IPE-DOT3OAM-MIB Table View

This table contains status of the OAM capabilities of the
interface.

asDot3OamPortEntry row .1.3.6.1.4.1.119.2.3.69.501.3.46.1.1

Entries in the table are created automatically.

Indexes

asDot3OamPortIfIndex

Column	Syntax	OID
asDot3OamPortIfIndex Index of this table.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.119.2.3.69.501.3.46.1.1.1
asDot3OamPortNEAddress reserved.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.119.2.3.69.501.3.46.1.1.2
asDot3OamPortOperStatus This value is always disabled(1) if OAM is disabled on the interface via the provDot3OamPortEnabled. If the link has detected a fault and is transmitting OAMPDUs with a link fault indication or the interf…	Enumeration Enumerated Values: 0 invalid 1 disabled 2 linkFault 3 passiveWait 4 activeSendLocal 5 sendLocalAndRemote 6 sendLocalAndRemoteOK 7 oamPeeringLocallyRejected 8 oamPeeringRemotelyRejected 9 operational 10 nonOperHalfDuplex	.1.3.6.1.4.1.119.2.3.69.501.3.46.1.1.3
asDot3OamPortMaxOamPduSize The largest OAMPDU that the OAM entity supports. OA entities exchange maximum OAMPDU sizes and negotiate to use the smaller of the two maximum OAMPDU sizes between the peers.	octetsUnsigned32 Constraints: range: 64-1518	.1.3.6.1.4.1.119.2.3.69.501.3.46.1.1.4
asDot3OamPortConfigRevision The configuration revision of the OAM entity as reflected in the latest OAMPDU sent by the OAM entity. The config revision is used by OAM entities to indicate that configuration changes have occurred, which might requir…	Unsigned32 Constraints: range: 0-65535	.1.3.6.1.4.1.119.2.3.69.501.3.46.1.1.5
asDot3OamPortFunctionsSupported The OAM functions supported on this interface. OAM consists of separate functional sets beyond the basic discovery process that is always required. These functional groups can be supported independently by any implement…	Bits Enumerated Values: 0 unidirectionalSupport 1 loopbackSupport 2 eventSupport 3 variableSupport	.1.3.6.1.4.1.119.2.3.69.501.3.46.1.1.6

This table contains information about the OAM peer for a
particular interface. OAM entities communicates with a single OAM
peer entity on Ethernet links.

asDot3OamPeerEntry row .1.3.6.1.4.1.119.2.3.69.501.3.46.2.1

An entry in the table containing information on the peer entity
for a single interface.

Note that there is at most on OAM peer for each interface. Peer
information is not reliable when asDot3OamPortStatus i…

Indexes

asDot3OamPeerIfIndex

Column	Syntax	OID
asDot3OamPeerIfIndex Index of this table.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.119.2.3.69.501.3.46.2.1.1
asDot3OamPeerNEAddress reserved.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.119.2.3.69.501.3.46.2.1.2
asDot3OamPeerMacAddress The MAC address of the peer OAM entity. The MAC address is derived from the most recently received OAMPDU.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.119.2.3.69.501.3.46.2.1.3
asDot3OamPeerVendorOui The OUI of the OAM peer as reflected in the latest Information OAMPDU received with a Local Information TLV. The OUI can be used to identify the vendor of the remote OA entity. This value is initialized to three octets …	OctetString Constraints: range: 3-3	.1.3.6.1.4.1.119.2.3.69.501.3.46.2.1.4
asDot3OamPeerVendorInfo The Vendor Info of the OAM peer as reflected in the latest Information OAMPDU received with a Local Information TLV. The semantics of the Vendor Information field is proprietary and specific to the vendor. This value is…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.119.2.3.69.501.3.46.2.1.5
asDot3OamPeerMode The mode of the OAM peer as reflected in the latest Information OAMPDU received with a Local Information TLV. The mode of the peer can be determined from the Configuration field in the Local Information TLV of the last …	Enumeration Enumerated Values: 0 invalid 1 passive 2 active 3 unknown	.1.3.6.1.4.1.119.2.3.69.501.3.46.2.1.6
asDot3OamPeerMaxOamPduSize The maximum size of OAMPDU supported by the peer as reflected in the latest Information OAMPDU received with a Local Information TLV. Ethernet OAM on this interface must not use OAMPDUs that exceed this size. The maximu…	octetsUnsigned32 Constraints: range: 0-0 range: 64-1518	.1.3.6.1.4.1.119.2.3.69.501.3.46.2.1.7
asDot3OamPeerConfigRevision The configuration revision of the OAM peer as reflected in the latest OAMPDU. This attribute is changed by the peer whenever it has a local configuration change for Ethernet OA on this interface. The configuration revis…	Unsigned32 Constraints: range: 0-65535	.1.3.6.1.4.1.119.2.3.69.501.3.46.2.1.8
asDot3OamPeerFunctionsSupported The OAM functions supported on the interface. OAM consists of separate functionality sets above the basic discovery process. This value indicates the capabilities of the peer OAM entity with respect to these functions. …	Bits Enumerated Values: 0 unidirectionalSupport 1 loopbackSupport 2 eventSupport 3 variableSupport	.1.3.6.1.4.1.119.2.3.69.501.3.46.2.1.9

This table contains statistics for the OAM function on a
particular interface. There is an entry in the table for every
asDot3OamPortTable.

asDot3OamPortStatsEntry row .1.3.6.1.4.1.119.2.3.69.501.3.46.3.1

An entry in the table containing statistics information on the
Ethernet OAM function for a single interface. Entries are
automatically created for every entry in the asDot3OamPortTable.
Counters are maintained across tr…

Indexes

asDot3OamPortStatsIfIndex

Column	Syntax	OID
asDot3OamPortStatsIfIndex Index of this table.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.119.2.3.69.501.3.46.3.1.1
asDot3OamPortStatsNEAddress reserved.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.119.2.3.69.501.3.46.3.1.2
asDot3OamInformationTx A count of the number of Information OAMPDUs transmitted on the interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.119.2.3.69.501.3.46.3.1.3
asDot3OamInformationRx A count of the number of Information OAMPDUs received on the interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.119.2.3.69.501.3.46.3.1.4
asDot3OamUniqueEventNotifTx A count of the number of unique Event OAMPDUs transmitted on the interface. Event Notifications may be sent in duplicate to increase the probability of successfully being received, given the possibility that a frame may…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.119.2.3.69.501.3.46.3.1.5
asDot3OamUniqueEventNotifRx A count of the number of unique Event OAMPDUs received on the interface. Event Notifications may be sent in duplicate to increase the probability of successfully being received, given the possibility that a frame may be…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.119.2.3.69.501.3.46.3.1.6
asDot3OamDuplicateEventNotifTx A count of the number of duplicate Event OAMPDUs transmitted on the interface. Event Notification OAMPDUs may be sent in duplicate to increase the probability of successfully being received, given the possibility that a…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.119.2.3.69.501.3.46.3.1.7
asDot3OamDuplicateEventNotifRx A count of the number of duplicate Event OAMPDUs received on the interface. Event Notification OAMPDUs may be sent in duplicate to increase the probability of successfully being received, given the possibility that a fr…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.119.2.3.69.501.3.46.3.1.8
asDot3OamLoopbackControlTx A count of the number of Loopback Control OAMPDUs transmitted on the interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.119.2.3.69.501.3.46.3.1.9
asDot3OamLoopbackControlRx A count of the number of Loopback Control OAMPDUs received on the interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.119.2.3.69.501.3.46.3.1.10
asDot3OamVariableRequestTx A count of the number of Variable Request OAMPDUs transmitted on the interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.119.2.3.69.501.3.46.3.1.11
asDot3OamVariableRequestRx A count of the number of Variable Request OAMPDUs received on the interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.119.2.3.69.501.3.46.3.1.12
asDot3OamVariableResponseTx A count of the number of Variable Response OAMPDUs transmitted on the interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.119.2.3.69.501.3.46.3.1.13
asDot3OamVariableResponseRx A count of the number of Variable Response OAMPDUs received on the interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.119.2.3.69.501.3.46.3.1.14
asDot3OamOrgSpecificTx A count of the number of Organization Specific OAMPDUs transmitted on the interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.119.2.3.69.501.3.46.3.1.15
asDot3OamOrgSpecificRx A count of the number of Organization Specific OAMPDUs received on the interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.119.2.3.69.501.3.46.3.1.16
asDot3OamUnsupportedCodesTx A count of the number of OAMPDUs transmitted on the interface with an unsupported op-code.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.119.2.3.69.501.3.46.3.1.17
asDot3OamUnsupportedCodesRx A count of the number of OAMPDUs received on the interface with an unsupported op-code.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.119.2.3.69.501.3.46.3.1.18
asDot3OamFramesLostDueToOam A count of the number of frames that were dropped by the OA multiplexer. Since the OAM multiplexer has multiple inputs and a single output, there may be cases where frames are dropped due to transmit resource contention…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.119.2.3.69.501.3.46.3.1.19

This table contains alarm & status information of the
interface.

asDot3OamPortAlarmEntry row .1.3.6.1.4.1.119.2.3.69.501.3.46.4.1

An entry in the table containing alarm & status information on
the Ethernet OAM function for a single interface. Entries are
automatically created for enery entry in the asDot3OamPortTable.

Indexes

asDot3OamPortAlarmIfIndex

Column	Syntax	OID
asDot3OamPortAlarmIfIndex Index of this table.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.119.2.3.69.501.3.46.4.1.1
asDot3OamPortAlarmNEAddress reserved.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.119.2.3.69.501.3.46.4.1.2
asDot3OamPortLinkOamDown The alarm status of the OAM function status. When the Discovery State of the interface is not in SEND_ANY, the object becomes alarm state.	SeverityValue Type Values: 1 cleared 2 indetermine 3 critical 4 major 5 minor 6 warning	.1.3.6.1.4.1.119.2.3.69.501.3.46.4.1.3
asDot3OamPortLocalDyingGasp Generating Dying Gasp OAMPDU status. If the OAM entity sends the DyingGasp OAMPDUs, the object will return the value 'generated'.	Enumeration Enumerated Values: 0 invalid 1 normal 2 generated	.1.3.6.1.4.1.119.2.3.69.501.3.46.4.1.4
asDot3OamPortLocalCriticalEvent Generating Critical Event OAMPDU status. If the OAM entity sends the CriticalEvent OAMPDUs, the object will return the value 'generated'.	Enumeration Enumerated Values: 0 invalid 1 normal 2 generated	.1.3.6.1.4.1.119.2.3.69.501.3.46.4.1.5
asDot3OamPortRemoteErroredSymbolEvent Receiving Errored Symbol Event OAMPDU status. If the OAM entity receives the ErroredSymbolEvent OAMPDUs from peer, the object will show the value 'received'.	Enumeration Enumerated Values: 0 invalid 1 normal 2 received	.1.3.6.1.4.1.119.2.3.69.501.3.46.4.1.6
asDot3OamPortRemoteErroredFramePeriodEvent Receiving Errored Frame Period Event OAMPDU status. If the OAM entity receives the ErroredFramePeriodEvent OAMPDUs from peer, the object will show the value 'received'.	Enumeration Enumerated Values: 0 invalid 1 normal 2 received	.1.3.6.1.4.1.119.2.3.69.501.3.46.4.1.7
asDot3OamPortRemoteErroredFrameEvent Receiving Errored Frame Event OAMPDU status. If the OAM entity receives the ErroredFrameEvent OAMPDUs from peer, the object will show the value 'received'.	Enumeration Enumerated Values: 0 invalid 1 normal 2 received	.1.3.6.1.4.1.119.2.3.69.501.3.46.4.1.8
asDot3OamPortRemoteErroredFrameSecondEvent Receiving Errored Frame Second Event OAMPDU status. If the OAM entity receives the ErroredFrameSecondEvent OAMPDUs from peer, the object will show the value 'received'.	Enumeration Enumerated Values: 0 invalid 1 normal 2 received	.1.3.6.1.4.1.119.2.3.69.501.3.46.4.1.9
asDot3OamPortRemoteLinkFault Receiving Link Fault OAMPDU. If the OAM entity receives the LinkFault OAMPDUs from peer, the object will report Link Fault Alarm of the interface.	SeverityValue Type Values: 1 cleared 2 indetermine 3 critical 4 major 5 minor 6 warning	.1.3.6.1.4.1.119.2.3.69.501.3.46.4.1.10
asDot3OamPortRemoteDyingGasp Receiving DyingGasp OAMPDU. If the OAM entity receives the DyingGasp OAMPDUs from peer, the object will report DyingGasp Alarm of the interface.	SeverityValue Type Values: 1 cleared 2 indetermine 3 critical 4 major 5 minor 6 warning	.1.3.6.1.4.1.119.2.3.69.501.3.46.4.1.11
asDot3OamPortRemoteCriticalEvent Receiving Critial Event OAMPDU. If the OAM entity receives the CriticalEvent OAMPDUs from peer, the object will report CriticalEvent Alarm of the interface.	SeverityValue Type Values: 1 cleared 2 indetermine 3 critical 4 major 5 minor 6 warning	.1.3.6.1.4.1.119.2.3.69.501.3.46.4.1.12

This table contains provisioning objects for the OAM function on
a particular interface.

provDot3OamPortEntry row .1.3.6.1.4.1.119.2.3.69.501.5.46.1.1

An entry in the table that contains configuration on the
Ethernet OAM function for sngle interface. Entries in the table
are created automatically for each interface.

Indexes

provDot3OamPortIfIndex

Column	Syntax	OID
provDot3OamPortIfIndex Index of this table.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.119.2.3.69.501.5.46.1.1.1
provDot3OamPortNEAddress reserved.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.119.2.3.69.501.5.46.1.1.2
provDot3OamPortEnabled This object is used to provision the default administrative OAM mode for the interface. This object represents the desired state of OAM for this interface. This object always starts disabled state until e…	EnableDisableValuer/w Type Values: 0 invalid 1 disable 2 enable	.1.3.6.1.4.1.119.2.3.69.501.5.46.1.1.3
provDot3OamPortMode This object configures the mode of OAM operation for this interface. OAM on Ethernet interfaces may be in 'active' mode or 'passive' mode. These two modes differ in that active mode provides additional capabilities to i…	Enumerationr/w Enumerated Values: 1 passive 2 active	.1.3.6.1.4.1.119.2.3.69.501.5.46.1.1.4
provDot3OamTxPduRepetitionTimes This object configures the number of notification OAMPDUs when the critical event occurs.	Integer32r/w Constraints: range: 1-10	.1.3.6.1.4.1.119.2.3.69.501.5.46.1.1.5
provDot3OamLocalLinkLostTimer This object configures the detection time of losing the OAM Link state.	secondsInteger32r/w Constraints: range: 1-10	.1.3.6.1.4.1.119.2.3.69.501.5.46.1.1.6
provDot3OamTxPduCounts This object configures the maximum transmission counts of slow protocol PDUs excluding DyingGasp and Critical Event PDUs.	Integer32r/w Constraints: range: 1-10	.1.3.6.1.4.1.119.2.3.69.501.5.46.1.1.7
provDot3OamLoopbackIgnoreRx If ignore(1) is set, the OAM entity ignores Loopback Request OAMPDUs from peer OAM entity, and the OAM entity can only initiate loopback locally. It is necessary to change the value to process(2) to accept loopback requ…	Enumerationr/w Enumerated Values: 1 ignore 2 process	.1.3.6.1.4.1.119.2.3.69.501.5.46.1.1.8
provDot3OamLlfCriticalEvent If enable is set, the OAM entity sends OAMPDUs with Critical Event flag when the LLF control is notified.	EnableDisableValuer/w Type Values: 0 invalid 1 disable 2 enable	.1.3.6.1.4.1.119.2.3.69.501.5.46.1.1.9

Ethernet OAM includes the ability to generate and receive Event
Notification OAMPDUs to indicate various link problems. This
table contains the mechanisms to enable Event Notifications.
There is one entry in the table for every entry in
asDot3OamPortTable. The values in the table are maintained across
changes to asDot3OamPortStatus.

provDot3OamEventEntry row .1.3.6.1.4.1.119.2.3.69.501.5.46.3.1

Entries are automatically created and deleted from this table,
and exists whenever the OAM entity supports Ethernet OA events.

Event configuration controls when the local management entity
sends Event Notif…

Indexes

provDot3OamEventIfIndex

Column	Syntax	OID
provDot3OamEventIfIndex Index of this table.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.119.2.3.69.501.5.46.3.1.1
provDot3OamEventNEAddress reserved.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.119.2.3.69.501.5.46.3.1.2
provDot3OamErrSymPeriodEvNotifEnable If enable, the OAM entity should send an Event Notification OAMPDU when an Errored Symbol Period Event occurs.	EnableDisableValuer/w Type Values: 0 invalid 1 disable 2 enable	.1.3.6.1.4.1.119.2.3.69.501.5.46.3.1.3
provDot3OamErrFramePeriodEvNotifEnable If enable, the OAM entity should send an Event Notification OAMPDU when an Errored Frame Period Event occurs.	EnableDisableValuer/w Type Values: 0 invalid 1 disable 2 enable	.1.3.6.1.4.1.119.2.3.69.501.5.46.3.1.4
provDot3OamErrFrameEvNotifEnable If enable, the OAM entity should send an Event Notification OAMPDU when an Errored Frame Event occurs.	EnableDisableValuer/w Type Values: 0 invalid 1 disable 2 enable	.1.3.6.1.4.1.119.2.3.69.501.5.46.3.1.5
provDot3OamErrFrameSecsEvNotifEnable If enable, the local OAM entity should send an Event Notification OAMPDU when an Errored Frame Seconds Event occurs.	EnableDisableValuer/w Type Values: 0 invalid 1 disable 2 enable	.1.3.6.1.4.1.119.2.3.69.501.5.46.3.1.6
provDot3OamDyingGaspEnable If enable, the local OAM entity should attempt to indicate a dying gasp via the OAMPDU flags to its peer OAM entity when a dying gasp event occurs.	EnableDisableValuer/w Type Values: 0 invalid 1 disable 2 enable	.1.3.6.1.4.1.119.2.3.69.501.5.46.3.1.7
provDot3OamCriticalEventEnable If enable, the local OAM entity should attempt to indicate a critical event via the OAMPDU flags to its peer OAM entity when a critical event occurs.	EnableDisableValuer/w Type Values: 0 invalid 1 disable 2 enable	.1.3.6.1.4.1.119.2.3.69.501.5.46.3.1.8

This table contains the On-demand Loopback control objects for
Ethernet OAM functions.

maintDot3OamLoopbackEntry row .1.3.6.1.4.1.119.2.3.69.501.6.46.1.1

The system can execute up to 5 loopback functions
simultaneously, so 5 entries are automatically created when agent
boots.

Indexes

maintDot3OamLoopbackIndex

Column	Syntax	OID
maintDot3OamLoopbackIndex Index of this table.	Integer32 Constraints: range: 1-5	.1.3.6.1.4.1.119.2.3.69.501.6.46.1.1.1
maintDot3OamLoopbackNEAddress reserved.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.119.2.3.69.501.6.46.1.1.2
maintDot3OamLoopbackIfIndex Set Index of target interface. The default value of this object is '0', and the value is necessary for executing loopback function.	IF-MIBInterfaceIndexOrZeror/w Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.119.2.3.69.501.6.46.1.1.3
maintDot3OamLoopbackExecute The object is used to execute loopback function. Setting to 'execute' to start loopback testing.	Enumerationr/w Enumerated Values: 1 start 2 stop	.1.3.6.1.4.1.119.2.3.69.501.6.46.1.1.4
maintDot3OamLoopbackFrames The object is used to configure the number of transmit loopback frames.	Unsigned32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.119.2.3.69.501.6.46.1.1.5
maintDot3OamLoopbackPDULength The length of Loopback OAMPDU.	Unsigned32r/w Constraints: range: 64-1518	.1.3.6.1.4.1.119.2.3.69.501.6.46.1.1.6
maintDot3OamLoopbackTxCounts The object is used to configure the number of transmit frames per second.	Unsigned32r/w Constraints: range: 1-10	.1.3.6.1.4.1.119.2.3.69.501.6.46.1.1.7
maintDot3OamLoopbackTimeout The object is used to configure the time of detecting timeout of loopback testing.	secondsUnsigned32r/w Constraints: range: 1-10	.1.3.6.1.4.1.119.2.3.69.501.6.46.1.1.8

This table contains the results of loopback testing. The results
will be updated when the loopback testing is completed.

maintDot3OamLoopbackResultEntry row .1.3.6.1.4.1.119.2.3.69.501.6.46.2.1

The entries are automatically created when the agent boots. And
the index of the entry is identical to the
'maintDot3OamLoopbackIndex'.

Indexes

maintDot3OamLoopbackResultIndex

Column	Syntax	OID
maintDot3OamLoopbackResultIndex Index of this table.	Integer32 Constraints: range: 1-5	.1.3.6.1.4.1.119.2.3.69.501.6.46.2.1.1
maintDot3OamLoopbackResultNEAddress reserved.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.119.2.3.69.501.6.46.2.1.2
maintDot3OamLoopbackResultTxFrames The number of transmitted loopback OAMPDUs.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.119.2.3.69.501.6.46.2.1.3
maintDot3OamLoopbackResultTxFrameOctets The total octets of transmitted loopback OAMPDUs.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.119.2.3.69.501.6.46.2.1.4
maintDot3OamLoopbackResultRxFrames The number of received loopback OAMPDUs.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.119.2.3.69.501.6.46.2.1.5
maintDot3OamLoopbackResultRxFrameOctets The total octets of received loopback OAMPDUs.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.119.2.3.69.501.6.46.2.1.6
maintDot3OamLoopbackResultRxErroredFrames The number of received errored OAMPDUs.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.119.2.3.69.501.6.46.2.1.7
maintDot3OamLoopbackResultExecStatus The status of loopback test result. 'noLoopback' means no loopback test is executing. 'executing' represents the loopback test is in progress, and the new loopback request will be rejected. 'failed' means the previous …	Enumeration Enumerated Values: 1 noLoopback 2 failed 3 completed 4 executing	.1.3.6.1.4.1.119.2.3.69.501.6.46.2.1.8
maintDot3OamLoopbackResultLastExecute The date and time of executing loopback test.	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.119.2.3.69.501.6.46.2.1.9

This table contains control objects for loopback which was
triggered by peer node.

maintDot3OamLoopbackPortEntry row .1.3.6.1.4.1.119.2.3.69.501.6.46.3.1

Indexes

maintDot3OamLoopbackPortIfIndex

Column	Syntax	OID
maintDot3OamLoopbackPortIfIndex Index of this table.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.119.2.3.69.501.6.46.3.1.1
maintDot3OamLoopbackPortNEAddress reserved.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.119.2.3.69.501.6.46.3.1.2
maintDot3OamLoopbackPortControl This object controls the loopback function. Writing the value 'initiateLoopback' causes the local OAM entity to start the loopback process with its peer. This value can only be written when the maintDot3O…	Enumerationr/w Enumerated Values: 0 invalid 1 noOperation 2 initiateLoopback 3 terminateLoopback	.1.3.6.1.4.1.119.2.3.69.501.6.46.3.1.3
maintDot3OamLoopbackPortStatus The loopback status of the local OAM entity. This object returns the loopback point. This means that the value 'remoteLoopback' represents the local OAM entity is initiator of loopback and the loopback po…	Enumeration Enumerated Values: 0 invalid 1 noLoopback 2 remoteLoopback 3 localLoopback	.1.3.6.1.4.1.119.2.3.69.501.6.46.3.1.4