IPO-PHONES-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
1
Rows
1
Columns
11
.1.3.6.1.4.1.6889.2.2.1.1.1.1.1.2 · 1 row entry · 11 columns
Uses the avaya variant from /opt/observium/mibs/avaya.
Command help
Walk ipoPhonesTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPO-PHONES-MIB' -M '/opt/observium/mibs/avaya:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPO-PHONES-MIB::ipoPhonesTable'
A list of phone entries.  The number of entries is given by
the value of ipoPhonesNumber.
ipoPhonesEntry row .1.3.6.1.4.1.6889.2.2.1.1.1.1.1.2.1
An entry containing management information applicable to a
particular IP Office phone.
Indexes
Column Syntax OID
A unique value, greater than zero, for each phone. It is
recommended that values are assigned contiguously starting
from 1. The value for each phone sub-layer must remain
constant at least from one re-initialization o…
DIFFSERV-MIBIndexInteger
Type Constraints:
range: 1..4294967295
.1.3.6.1.4.1.6889.2.2.1.1.1.1.1.2.1.1
The numerical logical extension entity identifier assigned to
the phone on the IP Office entity.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.6889.2.2.1.1.1.1.1.2.1.2
The number that should be dialed to reach this phone on the
IP Office entity.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.6889.2.2.1.1.1.1.1.2.1.3
The short form of the name of the user of this phone which is
used in caller display. This is quite often the forename of
the user.
SNMPv2-TCDisplayString
Constraints:
range: 0-15
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.6889.2.2.1.1.1.1.1.2.1.4
The long form of the name of the user of this phone. This is
normally the full name (forename and surname) of the user.
SNMPv2-TCDisplayString
Constraints:
range: 0-31
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.6889.2.2.1.1.1.1.1.2.1.5
The type of phone that is connected to this IP Office logical
phone extension.
.1.3.6.1.4.1.6889.2.2.1.1.1.1.1.2.1.6
A reference, by entPhysicalIndex value, to the
EntPhysicalEntry representing the physical port entity that
this phone entry is associated with in an entity MIB
instantiation within the IP Office agent. If no MIB
definit…
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6889.2.2.1.1.1.1.1.2.1.7
The port number on the module that the operator uses to
identify the port.

The port numbers on the expansion modules will follow standard
numbering, beginning at 1 and incrementing until the last port.
T…
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6889.2.2.1.1.1.1.1.2.1.8
The number that the operator uses to
identify the module.

The module numbers are assigned according to the expansion
port number that it's plugged into on the Control unit.

Example: Module…
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6889.2.2.1.1.1.1.1.2.1.9
The IP Address of the phone. In network-byte order. In the usual
IP Address format - xxx.xxx.xxx.xxx.

The IP address will only be present if the phone is an IP phone. If
it is not, it will contain zeros (…
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.6889.2.2.1.1.1.1.1.2.1.10
The Physical Address of the phone, such as the MAC Address.

The physical address will only be present if the phone is an IP
phone. If it is not, it will contain zeros (00.00.00.00.00.00).
SNMPv2-TCPhysAddress
Description:
Represents media- or physical-level addresses.
.1.3.6.1.4.1.6889.2.2.1.1.1.1.1.2.1.11