ISM-STORAGE-SVC-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
7
Rows
7
Columns
63
.1.3.6.1.4.1.34774.4.1.19.8.7 · 1 row entry · 9 columns
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwStorageFCPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ISM-STORAGE-SVC-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ISM-STORAGE-SVC-MIB::hwStorageFCPortTable'
This table provides information about FC ports.
hwStorageFCPortEntry row .1.3.6.1.4.1.34774.4.1.19.8.7.1
A table containing the part component.
Column Syntax OID
Index to the FC host port.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.34774.4.1.19.8.7.1.1
Index to the board of the FC host port.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.34774.4.1.19.8.7.1.2
ID of the FC host port..
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.34774.4.1.19.8.7.1.3
Status of the FC host port.
The value can be:
0: Disconnected
1: Connected
2: Faulty
Enumeration
Enumerated Values:
0linkdown
1linkup
2fault
.1.3.6.1.4.1.34774.4.1.19.8.7.1.4
Working Rate of the FC host port, (unit: 1000Mbit/s). The value can be:
0: Auto
1: GBPS-1
2: GBPS-2
4: GBPS-4
8: GBPS-8
16: GBPS-16
The Current rate can be 1 Gbit/s, 2 Gbit/s, 4 Gbit/s, 8 Gbit/s, or 16 Gbit/s. The conve…
Enumerationr/w
Enumerated Values:
0auto
1gbps1
2gbps2
4gbps4
8gbps8
16gbps16
.1.3.6.1.4.1.34774.4.1.19.8.7.1.5
Mode of the FC host port. The value can be:
-1: Invalid
0: fabric
1: FC-AL
2: P2P
3: Auto
Enumerationr/w
Enumerated Values:
1fabric
2publicloop
3pointtopoint
.1.3.6.1.4.1.34774.4.1.19.8.7.1.6
WWN of the FC host port.
OctetString .1.3.6.1.4.1.34774.4.1.19.8.7.1.7
Logical type of FC host port. The value can be:
1: service
2: ibc
3: ibs
4: expansion
5: management
6: upsmanagement
8: maintenance
Enumeration
Enumerated Values:
1service
2ibc
3ibs
4expansion
5management
6upsmanagement
8maintenance
.1.3.6.1.4.1.34774.4.1.19.8.7.1.8
Speed rate of FC host port(unit: Mbit/s). If the parameter value is -1, this parameter is invalid.
Enumeration
Enumerated Values:
0auto
1gbps1
2gbps2
4gbps4
8gbps8
16gbps16
.1.3.6.1.4.1.34774.4.1.19.8.7.1.9
.1.3.6.1.4.1.34774.4.1.19.8.8 · 1 row entry · 8 columns
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwStorageSASPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ISM-STORAGE-SVC-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ISM-STORAGE-SVC-MIB::hwStorageSASPortTable'
This table provides information about SAS ports.
hwStorageSASPortEntry row .1.3.6.1.4.1.34774.4.1.19.8.8.1
A table containing the part component.
Column Syntax OID
Index to the SAS host port.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.34774.4.1.19.8.8.1.1
Index to the board of the SAS host port.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.34774.4.1.19.8.8.1.2
ID of the SAS host port.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.34774.4.1.19.8.8.1.3
Status of the SAS host port. The value can be:
0: disconnected
1: connected
2: faulty
Enumeration
Enumerated Values:
0linkdown
1linkup
2fault
.1.3.6.1.4.1.34774.4.1.19.8.8.1.4
Rate of the SAS host port. (unit: 1000 Mbit/s). If the parameter value is -1, this parameter is invalid.
Enumeration
Enumerated Values:
1500gbps15
3000gbps30
6000gbps60
.1.3.6.1.4.1.34774.4.1.19.8.8.1.5
WWN of the SAS host port.
OctetString .1.3.6.1.4.1.34774.4.1.19.8.8.1.6
Logical type of SAShost port. The value can be:
1: service
2: ibc
3: ibs
4: expansion
5: management
6: upsmanagement
8: maintenance
Enumeration
Enumerated Values:
1service
2ibc
3ibs
4expansion
5management
6upsmanagement
8maintenance
.1.3.6.1.4.1.34774.4.1.19.8.8.1.7
Speed rate of SAS host port. The value can be:
1: Gbps15
2: Gbps30
3: Gbps60
Enumeration
Enumerated Values:
1500gbps15
3000gbps30
6000gbps60
.1.3.6.1.4.1.34774.4.1.19.8.8.1.8
.1.3.6.1.4.1.34774.4.1.19.8.9 · 1 row entry · 8 columns
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwStorageISCSIPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ISM-STORAGE-SVC-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ISM-STORAGE-SVC-MIB::hwStorageISCSIPortTable'
This table provides information about iSCSI ports.
hwStorageISCSIPortEntry row .1.3.6.1.4.1.34774.4.1.19.8.9.1
A table containing the part component.
Column Syntax OID
Index to the iSCSI host port.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.34774.4.1.19.8.9.1.1
Index to the board of the iSCSI host port.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.34774.4.1.19.8.9.1.2
ID of the iSCSI host port.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.34774.4.1.19.8.9.1.3
Status of the iSCSI host port. The value can be:
0: disconnected
1: connected
2: faulty
Enumeration
Enumerated Values:
0linkdown
1linkup
2fault
.1.3.6.1.4.1.34774.4.1.19.8.9.1.4
IP address of the iSCSI host port.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.34774.4.1.19.8.9.1.5
Mask of the iSCSI host port.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.34774.4.1.19.8.9.1.6
Bind mode of the iSCSI host port, not used currently.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.34774.4.1.19.8.9.1.7
Logical type of ISCSI host port. The value can be:
1: service
2: ibc
3: ibs
4: expansion
5: management
6: upsmanagement
8: maintenance
Enumeration
Enumerated Values:
1service
2ibc
3ibs
4expansion
5management
6upsmanagement
8maintenance
.1.3.6.1.4.1.34774.4.1.19.8.9.1.8
.1.3.6.1.4.1.34774.4.1.19.8.11 · 1 row entry · 5 columns
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwStorageFrontEndHostPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ISM-STORAGE-SVC-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ISM-STORAGE-SVC-MIB::hwStorageFrontEndHostPortTable'
This table provides basic information about the SAS, FC, iSCSI ports whose performance statistics can be collected.
hwStorageFrontEndHostPortEntry row .1.3.6.1.4.1.34774.4.1.19.8.11.1
A table containing the part component.
Column Syntax OID
Combination index to the host ports.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.34774.4.1.19.8.11.1.1
Physical type of a host port:
0: SAS
1: FC
5: iSCSI
Enumeration
Enumerated Values:
0sas
1fc
5iscsi
.1.3.6.1.4.1.34774.4.1.19.8.11.1.2
Connection state of a host port:
0: link down
1: link up
2: not exist
3: link bad
4: hardware error
5: speed no match
6: enable
7: disable
8: mac error
9: lane no match
Enumeration
Enumerated Values:
0linkdown
1linkup
2fault
3unknown
.1.3.6.1.4.1.34774.4.1.19.8.11.1.3
IP address of a host port. If
OctetString .1.3.6.1.4.1.34774.4.1.19.8.11.1.4
Description of a host port.
OctetString .1.3.6.1.4.1.34774.4.1.19.8.11.1.5
.1.3.6.1.4.1.34774.4.1.19.8.12 · 1 row entry · 16 columns
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwStorageControllerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ISM-STORAGE-SVC-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ISM-STORAGE-SVC-MIB::hwStorageControllerTable'
This table provides basic information about the controller.
hwStorageControllerEntry row .1.3.6.1.4.1.34774.4.1.19.8.12.1
A table containing the part component.
Column Syntax OID
Controller node ID.
Controller node ID = Controller enclosure ID x Number of controllers in the controller enclosure + Controller ID. In controller name 1A, 1 indicates the controller enclosure ID and A indicates the co…
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.34774.4.1.19.8.12.1.1
Controller name
OctetString .1.3.6.1.4.1.34774.4.1.19.8.12.1.2
Controller location
OctetString .1.3.6.1.4.1.34774.4.1.19.8.12.1.3
Controller health status. For details, see:
1 Normal
2 Fault
3 Pre-Fail
4 Partially Broken
5 Degraded
6 Bad Sectors Found
7 Bit Errors Found
8 Consistent
9 Inconsistent
10 Busy
11 No Input
12 Low Battery
13 Single Link …
Enumeration
Enumerated Values:
1normal
2fault
3preFail
4partiallyBroken
5degraded
6badSectorsFound
7bitErrorsFound
8consistent
9inconsistent
10busy
11noInput
12lowBattery
13singleLinkFault
.1.3.6.1.4.1.34774.4.1.19.8.12.1.4
Controller running status. For details, see:
1: Normal
2: Running
3: Not running
4: Not existed
5: Sleep in high temperature
6: Starting
7: Power failure rotection
8: Spin down
9: Started
10: Link Up
11: Link Down
12: P…
Enumeration
Enumerated Values:
1normal
2running
3notRunning
4notExisted
5sleepInHighTemperature
6starting
7powerFailureProtecting
8spinDown
9started
10linkUp
11linkDown
12poweringOn
13poweredOff
14precopy
15copyback
16reconstruction
17expansion
18unformatted
19formatting
20unmapped
21initialSynchronizing
22consistent
23synchronizing
24synchronized
25unsynchronized
26splited
27online
28offline
29locked
30enabled
31disabled
32balancing
33toBeRecoverd
34interrupted
35invalid
36notStart
37queuing
38stopped
39copying
40completed
41paused
42reverseSynchronizing
43activated
44restore
45inactive
46idle
47poweringOff
48charging
49chargingCompleted
50discharging
51upgrading
63runningNormal
64runningFail
.1.3.6.1.4.1.34774.4.1.19.8.12.1.5
Controller software version.
OctetString .1.3.6.1.4.1.34774.4.1.19.8.12.1.6
Controller temperature, unit: degree, not used currently.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.34774.4.1.19.8.12.1.7
The state of controller, master or slave
0: Slave
1: Master
Not used currently.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.34774.4.1.19.8.12.1.8
Controller electronic label.
OctetString .1.3.6.1.4.1.34774.4.1.19.8.12.1.9
Controller PCB version
OctetString .1.3.6.1.4.1.34774.4.1.19.8.12.1.10
Controller BMC version. When the value is empty or
OctetString .1.3.6.1.4.1.34774.4.1.19.8.12.1.11
Controller logical version
OctetString .1.3.6.1.4.1.34774.4.1.19.8.12.1.12
Controller BIOS version
OctetString .1.3.6.1.4.1.34774.4.1.19.8.12.1.13
Controller memory size, unit: MB
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.34774.4.1.19.8.12.1.14
CPU information, composed by four fields: manufacturer, make, model, and frequency.
OctetString .1.3.6.1.4.1.34774.4.1.19.8.12.1.15
Controller voltage, unit: 0.1V.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.34774.4.1.19.8.12.1.16
.1.3.6.1.4.1.34774.4.1.19.9.1 · 1 row entry · 5 columns
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwStorageCacheTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ISM-STORAGE-SVC-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ISM-STORAGE-SVC-MIB::hwStorageCacheTable'
This table provides cache information such as cache ID, cache size, cache high water level, and cache low water level.
hwStorageCacheEntry row .1.3.6.1.4.1.34774.4.1.19.9.1.1
A table containing the part component.
Column Syntax OID
Controller node ID.
Controller node ID = Controller enclosure ID x Number of controllers in the controller enclosure + Controller ID. In controller name 1A, 1 indicates the controller enclosure ID and A indicates the co…
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.34774.4.1.19.9.1.1.1
Cache size (unit: MB).
MBSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.34774.4.1.19.9.1.1.2
Cache high water level.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.34774.4.1.19.9.1.1.3
Cache low water level.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.34774.4.1.19.9.1.1.4
Row status.
1: Active
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.34774.4.1.19.9.1.1.5
.1.3.6.1.4.1.34774.4.1.19.9.4 · 1 row entry · 12 columns
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwStorageLunTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ISM-STORAGE-SVC-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ISM-STORAGE-SVC-MIB::hwStorageLunTable'
This table is used to query the LUN information about a device.
hwStorageLunEntry row .1.3.6.1.4.1.34774.4.1.19.9.4.1
A table containing the part component.
Indexes
Column Syntax OID
ID of the LUN.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.34774.4.1.19.9.4.1.1
Name of the LUN.
OctetString .1.3.6.1.4.1.34774.4.1.19.9.4.1.2
WWN of the LUN.
OctetString .1.3.6.1.4.1.34774.4.1.19.9.4.1.3
ID of the storage pool to which the LUN belongs.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.34774.4.1.19.9.4.1.4
Capacity of the LUN. The unit is KB.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.34774.4.1.19.9.4.1.5
Node id of the owning controller of the LUN.
Controller node ID = Controller enclosure ID x Number of controllers in the controller enclosure + Controller ID. In controller name 1A, 1 indicates the controller enclosure …
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.34774.4.1.19.9.4.1.6
Stripe depth of the LUN. Not used currently.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.34774.4.1.19.9.4.1.7
Write policy of the LUN. The value can be:
1: Write through
2: Write back no mirroring
3: Write back mirroring
4: Write back mandatory nomirroring
5: Write back mandatory mirroring
Enumeration
Enumerated Values:
1writethrough
2writebacknomirroring
3writebackmirroring
4writebackmandatorynomirroring
5writebackmandatorymirroring
.1.3.6.1.4.1.34774.4.1.19.9.4.1.8
Prefetch policy of the LUN. The value can be:
0: Non-prefetch
1: Constant prefetch
2: Variable prefetch
3: Intelligent prefetch
Enumeration
Enumerated Values:
0none
1constant
2variable
3intelligent
.1.3.6.1.4.1.34774.4.1.19.9.4.1.9
Cache prefetch value of the LUN. The cache prefech policy can be:
1. constant prefetch (unit: KB)
2. variable prefetch (unit: times)
3. non-prefetch or intelligent prefetch. If 4294967295 is returned, the value is inval…
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.34774.4.1.19.9.4.1.10
Status of the LUN. The value can be:
1: Normal
2: Faulty
3: Unformatted
4: Formatting
Enumeration
Enumerated Values:
1normal
2fault
3notformat
4formatting
.1.3.6.1.4.1.34774.4.1.19.9.4.1.11
Row status.
1: Active
SNMPv2-TCRowStatus
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.34774.4.1.19.9.4.1.50