JETDIRECT3-MIB Table View

A list of ieee8023MacEntry entries.

ieee8023MacEntry row .1.3.6.1.4.1.11.2.4.1.1.1

An entry containing the hp ieee8023 extentions.

Indexes

ieee8023MacIndex

Column	Syntax	OID
ieee8023MacIndex The index value which uniquely identifies the interface/port to which this entry is applicable. The interface/port identified by a particular value of this index is the same interface/port as identified by the same val…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.4.1.1.1.1
ieee8023MacTransmitteds The number of frames successfully transmitted.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.4.1.1.1.2
ieee8023MacNotTransmitteds The number of frames not transmitted.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.4.1.1.1.3
ieee8023MacDeferreds Number of frames which were successfully transmitted after a deferral. If any collisions occurred before transmission, xmtDeferredTransmission isn't incremented.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.4.1.1.1.4
ieee8023MacCollisions Total number of transmit attempts that were retransmitted due to collisions, and are subsequently transmitted successfully.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.4.1.1.1.5
ieee8023MacSingleCollisions Number of transmit attempts that are involved in a single collision, and are subsequently transmitted successfully.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.4.1.1.1.6
ieee8023MacMultipleCollisions Number of transmit attempts that are involved in between one and fifteen collision attempts, and are subsequently transmitted successfully.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.4.1.1.1.7
ieee8023MacExcessCollisions The number of transmits that occur after more than 15 collisions, and are subsequently transmitted successfully.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.4.1.1.1.8
ieee8023MacLateCollisions The number of collisions that occurred after one end-to-end frame propagation delay.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.4.1.1.1.9
ieee8023MacCarrierLostErrors Number of times that carrier sense was lost when attempting to transmit.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.4.1.1.1.10
ieee8023MacNoHeartBeatErrors The number of times the MAU failed to assert SQE after transmitting a packet.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.4.1.1.1.11
ieee8023MacFramesReceiveds The number of frames successfully received.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.4.1.1.1.12
ieee8023MacUndeliverableFramesReceiveds The number of frames received that could not be delivered because the software buffer was overrun when frames were sent faster than they could be received.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.4.1.1.1.13
ieee8023MacCrcErrors The number of Cyclical Redundancy Check (CRC) errors detected.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.4.1.1.1.14
ieee8023MacAlignmentErrors The number of frames received that were both misaligned and had bad CRC.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.4.1.1.1.15
ieee8023MacResourceErrors The number of frames received that were lost due to lack of resources.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.4.1.1.1.16
ieee8023MacControlFieldErrors The number of frames received with errors in the control field.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.4.1.1.1.17
ieee8023MacUnknownProtocolErrors The number frames dropped because the type field or sap field referenced an invalid protocol.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.4.1.1.1.18
ieee8023MacMulticastsAccepteds Number of accepted muliticast addresses.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.4.1.1.1.19
ieee8023MacInfiniteDeferrals The number of frames not transmitted successfully due to excessive number of deferrals.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.4.1.1.1.20
ieee8023MacUnderflowErrors The number of frames not transmitted successfully because an underflow occurred on the transmit.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.4.1.1.1.21
ieee8023MacNoResources The number of frames not transmitted successfully because the MAC lacked resources to handle the frame.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.4.1.1.1.22
ieee8023MacLengthErrors The number of frames received that have length errors.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.4.1.1.1.23

The 802.3 multicast address table.

ieee8023MacMcaEntry row .1.3.6.1.4.1.11.2.4.1.2.1

Entries in the ieee8023MacMcaTable.

Indexes

ieee8023MacMcaIndex

Column	Syntax	OID
ieee8023MacMcaIndex The index corresponding to a particular instance in the ieee8023MacMcaTable.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.4.1.2.1.1
ieee8023MacMcaAddress The multicast address of a particular instance in the ieee8023McaTable.	OctetString	.1.3.6.1.4.1.11.2.4.1.2.1.2

A list of ieee8025MacEntry entries.

ieee8025MacEntry row .1.3.6.1.4.1.11.2.4.2.1.1

An entry containing the hp ieee8025 extentions.

Indexes

ieee8025MacIndex

Column	Syntax	OID
ieee8025MacIndex The index value which uniquely identifies the interface/port to which this entry is applicable. The interface/port identified by a particular value of this index is the same interface/port as identified by the same val…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.4.2.1.1.1
ieee8025MacTransmitteds The number of frames successfully transmitted.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.4.2.1.1.2
ieee8025MacUnderflowErrors The number of frames not transmitted due to underflow errors.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.4.2.1.1.3
ieee8025MacNoResources The number of frames which were not transmitted due to no outbound resources.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.4.2.1.1.4
ieee8025MacFramesReceiveds Total number of frames received.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.4.2.1.1.5
ieee8025MacLineErrors Number of received line error frames.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.4.2.1.1.6
ieee8025MacBurstErrors Number of received burst errors.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.4.2.1.1.7
ieee8025MacFSSetErrors The number of received FS set errors.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.4.2.1.1.8
ieee8025MacCongestions The number of received congestion packets.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.4.2.1.1.9
ieee8025MacLostFrameErrors Number of received lost frame errors.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.4.2.1.1.10
ieee8025MacFrameCopiedErrors The number of received frame copied errors.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.4.2.1.1.11
ieee8025MacTooLongErrors The number received too long errors.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.4.2.1.1.12
ieee8025MacLengthErrors The number of recevied length errors.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.4.2.1.1.13
ieee8025MacOverflowErrors The number of received overflow errors.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.4.2.1.1.14
ieee8025MacTokenErrors The number of token errors.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.4.2.1.1.15

The 802.5 multicast address table.

ieee8025MacMcaEntry row .1.3.6.1.4.1.11.2.4.2.2.1

Entries in the ieee8025MacMcaTable.

Indexes

ieee8025MacMcaIndex

Column	Syntax	OID
ieee8025MacMcaIndex The index corresponding to a particular instance in the ieee8025MacMcaTable.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.4.2.2.1.1
ieee8025MacMcaAddress The multicast address of a particular instance in the ieee8025McaTable.	OctetString	.1.3.6.1.4.1.11.2.4.2.2.1.2

A table of all the lines which the card prints on the self-test page.

npSysStatusPageEntry row .1.3.6.1.4.1.11.2.4.3.1.12.1

An entry containing one line of the status page.

Indexes

npSysStatusPageIndex

Column	Syntax	OID
npSysStatusPageIndex The index value of this entry in the table.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.4.3.1.12.1.1
npSysStatusPageText The text of one line of the card status. This is the same text that is shown on the printer's selftest page. The text is localized.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.11.2.4.3.1.12.1.2

List of access addresses and masks.

npCfgAccessListEntry row .1.3.6.1.4.1.11.2.4.3.5.9.1

Each entry contains an access address and mask.

Indexes

npCfgAccessListIndex

Column	Syntax	OID
npCfgAccessListIndex Index to the configuration access list table.	Integer32 Constraints: range: 0-9	.1.3.6.1.4.1.11.2.4.3.5.9.1.1
npCfgAccessListAddress Address to compare with after applying the wildcard to the requestor's address.	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.11.2.4.3.5.9.1.2
npCfgAccessListAddrMask Address mask used to help determine whether or not a given IP address is allowed access to the card. An IP address is allowed access if (Addr & AddrMask) == (IP & AddrMask).	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.11.2.4.3.5.9.1.3

The LAN card's error log.

npEltErrorLogEntry row .1.3.6.1.4.1.11.2.4.3.9.1.1

The LAN card's error log table entries.

Indexes

npEltErrIndex

Column	Syntax	OID
npEltErrIndexobsolete The index that uniquely identifies an error log entry. Starting with firmware release X.20.06 and subsequent releases, this object is obsolete as it provides no relevant data for the new hardware archit…	Integer32 Constraints: range: 0-255	.1.3.6.1.4.1.11.2.4.3.9.1.1.1
npEltErrErrorIdobsolete Identification for this error. Starting with firmware release X.20.06 and subsequent releases, this object is obsolete as it provides no relevant data for the new hardware architecture. No current support…	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.11.2.4.3.9.1.1.2
npEltErrErrorParamobsolete Error Parameter value. Starting with firmware release X.20.06 and subsequent releases, this object is obsolete as it provides no relevant data for the new hardware architecture. No current supported appli…	Unsigned32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.11.2.4.3.9.1.1.3
npEltErrTimeStampobsolete Time in timer ticks when error log entry was made. Starting with firmware release X.20.06 and subsequent releases, this object is obsolete as it provides no relevant data for the new hardware architecture…	RFC1155-SMITimeTicks Constraints: range: 0-64	.1.3.6.1.4.1.11.2.4.3.9.1.1.4

A list of npIpxServerConn entries.

npIpxServerConnEntry row .1.3.6.1.4.1.11.2.4.3.10.11.1

An entry contains the status of a file server connection. Each
entry indicates the file server dynamically connected in the given
slot, the connection status, NCP status, and NDS status.

To set a new serve…

Indexes

npIpxServerConnIndex

Column	Syntax	OID
npIpxServerConnIndex The index value which uniquely identifies the server connection to which this entry is applicable.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.4.3.10.11.1.1
npIpxServerConnMode The operating mode of the server.	Enumeration Enumerated Values: 1 not-connected 2 qserver-bindery 3 rprinter 4 qserver-nds	.1.3.6.1.4.1.11.2.4.3.10.11.1.2
npIpxServerConnName The name of the server.	OctetStringr/w Constraints: range: 0-48	.1.3.6.1.4.1.11.2.4.3.10.11.1.3
npIpxServerConnStatus The RCFG connection status of the server.	Integer32 Constraints: range: 0-255	.1.3.6.1.4.1.11.2.4.3.10.11.1.4
npIpxServerConnNcpStatus The last NCP code of the server.	Integer32 Constraints: range: 0-255	.1.3.6.1.4.1.11.2.4.3.10.11.1.5
npIpxServerConnNdsStatus The last NDS code of the server.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.4.3.10.11.1.6

A table of AppleTalk network configuration information.

npAtkNetConfigEntry row .1.3.6.1.4.1.11.2.4.3.19.3.1

Each row of the table gives the configuratin information for an
entity bound to a socket

Indexes

npAtkNetConfigIndex

Column	Syntax	OID
npAtkNetConfigName AppleTalk Name of the Peripheral. The actual peripheral name stored on the periperal is used as the AppleTalk node name.	OctetString Constraints: range: 0-33 range: 1-10	.1.3.6.1.4.1.11.2.4.3.19.3.1.1
npAtkNetConfigZone Apple Talk Zone to which the periphral belongs. A zone is an arbitrary subset of nodes within an AppleTalk internet.	OctetString Constraints: range: 0-33	.1.3.6.1.4.1.11.2.4.3.19.3.1.2
npAtkNetConfigType The type associated with the socket. This is meant to be a useful description of what process is bound to the socket. ie LaserWriter print aplication, SNMP Agent, Zoner Responder	OctetString Constraints: range: 0-33 range: 5-3600	.1.3.6.1.4.1.11.2.4.3.19.3.1.3
npAtkNetConfigNet The AppleTalk network to which the node is connected.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.11.2.4.3.19.3.1.4
npAtkNetConfigNode The number assigned to this entity to uniquely identify it on the AppleTalk network.	Integer32 Constraints: range: 0-255	.1.3.6.1.4.1.11.2.4.3.19.3.1.5
npAtkNetConfigSocket A socket is an addressable entity within a node connected to an AppleTalk network. The entity may be AppleTalk software process or other clients such as: LaserWriter, Zoner Responder, etc	Integer32 Constraints: range: 0-255	.1.3.6.1.4.1.11.2.4.3.19.3.1.6
npAtkNetConfigIndex A unique value for each AppleTalk configuration interface.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.4.3.19.3.1.7

Encrypted interface to the WEP Keys.

npSecurityDot11EncryptedWEPKeyEntry row .1.3.6.1.4.1.11.2.4.3.20.7.1

Each row of the table gives a WEP Key

Indexes

No indexes recorded

Column	Syntax	OID
npSecurityDot11EncryptedWEPKey The encrypted WEP Key value. Use the npSecurityDot11PublicKey to encrypt this value. Setting this object will cause the card to reconfigure.	OctetStringr/w Constraints: range: 70-125	.1.3.6.1.4.1.11.2.4.3.20.7.1.2

List of discovered SSIDs.

npSecurityDot11SSIDEntry row .1.3.6.1.4.1.11.2.4.3.20.9.1

Each row of the table gives a discovered SSID value.

Indexes

No indexes recorded

Column	Syntax	OID
npSecurityDot11SSID A discovered SSID value.	OctetString Constraints: range: 1-2	.1.3.6.1.4.1.11.2.4.3.20.9.1.2

List of inetTrap destinations to which the agent sends traps.

inetTrapDestinationEntry row .1.3.6.1.4.1.11.2.4.3.22.1.2.1

Entries are inetAddress Specific sequence of trap destination parameters.

Indexes

No indexes recorded

Column	Syntax	OID
inetTrapRowIndex Row Index of the inetTrapDestination table	SNMPv2-SMIInteger32 Constraints: range: 0-1024	.1.3.6.1.4.1.11.2.4.3.22.1.2.1.1
inetTrapRowStatus Individual Row Status 1 - Row is Active - Row is activated and ready. 2 - Not-In-Service - Row is suspended. 3 - Not Ready - Row is not activated and still needs some columnar values to move to ready state. 4 - Create a…	SNMPv2-SMIInteger32r/w Constraints: range: 0-4094	.1.3.6.1.4.1.11.2.4.3.22.1.2.1.2
inetTrapAddressType Protocol family for trap. Possible values: ipv4(1) An IPv4 address as defined by the InetAddressIPv4 textual convention. ipv6(2) An IPv6 address as defined by the Inet…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.4.3.22.1.2.1.3
inetTrapAddress IPv4/IPv6/FQDN address of trap destination node.	OctetStringr/w	.1.3.6.1.4.1.11.2.4.3.22.1.2.1.4
inetTrapPort Port number of the inetTrap Destination to which the trap is sent.	SNMPv2-SMIInteger32r/w Constraints: range: 20-70	.1.3.6.1.4.1.11.2.4.3.22.1.2.1.5
inetTrapCommunityName Trap community name specified in the trap packet.	OctetStringr/w Constraints: range: -40-10	.1.3.6.1.4.1.11.2.4.3.22.1.2.1.6
inetTrapVersion Trap version, one of the following 0 = snmpV1 1 = snmpV2 3 = Inform Default is 1 = snmpV2. This value remains persistent through a powercycle.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.4.3.22.1.2.1.7
inetTrapStyle This OID is read-write. If the user wants to receive only the PML traps, then trapStyle can be set to 1. If the user wants to receive only APS and General or NOT-READY-DESTINATION-PRINT-ENGINE traps, then trapStyle can …	Enumerationr/w Enumerated Values: 1 selectable-pml-traps 2 aps-and-general-or-nrdpe-traps 3 both-of-the-above	.1.3.6.1.4.1.11.2.4.3.22.1.2.1.8
inetTrapPMLOids This OID is a read-write. This will have tokens of PML trappable OIDs. Each token (OID) will be separated by a semi-colon. If a trap destination entry is registered for only APS and general/NRDPE traps, then the pmlTrap…	OctetStringr/w	.1.3.6.1.4.1.11.2.4.3.22.1.2.1.9
inetTrapErrorValue Gives the error value in case if the server is not able to send the traps to the configured trapDestination entry. It will be set to below defined error values if there the agent finds any error while dispatching a trap…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.4.3.22.1.2.1.10

Protocol specific list of destinations
to which the agent sends traps.

trapDestinationEntry row .1.3.6.1.4.1.11.2.13.1.2.1

Entries are a protocol specific sequence of trap
destination parameters.

Indexes

trapAddrFamily

Column	Syntax	OID
trapAddrFamily Protocol family for trap. Possible values: 0 not_SET 1 af_UDP 2 af_IPX 3 af_LLC 4 af_DDP	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.13.1.2.1.1
trapAddrIp Ip address of trap destination.	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.11.2.13.1.2.1.2
trapPort Host port to which traps are sent.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.13.1.2.1.3
trapCommunityName Trap community name specified in the trap packet.	OctetStringr/w	.1.3.6.1.4.1.11.2.13.1.2.1.4
trapVersion Trap version, one of the following 0 = snmpV1 1 = snmpV2 3 = Inform Default is 0 = snmpV1. This value remains persistent through a powercycle.	SNMPv2-SMIInteger32r/w Constraints: range: 1-100	.1.3.6.1.4.1.11.2.13.1.2.1.5
trapBaseTimeout Applicable only if trapVersion is set to Inform. Units are 1/10 second intervals. Default is 2 corresponding to 200 milliseconds. This value corresponds to the time of the first retry following the initial inform requ…	SNMPv2-SMIInteger32r/w Constraints: range: 0-46	.1.3.6.1.4.1.11.2.13.1.2.1.6
trapRetryNum This is the maximum number of inform retries that will be sent to this destination. Retries are sent if no inform reply is received within the timeout value. The timeout value is calculated as described under trapBase…	SNMPv2-SMIInteger32r/w Constraints: range: 0-46	.1.3.6.1.4.1.11.2.13.1.2.1.7
trapDestOwner This OID is read only. It is used to monitor the insertion and removal of a trap destination entry. It is controlled by the corresponding BRADY and old style PML registrations.	Enumeration Enumerated Values: 1 oldStylePML 2 brady 3 oldStyleAndBRADY Constraints: range: 0-46	.1.3.6.1.4.1.11.2.13.1.2.1.8
pmlTrapList This OID is read only. It is used to monitor the insertion and removal of an old style PML trap entry. It is controlled by the corresponding old style PML registrations. If a trap destination entry is registered for onl…	ObjectIdentifier Constraints: range: 0-46	.1.3.6.1.4.1.11.2.13.1.2.1.9

A table of firmware downloads to this device.  There will
at any time be either 0 or 1 rows in this table, and the
only valid index for this table is 1.  It is only a table
so that we may take advantage of the RowStatus textual
convention for configuring the download parameters.

hpicfDownloadEntry row .1.3.6.1.4.1.11.2.14.11.1.3.1.1

The row in the hpicfDownloadTable containing the download
parameters.

Indexes

hpicfDownloadIndex

Column	Syntax	OID
hpicfDownloadIndex The index which uniquely identifies this row. The only legal value for this object is 1.	Enumeration Enumerated Values: 1 dlInstance	.1.3.6.1.4.1.11.2.14.11.1.3.1.1.1
hpicfDownloadTAddress The transport address of the node to download firmware from, formatted according to the value of hpicfDownloadTDomain. An attempt to modify this value will fail if the associated hpicfDownloadStatus objec…	OctetStringr/w	.1.3.6.1.4.1.11.2.14.11.1.3.1.1.4
hpicfDownloadTDomain The kind of transport service to be used for the download. Currently supports snmpUDPDomain and snmpIPXDomain. An attempt to modify this value will fail if the associated hpicfDownloadStatus object would…	ObjectIdentifierr/w	.1.3.6.1.4.1.11.2.14.11.1.3.1.1.5
hpicfDownloadFilename Filename and path of file to download (maximum length of 63 characters + NULL). An attempt to modify this value will fail if the associated hpicfDownloadStatus object would be equal to 'active' both befor…	SNMPv2-TCDisplayStringr/w Constraints: range: 60-36000 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.11.2.14.11.1.3.1.1.6
hpicfDownloadErrorStatus Status of download. The first seven codes are equal to the codes defined by the TFTP protocol. 'notDefined' is the same as TFTP protocol error 0. 'corruptFile' means that the agent detected a problem with the downloa…	Enumeration Enumerated Values: 1 fileNotFound 2 accessViolation 3 diskFull 4 illegalOperation 5 unknownTID 6 fileExists 7 noSuchUser 8 notDefined 9 corruptFile 10 noServer 11 tftpTimeout 12 hardwareError 13 success 14 inProgress 15 idle 16 erasing 17 incomplete Constraints: range: 60-36000	.1.3.6.1.4.1.11.2.14.11.1.3.1.1.8
hpicfDownloadErrorText A textual description of the current error status of the firmware download.	SNMPv2-TCDisplayString Constraints: range: 60-36000 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.11.2.14.11.1.3.1.1.9
hpicfDownloadStatus The status of this download entry. This object may not be set to 'active' unless the following columnar objects exist in this row: hpicfDownloadOwnerAddress, hpicfDownloadOwnerDomain, hpicfDownloadTAddress, hpicfDownlo…	Enumerationr/w Enumerated Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Constraints: range: 60-36000	.1.3.6.1.4.1.11.2.14.11.1.3.1.1.10