IPFIX-MIB
The IPFIX MIB defines managed objects for IP Flow
Information eXport. These objects provide information about
managed nodes supporting the IPFIX protocol,
for Exporters as well as for Collectors.
Copyright (c) 2012 IETF Trust and the persons identified as
authors of the code. All rights reserved.
Redistribution and use in source and binary forms, with or
without modification, is permitted pursuant to, and subject
to the license terms contained in, the Simplified BSD
License set forth in Section 4.c of the IETF Trust's
Legal Provisions Relating to IETF Documents
(http://trustee.ietf.org/license-info).
- Source file
IPFIX-MIB- Last revised
- Identity
ipfixMIB- Base OID
1.3.6.1.2.1.193
Imported Objects
| ENTITY-MIB | PhysicalIndexOrZero |
| IF-MIB | InterfaceIndexOrZero |
| INET-ADDRESS-MIB | InetAddress InetAddressType InetPortNumber |
| SNMPv2-CONF | MODULE-COMPLIANCE (no object page) OBJECT-GROUP (no object page) |
| SNMPv2-SMI | Counter64 Gauge32 mib-2 MODULE-IDENTITY (no object page) OBJECT-TYPE (no object page) Unsigned32 |
| SNMPv2-TC | DateAndTime TimeStamp |
Net-SNMP examples using the rfc MIB directory Show commands
These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.
Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'IPFIX-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'IPFIX-MIB::ipfixMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPFIX-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPFIX-MIB::ipfixMIB'
Objects (87)
Showing 87 of 87 objects
Object legend
Object type
Icons distinguish tables, entry rows, columns, scalars, and structural nodes.
SNMPv2-TCTruthValue
Syntax
Blue badges identify the value syntax. Connected badges read as defining module and convention.
IF-MIBifIndex
Table index
Green identifies an index object; yellow names its module when the index is defined elsewhere.
r/w
deprecated
obsolete
Access and status
r/w means read-write. Grey labels mark definitions retained for compatibility.
OBS ✓
Observium use
The indicator appears only when Observium directly references that object.
ifOperStatus
.1.3.6.1.2.1…
Names and OIDs
Object names link to their detail pages. Hover or focus a linked name or badge for available definition details.
.1.3.6.1.2.1.193 |
||
.1.3.6.1.2.1.193.1 |
||
.1.3.6.1.2.1.193.1.1 |
||
.1.3.6.1.2.1.193.1.1.1 |
||
.1.3.6.1.2.1.193.1.1.1.1 |
||
|
Unsigned32
|
.1.3.6.1.2.1.193.1.1.1.1.1 |
|
|
Enumeration
|
.1.3.6.1.2.1.193.1.1.1.1.10 |
|
|
secondsSNMPv2-SMIUnsigned32
|
.1.3.6.1.2.1.193.1.1.1.1.11 |
|
|
secondsSNMPv2-SMIUnsigned32
|
.1.3.6.1.2.1.193.1.1.1.1.12 |
|
|
packetsSNMPv2-SMIUnsigned32
|
.1.3.6.1.2.1.193.1.1.1.1.13 |
|
|
packetsSNMPv2-SMIUnsigned32
|
.1.3.6.1.2.1.193.1.1.1.1.14 |
|
|
Unsigned32
|
.1.3.6.1.2.1.193.1.1.1.1.15 |
|
|
Enumeration
|
.1.3.6.1.2.1.193.1.1.1.1.16 |
|
|
Unsigned32
|
.1.3.6.1.2.1.193.1.1.1.1.2 |
|
|
Enumeration
|
.1.3.6.1.2.1.193.1.1.1.1.3 |
|
.1.3.6.1.2.1.193.1.1.1.1.4 |
||
|
Enumeration
|
.1.3.6.1.2.1.193.1.1.1.1.5 |
|
.1.3.6.1.2.1.193.1.1.1.1.6 |
||
.1.3.6.1.2.1.193.1.1.1.1.7 |
||
.1.3.6.1.2.1.193.1.1.1.1.8 |
||
.1.3.6.1.2.1.193.1.1.1.1.9 |
||
.1.3.6.1.2.1.193.1.1.2 |
||
.1.3.6.1.2.1.193.1.1.2.1 |
||
|
Unsigned32
|
.1.3.6.1.2.1.193.1.1.2.1.1 |
|
|
Unsigned32
|
.1.3.6.1.2.1.193.1.1.2.1.2 |
|
|
Unsigned32
|
.1.3.6.1.2.1.193.1.1.2.1.3 |
|
.1.3.6.1.2.1.193.1.1.2.1.4 |
||
.1.3.6.1.2.1.193.1.1.3 |
||
.1.3.6.1.2.1.193.1.1.3.1 |
||
|
Unsigned32
|
.1.3.6.1.2.1.193.1.1.3.1.1 |
|
|
Unsigned32
|
.1.3.6.1.2.1.193.1.1.3.1.2 |
|
|
Unsigned32
|
.1.3.6.1.2.1.193.1.1.3.1.3 |
|
.1.3.6.1.2.1.193.1.1.3.1.4 |
||
|
Bits
|
.1.3.6.1.2.1.193.1.1.3.1.5 |
|
.1.3.6.1.2.1.193.1.1.4 |
||
.1.3.6.1.2.1.193.1.1.4.1 |
||
|
Unsigned32
|
.1.3.6.1.2.1.193.1.1.4.1.1 |
|
|
Enumeration
|
.1.3.6.1.2.1.193.1.1.4.1.2 |
|
.1.3.6.1.2.1.193.1.1.5 |
||
.1.3.6.1.2.1.193.1.1.5.1 |
||
|
Unsigned32
|
.1.3.6.1.2.1.193.1.1.5.1.1 |
|
.1.3.6.1.2.1.193.1.1.5.1.2 |
||
|
secondsSNMPv2-SMIUnsigned32
|
.1.3.6.1.2.1.193.1.1.5.1.3 |
|
|
secondsSNMPv2-SMIUnsigned32
|
.1.3.6.1.2.1.193.1.1.5.1.4 |
|
.1.3.6.1.2.1.193.1.1.6 |
||
.1.3.6.1.2.1.193.1.1.6.1 |
||
|
Unsigned32
|
.1.3.6.1.2.1.193.1.1.6.1.1 |
|
|
Unsigned32
|
.1.3.6.1.2.1.193.1.1.6.1.2 |
|
.1.3.6.1.2.1.193.1.1.6.1.3 |
||
.1.3.6.1.2.1.193.1.1.6.1.4 |
||
.1.3.6.1.2.1.193.1.1.6.1.5 |
||
|
Enumeration
|
.1.3.6.1.2.1.193.1.1.6.1.6 |
|
.1.3.6.1.2.1.193.1.1.7 |
||
.1.3.6.1.2.1.193.1.1.7.1 |
||
|
Unsigned32
|
.1.3.6.1.2.1.193.1.1.7.1.1 |
|
|
Unsigned32
|
.1.3.6.1.2.1.193.1.1.7.1.2 |
|
|
ObjectIdentifier
|
.1.3.6.1.2.1.193.1.1.7.1.3 |
|
.1.3.6.1.2.1.193.1.2 |
||
.1.3.6.1.2.1.193.1.2.1 |
||
.1.3.6.1.2.1.193.1.2.1.1 |
||
|
bytes/secondSNMPv2-SMIGauge32
|
.1.3.6.1.2.1.193.1.2.1.1.1 |
|
|
packetsSNMPv2-SMICounter64
|
.1.3.6.1.2.1.193.1.2.1.1.2 |
|
|
bytesSNMPv2-SMICounter64
|
.1.3.6.1.2.1.193.1.2.1.1.3 |
|
.1.3.6.1.2.1.193.1.2.1.1.4 |
||
.1.3.6.1.2.1.193.1.2.1.1.5 |
||
.1.3.6.1.2.1.193.1.2.1.1.6 |
||
.1.3.6.1.2.1.193.1.2.1.1.7 |
||
.1.3.6.1.2.1.193.1.2.1.1.8 |
||
.1.3.6.1.2.1.193.1.2.1.1.9 |
||
.1.3.6.1.2.1.193.1.2.2 |
||
.1.3.6.1.2.1.193.1.2.2.1 |
||
.1.3.6.1.2.1.193.1.2.2.1.1 |
||
.1.3.6.1.2.1.193.1.2.2.1.2 |
||
.1.3.6.1.2.1.193.1.2.3 |
||
.1.3.6.1.2.1.193.1.2.3.1 |
||
.1.3.6.1.2.1.193.1.2.3.1.1 |
||
.1.3.6.1.2.1.193.1.2.3.1.2 |
||
.1.3.6.1.2.1.193.1.2.3.1.3 |
||
.1.3.6.1.2.1.193.1.2.3.1.4 |
||
.1.3.6.1.2.1.193.1.2.4 |
||
.1.3.6.1.2.1.193.1.2.4.1 |
||
.1.3.6.1.2.1.193.1.2.4.1.1 |
||
.1.3.6.1.2.1.193.1.2.4.1.2 |
||
.1.3.6.1.2.1.193.1.2.4.1.3 |
||
.1.3.6.1.2.1.193.2 |
||
.1.3.6.1.2.1.193.2.1 |
||
.1.3.6.1.2.1.193.2.2 |
Dependencies (11) 6 direct · 5 transitive Show tree and compile order Hide dependency details
Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.
Dependency tree
Dependency-first compile order
- SNMPv2-SMIrfc
- SNMPv2-TCrfc
- IANA-ENTITY-MIBrfc
- SNMPv2-CONFrfc
- SNMP-FRAMEWORK-MIBrfc
- UUID-TC-MIBrfc
- ENTITY-MIBrfc
- IANAifType-MIBrfc
- SNMPv2-MIBrfc
- IF-MIBrfc
- INET-ADDRESS-MIBrfc
- IPFIX-MIBrfcselected
Conformance Groups (4)
Compliance Statements (2)
OID
.1.3.6.1.2.1.193.2.1.1An implementation that builds an IPFIX Collector
that complies with this module MUST implement the objects
defined in the mandatory group ipfixCommonGroup.
The implementation of all objects in the other groups is
optional and depends on the corresponding functionality
implemented in the equipment.
An implementation that is compliant with this MIB module
is limited to using only the values TCP (6), UDP (17), and
SCTP (132) in the ipfixTransportSessionProtocol object
because these are the only protocols currently specified
for usage within IPFIX (see RFC 5101).
that complies with this module MUST implement the objects
defined in the mandatory group ipfixCommonGroup.
The implementation of all objects in the other groups is
optional and depends on the corresponding functionality
implemented in the equipment.
An implementation that is compliant with this MIB module
is limited to using only the values TCP (6), UDP (17), and
SCTP (132) in the ipfixTransportSessionProtocol object
because these are the only protocols currently specified
for usage within IPFIX (see RFC 5101).
Required groups
| mandatory | ipfixCommonGroup | |
| optional | ipfixCommonStatsGroup |
These objects should be implemented if the statistics function is implemented in the equipment. |
OID
.1.3.6.1.2.1.193.2.1.2An implementation that builds an IPFIX Exporter that
complies with this module MUST implement the objects defined
in the mandatory group ipfixCommonGroup. The implementation
of all other objects depends on the implementation of the
corresponding functionality in the equipment.
complies with this module MUST implement the objects defined
in the mandatory group ipfixCommonGroup. The implementation
of all other objects depends on the implementation of the
corresponding functionality in the equipment.
Required groups
| mandatory | ipfixCommonGroup | |
| mandatory | ipfixExporterGroup | |
| optional | ipfixCommonStatsGroup |
These objects should be implemented if the statistics function is implemented in the equipment. |
| optional | ipfixExporterStatsGroup |
These objects MUST be implemented if statistics functions are implemented in the equipment. |