INFINET-EXTCES-UNIT0-DS1-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

cesOverWlanUnit0Dsx1ConfigTable

table

.1.3.6.1.4.1.3942.2.1.1.2.6 · 1 row entry · 23 columns

Open in standard view

The DS1 Configuration table.

cesOverWlanUnit0Dsx1ConfigEntry entry .1.3.6.1.4.1.3942.2.1.1.2.6.1

An entry in the DS1 Configuration table.

Indexes

No indexes recorded

Column	Syntax	OID
cesOverWlanUnit0Dsx1LineIndex This object should be made equal to ifIndex. The next paragraph describes its previous usage. Making the object equal to ifIndex allows proper use of the ifStackTable and ds0/ds0bundle MIBs. Previously, …	IF-MIBInterfaceIndex Textual Convention: IF-MIBInterfaceIndex `Integer32` Type Constraints: `range: 1..2147483647`	`.1.3.6.1.4.1.3942.2.1.1.2.6.1.1`
cesOverWlanUnit0Dsx1IfIndex deprecated This value for this object is equal to the value of ifIndex from the Interfaces table (RFC 2863).	IF-MIBInterfaceIndex Textual Convention: IF-MIBInterfaceIndex `Integer32` Type Constraints: `range: 1..2147483647`	`.1.3.6.1.4.1.3942.2.1.1.2.6.1.2`
cesOverWlanUnit0Dsx1TimeElapsed The number of seconds that have elapsed since the beginning of the near-end current error- measurement period. If, for some reason, such as an adjustment in the system's time-of-day clock, the current interval exceeds …	Integer32	`.1.3.6.1.4.1.3942.2.1.1.2.6.1.3`
cesOverWlanUnit0Dsx1ValidIntervals The number of previous near-end intervals for which data was collected. The value will be 96 unless the interface was brought online within the last 24 hours, in which case the value will be the number of complete 15-m…	Integer32	`.1.3.6.1.4.1.3942.2.1.1.2.6.1.4`
cesOverWlanUnit0Dsx1LineType This variable indicates the variety of DS1 Line implementing this circuit. The type of circuit affects the number of bits per second that the circuit can reasonably carry, as well as the interpretation of the usage and…	Enumeration	`.1.3.6.1.4.1.3942.2.1.1.2.6.1.5`
cesOverWlanUnit0Dsx1LineCoding This variable describes the variety of Zero Code Suppression used on this interface, which in turn affects a number of its characteristics. dsx1JBZS refers the Jammed Bit Zero Suppression, in which the AT…	Enumeration	`.1.3.6.1.4.1.3942.2.1.1.2.6.1.6`
cesOverWlanUnit0Dsx1SendCode This variable indicates what type of code is being sent across the DS1 interface by the device. The values mean the following: dsx1SendNoCode sending looped or normal data dsx1SendLineCode …	Enumeration	`.1.3.6.1.4.1.3942.2.1.1.2.6.1.7`
cesOverWlanUnit0Dsx1CircuitIdentifier This variable contains the transmission vendor's circuit identifier, for the purpose of facilitating troubleshooting.	OctetString	`.1.3.6.1.4.1.3942.2.1.1.2.6.1.8`
cesOverWlanUnit0Dsx1LoopbackConfig This variable represents the desired loopback configuration of the DS1 interface. Agents supporting read/write access should return inconsistentValue in response to a requested loopback state that the interface does no…	Enumeration	`.1.3.6.1.4.1.3942.2.1.1.2.6.1.9`
cesOverWlanUnit0Dsx1LineStatus This variable indicates the line status of the interface. It contains loopback, failure, received alarm and transmitted alarms information. The cesOverWlanUnit0Dsx1LineStatus is a bitmap represented as a…	Integer32	`.1.3.6.1.4.1.3942.2.1.1.2.6.1.10`
cesOverWlanUnit0Dsx1SignalMode 'none' indicates that no bits are reserved for signaling on this channel. 'robbedBit' indicates that DS1 Robbed Bit Signaling is in use. 'bitOriented' indicates that E1 Channel Associated S…	Enumeration	`.1.3.6.1.4.1.3942.2.1.1.2.6.1.11`
cesOverWlanUnit0Dsx1TransmitClockSource The source of transmit clock. 'loopTiming' indicates that the recovered receive clock is used as the transmit clock. 'localTiming' indicates that a local clock source is used or when an ext…	Enumeration	`.1.3.6.1.4.1.3942.2.1.1.2.6.1.12`
cesOverWlanUnit0Dsx1Fdl This bitmap describes the use of the facilities data link and is the sum of the capabilities. Set any bits that are appropriate: other(1), dsx1AnsiT1403(2), dsx1Att54016(4), dsx1FdlNone(8) …	Integer32	`.1.3.6.1.4.1.3942.2.1.1.2.6.1.13`
cesOverWlanUnit0Dsx1InvalidIntervals The number of intervals in the range from 0 to cesOverWlanUnit0Dsx1ValidIntervals for which no data is available. This object will typically be zero except in cases where the data for some intervals is not available (e.…	Integer32	`.1.3.6.1.4.1.3942.2.1.1.2.6.1.14`
cesOverWlanUnit0Dsx1LineLength The length of the DS1 line in meters. This object provides information for line build-out circuitry. This object is only useful if the interface has configurable line build-out circuitry.	metersInteger32	`.1.3.6.1.4.1.3942.2.1.1.2.6.1.15`
cesOverWlanUnit0Dsx1LineStatusLastChange The value of MIB II's sysUpTime object at the time this DS1 entered its current line status state. If the current state was entered prior to the last re-initialization of the proxy-agent, then this object contains a ze…	SNMPv2-TCTimeStamp Textual Convention: SNMPv2-TCTimeStamp `Unsigned32`	`.1.3.6.1.4.1.3942.2.1.1.2.6.1.16`
cesOverWlanUnit0Dsx1LineStatusChangeTrapEnable Indicates whether cesOverWlanUnit0Dsx1LineStatusChange traps should be generated for this interface.	Enumeration	`.1.3.6.1.4.1.3942.2.1.1.2.6.1.17`
cesOverWlanUnit0Dsx1LoopbackStatus This variable represents the current state of the loopback on the DS1 interface. It contains information about loopbacks established by a manager and remotely from the far end. The cesOverWlanUnit0Dsx1Lo…	Integer32	`.1.3.6.1.4.1.3942.2.1.1.2.6.1.18`
cesOverWlanUnit0Dsx1Ds1ChannelNumber This variable represents the channel number of the DS1/E1 on its parent DS2/E2 or DS3/E3. A value of 0 indicates that this DS1/E1 does not have a parent DS3/E3.	Integer32	`.1.3.6.1.4.1.3942.2.1.1.2.6.1.19`
cesOverWlanUnit0Dsx1Channelization Indicates whether this DS1/E1 or DS2 is channelized or unchannelized. The value of enabledDs0(2) indicates that this is a DS1 channelized into DS0s. Setting this value will cause the creation, and resett…	Enumeration	`.1.3.6.1.4.1.3942.2.1.1.2.6.1.20`
cesOverWlanUnit0Dsx1LineMode This setting puts the T1 framer into either long-haul (CSU) mode or short-haul (DSU) mode.	Enumeration	`.1.3.6.1.4.1.3942.2.1.1.2.6.1.21`
cesOverWlanUnit0Dsx1LineBuildOut Attenuation setting for T1 framer in long haul (CSU) mode. The optional values are -7.5dB, -15dB, -22.5dB, and 0dB.	Enumeration	`.1.3.6.1.4.1.3942.2.1.1.2.6.1.22`
cesOverWlanUnit0Dsx1LineImpedance Nominal line impedance. For T1 and J1 lines, the value is typically balanced100ohms(3). For E1 lines, the value is typically unbalanced75ohms(2) and balanced120ohms(4). When this object does not apply, or when the ap…	Enumeration	`.1.3.6.1.4.1.3942.2.1.1.2.6.1.23`

cesOverWlanUnit0Dsx1CurrentTable

table

.1.3.6.1.4.1.3942.2.1.1.2.7 · 1 row entry · 11 columns

Open in standard view

The DS1 Current table contains various statistics
being collected for the current 15-minute
interval.

cesOverWlanUnit0Dsx1CurrentEntry entry .1.3.6.1.4.1.3942.2.1.1.2.7.1

An entry in the DS1 Current table.

Indexes

No indexes recorded

Column	Syntax	OID
cesOverWlanUnit0Dsx1CurrentIndex The index value that uniquely identifies the DS1 interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value as a cesO…	IF-MIBInterfaceIndex Textual Convention: IF-MIBInterfaceIndex `Integer32` Type Constraints: `range: 1..2147483647`	`.1.3.6.1.4.1.3942.2.1.1.2.7.1.1`
cesOverWlanUnit0Dsx1CurrentESs The number of Errored Seconds.	PerfHist-TC-MIBPerfCurrentCount Textual Convention: PerfHist-TC-MIBPerfCurrentCount `Unsigned32`	`.1.3.6.1.4.1.3942.2.1.1.2.7.1.2`
cesOverWlanUnit0Dsx1CurrentSESs The number of Severely Errored Seconds.	PerfHist-TC-MIBPerfCurrentCount Textual Convention: PerfHist-TC-MIBPerfCurrentCount `Unsigned32`	`.1.3.6.1.4.1.3942.2.1.1.2.7.1.3`
cesOverWlanUnit0Dsx1CurrentSEFSs The number of Severely Errored Framing Seconds.	PerfHist-TC-MIBPerfCurrentCount Textual Convention: PerfHist-TC-MIBPerfCurrentCount `Unsigned32`	`.1.3.6.1.4.1.3942.2.1.1.2.7.1.4`
cesOverWlanUnit0Dsx1CurrentUASs The number of Unavailable Seconds.	PerfHist-TC-MIBPerfCurrentCount Textual Convention: PerfHist-TC-MIBPerfCurrentCount `Unsigned32`	`.1.3.6.1.4.1.3942.2.1.1.2.7.1.5`
cesOverWlanUnit0Dsx1CurrentCSSs The number of Controlled Slip Seconds.	PerfHist-TC-MIBPerfCurrentCount Textual Convention: PerfHist-TC-MIBPerfCurrentCount `Unsigned32`	`.1.3.6.1.4.1.3942.2.1.1.2.7.1.6`
cesOverWlanUnit0Dsx1CurrentPCVs The number of Path Coding Violations.	PerfHist-TC-MIBPerfCurrentCount Textual Convention: PerfHist-TC-MIBPerfCurrentCount `Unsigned32`	`.1.3.6.1.4.1.3942.2.1.1.2.7.1.7`
cesOverWlanUnit0Dsx1CurrentLESs The number of Line Errored Seconds.	PerfHist-TC-MIBPerfCurrentCount Textual Convention: PerfHist-TC-MIBPerfCurrentCount `Unsigned32`	`.1.3.6.1.4.1.3942.2.1.1.2.7.1.8`
cesOverWlanUnit0Dsx1CurrentBESs The number of Bursty Errored Seconds.	PerfHist-TC-MIBPerfCurrentCount Textual Convention: PerfHist-TC-MIBPerfCurrentCount `Unsigned32`	`.1.3.6.1.4.1.3942.2.1.1.2.7.1.9`
cesOverWlanUnit0Dsx1CurrentDMs deprecated The number of Degraded Minutes.	PerfHist-TC-MIBPerfCurrentCount Textual Convention: PerfHist-TC-MIBPerfCurrentCount `Unsigned32`	`.1.3.6.1.4.1.3942.2.1.1.2.7.1.10`
cesOverWlanUnit0Dsx1CurrentLCVs The number of Line Coding Violations (LCVs).	PerfHist-TC-MIBPerfCurrentCount Textual Convention: PerfHist-TC-MIBPerfCurrentCount `Unsigned32`	`.1.3.6.1.4.1.3942.2.1.1.2.7.1.11`

cesOverWlanUnit0Dsx1IntervalTable

table

.1.3.6.1.4.1.3942.2.1.1.2.8 · 1 row entry · 13 columns

Open in standard view

The DS1 Interval table contains various
statistics collected by each DS1 interface over
the previous 24 hours of operation.  The past 24
hours are broken into 96 completed 15-minute
intervals.  Each row in this table represents one
such interval (identified by cesOverWlanUnit0Dsx1IntervalNumber)
for one specific instance (identified by
cesOverWlanUnit0Dsx1IntervalIndex).

cesOverWlanUnit0Dsx1IntervalEntry entry .1.3.6.1.4.1.3942.2.1.1.2.8.1

An entry in the DS1 Interval table.

Indexes

No indexes recorded

Column Syntax OID

cesOverWlanUnit0Dsx1IntervalIndex

The index value that uniquely identifies the DS1
interface to which this entry is applicable. The
interface identified by a particular value of this
index is the same interface as identified by the
same value as a cesO…

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.3942.2.1.1.2.8.1.1

cesOverWlanUnit0Dsx1IntervalNumber

A number between 1 and 96, where 1 is the most
recently completed 15-minute interval and 96 is
the 15-minute interval completed 23 hours and 45
minutes prior to interval 1.

Integer32

.1.3.6.1.4.1.3942.2.1.1.2.8.1.2

cesOverWlanUnit0Dsx1IntervalESs

The number of Errored Seconds.

PerfHist-TC-MIBPerfIntervalCount