ISIS-DRAFT-13-MIB
Monitored by Observium This document describes a management information base for
the IS-IS Routing protocol, as described in ISO 10589,
when it is used to construct routing tables for IP networks,
as described in RFC 1195.
This document defines an experimental portion of the
Management Information Base (MIB) for use with network
management protocols in the Internet community.
This document is based on a 1994 IETF draft by Chris Gunner.
This version has been modified to include MIB-II syntax, to
exclude portions of the protocol that are not relevant to IP,
and to add management support for current practice.
Observium actively monitors this MIB
Observium uses this MIB in discovery or polling workflows on applicable devices.
Routing
Explore Observium network monitoring
- Source file
ISIS-DRAFT-13-MIB- Last revised
- Identity
isisMIB- Base OID
1.3.6.1.3.37
Imported Objects
| IF-MIB | ifName |
| INET-ADDRESS-MIB | InetAddress InetAddressPrefixLength InetAddressType |
| RFC1213-MIB | ifEntry ifIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE (no object page) NOTIFICATION-GROUP (no object page) OBJECT-GROUP (no object page) |
| SNMPv2-SMI | Counter32 experimental Integer32 MODULE-IDENTITY (no object page) NOTIFICATION-TYPE (no object page) OBJECT-IDENTITY (no object page) OBJECT-TYPE (no object page) TimeTicks Unsigned32 |
| SNMPv2-TC | DisplayString RowStatus TestAndIncr TEXTUAL-CONVENTION (no object page) TruthValue |
Net-SNMP examples using the huawei MIB directory Show commands
These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.
Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'ISIS-DRAFT-13-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'ISIS-DRAFT-13-MIB::isisMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ISIS-DRAFT-13-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ISIS-DRAFT-13-MIB::isisMIB'
Objects (230)
Showing 230 of 230 objects
Object legend
Object type
Icons distinguish tables, entry rows, columns, scalars, and structural nodes.
SNMPv2-TCTruthValue
Syntax
Blue badges identify the value syntax. Connected badges read as defining module and convention.
IF-MIBifIndex
Table index
Green identifies an index object; yellow names its module when the index is defined elsewhere.
r/w
deprecated
obsolete
Access and status
r/w means read-write. Grey labels mark definitions retained for compatibility.
OBS ✓
Observium use
The indicator appears only when Observium directly references that object.
ifOperStatus
.1.3.6.1.2.1…
Names and OIDs
Object names link to their detail pages. Hover or focus a linked name or badge for available definition details.
.1.3.6.1.3.37 |
||
.1.3.6.1.3.37.1 |
||
.1.3.6.1.3.37.1.1 |
||
.1.3.6.1.3.37.1.1.1 |
||
.1.3.6.1.3.37.1.1.1.1 |
||
|
Unsigned32
|
.1.3.6.1.3.37.1.1.1.1.1 |
|
.1.3.6.1.3.37.1.1.1.1.10 |
||
.1.3.6.1.3.37.1.1.1.1.11 |
||
.1.3.6.1.3.37.1.1.1.1.12 |
||
|
|
secondsUnsigned16TC
|
.1.3.6.1.3.37.1.1.1.1.13 |
|
bytesUnsigned16TC
|
.1.3.6.1.3.37.1.1.1.1.14 |
|
.1.3.6.1.3.37.1.1.1.1.15 |
||
.1.3.6.1.3.37.1.1.1.1.2 |
||
|
|
Enumeration
|
.1.3.6.1.3.37.1.1.1.1.3 |
|
|
.1.3.6.1.3.37.1.1.1.1.4 |
|
|
Integer32
|
.1.3.6.1.3.37.1.1.1.1.5 |
|
|
secondsInteger32
|
.1.3.6.1.3.37.1.1.1.1.6 |
|
|
secondsUnsigned16TC
|
.1.3.6.1.3.37.1.1.1.1.7 |
|
|
|
secondsUnsigned16TC
|
.1.3.6.1.3.37.1.1.1.1.8 |
.1.3.6.1.3.37.1.1.1.1.9 |
||
.1.3.6.1.3.37.1.1.2 |
||
.1.3.6.1.3.37.1.1.2.1 |
||
.1.3.6.1.3.37.1.1.2.1.1 |
||
.1.3.6.1.3.37.1.1.2.1.2 |
||
.1.3.6.1.3.37.1.1.3 |
||
.1.3.6.1.3.37.1.1.3.1 |
||
.1.3.6.1.3.37.1.1.3.1.1 |
||
.1.3.6.1.3.37.1.1.4 |
||
.1.3.6.1.3.37.1.1.4.1 |
||
.1.3.6.1.3.37.1.1.4.1.1 |
||
.1.3.6.1.3.37.1.1.4.1.2 |
||
.1.3.6.1.3.37.1.1.5 |
||
.1.3.6.1.3.37.1.1.5.1 |
||
.1.3.6.1.3.37.1.1.5.1.1 |
||
.1.3.6.1.3.37.1.1.5.1.2 |
||
.1.3.6.1.3.37.1.1.5.1.3 |
||
.1.3.6.1.3.37.1.1.5.1.4 |
||
.1.3.6.1.3.37.1.1.5.1.5 |
||
.1.3.6.1.3.37.1.1.5.1.6 |
||
.1.3.6.1.3.37.1.1.6 |
||
.1.3.6.1.3.37.1.1.6.1 |
||
.1.3.6.1.3.37.1.1.6.1.1 |
||
.1.3.6.1.3.37.1.1.6.1.2 |
||
.1.3.6.1.3.37.1.1.6.1.3 |
||
.1.3.6.1.3.37.1.1.6.1.4 |
||
.1.3.6.1.3.37.1.1.7 |
||
.1.3.6.1.3.37.1.1.7.1 |
||
.1.3.6.1.3.37.1.1.7.1.1 |
||
.1.3.6.1.3.37.1.1.7.1.2 |
||
.1.3.6.1.3.37.1.1.7.1.3 |
||
.1.3.6.1.3.37.1.1.7.1.4 |
||
.1.3.6.1.3.37.1.10 |
||
.1.3.6.1.3.37.1.10.1 |
||
.1.3.6.1.3.37.1.10.1.1 |
||
.1.3.6.1.3.37.1.10.1.1.1 |
||
.1.3.6.1.3.37.1.10.1.1.10 |
||
.1.3.6.1.3.37.1.10.1.1.2 |
||
.1.3.6.1.3.37.1.10.1.1.3 |
||
.1.3.6.1.3.37.1.10.1.1.4 |
||
.1.3.6.1.3.37.1.10.1.1.5 |
||
|
Integer32
|
.1.3.6.1.3.37.1.10.1.1.6 |
|
.1.3.6.1.3.37.1.10.1.1.7 |
||
|
OctetString
|
.1.3.6.1.3.37.1.10.1.1.8 |
|
|
Enumeration
|
.1.3.6.1.3.37.1.10.1.1.9 |
|
.1.3.6.1.3.37.1.2 |
||
.1.3.6.1.3.37.1.2.1 |
||
.1.3.6.1.3.37.1.2.1.1 |
||
|
Enumeration
|
.1.3.6.1.3.37.1.2.1.1.1 |
|
|
Integer32
|
.1.3.6.1.3.37.1.2.1.1.2 |
|
|
secondsUnsigned16TC
|
.1.3.6.1.3.37.1.2.1.1.3 |
|
.1.3.6.1.3.37.1.2.1.1.4 |
||
.1.3.6.1.3.37.1.2.1.1.5 |
||
|
secondsSNMPv2-SMITimeTicks
|
.1.3.6.1.3.37.1.2.1.1.6 |
|
.1.3.6.1.3.37.1.2.1.1.7 |
||
.1.3.6.1.3.37.1.2.1.1.8 |
||
.1.3.6.1.3.37.1.2.1.1.9 |
||
.1.3.6.1.3.37.1.3 |
||
.1.3.6.1.3.37.1.3.1 |
||
.1.3.6.1.3.37.1.3.1.1 |
||
|
Integer32
|
.1.3.6.1.3.37.1.3.1.1.1 |
|
|
Enumeration
|
.1.3.6.1.3.37.1.3.1.1.10 |
|
.1.3.6.1.3.37.1.3.1.1.11 |
||
.1.3.6.1.3.37.1.3.1.1.12 |
||
|
secondsSNMPv2-SMITimeTicks
|
.1.3.6.1.3.37.1.3.1.1.13 |
|
.1.3.6.1.3.37.1.3.1.1.14 |
||
.1.3.6.1.3.37.1.3.1.1.15 |
||
|
|
.1.3.6.1.3.37.1.3.1.1.2 |
|
.1.3.6.1.3.37.1.3.1.1.3 |
||
.1.3.6.1.3.37.1.3.1.1.4 |
||
.1.3.6.1.3.37.1.3.1.1.5 |
||
|
|
Enumeration
|
.1.3.6.1.3.37.1.3.1.1.6 |
.1.3.6.1.3.37.1.3.1.1.7 |
||
|
|
Enumeration
|
.1.3.6.1.3.37.1.3.1.1.8 |
.1.3.6.1.3.37.1.3.1.1.9 |
||
.1.3.6.1.3.37.1.4 |
||
.1.3.6.1.3.37.1.4.1 |
||
.1.3.6.1.3.37.1.4.1.1 |
||
|
Enumeration
|
.1.3.6.1.3.37.1.4.1.1.1 |
|
|
millisecondsInteger32
|
.1.3.6.1.3.37.1.4.1.1.10 |
|
|
millisecondsUnsigned16TC
|
.1.3.6.1.3.37.1.4.1.1.11 |
|
|
secondsInteger32
|
.1.3.6.1.3.37.1.4.1.1.12 |
|
|
secondsInteger32
|
.1.3.6.1.3.37.1.4.1.1.13 |
|
|
secondsInteger32
|
.1.3.6.1.3.37.1.4.1.1.14 |
|
.1.3.6.1.3.37.1.4.1.1.2 |
||
.1.3.6.1.3.37.1.4.1.1.3 |
||
.1.3.6.1.3.37.1.4.1.1.4 |
||
|
Integer32
|
.1.3.6.1.3.37.1.4.1.1.5 |
|
.1.3.6.1.3.37.1.4.1.1.6 |
||
|
OctetString
|
.1.3.6.1.3.37.1.4.1.1.7 |
|
|
Integer32
|
.1.3.6.1.3.37.1.4.1.1.8 |
|
|
millisecondsInteger32
|
.1.3.6.1.3.37.1.4.1.1.9 |
|
.1.3.6.1.3.37.1.5 |
||
.1.3.6.1.3.37.1.5.1 |
||
.1.3.6.1.3.37.1.5.1.1 |
||
|
Enumeration
|
.1.3.6.1.3.37.1.5.1.1.1 |
|
|
framesSNMPv2-SMICounter32
|
.1.3.6.1.3.37.1.5.1.1.10 |
|
|
framesSNMPv2-SMICounter32
|
.1.3.6.1.3.37.1.5.1.1.11 |
|
.1.3.6.1.3.37.1.5.1.1.12 |
||
.1.3.6.1.3.37.1.5.1.1.13 |
||
|
framesSNMPv2-SMICounter32
|
.1.3.6.1.3.37.1.5.1.1.2 |
|
|
framesSNMPv2-SMICounter32
|
.1.3.6.1.3.37.1.5.1.1.3 |
|
|
framesSNMPv2-SMICounter32
|
.1.3.6.1.3.37.1.5.1.1.4 |
|
.1.3.6.1.3.37.1.5.1.1.5 |
||
.1.3.6.1.3.37.1.5.1.1.6 |
||
.1.3.6.1.3.37.1.5.1.1.7 |
||
.1.3.6.1.3.37.1.5.1.1.8 |
||
.1.3.6.1.3.37.1.5.1.1.9 |
||
.1.3.6.1.3.37.1.5.2 |
||
.1.3.6.1.3.37.1.5.2.1 |
||
|
Enumeration
|
.1.3.6.1.3.37.1.5.2.1.1 |
|
.1.3.6.1.3.37.1.5.2.1.10 |
||
.1.3.6.1.3.37.1.5.2.1.2 |
||
.1.3.6.1.3.37.1.5.2.1.3 |
||
.1.3.6.1.3.37.1.5.2.1.4 |
||
.1.3.6.1.3.37.1.5.2.1.5 |
||
|
framesSNMPv2-SMICounter32
|
.1.3.6.1.3.37.1.5.2.1.6 |
|
.1.3.6.1.3.37.1.5.2.1.7 |
||
.1.3.6.1.3.37.1.5.2.1.8 |
||
.1.3.6.1.3.37.1.5.2.1.9 |
||
.1.3.6.1.3.37.1.5.3 |
||
.1.3.6.1.3.37.1.5.3.1 |
||
|
Enumeration
|
.1.3.6.1.3.37.1.5.3.1.1 |
|
|
Enumeration
|
.1.3.6.1.3.37.1.5.3.1.2 |
|
|
framesSNMPv2-SMICounter32
|
.1.3.6.1.3.37.1.5.3.1.3 |
|
|
framesSNMPv2-SMICounter32
|
.1.3.6.1.3.37.1.5.3.1.4 |
|
|
framesSNMPv2-SMICounter32
|
.1.3.6.1.3.37.1.5.3.1.5 |
|
|
framesSNMPv2-SMICounter32
|
.1.3.6.1.3.37.1.5.3.1.6 |
|
|
framesSNMPv2-SMICounter32
|
.1.3.6.1.3.37.1.5.3.1.7 |
|
|
framesSNMPv2-SMICounter32
|
.1.3.6.1.3.37.1.5.3.1.8 |
|
|
framesSNMPv2-SMICounter32
|
.1.3.6.1.3.37.1.5.3.1.9 |
|
.1.3.6.1.3.37.1.6 |
||
.1.3.6.1.3.37.1.6.1 |
||
.1.3.6.1.3.37.1.6.1.1 |
||
|
Integer32
|
.1.3.6.1.3.37.1.6.1.1.1 |
|
.1.3.6.1.3.37.1.6.1.1.10 |
||
|
secondsSNMPv2-SMITimeTicks
|
.1.3.6.1.3.37.1.6.1.1.11 |
|
|
Enumeration
|
.1.3.6.1.3.37.1.6.1.1.2 |
|
|
Enumeration
|
.1.3.6.1.3.37.1.6.1.1.3 |
|
.1.3.6.1.3.37.1.6.1.1.4 |
||
|
Enumeration
|
.1.3.6.1.3.37.1.6.1.1.5 |
|
.1.3.6.1.3.37.1.6.1.1.6 |
||
.1.3.6.1.3.37.1.6.1.1.7 |
||
|
Enumeration
|
.1.3.6.1.3.37.1.6.1.1.8 |
|
|
secondsUnsigned16TC
|
.1.3.6.1.3.37.1.6.1.1.9 |
|
.1.3.6.1.3.37.1.6.2 |
||
.1.3.6.1.3.37.1.6.2.1 |
||
|
Integer32
|
.1.3.6.1.3.37.1.6.2.1.1 |
|
.1.3.6.1.3.37.1.6.2.1.2 |
||
.1.3.6.1.3.37.1.6.3 |
||
.1.3.6.1.3.37.1.6.3.1 |
||
|
Integer32
|
.1.3.6.1.3.37.1.6.3.1.1 |
|
.1.3.6.1.3.37.1.6.3.1.2 |
||
.1.3.6.1.3.37.1.6.3.1.3 |
||
.1.3.6.1.3.37.1.6.4 |
||
.1.3.6.1.3.37.1.6.4.1 |
||
.1.3.6.1.3.37.1.6.4.1.1 |
||
.1.3.6.1.3.37.1.7 |
||
.1.3.6.1.3.37.1.7.1 |
||
.1.3.6.1.3.37.1.7.1.1 |
||
|
Integer32
|
.1.3.6.1.3.37.1.7.1.1.1 |
|
|
|
.1.3.6.1.3.37.1.7.1.1.10 |
|
|
|
Enumeration
|
.1.3.6.1.3.37.1.7.1.1.11 |
|
|
.1.3.6.1.3.37.1.7.1.1.2 |
|
|
|
.1.3.6.1.3.37.1.7.1.1.3 |
|
|
|
.1.3.6.1.3.37.1.7.1.1.4 |
|
|
|
Enumeration
|
.1.3.6.1.3.37.1.7.1.1.5 |
|
|
.1.3.6.1.3.37.1.7.1.1.6 |
|
|
|
.1.3.6.1.3.37.1.7.1.1.7 |
|
.1.3.6.1.3.37.1.7.1.1.8 |
||
|
|
.1.3.6.1.3.37.1.7.1.1.9 |
|
.1.3.6.1.3.37.1.8 |
||
.1.3.6.1.3.37.1.8.1 |
||
.1.3.6.1.3.37.1.8.1.1 |
||
.1.3.6.1.3.37.1.8.1.1.1 |
||
.1.3.6.1.3.37.1.8.1.1.10 |
||
.1.3.6.1.3.37.1.8.1.1.11 |
||
.1.3.6.1.3.37.1.8.1.1.12 |
||
|
Enumeration
|
.1.3.6.1.3.37.1.8.1.1.13 |
|
.1.3.6.1.3.37.1.8.1.1.2 |
||
.1.3.6.1.3.37.1.8.1.1.3 |
||
.1.3.6.1.3.37.1.8.1.1.4 |
||
|
|
.1.3.6.1.3.37.1.8.1.1.5 |
|
|
|
Enumeration
|
.1.3.6.1.3.37.1.8.1.1.6 |
.1.3.6.1.3.37.1.8.1.1.7 |
||
.1.3.6.1.3.37.1.8.1.1.8 |
||
|
|
.1.3.6.1.3.37.1.8.1.1.9 |
|
.1.3.6.1.3.37.1.9 |
||
.1.3.6.1.3.37.1.9.1 |
||
.1.3.6.1.3.37.1.9.1.1 |
||
.1.3.6.1.3.37.1.9.1.1.1 |
||
.1.3.6.1.3.37.1.9.1.1.2 |
||
.1.3.6.1.3.37.1.9.1.1.3 |
||
.1.3.6.1.3.37.1.9.1.1.4 |
||
.1.3.6.1.3.37.1.9.1.1.5 |
||
|
secondsUnsigned16TC
|
.1.3.6.1.3.37.1.9.1.1.6 |
|
.1.3.6.1.3.37.1.9.1.1.7 |
||
.1.3.6.1.3.37.1.9.1.1.8 |
||
.1.3.6.1.3.37.1.9.2 |
||
.1.3.6.1.3.37.1.9.2.1 |
||
.1.3.6.1.3.37.1.9.2.1.1 |
||
.1.3.6.1.3.37.1.9.2.1.2 |
||
.1.3.6.1.3.37.1.9.2.1.3 |
||
.1.3.6.1.3.37.1.9.2.1.4 |
||
.1.3.6.1.3.37.1.9.2.1.5 |
||
|
OctetString
|
.1.3.6.1.3.37.1.9.2.1.6 |
|
.1.3.6.1.3.37.2 |
||
.1.3.6.1.3.37.2.0 |
||
.1.3.6.1.3.37.3 |
||
.1.3.6.1.3.37.3.1 |
||
.1.3.6.1.3.37.3.2 |
Dependencies (10) 6 direct · 4 transitive Show tree and compile order Hide dependency details
Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.
Dependency tree
Dependency-first compile order
- SNMPv2-SMIrfc
- SNMPv2-TCrfc
- IANAifType-MIBrfc
- SNMPv2-CONFrfc
- SNMPv2-MIBrfc
- IF-MIBrfc
- INET-ADDRESS-MIBrfc
- RFC-1212rfc
- RFC1155-SMIrfc
- RFC1213-MIBrfc
- ISIS-DRAFT-13-MIBhuaweiselected
Type Definitions (18)
| Enumeration |
on(1)off(2)Type used in enabling and disabling a row.
Values match those in RFC 2863. |
|
| OctetString |
range: 7 ID for a circuit.
|
|
| Integer32 |
range: 0..63 Integer sub-range for default metric for single hop.
ISO 10589 provides for 4 types of metric. Only the 'default' metric is used in practice. |
|
| Unsigned32 |
range: 0..4261412864 Full Metric for IP Routes. Traffic Engineering extensions
provide 32 bit metrics. |
|
| Enumeration |
none(0)area(1)domain(2)Identifies a level.
|
|
| Integer32 |
range: 0..127 Integer sub-range for IS-IS priority.
|
|
| OctetString |
range: 0..64 A block to contain the header from a PDU.
|
|
| Integer32 |
range: 512..16000 Integer sub range for LSP size.
|
|
| Enumeration |
off(1)on(2)waiting(3)overloaded(4)States of the IS-IS protocol.
|
|
| OctetString |
range: 0range: 8 A Link State PDU Identifier.
|
|
| Enumeration |
narrow(1)wide(2)both(3)Do we use 1195 style Metrics or wide metrics.
|
|
| Enumeration |
internal(1)external(2)Is this an Internal or External Metric?
|
|
| OctetString |
range: 0..20 OSI Network Service Address, e.g. NSAP, SNPA, or Network
Entity Title |
|
| Enumeration |
iso8473(129)ipV6(142)ip(204)virtual-access(255)Types of network protocol supported by Integrated IS-IS.
The values for ISO8473 and IP are those registered for these protocols in ISO TR9577. |
|
| OctetString |
range: 6 A system ID.
|
|
| Unsigned32 |
range: 0..65535 An Unsigned32 further restricted to 16 Bits. Note that
the ASN.1 BER encoding may still require 24 Bits for some values. |
|
| Unsigned32 |
range: 0..255 An Unsigned32 further restricted to 8 Bits. Note that
the ASN.1 BER encoding may still require 16 Bits for some values. |
|
| Unsigned32 |
range: 0..16777215 Wide Metric for IS Neighbors. ISO 10589 provides a 6 bit metric.
Traffic Engineering extensions provide 24 bit metrics. |
Conformance Groups (9)
Compliance Statements (2)
OID
.1.3.6.1.3.37.3.2.1The compliance statement for agents that support
the IS-IS MIB
the IS-IS MIB
Required groups
| mandatory | isisSystemGroup | |
| mandatory | isisCircuitGroup | |
| mandatory | isisISAdjGroup | |
| mandatory | isisNotificationObjectGroup | |
| mandatory | isisNotificationGroup |
OID
.1.3.6.1.3.37.3.2.2The compliance statement for agents that support
the IS-IS MIB
the IS-IS MIB
Required groups
| mandatory | isisSystemGroup | |
| mandatory | isisCircuitGroup | |
| mandatory | isisISAdjGroup | |
| mandatory | isisNotificationObjectGroup | |
| mandatory | isisNotificationGroup | |
| mandatory | isisISPDUCounterGroup | |
| mandatory | isisRATableGroup | |
| mandatory | isisISIPRADestGroup | |
| mandatory | isisLSPGroup |
Notifications / Traps (17)
| Name | OID | Description |
|---|---|---|
.1.3.6.1.3.37.2.0.1 |
This notification is generated when the system
enters or leaves the Overload state. The number of times this has be generated and cleared is recorded by isisSysStatLSPDbaseOloads. |
|
.1.3.6.1.3.37.2.0.10 |
A notification sent when we receive a PDU
with incorrect authentication information field. This notification includes the header of the packet, which may help a network manager identify the source of the confusion. This should be an edge-triggered notification. We should not send a second notification about PDUs received from what seem to be the same source. |
|
.1.3.6.1.3.37.2.0.11 |
A notification sent when we receive a Hello
PDU from an IS running a different version of the protocol. This notification includes the header of the packet, which may help a network manager identify the source of the confusion. This should be an edge-triggered notification. We should not send a second notification about PDUs received from what seem to be the same source. This decision is up to the agent to make, and may be based on the circuit or on some MAC level information. |
|
.1.3.6.1.3.37.2.0.12 |
A notification sent when we receive a Hello
PDU from an IS which does not share any area address. This notification includes the header of the packet, which may help a network manager identify the source of the confusion. This should be an edge-triggered notification. We should not send a second notification about PDUs received from what seem to be the same source. This decision is up to the agent to make, and may be based on the circuit or on some MAC level information. |
|
.1.3.6.1.3.37.2.0.13 |
A notification sent when we receive a Hello
PDU from an IS, but do not establish an adjacency for some reason. This should be an edge-triggered notification. We should not send a second notification about PDUs received from the same source. |
|
.1.3.6.1.3.37.2.0.14 |
A notification sent when we attempt to propagate
an LSP which is larger than the dataLinkBlockSize for the circuit. This should be an edge-triggered notification. We should not send a second notification about PDUs received from the same source. |
|
.1.3.6.1.3.37.2.0.15 |
A notification sent when a Level 1 LSP or Level
2 LSP is received which is larger than the local value for isisOriginatingBufferSize, or when an LSP is received containing the isisOriginatingBufferSize option and the value in the PDU option field does not match the local value for isisOriginatingBufferSize. We pass up the size from the option field or the size of the LSP that exceeds our configuration. This should be an edge-triggered notification. We should not send a second notification about PDUs received from the same source. |
|
.1.3.6.1.3.37.2.0.16 |
A notification sent when a non-pseudonode
segment 0 LSP is received that has no matching protocols supported. This may be because the system does not generate the field, or because there are no common elements. The list of protocols supported should be included in the notification: it may be empty if the TLV is not supported, or if the TLV is empty. This should be an edge-triggered notification. We should not send a second notification about PDUs received from the same source. |
|
.1.3.6.1.3.37.2.0.17 |
A notification sent when an adjacency changes
state, entering or leaving state up. The first 6 bytes of the isisPduLspId are the SystemID of the adjacent IS. The isisAdjState is the new state of the adjacency. |
|
.1.3.6.1.3.37.2.0.2 |
This notification is generated when one of the
manual areaAddresses assigned to this system is ignored when computing routes. The object isisManAreaAddrExistState describes the area that has been dropped. The number of times this event has been generated is counted by isisSysManAddrDropFromAreas. This notification is edge triggered, and should not be regenerated until an address that was used in the previous computation has been dropped. |
|
.1.3.6.1.3.37.2.0.3 |
This notification is generated when we find that
an LSP that was stored in memory has become corrupted. The number of times this has been generated is counted by isisSysCorrLSPs. We forward an LSP ID. We may have independent knowledge of the ID, but in some implementations there is a chance that the ID itself will be corrupted. |
|
.1.3.6.1.3.37.2.0.4 |
When the sequence number on an LSP we generate
wraps the 32 bit sequence counter, we purge and wait to re-announce this information. This notification describes that event. Since these should not be generated rapidly, we generate an event each time this happens. While the first 6 bytes of the LSPID are ours, the other two contain useful information. |
|
.1.3.6.1.3.37.2.0.5 |
A notification sent when we receive a PDU
with a different value of the System ID Length. This notification includes the an index to identify the circuit where we saw the PDU and the header of the PDU which may help a network manager identify the source of the confusion. This should be an edge-triggered notification. We should not send a second notification about PDUs received from what seem to be the same source. This decision is up to the agent to make, and may be based on the circuit or on some MAC level information. |
|
.1.3.6.1.3.37.2.0.6 |
A notification sent when we receive a PDU
with a different value of the Maximum Area Addresses. This notification includes the header of the packet, which may help a network manager identify the source of the confusion. This should be an edge-triggered notification. We should not send a second notification about PDUs received from what seem to be the same source. |
|
.1.3.6.1.3.37.2.0.7 |
A notification sent when we receive a PDU
with our systemID and zero age. This notification includes the circuit Index and router ID from the LSP, if available, which may help a network manager identify the source of the confusion. |
|
.1.3.6.1.3.37.2.0.8 |
When we receive an LSP with out System ID
and different contents, we may need to reissue the LSP with a higher sequence number. We send this notification if we need to increase the sequence number by more than one. If two Intermediate Systems are configured with the same System ID, this notification will fire. |
|
.1.3.6.1.3.37.2.0.9 |
A notification sent when we receive a PDU
with the wrong authentication type field. This notification includes the header of the packet, which may help a network manager identify the source of the confusion. This should be an edge-triggered notification. We should not send a second notification about PDUs received from what seem to be the same source. |