IPI-G8031-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
2
Rows
2
Columns
34
.1.3.6.1.4.1.36673.8031.1.1 · 1 row entry · 26 columns
Uses the ipinfusion variant from /opt/observium/mibs/ipinfusion.
Command help
Walk ipiG8031ConfigInstanceTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPI-G8031-MIB' -M '/opt/observium/mibs/ipinfusion:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPI-G8031-MIB::ipiG8031ConfigInstanceTable'
A Table containing information of G8031 Instance configured.
ipiG8031ConfigInstanceEntry row .1.3.6.1.4.1.36673.8031.1.1.1
A Table object containing information of G8031 Instance entries.
Column Syntax OID
This object specifies the G8031 ProtectionGroup Index.
Integer32
Constraints:
range: 1-65535
.1.3.6.1.4.1.36673.8031.1.1.1.1
This object specifies the configured G8031 Instance Name.
OctetString
Constraints:
range: 1-64
.1.3.6.1.4.1.36673.8031.1.1.1.2
This object specifies the configured G8031 Bridge architecture
type is 1:1 or 1+1.
OctetString
Constraints:
range: 1-64
.1.3.6.1.4.1.36673.8031.1.1.1.3
This object specifies the configured G8031 profile direction
uni-directional or bi-directional switching.
OctetString
Constraints:
range: 1-64
.1.3.6.1.4.1.36673.8031.1.1.1.4
This object specifies the configured protection mode for an G8031 profile
based on ipiG8031ProtectionMode types.
IpiG8031ProtectionMode
Type Values:
1one-and-one-Bi
2one-plus-one-Bi
3one-and-one-Uni
.1.3.6.1.4.1.36673.8031.1.1.1.5
This object specifies the switching mode for an G8031 profile
based on ipiG8031SwitchingMode types.
IpiG8031SwitchingMode
Type Values:
1revertive
2non-revertive
.1.3.6.1.4.1.36673.8031.1.1.1.6
This object specifies the hold-off timer status for an G8031 profile.
Each protection group should have a provisionable hold-off timer.
The suggested range of the holdoff timer is 0 to 10 seconds in steps of 100 ms.
OctetString
Constraints:
range: 1-64
.1.3.6.1.4.1.36673.8031.1.1.1.7
This object specifies the wait-to-restore timer for an G8031 profile.
The wait-to-restore (WTR) period, may be configured by the operator in
1 minute steps between 5 and 12 minutes, and default value is 5mins.
minutesOctetString
Constraints:
range: 1-64
.1.3.6.1.4.1.36673.8031.1.1.1.8
This object specifies the configured working port name.
OctetString
Constraints:
range: 1-64
.1.3.6.1.4.1.36673.8031.1.1.1.9
This object specifies the configured working port ifindex.
Integer32
Constraints:
range: 1-65535
.1.3.6.1.4.1.36673.8031.1.1.1.10
This object specifies the working port status as UP/DOWN.
OctetString
Constraints:
range: 1-64
.1.3.6.1.4.1.36673.8031.1.1.1.11
This object specifies the MEP ID configured for working CFM Port.
IEEE8021-CFM-MIBDot1agCfmMepIdOrZeror/w
Type Constraints:
range: 0..8191
.1.3.6.1.4.1.36673.8031.1.1.1.12
This object specifies the CC Interval configured for working CFM Port
IEEE8021-CFM-MIBDot1agCfmCcmIntervalr/w
Type Values:
0intervalInvalid
1interval300Hz
2interval10ms
3interval100ms
4interval1s
5interval10s
6interval1min
7interval10min
.1.3.6.1.4.1.36673.8031.1.1.1.13
This object specifies the DomainName configured for working CFM Port.
IEEE8021-CFM-MIBDot1agCfmMaintDomainNamer/w
Type Constraints:
range: 1..43
.1.3.6.1.4.1.36673.8031.1.1.1.14
This object specifies the MaintenanceAssociation name configured
for working CFM Port.
IEEE8021-CFM-MIBDot1agCfmMaintAssocNamer/w
Type Constraints:
range: 1..45
.1.3.6.1.4.1.36673.8031.1.1.1.15
This object specifies the cofigured protection port name.
OctetString
Constraints:
range: 1-64
.1.3.6.1.4.1.36673.8031.1.1.1.16
This object specifies the configured protection port ifindex.
Integer32
Constraints:
range: 1-65535
.1.3.6.1.4.1.36673.8031.1.1.1.17
This object specifies the protection port status as UP/DOWN.
OctetString
Constraints:
range: 1-64
.1.3.6.1.4.1.36673.8031.1.1.1.18
This object specifies the MEP ID configured for protection CFM Port.
IEEE8021-CFM-MIBDot1agCfmMepIdOrZeror/w
Type Constraints:
range: 0..8191
.1.3.6.1.4.1.36673.8031.1.1.1.19
This object specifies the CC Interval configured for protection CFM Port.
IEEE8021-CFM-MIBDot1agCfmCcmIntervalr/w
Type Values:
0intervalInvalid
1interval300Hz
2interval10ms
3interval100ms
4interval1s
5interval10s
6interval1min
7interval10min
.1.3.6.1.4.1.36673.8031.1.1.1.20
This object specifies the DomainName configured for protection CFM Port.
IEEE8021-CFM-MIBDot1agCfmMaintDomainNamer/w
Type Constraints:
range: 1..43
.1.3.6.1.4.1.36673.8031.1.1.1.21
This object specifies the MaintenanceAssociation name configured
for protection CFM Port.
IEEE8021-CFM-MIBDot1agCfmMaintAssocNamer/w
Type Constraints:
range: 1..45
.1.3.6.1.4.1.36673.8031.1.1.1.22
This object specifies the CFM level configured for G8031 Instance.
IEEE8021-CFM-MIBDot1agCfmMDLevel
Type Constraints:
range: 0..7
.1.3.6.1.4.1.36673.8031.1.1.1.23
This object specifies the control(primary) vlan configured in G8031 Instance.
Integer32
Constraints:
range: 1-4094
.1.3.6.1.4.1.36673.8031.1.1.1.24
This object specifies the secondary(inner) vlan configured in G8031 Instance.
Integer32
Constraints:
range: 1-4094
.1.3.6.1.4.1.36673.8031.1.1.1.25
This object specifies the data vlan configured in G8031 Instance.
OctetString
Constraints:
range: 1-64
.1.3.6.1.4.1.36673.8031.1.1.1.26
.1.3.6.1.4.1.36673.8031.1.2 · 1 row entry · 8 columns
Uses the ipinfusion variant from /opt/observium/mibs/ipinfusion.
Command help
Walk ipiG8031StatusTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPI-G8031-MIB' -M '/opt/observium/mibs/ipinfusion:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPI-G8031-MIB::ipiG8031StatusTable'
A Table containing information of G8031 Status of FSM,APS PDU and Active Path Info
ipiG8031StatusEntry row .1.3.6.1.4.1.36673.8031.1.2.1
A Table object containing information of G8031 Status entries
Column Syntax OID
This object specifies the configured G8031 Instance Name.
OctetString
Constraints:
range: 1-64
.1.3.6.1.4.1.36673.8031.1.2.1.1
This object specifies the whether the active path(transport entity)
is working or protection port.
IpiG8031ActivePathType
Type Values:
1working-port
2protection-port
.1.3.6.1.4.1.36673.8031.1.2.1.2
This object specifies the APS message transmitted.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.36673.8031.1.2.1.3
This object specifies the APS message received.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.36673.8031.1.2.1.4
This object specifies the G8031 FSM State based on ipiG8031FsmState states.
OctetString
Constraints:
range: 1-64
.1.3.6.1.4.1.36673.8031.1.2.1.5
This object specifies the G8031 downstream failure state of port.
Values are based on ipiG8031dFopState states
OctetString
Constraints:
range: 1-64
.1.3.6.1.4.1.36673.8031.1.2.1.6
This object specifies the G8031 requested signal as either normal or null.
OctetString
Constraints:
range: 1-64
.1.3.6.1.4.1.36673.8031.1.2.1.7
This object specifies the G8031 local commands either local-lockout/freeze.
IpiG8031LocalCmds
Type Values:
1local-freeze
2local-lockout
.1.3.6.1.4.1.36673.8031.1.2.1.8