Standard view Table view

JNX-MPLS-TE-P2MP-STD-MIB

        Copyright (c) 2009 IETF Trust and the persons identified as
the document authors. All rights reserved.
        
This document is subject to BCP 78 and the IETF Trust's
Legal Provisions Relating to IETF Documents in effect on the
date of publication of this document
(http://trustee.ietf.org/license-info). Please review these
documents carefully, as they describe your rights and
restrictions with respect to this document.
        
The initial version of this MIB module was published in
RFC XXXX. For full legal notices see the RFC itself or see:
http://www.ietf.org/copyrights/ianamib.html
-- RFC Editor. Please replace XXXX with the RFC number for this
-- document and remove this note.
        
This MIB module contains managed object definitions
for Point-to-Multipoint (P2MP) MPLS Traffic Engineering (TE)
defined in:
1. Signaling Requirements for Point-to-Multipoint
   Traffic-Engineered MPLS Label Switched Paths (LSPs),
   S. Yasukawa, RFC 4461, April 2006.
2. Extensions to Resource Reservation Protocol - Traffic
   Engineering (RSVP-TE) for Point-to-Multipoint TE Label
   Switched Paths (LSPs), Aggarwal, R., Papadimitriou, D.,
   and Yasukawa, S., RFC 4875, May 2007.
Source file
JNX-MPLS-TE-P2MP-STD-MIB
Last revised
Identity
jnxMplsTeP2mpStdMIB
Base OID
1.3.6.1.4.1.2636.5.7.1
Imported Objects
DIFFSERV-MIB IndexInteger IndexIntegerNextFree
INET-ADDRESS-MIB InetAddress InetAddressType
JUNIPER-EXPERIMENT-MIB jnxP2mpExperiment
MPLS-LSR-STD-MIB MplsIndexType
MPLS-TC-STD-MIB MplsPathIndexOrZero mplsStdMIB
MPLS-TE-STD-MIB mplsTunnelEgressLSRId mplsTunnelIndex mplsTunnelIngressLSRId mplsTunnelInstance
SNMPv2-CONF MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP
SNMPv2-SMI Counter32 Counter64 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks Unsigned32
SNMPv2-TC RowStatus StorageType TimeStamp TruthValue
Net-SNMP examples using the juniper MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'JNX-MPLS-TE-P2MP-STD-MIB' -M '/opt/observium/mibs/juniper:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'JNX-MPLS-TE-P2MP-STD-MIB::jnxMplsTeP2mpStdMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'JNX-MPLS-TE-P2MP-STD-MIB' -M '/opt/observium/mibs/juniper:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'JNX-MPLS-TE-P2MP-STD-MIB::jnxMplsTeP2mpStdMIB'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (54)
jnxMplsTeP2mpStdMIB
.1.3.6.1.4.1.2636.5.7.1
jnxMplsTeP2mpNotifications
.1.3.6.1.4.1.2636.5.7.1.0
jnxMplsTeP2mpScalars
.1.3.6.1.4.1.2636.5.7.1.1
jnxMplsTeP2mpTunnelConfigured
SNMPv2-SMIUnsigned32
 .1.3.6.1.4.1.2636.5.7.1.1.1
jnxMplsTeP2mpTunnelActive
SNMPv2-SMIUnsigned32
 .1.3.6.1.4.1.2636.5.7.1.1.2
jnxMplsTeP2mpTunnelTotalMaxHops
SNMPv2-SMIUnsigned32
 .1.3.6.1.4.1.2636.5.7.1.1.3
jnxMplsTeP2mpObjects
.1.3.6.1.4.1.2636.5.7.1.2
jnxMplsTeP2mpTunnelTable
.1.3.6.1.4.1.2636.5.7.1.2.1
jnxMplsTeP2mpTunnelEntry
.1.3.6.1.4.1.2636.5.7.1.2.1.1
jnxMplsTeP2mpTunnelP2mpIntegrity r/w
SNMPv2-TCTruthValue
 .1.3.6.1.4.1.2636.5.7.1.2.1.1.2
jnxMplsTeP2mpTunnelBranchRole r/w
Enumeration
 .1.3.6.1.4.1.2636.5.7.1.2.1.1.3
jnxMplsTeP2mpTunnelP2mpXcIndex
MPLS-LSR-STD-MIBMplsIndexType
 .1.3.6.1.4.1.2636.5.7.1.2.1.1.4
jnxMplsTeP2mpTunnelRowStatus r/w
SNMPv2-TCRowStatus
 .1.3.6.1.4.1.2636.5.7.1.2.1.1.5
jnxMplsTeP2mpTunnelStorageType r/w
SNMPv2-TCStorageType
 .1.3.6.1.4.1.2636.5.7.1.2.1.1.6
jnxMplsTeP2mpTunnelSubGroupIDNext
Unsigned32
 .1.3.6.1.4.1.2636.5.7.1.2.2
jnxMplsTeP2mpTunnelDestTable
.1.3.6.1.4.1.2636.5.7.1.2.3
jnxMplsTeP2mpTunnelDestEntry
.1.3.6.1.4.1.2636.5.7.1.2.3.1
jnxMplsTeP2mpTunnelDestSrcSubGroupOriginType
INET-ADDRESS-MIBInetAddressType
 .1.3.6.1.4.1.2636.5.7.1.2.3.1.1
jnxMplsTeP2mpTunnelDestHopTableIndex r/w
MPLS-TC-STD-MIBMplsPathIndexOrZero
 .1.3.6.1.4.1.2636.5.7.1.2.3.1.10
jnxMplsTeP2mpTunnelDestPathInUse r/w
MPLS-TC-STD-MIBMplsPathIndexOrZero
 .1.3.6.1.4.1.2636.5.7.1.2.3.1.11
jnxMplsTeP2mpTunnelDestCHopTableIndex
MPLS-TC-STD-MIBMplsPathIndexOrZero
 .1.3.6.1.4.1.2636.5.7.1.2.3.1.12
jnxMplsTeP2mpTunnelDestARHopTableIndex
MPLS-TC-STD-MIBMplsPathIndexOrZero
 .1.3.6.1.4.1.2636.5.7.1.2.3.1.13
jnxMplsTeP2mpTunnelDestTotalUpTime
SNMPv2-SMITimeTicks
 .1.3.6.1.4.1.2636.5.7.1.2.3.1.14
jnxMplsTeP2mpTunnelDestInstanceUpTime
SNMPv2-SMITimeTicks
 .1.3.6.1.4.1.2636.5.7.1.2.3.1.15
jnxMplsTeP2mpTunnelDestPathChanges
SNMPv2-SMICounter32
 .1.3.6.1.4.1.2636.5.7.1.2.3.1.16
jnxMplsTeP2mpTunnelDestLastPathChange
SNMPv2-SMITimeTicks
 .1.3.6.1.4.1.2636.5.7.1.2.3.1.17
jnxMplsTeP2mpTunnelDestCreationTime
SNMPv2-TCTimeStamp
 .1.3.6.1.4.1.2636.5.7.1.2.3.1.18
jnxMplsTeP2mpTunnelDestStateTransitions
SNMPv2-SMICounter32
 .1.3.6.1.4.1.2636.5.7.1.2.3.1.19
jnxMplsTeP2mpTunnelDestSrcSubGroupOrigin
OctetString
 .1.3.6.1.4.1.2636.5.7.1.2.3.1.2
jnxMplsTeP2mpTunnelDestDiscontinuityTime
SNMPv2-TCTimeStamp
 .1.3.6.1.4.1.2636.5.7.1.2.3.1.20
jnxMplsTeP2mpTunnelDestAdminStatus r/w
Enumeration
 .1.3.6.1.4.1.2636.5.7.1.2.3.1.21
jnxMplsTeP2mpTunnelDestOperStatus
Enumeration
 .1.3.6.1.4.1.2636.5.7.1.2.3.1.22
jnxMplsTeP2mpTunnelDestRowStatus r/w
SNMPv2-TCRowStatus
 .1.3.6.1.4.1.2636.5.7.1.2.3.1.23
jnxMplsTeP2mpTunnelDestStorageType r/w
SNMPv2-TCStorageType
 .1.3.6.1.4.1.2636.5.7.1.2.3.1.24
jnxMplsTeP2mpTunnelDestSrcSubGroupID
Unsigned32
 .1.3.6.1.4.1.2636.5.7.1.2.3.1.3
jnxMplsTeP2mpTunnelDestSubGroupOriginType
INET-ADDRESS-MIBInetAddressType
 .1.3.6.1.4.1.2636.5.7.1.2.3.1.4
jnxMplsTeP2mpTunnelDestSubGroupOrigin
OctetString
 .1.3.6.1.4.1.2636.5.7.1.2.3.1.5
jnxMplsTeP2mpTunnelDestSubGroupID
Unsigned32
 .1.3.6.1.4.1.2636.5.7.1.2.3.1.6
jnxMplsTeP2mpTunnelDestDestinationType
INET-ADDRESS-MIBInetAddressType
 .1.3.6.1.4.1.2636.5.7.1.2.3.1.7
jnxMplsTeP2mpTunnelDestDestination
OctetString
 .1.3.6.1.4.1.2636.5.7.1.2.3.1.8
jnxMplsTeP2mpTunnelDestBranchOutSegment
MPLS-LSR-STD-MIBMplsIndexType
 .1.3.6.1.4.1.2636.5.7.1.2.3.1.9
jnxMplsTeP2mpTunnelBranchPerfTable
.1.3.6.1.4.1.2636.5.7.1.2.4
jnxMplsTeP2mpTunnelBranchPerfEntry
.1.3.6.1.4.1.2636.5.7.1.2.4.1
jnxMplsTeP2mpTunnelBranchPerfBranch
MPLS-LSR-STD-MIBMplsIndexType
 .1.3.6.1.4.1.2636.5.7.1.2.4.1.1
jnxMplsTeP2mpTunnelBranchPerfPackets
SNMPv2-SMICounter32
 .1.3.6.1.4.1.2636.5.7.1.2.4.1.2
jnxMplsTeP2mpTunnelBranchPerfHCPackets
SNMPv2-SMICounter64
 .1.3.6.1.4.1.2636.5.7.1.2.4.1.3
jnxMplsTeP2mpTunnelBranchPerfErrors
SNMPv2-SMICounter32
 .1.3.6.1.4.1.2636.5.7.1.2.4.1.4
jnxMplsTeP2mpTunnelBranchPerfBytes
SNMPv2-SMICounter32
 .1.3.6.1.4.1.2636.5.7.1.2.4.1.5
jnxMplsTeP2mpTunnelBranchPerfHCBytes
SNMPv2-SMICounter64
 .1.3.6.1.4.1.2636.5.7.1.2.4.1.6
jnxMplsTeP2mpTunnelBranchDiscontinuityTime
SNMPv2-TCTimeStamp
 .1.3.6.1.4.1.2636.5.7.1.2.4.1.7
jnxMplsTeP2mpTunnelNotificationEnable r/w
SNMPv2-TCTruthValue
 .1.3.6.1.4.1.2636.5.7.1.2.5
jnxMplsTeP2mpConformance
.1.3.6.1.4.1.2636.5.7.1.3
jnxMplsTeP2mpGroups
.1.3.6.1.4.1.2636.5.7.1.3.1
jnxMplsTeP2mpCompliances
.1.3.6.1.4.1.2636.5.7.1.3.2
Dependencies (17) 9 direct · 8 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Dependency-first compile order
  1. SNMPv2-SMIrfc
  2. SNMPv2-TCrfc
  3. DIFFSERV-DSCP-TCrfc
  4. IANAifType-MIBrfc
  5. SNMPv2-CONFrfc
  6. SNMPv2-MIBrfc
  7. IF-MIBrfc
  8. INET-ADDRESS-MIBrfc
  9. INTEGRATED-SERVICES-MIBrfc
  10. DIFFSERV-MIBrfc
  11. JUNIPER-SMIjuniper
  12. JUNIPER-EXPERIMENT-MIBjuniper
  13. IANA-ADDRESS-FAMILY-NUMBERS-MIBrfc
  14. MPLS-TC-STD-MIBrfc
  15. MPLS-LSR-STD-MIBrfc
  16. SNMP-FRAMEWORK-MIBrfc
  17. MPLS-TE-STD-MIBrfc
  18. JNX-MPLS-TE-P2MP-STD-MIBjuniperselected
Conformance Groups (3)
jnxMplsTeP2mpGeneralGroup
jnxMplsTeP2mpTunnelConfigured jnxMplsTeP2mpTunnelActive jnxMplsTeP2mpTunnelTotalMaxHops jnxMplsTeP2mpTunnelP2mpIntegrity jnxMplsTeP2mpTunnelBranchRole jnxMplsTeP2mpTunnelP2mpXcIndex jnxMplsTeP2mpTunnelRowStatus jnxMplsTeP2mpTunnelStorageType jnxMplsTeP2mpTunnelSubGroupIDNext jnxMplsTeP2mpTunnelDestBranchOutSegment jnxMplsTeP2mpTunnelDestHopTableIndex jnxMplsTeP2mpTunnelDestPathInUse jnxMplsTeP2mpTunnelDestCHopTableIndex jnxMplsTeP2mpTunnelDestARHopTableIndex jnxMplsTeP2mpTunnelDestTotalUpTime jnxMplsTeP2mpTunnelDestInstanceUpTime jnxMplsTeP2mpTunnelDestPathChanges jnxMplsTeP2mpTunnelDestLastPathChange jnxMplsTeP2mpTunnelDestCreationTime jnxMplsTeP2mpTunnelDestStateTransitions jnxMplsTeP2mpTunnelDestDiscontinuityTime jnxMplsTeP2mpTunnelDestAdminStatus jnxMplsTeP2mpTunnelDestOperStatus jnxMplsTeP2mpTunnelDestRowStatus jnxMplsTeP2mpTunnelDestStorageType jnxMplsTeP2mpTunnelBranchPerfPackets jnxMplsTeP2mpTunnelBranchPerfHCPackets jnxMplsTeP2mpTunnelBranchPerfErrors jnxMplsTeP2mpTunnelBranchPerfBytes jnxMplsTeP2mpTunnelBranchPerfHCBytes jnxMplsTeP2mpTunnelBranchDiscontinuityTime jnxMplsTeP2mpTunnelNotificationEnable
Collection of objects needed for MPLS P2MP.
 .1.3.6.1.4.1.2636.5.7.1.3.1.1
jnxMplsTeP2mpNotifGroup
jnxMplsTeP2mpTunnelDestUp jnxMplsTeP2mpTunnelDestDown
Notifications implemented in this module.
 .1.3.6.1.4.1.2636.5.7.1.3.1.2
jnxMplsTeP2mpScalarGroup
jnxMplsTeP2mpTunnelConfigured jnxMplsTeP2mpTunnelActive jnxMplsTeP2mpTunnelTotalMaxHops
Scalar objects needed to implement P2MP MPLS tunnels.
 .1.3.6.1.4.1.2636.5.7.1.3.1.3
Compliance Statements (2)

OID .1.3.6.1.4.1.2636.5.7.1.3.2.1
Compliance statement for agents that provide full support
for MPLS-TE-P2MP-STD-MIB. Such devices can be monitored and
also be configured using this MIB module.
The Module is implemented with support for read-create and
read-write. In other words, both monitoring and
configuration are available when using this
MODULE-COMPLIANCE.
Required groups
mandatory jnxMplsTeP2mpGeneralGroup
mandatory jnxMplsTeP2mpNotifGroup
mandatory jnxMplsTeP2mpScalarGroup
Object refinements
ObjectAccessSyntaxDescription
jnxMplsTeP2mpTunnelRowStatus
SNMPv2-TCRowStatus
active(1)
Support for createAndWait and notInService is not
required.

OID .1.3.6.1.4.1.2636.5.7.1.3.2.2
Compliance statement for agents that provide read-only
support for MPLS-TE-P2MP-STD-MIB. Such devices can only be
monitored using this MIB module.
The Module is implemented with support for read-only. In
other words, only monitoring is available by implementing
this MODULE-COMPLIANCE.
Required groups
mandatory jnxMplsTeP2mpGeneralGroup
mandatory jnxMplsTeP2mpScalarGroup
mandatory jnxMplsTeP2mpNotifGroup
Object refinements
ObjectAccessSyntaxDescription
jnxMplsTeP2mpTunnelP2mpIntegrity readonly
Write access is not required.
jnxMplsTeP2mpTunnelBranchRole readonly
Write access is not required.
jnxMplsTeP2mpTunnelP2mpXcIndex readonly
Write access is not required.
jnxMplsTeP2mpTunnelRowStatus readonly
SNMPv2-TCRowStatus
active(1)
Write access is not required, and active(1) is the
only status that needs to be supported.
jnxMplsTeP2mpTunnelStorageType readonly
Write access is not required.
jnxMplsTeP2mpTunnelDestHopTableIndex readonly
Write access is not required.
jnxMplsTeP2mpTunnelDestPathInUse readonly
Write access is not required.
jnxMplsTeP2mpTunnelDestAdminStatus readonly
Write access is not required.
jnxMplsTeP2mpTunnelDestRowStatus readonly
SNMPv2-TCRowStatus
active(1)
Write access is not required, and active(1) is the
only status that needs to be supported.
jnxMplsTeP2mpTunnelDestStorageType readonly
Write access is not required.
Notifications / Traps (2)
NameOIDDescription
jnxMplsTeP2mpTunnelDestUp
.1.3.6.1.4.1.2636.5.7.1.0.1
This notification is generated when a
mplsTeP2mpTunnelDestOperStatus object for one of the
destinations of one of the configured tunnels is about to
leave the down(2) state and transition into some other
state. This other state is indicated by the included value
of mplsTeP2mpTunnelDestOperStatus.

This reporting of state transitions mirrors mplsTunnelUp.
jnxMplsTeP2mpTunnelDestDown
.1.3.6.1.4.1.2636.5.7.1.0.2
This notification is generated when a
mplsTeP2mpTunnelDestOperStatus object for one of the
destinations of one of the configured tunnels is about to
enter the down(2) state from some other state. This other
state is indicated by the included value of
mplsTeP2mpTunnelDestOperStatus.

This reporting of state transitions mirrors mplsTunnelDown.