtpTIMDetMode

Type Constraints:
range: 64

.1.3.6.1.4.1.2636.3.73.1.1.8.2.1.4

Indicates the mode of the Trace Identifier Mismatch (TIM)
Detection function.
This object is only applicable to the sink function, i.e.,
only when jnxoptIfODUkDirectionality has the value sink(1)
or bidirectional(3)…

jnxoptIfODUkTtpTIMActEnabled

Type Values:

1	off
2	dapi
3	sapi
4	both

.1.3.6.1.4.1.2636.3.73.1.1.8.2.1.5

Indicates whether the Trace Identifier Mismatch (TIM)
Consequent Action function is enabled.
This object is only applicable to the sink function, i.e.,
only when jnxoptIfODUkDirectionality has the value sink(1)
or b…

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2636.3.73.1.1.8.2.1.6

jnxoptIfODUkTtpDEGThr

percentageJnxoptIfDEGThrr/w

Type Constraints:
range: 1..100

.1.3.6.1.4.1.2636.3.73.1.1.8.2.1.7

jnxoptIfODUkTtpDEGM

Indicates the threshold level for declaring a Degraded Signal
defect (dDEG). A dDEG shall be declared if jnxoptIfODUkDEGM
consecutive bad PM Seconds are detected.
This object is only applicable to the sink function, …

jnxoptIfODUkTtpCurrentStatus

Type Constraints:
range: 2..10

.1.3.6.1.4.1.2636.3.73.1.1.8.2.1.8

Indicates the defect condition of the entity, if any.
This object is only applicable to the sink function, i.e.,
only when jnxoptIfODUkDirectionality has the value sink(1)
or bidirectional(3). It must not be instanti…

Bits

Enumerated Values:

0	oci
1	lck
2	tim
3	deg
4	bdi
5	ssf

.1.3.6.1.4.1.2636.3.73.1.1.8.2.1.9

jnxoptIfODUkPositionSeqTable

table

.1.3.6.1.4.1.2636.3.73.1.1.8.3 · 1 row entry · 3 columns

Open in standard view

Uses the juniper variant from /opt/observium/mibs/juniper.

Command help

Walk jnxoptIfODUkPositionSeqTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'JNX-OPT-IF-MIB' -M '/opt/observium/mibs/juniper:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'JNX-OPT-IF-MIB::jnxoptIfODUkPositionSeqTable'

A table of ODUk Position Sequence information.

jnxoptIfODUkPositionSeqEntry row .1.3.6.1.4.1.2636.3.73.1.1.8.3.1

A conceptual row that contains ODUk position sequence
information of an ODUk interface. The ODUk interface
is identified by the ifIndex. Associated with each
ODUk interface there may be one of more conceptual
rows i…

Indexes

IF-MIBifIndex jnxoptIfODUkPositionSeqIndex

Column	Syntax	OID
jnxoptIfODUkPositionSeqIndex This variable identifies a row in the jnxoptIfODUkPositionSeqTable Table. Each row of the jnxoptIfODUkPositionSeqTable Table represents a TCM or GCC12 access function within the associated ODUk interface.	Unsigned32 Constraints: `range: 1-4294967295`	`.1.3.6.1.4.1.2636.3.73.1.1.8.3.1.1`
jnxoptIfODUkPositionSeqPosition This variable indicates the position of the TCM or GCC12 access function within the sequence of TCMs & GCC12 access functions of the associated ODUk interface. The TCM or GCC12 presented by this row is referenced by…	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2636.3.73.1.1.8.3.1.2`
jnxoptIfODUkPositionSeqPointer This variable identifies the TCM or GCC12 access function by pointing to the corresponding jnxoptIfODUkT or jnxoptIfGCC12 entity.	SNMPv2-TCRowPointer Description: Represents a pointer to a conceptual row. The value is the name of the instance of the first accessible columnar object in the conceptual row. For example, ifIndex.3 would point to the 3rd row in the ifTable…	`.1.3.6.1.4.1.2636.3.73.1.1.8.3.1.3`

jnxoptIfODUkNimConfigTable

table

.1.3.6.1.4.1.2636.3.73.1.1.8.4 · 1 row entry · 10 columns

Open in standard view

Uses the juniper variant from /opt/observium/mibs/juniper.

Command help

Walk jnxoptIfODUkNimConfigTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'JNX-OPT-IF-MIB' -M '/opt/observium/mibs/juniper:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'JNX-OPT-IF-MIB::jnxoptIfODUkNimConfigTable'

A table of ODUkNim configuration information.

jnxoptIfODUkNimConfigEntry row .1.3.6.1.4.1.2636.3.73.1.1.8.4.1

A conceptual row that contains ODUkNim configuration
information of an interface. Each instance must
correspond to an instance of jnxoptIfODUkConfigEntry
for which jnxoptIfODUkTtpPresent has the value false(2).
Insta…

Indexes

IF-MIBifIndex jnxoptIfODUkNimDirectionality

Column Syntax OID

jnxoptIfODUkNimDirectionality

Specifies the monitor point for the ODUk Path non-intrusive
monitoring function. The value source(2) is not allowed
if the corresponding instance of jnxoptIfODUkDirectionality
has the value sink(1), and the value sin…

JnxoptIfSinkOrSource

Type Values:

1	sink
2	source

.1.3.6.1.4.1.2636.3.73.1.1.8.4.1.1

jnxoptIfODUkNimDAPIExpected

The DAPI expected by the receiver.
This object has no effect if jnxoptIfODUkNimTIMDetMode has
the value off(1) or sapi(3).

jnxoptIfODUkNimSAPIExpected

Type Constraints:
range: 16

.1.3.6.1.4.1.2636.3.73.1.1.8.4.1.2

The SAPI expected by the receiver.
This object has no effect if jnxoptIfODUkNimTIMDetMode has
the value off(1) or dapi(2).

jnxoptIfODUkNimTraceIdentifierAccepted

Type Constraints:
range: 16

.1.3.6.1.4.1.2636.3.73.1.1.8.4.1.3

The actual trace identifier accepted. The value of
this object is unspecified if jnxoptIfODUkNimCurrentStatus
has any of the bit positions oci(0), lck(1), or ssf(5)
set or if jnxoptIfODUkNimRowStatus has any value ot…

jnxoptIfODUkNimTIMDetMode

Type Constraints:
range: 64

.1.3.6.1.4.1.2636.3.73.1.1.8.4.1.4

Indicates the mode of the Trace Identifier Mismatch (TIM)
Detection function.

jnxoptIfODUkNimTIMActEnabled

Type Values:

1	off
2	dapi
3	sapi
4	both

.1.3.6.1.4.1.2636.3.73.1.1.8.4.1.5

Indicates whether the Trace Identifier Mismatch (TIM)
Consequent Action function is enabled.

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2636.3.73.1.1.8.4.1.6

jnxoptIfODUkNimDEGThr

Indicates the threshold level for declaring a performance
monitoring (PM) Second to be bad. A PM Second is declared bad
if the percentage of detected errored blocks in that second is
greater than or equal to jnxoptIf…

percentageJnxoptIfDEGThrr/w

Type Constraints:
range: 1..100

.1.3.6.1.4.1.2636.3.73.1.1.8.4.1.7

jnxoptIfODUkNimDEGM

Indicates the threshold level for declaring a Degraded Signal
defect (dDEG). A dDEG shall be declared if jnxoptIfODUkNimDEGM
consecutive bad PM Seconds are detected.

jnxoptIfODUkNimCurrentStatus

Type Constraints:
range: 2..10

.1.3.6.1.4.1.2636.3.73.1.1.8.4.1.8

Indicates the defect condition of the entity, if
any. The value of this object is unspecified if
jnxoptIfODUkNimRowStatus has any value other than
active(1).

Bits

Enumerated Values:

0	oci
1	lck
2	tim
3	deg
4	bdi
5	ssf

.1.3.6.1.4.1.2636.3.73.1.1.8.4.1.9

jnxoptIfODUkNimRowStatus

This columnar object is used for creating and deleting
a conceptual row of the jnxoptIfODUkNim config table.
It is used to model the activateNim and deactivateNim
operations of an OTUk_CTP for non-intrusive monitorin…

IF-MIBifIndex jnxoptIfGCC12Codirectional jnxoptIfGCC12GCCAccess

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.2636.3.73.1.1.8.4.1.10

jnxoptIfGCC12ConfigTable

table

.1.3.6.1.4.1.2636.3.73.1.1.8.5 · 1 row entry · 5 columns

Open in standard view

Uses the juniper variant from /opt/observium/mibs/juniper.

Command help

Walk jnxoptIfGCC12ConfigTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'JNX-OPT-IF-MIB' -M '/opt/observium/mibs/juniper:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'JNX-OPT-IF-MIB::jnxoptIfGCC12ConfigTable'

A table of GCC12 configuration information. 
The GCC function processes the GCC overhead bytes passing 
through them but leave the remainder of the ODUk overhead 
and payload data alone.

jnxoptIfGCC12ConfigEntry row .1.3.6.1.4.1.2636.3.73.1.1.8.5.1

A conceptual row that contains GCC12 configuration
information of an interface. Each instance must
correspond to an instance of jnxoptIfODUkConfigEntry.
Separate instances providing GCC1-only access and
GCC2-only ac…

Indexes

Column Syntax OID

jnxoptIfGCC12Codirectional

Indicates the directionality of the GCC12 termination with
respect to the associated ODUk CTP. The value true(1) means
that the sink part of the GCC12 extracts COMMS data from the
signal at the input to the ODUk CTP …

jnxoptIfGCC12GCCPassThrough

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2636.3.73.1.1.8.5.1.1

jnxoptIfGCC12GCCAccess

Indicates the GCC access represented by the entity.

Enumeration

Enumerated Values:

1	gcc1
2	gcc2
3	gcc1and2

.1.3.6.1.4.1.2636.3.73.1.1.8.5.1.2

Controls whether the selected GCC overhead bytes are passed
through or modified. The value true(1) means that the selected
GCC overhead bytes are passed through unmodified from the ODUk
CTP input to the ODUk CTP outp…

SNMP-FRAMEWORK-MIBSnmpAdminStringr/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2636.3.73.1.1.8.5.1.3

jnxoptIfGCC12Application

Indicates the application transported by the GCC12 entity.
Example applications are ECC, User data channel.
The value of this object may not be changed when
jnxoptIfGCC12RowStatus has the value active(1).

Type Constraints:
range: 0..255

.1.3.6.1.4.1.2636.3.73.1.1.8.5.1.4

jnxoptIfGCC12RowStatus

This columnar object is used for creating and deleting
a conceptual row of the jnxoptIfGCC12 config table. It is
used to model the addGCC12Access and removeGCC12Access
operations of an ODUk_CTP or ODUk_TTP for GCC12 …

IF-MIBifIndex jnxoptIfODUkTTcmField jnxoptIfODUkTCodirectional

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.2636.3.73.1.1.8.5.1.5

jnxoptIfODUkTConfigTable

table

.1.3.6.1.4.1.2636.3.73.1.1.9.1 · 1 row entry · 15 columns

Open in standard view

Uses the juniper variant from /opt/observium/mibs/juniper.

Command help

Walk jnxoptIfODUkTConfigTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'JNX-OPT-IF-MIB' -M '/opt/observium/mibs/juniper:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'JNX-OPT-IF-MIB::jnxoptIfODUkTConfigTable'

A table of ODUkT configuration information.

jnxoptIfODUkTConfigEntry row .1.3.6.1.4.1.2636.3.73.1.1.9.1.1

A conceptual row that contains ODUkT configuration
information of an interface. Each instance must
correspond to an instance of jnxoptIfODUkConfigEntry.
Rows in this table are mutually exclusive with rows
in the ODU…

Indexes

Column Syntax OID

jnxoptIfODUkTTcmField

Indicates the tandem connection monitoring
field of the ODUk OH. Valid values are
integers from 1 to 6.

Unsigned32

Constraints:
range: 1-6

.1.3.6.1.4.1.2636.3.73.1.1.9.1.1.1

jnxoptIfODUkTCodirectional

Indicates the directionality of the ODUkT termination point with
respect to the associated ODUk CTP. The value true(1) means
that the sink part of the ODUkT TP extracts TCM data from the
signal at the input to the OD…

jnxoptIfODUkTTraceIdentifierTransmitted

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2636.3.73.1.1.9.1.1.2

The trace identifier transmitted.
This object is applicable only to the following three cases.
(i) jnxoptIfODUkDirectionality has the value bidirectional(3), or
(ii) jnxoptIfODUkDirectionality has the value sink(1) an…

jnxoptIfODUkTDAPIExpected

Type Constraints:
range: 64

.1.3.6.1.4.1.2636.3.73.1.1.9.1.1.3

The DAPI expected by the receiver.
This object is applicable only to the following three cases.
(i) jnxoptIfODUkDirectionality has the value bidirectional(3), or
(ii) jnxoptIfODUkDirectionality has the value sink(1) a…

jnxoptIfODUkTSAPIExpected

Type Constraints:
range: 16

.1.3.6.1.4.1.2636.3.73.1.1.9.1.1.4

The SAPI expected by the receiver.
This object is applicable only to the following three cases.
(i) jnxoptIfODUkDirectionality has the value bidirectional(3), or
(ii) jnxoptIfODUkDirectionality has the value sink(1) a…

jnxoptIfODUkTTraceIdentifierAccepted

Type Constraints:
range: 16

.1.3.6.1.4.1.2636.3.73.1.1.9.1.1.5

The actual trace identifier accepted.
This object is applicable only to the following three cases.
(i) jnxoptIfODUkDirectionality has the value bidirectional(3), or
(ii) jnxoptIfODUkDirectionality has the value sink(1…

Type Constraints:
range: 64

.1.3.6.1.4.1.2636.3.73.1.1.9.1.1.6

jnxoptIfODUkTTIMDetMode

Indicates the mode of the Trace Identifier Mismatch (TIM)
Detection function.
This object is applicable only to the following three cases.
(i) jnxoptIfODUkDirectionality has the value bidirectional(3), or
(ii) jnxopt…

jnxoptIfODUkTTIMActEnabled

Type Values:

1	off
2	dapi
3	sapi
4	both

.1.3.6.1.4.1.2636.3.73.1.1.9.1.1.7

Indicates whether the Trace Identifier Mismatch (TIM)
Consequent Action function is enabled.
This object is applicable only to the following three cases.
(i) jnxoptIfODUkDirectionality has the value bidirectional(3), …

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2636.3.73.1.1.9.1.1.8

jnxoptIfODUkTDEGThr

percentageJnxoptIfDEGThrr/w

Type Constraints:
range: 1..100

.1.3.6.1.4.1.2636.3.73.1.1.9.1.1.9

jnxoptIfODUkTDEGM

Indicates the threshold level for declaring a Degraded Signal
defect (dDEG). A dDEG shall be declared if jnxoptIfODUkTDEGM
consecutive bad PM Seconds are detected.
This object is applicable only to the following thre…

jnxoptIfODUkTSinkLockSignalAdminState

Type Constraints:
range: 2..10

.1.3.6.1.4.1.2636.3.73.1.1.9.1.1.10

jnxoptIfODUkTSinkMode

This variable specifies the TCM mode at the entity.
The value operational(1) means that TCM Overhead (TCMOH)
processes (see ITU-T G.798) shall be
performed and consequent actions for AIS, Trail
Signal Fail (TSF), Tr…

Enumerationr/w

Enumerated Values:

1	operational
2	monitor

.1.3.6.1.4.1.2636.3.73.1.1.9.1.1.11

Provides the capability to provision the LOCK signal, which
is one of the ODUk maintenance signals, at the ODUKT sink. When
a Tandem Connection endpoint is set to admin state locked,
it inserts the ODUk-LCK signal in…

Enumerationr/w

Enumerated Values:

1	locked
2	normal

.1.3.6.1.4.1.2636.3.73.1.1.9.1.1.12

jnxoptIfODUkTSourceLockSignalAdminState

Provides the capability to provision the LOCK signal, which
is one of the ODUk maintenance signals, at the source.
When a Tandem Connection endpoint is set to admin state
locked, it inserts the ODUk-LCK signal in the…

Enumerationr/w

Enumerated Values:

1	locked
2	normal

.1.3.6.1.4.1.2636.3.73.1.1.9.1.1.13

jnxoptIfODUkTCurrentStatus

Indicates the defect condition of the entity, if any.
This object is applicable only when either one of the
following three cases holds:
(i) jnxoptIfODUkDirectionality has the value bidirectional(3), or
(ii) jnxoptIf…

Bits

Enumerated Values:

0	oci
1	lck
2	tim
3	deg
4	bdi
5	ssf

.1.3.6.1.4.1.2636.3.73.1.1.9.1.1.14

jnxoptIfODUkTRowStatus

This columnar object is used for creating and deleting a
conceptual row of the jnxoptIfODUkT config table.
It is used to model the addTCM and removeTCM operations of an
ODUk_CTP or ODUk_TTP for Tandem connection moni…

IF-MIBifIndex jnxoptIfODUkTNimTcmField jnxoptIfODUkTNimDirectionality

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.2636.3.73.1.1.9.1.1.15

jnxoptIfODUkTNimConfigTable

table

.1.3.6.1.4.1.2636.3.73.1.1.9.2 · 1 row entry · 11 columns

Open in standard view

Uses the juniper variant from /opt/observium/mibs/juniper.

Command help

Walk jnxoptIfODUkTNimConfigTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'JNX-OPT-IF-MIB' -M '/opt/observium/mibs/juniper:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'JNX-OPT-IF-MIB::jnxoptIfODUkTNimConfigTable'

A table of ODUkTNim configuration information.

jnxoptIfODUkTNimConfigEntry row .1.3.6.1.4.1.2636.3.73.1.1.9.2.1

A conceptual row that contains ODUkTNim configuration
information of an interface. Each instance must
correspond to an instance of jnxoptIfODUkConfigEntry.
Rows in this table are mutually exclusive with rows
in the …

Indexes

Column Syntax OID

jnxoptIfODUkTNimTcmField

Indicates the tandem connection monitoring
field of the ODUk OH on which non-intrusive monitoring
is performed. Valid values are
integers from 1 to 6.

Unsigned32

Constraints:
range: 1-6

.1.3.6.1.4.1.2636.3.73.1.1.9.2.1.1

jnxoptIfODUkTNimDirectionality

Specifies the monitor point for the ODUk TCM non-intrusive
monitoring function. The value source(2) is not allowed
if the corresponding instance of jnxoptIfODUkDirectionality
has the value sink(1), and the value sink…

JnxoptIfSinkOrSource

Type Values:

1	sink
2	source

.1.3.6.1.4.1.2636.3.73.1.1.9.2.1.2

jnxoptIfODUkTNimDAPIExpected

The DAPI expected by the receiver.
This object has no effect if jnxoptIfODUkTNimTIMDetMode has
the value off(1) or sapi(3).

jnxoptIfODUkTNimSAPIExpected

Type Constraints:
range: 16

.1.3.6.1.4.1.2636.3.73.1.1.9.2.1.3

The SAPI expected by the receiver.
This object has no effect if jnxoptIfODUkTNimTIMDetMode has
the value off(1) or dapi(2).

jnxoptIfODUkTNimTraceIdentifierAccepted

Type Constraints:
range: 16

.1.3.6.1.4.1.2636.3.73.1.1.9.2.1.4

The actual trace identifier accepted. The value of
this object is unspecified if jnxoptIfODUkTNimCurrentStatus
has any of the bit positions oci(0), lck(1), or ssf(5)
set or if jnxoptIfODUkTNimRowStatus has any value …

jnxoptIfODUkTNimTIMDetMode

Type Constraints:
range: 64

.1.3.6.1.4.1.2636.3.73.1.1.9.2.1.5

Indicates the mode of the Trace Identifier Mismatch (TIM)
Detection function.

jnxoptIfODUkTNimTIMActEnabled

Type Values:

1	off
2	dapi
3	sapi
4	both

.1.3.6.1.4.1.2636.3.73.1.1.9.2.1.6

Indicates whether the Trace Identifier Mismatch (TIM)
Consequent Action function is enabled.

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2636.3.73.1.1.9.2.1.7

jnxoptIfODUkTNimDEGThr

percentageJnxoptIfDEGThrr/w

Type Constraints:
range: 1..100

.1.3.6.1.4.1.2636.3.73.1.1.9.2.1.8

jnxoptIfODUkTNimDEGM

Indicates the threshold level for declaring a Degraded Signal
defect (dDEG). A dDEG shall be declared if jnxoptIfODUkTNimDEGM
consecutive bad PM Seconds are detected.

jnxoptIfODUkTNimCurrentStatus

Type Constraints:
range: 2..10

.1.3.6.1.4.1.2636.3.73.1.1.9.2.1.9

Indicates the defect condition of the entity, if any.
The value of this object is unspecified if
jnxoptIfODUkTNimRowStatus has any value other than
active(1).

Bits

Enumerated Values:

0	oci
1	lck
2	tim
3	deg
4	bdi
5	ssf

.1.3.6.1.4.1.2636.3.73.1.1.9.2.1.10

jnxoptIfODUkTNimRowStatus

This columnar object is used for creating and deleting a
conceptual row of the jnxoptIfODUkTNim config table.
It is used to model the addTCM and removeTCM operations of an
ODUk_CTP or ODUk_TTP for non-intrusive Tande…