IPI-G8031-MIB

        g8031 mib for IPI enterprise.
    
Source file
IPI-G8031-MIB
Last revised
Identity
ipiG8031MIB
Base OID
1.3.6.1.4.1.36673.8031
Imported Objects
IEEE8021-CFM-MIB Dot1agCfmCcmInterval Dot1agCfmMaintAssocName Dot1agCfmMaintDomainName Dot1agCfmMDLevel Dot1agCfmMepIdOrZero
IPI-MODULE-MIB ipi
SNMPv2-SMI Counter32 Integer32 MODULE-IDENTITY (no object page) NOTIFICATION-TYPE (no object page) OBJECT-TYPE (no object page) TimeTicks Unsigned32
SNMPv2-TC DisplayString TEXTUAL-CONVENTION (no object page) TruthValue
Net-SNMP examples using the ipinfusion MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'IPI-G8031-MIB' -M '/opt/observium/mibs/ipinfusion:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'IPI-G8031-MIB::ipiG8031MIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPI-G8031-MIB' -M '/opt/observium/mibs/ipinfusion:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPI-G8031-MIB::ipiG8031MIB'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (41)
.1.3.6.1.4.1.36673.8031
.1.3.6.1.4.1.36673.8031.0
.1.3.6.1.4.1.36673.8031.1
.1.3.6.1.4.1.36673.8031.1.1
.1.3.6.1.4.1.36673.8031.1.1.1
Integer32
.1.3.6.1.4.1.36673.8031.1.1.1.1
Integer32
.1.3.6.1.4.1.36673.8031.1.1.1.10
OctetString
.1.3.6.1.4.1.36673.8031.1.1.1.11
.1.3.6.1.4.1.36673.8031.1.1.1.12
.1.3.6.1.4.1.36673.8031.1.1.1.13
.1.3.6.1.4.1.36673.8031.1.1.1.14
.1.3.6.1.4.1.36673.8031.1.1.1.15
OctetString
.1.3.6.1.4.1.36673.8031.1.1.1.16
Integer32
.1.3.6.1.4.1.36673.8031.1.1.1.17
OctetString
.1.3.6.1.4.1.36673.8031.1.1.1.18
.1.3.6.1.4.1.36673.8031.1.1.1.19
OctetString
.1.3.6.1.4.1.36673.8031.1.1.1.2
.1.3.6.1.4.1.36673.8031.1.1.1.20
.1.3.6.1.4.1.36673.8031.1.1.1.21
.1.3.6.1.4.1.36673.8031.1.1.1.22
.1.3.6.1.4.1.36673.8031.1.1.1.23
Integer32
.1.3.6.1.4.1.36673.8031.1.1.1.24
Integer32
.1.3.6.1.4.1.36673.8031.1.1.1.25
OctetString
.1.3.6.1.4.1.36673.8031.1.1.1.26
OctetString
.1.3.6.1.4.1.36673.8031.1.1.1.3
OctetString
.1.3.6.1.4.1.36673.8031.1.1.1.4
.1.3.6.1.4.1.36673.8031.1.1.1.5
.1.3.6.1.4.1.36673.8031.1.1.1.6
OctetString
.1.3.6.1.4.1.36673.8031.1.1.1.7
minutesOctetString
.1.3.6.1.4.1.36673.8031.1.1.1.8
OctetString
.1.3.6.1.4.1.36673.8031.1.1.1.9
.1.3.6.1.4.1.36673.8031.1.2
.1.3.6.1.4.1.36673.8031.1.2.1
OctetString
.1.3.6.1.4.1.36673.8031.1.2.1.1
.1.3.6.1.4.1.36673.8031.1.2.1.2
.1.3.6.1.4.1.36673.8031.1.2.1.3
.1.3.6.1.4.1.36673.8031.1.2.1.4
OctetString
.1.3.6.1.4.1.36673.8031.1.2.1.5
OctetString
.1.3.6.1.4.1.36673.8031.1.2.1.6
OctetString
.1.3.6.1.4.1.36673.8031.1.2.1.7
.1.3.6.1.4.1.36673.8031.1.2.1.8
Dependencies (22) 4 direct · 18 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Type Definitions (6)
Enumeration
working-port(1)
protection-port(2)
Enumeration
no-Request(1)
do-Not-Revert(2)
reverse-Request(3)
exercise(4)
wait-To-Restore(5)
manual-Switch(6)
signal-Degrade(7)
working-Signal-Fail(8)
forced-Switch(9)
signal-Fail-for-Protection(10)
lockout-Of-Protection(11)
invalid(12)
Enumeration
local-freeze(1)
local-lockout(2)
Enumeration
one-and-one-Bi(1)
one-plus-one-Bi(2)
one-and-one-Uni(3)
Enumeration
revertive(1)
non-revertive(2)
Enumeration
b-BitMismatchError(1)
d-BitMismatchError(2)
r-BitMismatchError(3)
aps-Rcvd-On-Working(4)
aps-Not-Rcvd-After-State-Change(5)
not-in-Defect-Mode(6)
Notifications / Traps (1)
NameOIDDescription
.1.3.6.1.4.1.36673.8031.0.1
An ipiG8031ActivePathNotify notification is sent when there is changes
in protection switching path (working/protection).