INFRATEC-RMS-MIB Table View

The digitalInTable contains all information about 
physical inputs Digital In 1-8.

digitalInEntry row .1.3.6.1.4.1.1909.10.2.1.1

Each entry contains information for each input

Indexes

digitalInIndex

Column	Syntax	OID
digitalInIndexmandatory Index of Digital Input	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1909.10.2.1.1.1
digitalInDescrmandatory Descriptive name of Digital Input	r/w	.1.3.6.1.4.1.1909.10.2.1.1.2
digitalInStatemandatory Current state of Digital Input	Enumeration Enumerated Values: 1 off 2 on	.1.3.6.1.4.1.1909.10.2.1.1.3
digitalInLastChangemandatory Timestamp of last change	RFC1155-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1909.10.2.1.1.4
digitalInChangesmandatory How many times the input changed since system startup	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1909.10.2.1.1.5

The alertInTable contains all information about 
physical inputs Alert In 1-4.

alertInEntry row .1.3.6.1.4.1.1909.10.2.2.1

Each entry contains the values for an alert input

Indexes

alertInIndex

Column	Syntax	OID
alertInIndexmandatory Index of Alert Input	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1909.10.2.2.1.1
alertInDescrmandatory Descriptive name of Alert Input	r/w	.1.3.6.1.4.1.1909.10.2.2.1.2
alertInStatemandatory Current state of Alert Input	Enumeration Enumerated Values: 1 off 2 on	.1.3.6.1.4.1.1909.10.2.2.1.3
alertInLastChangemandatory Timestamp of last change	RFC1155-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1909.10.2.2.1.4
alertInChangesmandatory How many times the input changed since system startup	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1909.10.2.2.1.5
alertInResetmandatory Reset an Alert In by writing 2 in here. Most sensors use to store an alarm, which only can be deleted by resetting the sensor respectively the whole signalling line. This is achieved by powering-off this signalling …	Enumerationr/w Enumerated Values: 1 default 2 alertIn-reset	.1.3.6.1.4.1.1909.10.2.2.1.6

The upsInputTable contains all information about 
physical inputs UPS In 1-2.

upsInEntry row .1.3.6.1.4.1.1909.10.2.3.1

Each entry contains the values for an UPS input

Indexes

upsInIndex

Column	Syntax	OID
upsInIndexmandatory Index of UPS Input	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1909.10.2.3.1.1
upsInDescrmandatory Name of UPS Input	r/w	.1.3.6.1.4.1.1909.10.2.3.1.2
upsInStatemandatory Current state of UPS Input	Enumeration Enumerated Values: 1 off 2 on	.1.3.6.1.4.1.1909.10.2.3.1.3
upsInLastChangemandatory Timestamp of last change	RFC1155-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1909.10.2.3.1.4
upsInChangesmandatory How many times the input changed since system startup	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1909.10.2.3.1.5

The table used for describing the digital outputs

outputEntry row .1.3.6.1.4.1.1909.10.3.1.1

Each entry contains the description of an digital output

Indexes

outputIndex

Column	Syntax	OID
outputIndexmandatory Index of digital output	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1909.10.3.1.1.1
outputDescrmandatory Descriptive Name of one digital output	r/w	.1.3.6.1.4.1.1909.10.3.1.1.2
outputEffectmandatory Determines the way the physical digital output is influenced by one or more filter results. For this the result of the logical output block can be passed thru (thru) or inverted (invert). Furthermore it is possible to…	Enumerationr/w Enumerated Values: 1 off 2 on 3 thru 4 invert	.1.3.6.1.4.1.1909.10.3.1.1.3
outputLastChangemandatory Timestamp of last change	RFC1155-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1909.10.3.1.1.4
outputChangesmandatory How many times an output changed since system startup	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1909.10.3.1.1.5
outputLogicmandatory Each output can be controlled by a couple of filters, which are combined in a boolean operation. The logic operation (and/or) can be set up with this entry.	Enumerationr/w Enumerated Values: 1 and 2 or	.1.3.6.1.4.1.1909.10.3.1.1.6
outputStatemandatory Current state of digital output	Enumeration Enumerated Values: 1 open 2 short	.1.3.6.1.4.1.1909.10.3.1.1.7

The table used for describing the list of filters,
which effect an output.

outputLogicEntry row .1.3.6.1.4.1.1909.10.3.2.1

Each entry contains the description of one logic and/or
element

Indexes

outputLogicOutputIndex outputLogicFilterIndex

Column	Syntax	OID
outputLogicOutputIndexmandatory Index of the output	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1909.10.3.2.1.1
outputLogicFilterIndexmandatory Index of the filter	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1909.10.3.2.1.2
outputLogicFiltermandatory Determines, if this filter works on the logical and/or element. Default is off.	Enumerationr/w Enumerated Values: 1 off 2 on	.1.3.6.1.4.1.1909.10.3.2.1.3

Table to hold the information about temperature inputs

tempEntry row .1.3.6.1.4.1.1909.10.4.1.1

Each entry contains information about one temperature
input

Indexes

tempIndex

Column	Syntax	OID
tempIndexmandatory Index of temperature input	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1909.10.4.1.1.1
tempDescrmandatory Descriptive name of temperature input	r/w	.1.3.6.1.4.1.1909.10.4.1.1.2
tempValuemandatory Current temperature in degree celsius. If 655 no sensor is connected.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1909.10.4.1.1.3

Table to hold the information about humidity inputs

humidEntry row .1.3.6.1.4.1.1909.10.5.1.1

Each entry contains information about one humidity
input

Indexes

humidIndex

Column	Syntax	OID
humidIndexmandatory Index of humidity input	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1909.10.5.1.1.1
humidDescrmandatory Descriptive name of the humidity input	r/w	.1.3.6.1.4.1.1909.10.5.1.1.2
humidValuemandatory Current humidity in percent rel. humidity. If 255 no sensor is connected.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1909.10.5.1.1.3

Table to hold the information about the mains inputs

mainsEntry row .1.3.6.1.4.1.1909.10.6.1.1

Each entry contains information about one mains input

Indexes

mainsIndex

Column	Syntax	OID
mainsIndexmandatory Index of mains input	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1909.10.6.1.1.1
mainsDescrmandatory Descriptive name of the mains input	r/w	.1.3.6.1.4.1.1909.10.6.1.1.2
mainsValuemandatory Current voltage of mains input in volt. If 13 or 255 no voltage is detected.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1909.10.6.1.1.3

Table containing all information about the defined filters

filterEntry row .1.3.6.1.4.1.1909.10.7.1.1

Each entry contains the description of one filter

Indexes

filterIndex

Column	Syntax	OID
filterIndexmandatory Index of the filter entry	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1909.10.7.1.1.1
filterDescrmandatory Descriptive name of filter	r/w	.1.3.6.1.4.1.1909.10.7.1.1.2
filterResultmandatory Current filter result, i.e. result of all 'or'ed inputs - see block diagram	Enumeration Enumerated Values: 1 false 2 true	.1.3.6.1.4.1.1909.10.7.1.1.3
filterEffectmandatory Determines the way the filter is used for further operation Can be switched off, passed thru or inverted.	Enumerationr/w Enumerated Values: 1 off 2 thru 3 invert	.1.3.6.1.4.1.1909.10.7.1.1.4
filterTrapmandatory Determines the way of trap notification to management station(s) in case of filter events. Traps can be off, sent once (when filter becomes true) or sent repeatedly (as long as filter is true).	Enumerationr/w Enumerated Values: 1 no 2 once 3 repeat	.1.3.6.1.4.1.1909.10.7.1.1.5
filterLEDmandatory When set to yes(2) a filter event will be signalled by the warning LED on front of RMS	Enumerationr/w Enumerated Values: 1 no 2 yes	.1.3.6.1.4.1.1909.10.7.1.1.6
filterBuzzermandatory When set to yes(2) a filter event will be signalled by the build-in buzzer	Enumerationr/w Enumerated Values: 1 no 2 yes	.1.3.6.1.4.1.1909.10.7.1.1.7
filterMessagePrioritymandatory If set to priority-warning(2) or priority-critical(3), a filter event will be logged in the message log an on all defined log server(s) with the corresponding priority. This priority has only informational character. …	Enumerationr/w Enumerated Values: 1 no-message 2 priority-warning 3 priority-critical	.1.3.6.1.4.1.1909.10.7.1.1.8
filterConfirmationmandatory If set to enabled(1), it is possible to confirme a true filter. This can be done on front panel of RMS, via telnet or via SNMP (see also variable filterConfirm).	Enumerationr/w Enumerated Values: 1 disabled 2 enabled	.1.3.6.1.4.1.1909.10.7.1.1.9
filterReactivationTimemandatory Time after which a confirmed filter will be reactivated automatically	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1909.10.7.1.1.10
filterConfirmmandatory A true filter can be confimed by writing confirmed(2) in here (provided filter confirmation is enabled - see variable filterConfirmation). By doing this the effect of this filter will be suspended until the time speci…	Enumerationr/w Enumerated Values: 1 not-confirmed 2 confirmed	.1.3.6.1.4.1.1909.10.7.1.1.11

Table containing all information about the filter inputs 
Digital 1-8 of each filter

filterDigitalInEntry row .1.3.6.1.4.1.1909.10.7.2.1

Each entry contains the description of one digital input

Indexes

filterDigitalInIndex filterDigitalInPort

Column	Syntax	OID
filterDigitalInIndexmandatory Index of the filter	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1909.10.7.2.1.1
filterDigitalInPortmandatory Index of the digital input	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1909.10.7.2.1.2
filterDigitalInEffectmandatory Determines the way the digital input effects the filter. Can be switched off(1), inverted(3) or passed thru(2).	Enumerationr/w Enumerated Values: 1 off 2 thru 3 invert	.1.3.6.1.4.1.1909.10.7.2.1.3

Table containing all information about the filter inputs 
Alert In 1-4 of each filter

filterAlertInEntry row .1.3.6.1.4.1.1909.10.7.3.1

Each entry contains information of one alert input

Indexes

filterAlertInIndex filterAlertInPort

Column	Syntax	OID
filterAlertInIndexmandatory Index of the filter	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1909.10.7.3.1.1
filterAlertInPortmandatory Index of the alert input	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1909.10.7.3.1.2
filterAlertInEffectmandatory Determines the way the alert input effects the filter. Can be switched off(1), inverted(3) or passed thru(2).	Enumerationr/w Enumerated Values: 1 off 2 thru 3 invert	.1.3.6.1.4.1.1909.10.7.3.1.3

Table containing all information about the filter inputs 
UPS In 1-2 of each filter

filterUPSInEntry row .1.3.6.1.4.1.1909.10.7.4.1

Each entry contains the description of one ups input

Indexes

filterUPSInIndex filterUPSInPort

Column	Syntax	OID
filterUPSInIndexmandatory Index of the filter	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1909.10.7.4.1.1
filterUPSInPortmandatory Index of the UPS input	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1909.10.7.4.1.2
filterUPSInEffectmandatory Determines the way the UPS input effects the filter. Can be switched off(1), inverted(3) or passed thru(2).	Enumerationr/w Enumerated Values: 1 off 2 thru 3 invert	.1.3.6.1.4.1.1909.10.7.4.1.3

Table containing information about temperature inputs of
each filter, i.e. thresholds and compare operations

filterTempEntry row .1.3.6.1.4.1.1909.10.7.5.1

Each entry contains the description of one filter temp input

Indexes

filterTempIndex filterTempSensor

Column	Syntax	OID
filterTempIndexmandatory Index of the filter	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1909.10.7.5.1.1
filterTempSensormandatory Index of the temp input	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1909.10.7.5.1.2
filterTempEffectmandatory Determines the way the result of temp input comparison effects on the filter. Can be switched off(1), inverted (3) or passed thru(3).	Enumerationr/w Enumerated Values: 1 off 2 thru 3 invert	.1.3.6.1.4.1.1909.10.7.5.1.3
filterTempAThresmandatory Threshold of temp input part A	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1909.10.7.5.1.4
filterTempAModemandatory Determines the operating mode of comparison operation A. Can be set to greater(2) ' >', less(3) '<' or turned off(1), if not needed	Enumerationr/w Enumerated Values: 1 off 2 greater 3 less	.1.3.6.1.4.1.1909.10.7.5.1.5
filterTempBThresmandatory Threshold of temp input part B	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1909.10.7.5.1.6
filterTempBModemandatory Determines the operating mode of comparison operation B. Can be set to greater(2) ' >', less(3) '<' or turned off(1), if not needed	Enumerationr/w Enumerated Values: 1 off 2 greater 3 less	.1.3.6.1.4.1.1909.10.7.5.1.7

Table containing information about humidity inputs of
each filter, i.e. thresholds and compare operations

filterHumidityEntry row .1.3.6.1.4.1.1909.10.7.6.1

Each entry contains the description of one filter

Indexes

filterHumidityIndex filterHumiditySensor

Column	Syntax	OID
filterHumidityIndexmandatory Index of the filter	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1909.10.7.6.1.1
filterHumiditySensormandatory Index of the humidity input	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1909.10.7.6.1.2
filterHumidityEffectmandatory Determines the way the result of humidity input comparison effects the filter. Can be switched off(1), inverted(3) or passed thru(2), if not needed.	Enumerationr/w Enumerated Values: 1 off 2 thru 3 invert	.1.3.6.1.4.1.1909.10.7.6.1.3
filterHumidityAThresmandatory Threshold of humidity input part A	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1909.10.7.6.1.4
filterHumidityAModemandatory Determines the operating mode of comparison operation A. Can be set to greater(2) ' >', less(3) '<' or turned off(1), if not needed	Enumerationr/w Enumerated Values: 1 off 2 greater 3 less	.1.3.6.1.4.1.1909.10.7.6.1.5
filterHumidityBThresmandatory Threshold of humidity input part B	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1909.10.7.6.1.6
filterHumidityBModemandatory Determines the operating mode of comparison operation B. Can be set to greater(2) ' >', less(3) '<' or turned off(1), if not needed	Enumerationr/w Enumerated Values: 1 off 2 greater 3 less	.1.3.6.1.4.1.1909.10.7.6.1.7

Table containing information about mains inputs of
each filter, i.e. thresholds and compare operations

filterMainsEntry row .1.3.6.1.4.1.1909.10.7.7.1

Each entry contains the description of one filter

Indexes

filterMainsIndex filterMainsSensor

Column	Syntax	OID
filterMainsIndexmandatory Index of the filter	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1909.10.7.7.1.1
filterMainsSensormandatory Index of the mains sensor	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1909.10.7.7.1.2
filterMainsEffectmandatory Determines the way the result of mains input comparison effects on the filter. Can be switched off(1), inverted(3) or passed thru (2).	Enumerationr/w Enumerated Values: 1 off 2 thru 3 invert	.1.3.6.1.4.1.1909.10.7.7.1.3
filterMainsAThresmandatory Threshold of mains input part B	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1909.10.7.7.1.4
filterMainsAModemandatory Determines the operating mode of comparison operation A. Can be set to greater(2) ' >', less(3) '<' or turned off(1), if not needed	Enumerationr/w Enumerated Values: 1 off 2 greater 3 less	.1.3.6.1.4.1.1909.10.7.7.1.5
filterMainsBThresmandatory Threshold of mains input part B	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1909.10.7.7.1.6
filterMainsBModemandatory Determines the operating mode of comparison operation B. Can be set to greater(2) ' >', less(3) '<' or turned off(1), if not needed	Enumerationr/w Enumerated Values: 1 off 2 greater 3 less	.1.3.6.1.4.1.1909.10.7.7.1.7

Table containing information about feedback inputs

filterFeedbackEntry row .1.3.6.1.4.1.1909.10.7.8.1

Each entry contains the description of one filter

Indexes

filterFeedbackIndex filterFeedbackInput

Column	Syntax	OID
filterFeedbackIndexmandatory Index of the filter	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1909.10.7.8.1.1
filterFeedbackInputmandatory Index of the feedback input	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1909.10.7.8.1.2
filterFeedbackInFiltermandatory Number of the filter which is connected to this feedback input	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1909.10.7.8.1.3
filterFeedbackDelaymandatory Delay time to wait until signal is forwarded	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1909.10.7.8.1.4
filterFeedbackPassConditionmandatory Determines the way an incoming signal is forwarded to the filter structure. If set to thru(1), all incoming signals are straight forwarded. If set to conditional(2), an incoming signal only will be forwarded, if aft…	Enumerationr/w Enumerated Values: 1 thru 2 conditional	.1.3.6.1.4.1.1909.10.7.8.1.5
filterFeedbackHoldmandatory Determines the time the passed signal will be held up, after the falling edge of the original trigger signal. See timing diagram in manual for further details.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1909.10.7.8.1.6
filterFeedbackEffectmandatory Determines the way the result of feedback input effects the filter. Can be switched off(1), inverted(3) or passed thru (2).	Enumerationr/w Enumerated Values: 1 off 2 on 3 invert	.1.3.6.1.4.1.1909.10.7.8.1.7

The message table contains the logged filter events

messageEntry row .1.3.6.1.4.1.1909.10.8.1.1

Each entry contains information of one message

Indexes

messageIndex

Column	Syntax	OID
messageIndexmandatory Index of message line	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1909.10.8.1.1.1
messageFiltermandatory Number of filter which caused the message	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1909.10.8.1.1.2
messageFilterDescrmandatory Name of the filter which caused the message		.1.3.6.1.4.1.1909.10.8.1.1.3
messageTimemandatory Timestamp of event	RFC1155-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1909.10.8.1.1.4
messagePrioritymandatory Priority of the message. If set to no-priority(1) no message will be logged. The Priority has only informational character and doesn't affect the way it is handled	Enumeration Enumerated Values: 1 no-priority 2 warning 3 critical	.1.3.6.1.4.1.1909.10.8.1.1.5
messageAcknoledgedmandatory Displays, if event was acknoledged already. Has only informational character for operator	Enumerationr/w Enumerated Values: 1 not-acknowledged 2 acknowledged	.1.3.6.1.4.1.1909.10.8.1.1.6

Some infos about all registered users, e.g.
name, right and chipcard key (if reader installed)

userEntry row .1.3.6.1.4.1.1909.10.9.1.1

Each entry contains information about one user

Indexes

userIndex

Column	Syntax	OID
userIndexmandatory Index of user. Is dynamically filled from 1..n	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1909.10.9.1.1.1
userNamemandatory name of one user		.1.3.6.1.4.1.1909.10.9.1.1.2
userRightmandatory Access right of one user	Enumeration Enumerated Values: 1 readonly 2 readwrite	.1.3.6.1.4.1.1909.10.9.1.1.3
userChipcardKeymandatory Displays the chipcard key of this user - only available, if optional chipcard reader installed.		.1.3.6.1.4.1.1909.10.9.1.1.4
userChipcardAccessmandatory Holds the status of the last access try via chipcard reader. In case of failure a rmsChipcardTrap will be sent.	Enumeration Enumerated Values: 1 denied 2 granted	.1.3.6.1.4.1.1909.10.9.1.1.5