JNX-MPLS-TE-P2MP-STD-MIB Table View

The mplsTeP2mpTunnelTable allows new P2MP MPLS tunnels to be
created between an LSR and one or more remote end-points,
and existing P2MP tunnels to be reconfigured or removed.
          
This table sparse augments mplsTunnelTable in
MPLS-TE-STD-MIB such that entries in that table can be
flagged as point-to-multipoint, and can be configured and
monitored appropriately.

jnxMplsTeP2mpTunnelEntry row .1.3.6.1.4.1.2636.5.7.1.2.1.1

An entry in this table represents a P2MP MPLS tunnel.
An entry can be created by a network administrator or by an
SNMP agent as instructed by an MPLS signaling protocol.

An entry in this table MUST correspo…

Indexes

No indexes recorded

Column	Syntax	OID
jnxMplsTeP2mpTunnelP2mpIntegrity Denotes whether or not P2MP Integrity is required for this tunnel. If P2MP integrity is operational on a P2MP tunnel then the failure of the path to any of the tunnel destinations should cause the teardow…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2636.5.7.1.2.1.1.2
jnxMplsTeP2mpTunnelBranchRole This value supplements the value in the object mplsTunnelRole in MPLS-TE-STD-MIB that indicates the role of this LSR in the tunnel represented by this entry in mplsTeP2mpTunnelTable. mplsTunnelRole may ta…	Enumerationr/w	.1.3.6.1.4.1.2636.5.7.1.2.1.1.3
jnxMplsTeP2mpTunnelP2mpXcIndex This object contains the value of mplsXCIndex, the primary index of the mplsXCTable for all cross-connect entries for this P2MP LSP. If no XC entries have been created yet, this object must return zero. …	MPLS-LSR-STD-MIBMplsIndexType Type Constraints: range: 1..24	.1.3.6.1.4.1.2636.5.7.1.2.1.1.4
jnxMplsTeP2mpTunnelRowStatus This variable is used to create, modify, and/or delete a row in this table. When a row in this table is in active(1) state, no objects in that row can be modified by the agent except mplsTeP2mpTunnelRowStatus and mplsT…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2636.5.7.1.2.1.1.5
jnxMplsTeP2mpTunnelStorageType The storage type for this tunnel entry. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row.	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.4.1.2636.5.7.1.2.1.1.6

The mplsTeP2mpTunnelDestTable allows new destinations of
P2MP MPLS tunnels to be added to and removed from P2MP
tunnels.

jnxMplsTeP2mpTunnelDestEntry row .1.3.6.1.4.1.2636.5.7.1.2.3.1

An entry in this table represents a destination of a P2MP
MPLS tunnel. An entry can be created by a network
administrator or by an SNMP agent as instructed by an MPLS
signaling protocol.

Entries in this tab…

Indexes

No indexes recorded

Column	Syntax	OID
jnxMplsTeP2mpTunnelDestSrcSubGroupOriginType This object identifies the type of address carried in mplsTeP2mpTunnelDestSrcSubGroupOrigin. Since the object mplsTeP2mpTunnelDestSrcSubGroupOrigin must conform to the protocol specification, this object …	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.2636.5.7.1.2.3.1.1
jnxMplsTeP2mpTunnelDestSrcSubGroupOrigin The TE Router ID (reachable and stable IP address) of the originator of the P2MP sub-group as received on a Path message by a transit or egress LSR. This object is interpreted in the context of mplsTeP2mp…	OctetString	.1.3.6.1.4.1.2636.5.7.1.2.3.1.2
jnxMplsTeP2mpTunnelDestSrcSubGroupID The unique identifier assigned by the sub-group originator for this sub-group of this P2MP tunnel as received on a Path message by a transit or egress LSR. The value of the sub-group identifier used on ou…	Unsigned32	.1.3.6.1.4.1.2636.5.7.1.2.3.1.3
jnxMplsTeP2mpTunnelDestSubGroupOriginType This object identifies the type of address carried in mplsTeP2mpTunnelDestSubGroupOrigin. This object must return either ipv4(1) or ipv6(2) in keeping with the protocol specification.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.2636.5.7.1.2.3.1.4
jnxMplsTeP2mpTunnelDestSubGroupOrigin The TE Router ID (reachable and stable IP address) of the originator of the P2MP sub-group. In many cases, this will be the ingress LSR of the P2MP tunnel and will be the received signaled value as available in mplsTeP2…	OctetString	.1.3.6.1.4.1.2636.5.7.1.2.3.1.5
jnxMplsTeP2mpTunnelDestSubGroupID The unique identifier assigned by the sub-group originator for this sub-group of this P2MP tunnel. An appropriate value for this object during row creation when the sub-group origin in mplsTeP2mpTunnelDes…	Unsigned32	.1.3.6.1.4.1.2636.5.7.1.2.3.1.6
jnxMplsTeP2mpTunnelDestDestinationType This object identifies the type of address carried in mplsTeP2mpTunnelDestDestination. This object forms part of the index of this table and can, therefore, not return the value unknown(0). Similarly, sin…	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.2636.5.7.1.2.3.1.7
jnxMplsTeP2mpTunnelDestDestination A single destination of this P2MP tunnel. That is, a routable TE address of a leaf. This will often be the TE Router ID of the leaf, but can be any interface address. When a signaling protocol is used, th…	OctetString	.1.3.6.1.4.1.2636.5.7.1.2.3.1.8
jnxMplsTeP2mpTunnelDestBranchOutSegment This object identifies the outgoing branch from this LSR towards the destination represented by this table entry. It must be a unique identifier within the scope of this tunnel. If MPLS-LSR-STD-MIB is imp…	MPLS-LSR-STD-MIBMplsIndexType Type Constraints: range: 1..24	.1.3.6.1.4.1.2636.5.7.1.2.3.1.9
jnxMplsTeP2mpTunnelDestHopTableIndex Index into the mplsTunnelHopTable entry that specifies the explicit route hops for this destination of the P2MP tunnel. This object represents the configured route for the branch of the P2M…	MPLS-TC-STD-MIBMplsPathIndexOrZeror/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2636.5.7.1.2.3.1.10
jnxMplsTeP2mpTunnelDestPathInUse This value denotes the configured path that was chosen as the explicit path to this destination of this P2MP tunnel. This value reflects the secondary index into mplsTunnelHopTable where the primary index comes from mpl…	MPLS-TC-STD-MIBMplsPathIndexOrZeror/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2636.5.7.1.2.3.1.11
jnxMplsTeP2mpTunnelDestCHopTableIndex Index into the mplsTunnelCHopTable that identifies the explicit path for this destination of the P2MP tunnel. This path is based on the chosen configured path identified by mplsTeP2mpTunnelDestHopTableInd…	MPLS-TC-STD-MIBMplsPathIndexOrZero Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2636.5.7.1.2.3.1.12
jnxMplsTeP2mpTunnelDestARHopTableIndex Index into the mplsTunnelARHopTable that identifies the actual hops traversed to this destination of the P2MP tunnel. This is automatically updated by the agent when the actual hops becomes available. If …	MPLS-TC-STD-MIBMplsPathIndexOrZero Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2636.5.7.1.2.3.1.13
jnxMplsTeP2mpTunnelDestTotalUpTime This value represents the aggregate up time for all instances of this tunnel to this destination, if this information is available. If this information is not available, this object MUST return a value of…	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2636.5.7.1.2.3.1.14
jnxMplsTeP2mpTunnelDestInstanceUpTime This value identifies the total time that the currently active tunnel instance to this destination has had its operational status (mplsTeP2mpTunnelDestOperStatus) set to up(1) since it was last previously not up(1).	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2636.5.7.1.2.3.1.15
jnxMplsTeP2mpTunnelDestPathChanges This object counts the number of times the actual path for this destination of this P2MP tunnel instance has changed. This object should be read in conjunction with mplsTeP2mpTunnelDestDiscontinuityTime.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2636.5.7.1.2.3.1.16
jnxMplsTeP2mpTunnelDestLastPathChange Specifies the time since the last change to the actual path for this destination of this P2MP tunnel instance.	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2636.5.7.1.2.3.1.17
jnxMplsTeP2mpTunnelDestCreationTime Specifies the value of sysUpTime when the first instance of this tunnel came into existence for this destination. That is, when the value of mplsTeP2mpTunnelDestOperStatus was first set to up(1).	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.2636.5.7.1.2.3.1.18
jnxMplsTeP2mpTunnelDestStateTransitions This object counts the number of times the status (mplsTeP2mpTunnelDestOperStatus) of this tunnel instance to this destination has changed. This object should be read in conjunction with mp…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2636.5.7.1.2.3.1.19
jnxMplsTeP2mpTunnelDestDiscontinuityTime The value of sysUpTime on the most recent occasion at which any one or more of this row's Counter32 objects experienced a discontinuity. If no such discontinuity has occurred since the last re-initialization of the loca…	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.2636.5.7.1.2.3.1.20
jnxMplsTeP2mpTunnelDestAdminStatus Indicates the desired operational status of this destination of this P2MP tunnel.	Enumerationr/w	.1.3.6.1.4.1.2636.5.7.1.2.3.1.21
jnxMplsTeP2mpTunnelDestOperStatus Indicates the actual operational status of this destination of this P2MP tunnel. This object may be compared to mplsTunnelOperStatus that includes two other values: dormant(5) -- some component is missing …	Enumeration	.1.3.6.1.4.1.2636.5.7.1.2.3.1.22
jnxMplsTeP2mpTunnelDestRowStatus This object is used to create, modify, and/or delete a row in this table. When a row in this table is in active(1) state, no objects in that row can be modified by SET operations except mplsTeP2mpTunnelDestAdminStatus a…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2636.5.7.1.2.3.1.23
jnxMplsTeP2mpTunnelDestStorageType The storage type for this table entry. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row.	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.4.1.2636.5.7.1.2.3.1.24

This table provides per-tunnel branch MPLS performance
information.
          
This table is not valid for switching types other than
packet.

jnxMplsTeP2mpTunnelBranchPerfEntry row .1.3.6.1.4.1.2636.5.7.1.2.4.1

An entry in this table is created by the LSR for each
downstream branch (out-segment) from this LSR for this P2MP
tunnel.

More than one destination as represented by an entry in the
mplsTeP2mpTunnelDestTabl…

Indexes

No indexes recorded

Column	Syntax	OID
jnxMplsTeP2mpTunnelBranchPerfBranch This object identifies an outgoing branch from this LSR for this tunnel. Its value is unique within the context of the tunnel. If MPLS-LSR-STD-MIB is implemented, this object should …	MPLS-LSR-STD-MIBMplsIndexType Type Constraints: range: 1..24	.1.3.6.1.4.1.2636.5.7.1.2.4.1.1
jnxMplsTeP2mpTunnelBranchPerfPackets Number of packets forwarded by the tunnel onto this branch. This object should represents the 32-bit value of the least significant part of the 64-bit value if both mplsTeP2mpTunnelBranchPerfHCPackets is returned. This …	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2636.5.7.1.2.4.1.2
jnxMplsTeP2mpTunnelBranchPerfHCPackets High capacity counter for number of packets forwarded by the tunnel onto this branch. This object should be read in conjunction with mplsTeP2mpTunnelBranchDiscontinuityTime.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2636.5.7.1.2.4.1.3
jnxMplsTeP2mpTunnelBranchPerfErrors Number of packets dropped because of errors or for other reasons, that were supposed to be forwarded onto this branch for this tunnel. This object should be read in conjunction with mplsTeP2mpTunnelBranchDiscontinuityTi…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2636.5.7.1.2.4.1.4
jnxMplsTeP2mpTunnelBranchPerfBytes Number of bytes forwarded by the tunnel onto this branch. This object should represents the 32-bit value of the least significant part of the 64-bit value if both mplsTeP2mpTunnelBranchPerf…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2636.5.7.1.2.4.1.5
jnxMplsTeP2mpTunnelBranchPerfHCBytes High capacity counter for number of bytes forwarded by the tunnel onto this branch. This object should be read in conjunction with mplsTeP2mpTunnelBranchDiscontinuityTime.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2636.5.7.1.2.4.1.6
jnxMplsTeP2mpTunnelBranchDiscontinuityTime The value of sysUpTime on the most recent occasion at which any one or more of this row's Counter32 or Counter64 objects experienced a discontinuity. If no such discontinuity has occurred since the last re-initializatio…	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.2636.5.7.1.2.4.1.7