IPMROUTE-MIB

        The MIB module for management of IP Multicast routing, but
independent of the specific multicast routing protocol in
use.
    
Source file
IPMROUTE-MIB
Last revised
Identity
ipMRouteMIB
Base OID
1.3.6.1.3.60
Imported Objects
SNMPv2-CONF MODULE-COMPLIANCE (no object page) OBJECT-GROUP (no object page)
SNMPv2-SMI Counter32 experimental Integer32 IpAddress MODULE-IDENTITY (no object page) OBJECT-TYPE (no object page) TimeTicks
SNMPv2-TC RowStatus
Net-SNMP examples using the cisco MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'IPMROUTE-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'IPMROUTE-MIB::ipMRouteMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPMROUTE-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPMROUTE-MIB::ipMRouteMIB'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (51)
.1.3.6.1.3.60
.1.3.6.1.3.60.1
.1.3.6.1.3.60.1.1
Enumeration
.1.3.6.1.3.60.1.1.1
.1.3.6.1.3.60.1.1.2
.1.3.6.1.3.60.1.1.2.1
.1.3.6.1.3.60.1.1.2.1.1
.1.3.6.1.3.60.1.1.2.1.10
Enumeration
.1.3.6.1.3.60.1.1.2.1.11
Enumeration
.1.3.6.1.3.60.1.1.2.1.12
.1.3.6.1.3.60.1.1.2.1.13
.1.3.6.1.3.60.1.1.2.1.14
Enumeration
.1.3.6.1.3.60.1.1.2.1.15
.1.3.6.1.3.60.1.1.2.1.2
.1.3.6.1.3.60.1.1.2.1.3
.1.3.6.1.3.60.1.1.2.1.4
.1.3.6.1.3.60.1.1.2.1.5
.1.3.6.1.3.60.1.1.2.1.6
.1.3.6.1.3.60.1.1.2.1.7
.1.3.6.1.3.60.1.1.2.1.8
.1.3.6.1.3.60.1.1.2.1.9
.1.3.6.1.3.60.1.1.3
.1.3.6.1.3.60.1.1.3.1
.1.3.6.1.3.60.1.1.3.1.1
Enumeration
.1.3.6.1.3.60.1.1.3.1.10
.1.3.6.1.3.60.1.1.3.1.11
.1.3.6.1.3.60.1.1.3.1.2
.1.3.6.1.3.60.1.1.3.1.3
Integer32
.1.3.6.1.3.60.1.1.3.1.4
.1.3.6.1.3.60.1.1.3.1.5
Enumeration
.1.3.6.1.3.60.1.1.3.1.6
.1.3.6.1.3.60.1.1.3.1.7
.1.3.6.1.3.60.1.1.3.1.8
.1.3.6.1.3.60.1.1.3.1.9
.1.3.6.1.3.60.1.1.4
.1.3.6.1.3.60.1.1.4.1
Integer32
.1.3.6.1.3.60.1.1.4.1.1
.1.3.6.1.3.60.1.1.4.1.2
Enumeration
.1.3.6.1.3.60.1.1.4.1.3
.1.3.6.1.3.60.1.1.4.1.4
.1.3.6.1.3.60.1.1.4.1.5
.1.3.6.1.3.60.1.1.4.1.6
.1.3.6.1.3.60.1.1.5
.1.3.6.1.3.60.1.1.5.1
Integer32
.1.3.6.1.3.60.1.1.5.1.1
.1.3.6.1.3.60.1.1.5.1.2
.1.3.6.1.3.60.1.1.5.1.3
.1.3.6.1.3.60.1.1.5.1.4
.1.3.6.1.3.60.2
.1.3.6.1.3.60.2.1
.1.3.6.1.3.60.2.2
Dependencies (3) 3 direct Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Dependency-first compile order
  1. SNMPv2-SMIrfc
  2. SNMPv2-CONFrfc
  3. SNMPv2-TCrfc
  4. IPMROUTE-MIBciscoselected
Conformance Groups (5)
A collection of objects to support basic management of
IP Multicast routing.
.1.3.6.1.3.60.2.2.1
A collection of objects to support management of the use
of hop counts in IP Multicast routing.
.1.3.6.1.3.60.2.2.2
A collection of objects to support management of scoped
multicast address boundaries.
.1.3.6.1.3.60.2.2.3
A collection of objects to support management of packet
counters for each outgoing interface entry of a route.
.1.3.6.1.3.60.2.2.4
A collection of objects providing information on the
relationship between multicast routing information, and the
IP Forwarding Table.
.1.3.6.1.3.60.2.2.6
Compliance Statements (1)

OID .1.3.6.1.3.60.2.1.1
The compliance statement for the IP Multicast MIB.
Required groups
mandatory ipMRouteMIBBasicGroup
mandatory ipMRouteMIBRouteGroup
optional ipMRouteMIBBoundaryGroup This group is only required to support management of
scoped multicast address boundaries.
Object refinements
ObjectAccessSyntaxDescription
ipMRouteBoundaryStatus readonly
Write access is not required.