INFINERA-TP-SDHCLIENTCTP-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
1
Rows
1
Columns
63

sdhClientCtpTable

table
.1.3.6.1.4.1.21296.2.2.2.2.15.1 · 1 row entry · 63 columns
Open in standard view
Uses the infinera variant from /opt/observium/mibs/infinera.
Command help
Walk sdhClientCtpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'INFINERA-TP-SDHCLIENTCTP-MIB' -M '/opt/observium/mibs/infinera:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'INFINERA-TP-SDHCLIENTCTP-MIB::sdhClientCtpTable' 
A list of SdhClientCtp entries. Each entry is uniquely identified by the value of ifIndex.
sdhClientCtpEntry row .1.3.6.1.4.1.21296.2.2.2.2.15.1.1
A SdhClientCtp entry containing information pertaining to Infinera SdhClientCtp interfaces.
Entries will exist in this table for interfaces of type sdhclientCtp.
Indexes
Column Syntax OID
sdhClientCtpTribPrbsGenMode
Flag which enables the generation of PRBS data on the transmit side.
INFINERA-TC-MIBInfnEnableDisabler/w
Type Values:
1disabled
2enabled
3unknown
 .1.3.6.1.4.1.21296.2.2.2.2.15.1.1.1
sdhClientCtpTribPrbsMonMode
Flag which enables the monitoring of bit errors.
INFINERA-TC-MIBInfnEnableDisabler/w
Type Values:
1disabled
2enabled
3unknown
 .1.3.6.1.4.1.21296.2.2.2.2.15.1.1.2
sdhClientCtpSupportingCircuitIdList
An unordered list of the circuitIDs supporting this Managed Object.
This string contains the string representation of each supporting
circuitID, separated by a ',' (comma) if there is more than one
supporting circuitID.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.21296.2.2.2.2.15.1.1.3
sdhClientCtpLoopback
Flag to enable the loopback.
INFINERA-TC-MIBInfnLoopbackTyper/w
Type Values:
1none
2terminal
3facility
Description:
This textual convention represents the loop back types.
 .1.3.6.1.4.1.21296.2.2.2.2.15.1.1.4
sdhClientCtpPmHistStatsEnable
Flag to enable or disable PM collection.
INFINERA-TC-MIBInfnPmHistStatsControlr/w
Type Values:
1enabled
2disabled
3unknown
 .1.3.6.1.4.1.21296.2.2.2.2.15.1.1.5
sdhClientCtpConfiguredServiceType
The configured payload type.
INFINERA-TC-MIBInfnServiceType
Type Values:
1notSet
2bw10g
3bw2d5g
4oc48
5oc192
6bwtdm155
7bwtdm622
8stm16
9stm64
10ficon
11escon
12bw10Gbe
13oc3
14oc12
15stm1
16stm4
17bw10Gcc
18bw1Gbe
19bw2d5Gcc
20bw2d38Gcc
21bw1G
22bw2x1GbeChan
23bw40g
24stm256
25stm256L1
26stm256L2
27stm256L3
28stm256L4
29oc768
30oc768L1
31oc768L2
32oc768L3
33oc768L4
34bw4xoc192
35bw4xstm64
36bw10Gdtf
37bw1Gfc
38bw2Gfc
39bw4Gfc
40bw4Gcc
41bw8Gfc
42bw10Gfc
43otu1
44otu2
45otu1e
46otu2e
47odu1
48odu1e
49odu2
50odu2e
51dv6000
52escon200Mcc
53ib2d5Gcc
54ib10Gcc
55hd1d485Gcc
56hd1d483Gcc
57sd270Mcc
58dvb270Mcc
59hdSdi3GPal
60hdSdi3GNtsc
61bw4Gig
62bw8Gig
63bw1d25g
64otu2f
65odu2f
66bwVideo270
67bw4GFc1
68bw4GFc2
69bw1d25Gcc
70bw40Gbe
71bw100Gbe
72bw10d3Gcc
73bw100g
74bw40gbellane
75bw100gbellane
76bwOdui0
77bwOdui1
78bwOdui2
79bwOdui3
80bwOdui4
81bwOdui3plus
82bwOtui0
83bwOtui1
84bwOtui2
85bwOtui3
86bwOtui4
87bwOtui3plus
88bwOtu4
89bwOtu3
90bwOdu4
91bwOdu3
92bwOtu3e1
93bwOtu3e2
94bwOdu3e1
95bwOdu3e2
96bwOdu0
97bwOduFlex
98bwOduFlexI
99bwGfp
100bw11G1Cc
101bwOtu2v
102bwCcFlex
103bw1G0625Cc
104bw2G125Cc
105bwOc768demux
106bwStm256demux
107bwTransparent
108bw40gedemux
109bw100gedemux
110bwOdu1dtn
111bWOdu2dtn
112bWOdu1edtn
113bWOdu2edtn
114bW10X10gdemux
115bwOdu2i4v
116bwOdu2i10v
117bw10gbe
118bw100gbe
119bwOtuAdapti
120bwOduAdapti
Description:
The infinera supported payloads.
 .1.3.6.1.4.1.21296.2.2.2.2.15.1.1.6
sdhClientCtpRxJ0
The trace that we are receiving currently. (COs update the MOs only when
there is a change in the filtered received trace). CRC at the first
byte is removed. Whatever is remaining is converted to
ascii representation o…
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.21296.2.2.2.2.15.1.1.7
sdhClientCtpExpectedRxJ0
The J0 trace that is to be expected from the receive side from the
customer equipment. If not zero-length and different from
J0ReceivedTrace, a J0 mismatch alarm will be raised. Message is
always ASCII characters.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.21296.2.2.2.2.15.1.1.8
sdhClientCtpTransmittedJ0
Transmitted J0 message.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.21296.2.2.2.2.15.1.1.9
sdhClientCtpRxJ0MessageLength
The length of J0 byte.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.21296.2.2.2.2.15.1.1.10
sdhClientCtpRxJ0MismatchReporting
Flag that enables or disables the reporting of J0 trace
mismatch condition.
INFINERA-TC-MIBInfnEnableDisabler/w
Type Values:
1disabled
2enabled
3unknown
 .1.3.6.1.4.1.21296.2.2.2.2.15.1.1.11
sdhClientCtpRxJ0TraceMode
The trace mode.
INFINERA-TC-MIBInfnJ0TraceModer/w
Type Values:
1transparent
2overwrite
Description:
J0 Trace Mode.
 .1.3.6.1.4.1.21296.2.2.2.2.15.1.1.12
sdhClientCtpRxJ0MessageCompliance
J0 Message trace compliance.
INFINERA-TC-MIBInfnJ0MessageCompliancer/w
Type Values:
1gr253r3
2ansiItu
Description:
J0 Message Compliance.
 .1.3.6.1.4.1.21296.2.2.2.2.15.1.1.13
sdhClientCtpRxBe15MinutesTce
Count of the number of errors within a block in the incoming clients
SDH signal in 15 minutes.
SNMPv2-SMICounter64r/w
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.21296.2.2.2.2.15.1.1.14
sdhClientCtpRxEs15MinutesTce
Count of BIP errors detected at the Section layer in 15 minute
(in the incoming clients SONET signal). Up to eight Section BIP errors can
be detected per STS-N frame, with each error incrementing the Sonet-Rx-CV-S
curr…
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.21296.2.2.2.2.15.1.1.15
sdhClientCtpRxSes15MinutesTce
Count of the seconds during which30% or more RS block errors
were detected or an LOS or SEF defect was present in 15 minutes.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.21296.2.2.2.2.15.1.1.16
sdhClientCtpRxOfs15MinutesTce
Regenerator Section - Out of Frame Seconds. Count of the
number of seconds that Out of Frame is received in 15 minutes.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.21296.2.2.2.2.15.1.1.17
sdhClientCtpRxLoss15MinutesTce
Regenerator Section - Loss of Signal Seconds. Count of the number
of seconds that SDH client LOS is received in 15 minutes.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.21296.2.2.2.2.15.1.1.18
sdhClientCtpRxBeDayTce
Count of the number of errors within a block in the incoming clients
SDH signal in 24 hours.
SNMPv2-SMICounter64r/w
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.21296.2.2.2.2.15.1.1.19
sdhClientCtpRxEsDayTce
Count of BIP errors detected at the Section layer in 24 hours
(in the incoming clients SONET signal). Up to eight Section BIP errors can
be detected per STS-N frame, with each error incrementing the Sonet-Rx-CV-S
curre…
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.21296.2.2.2.2.15.1.1.20
sdhClientCtpRxSesDayTce
Count of the seconds during which30% or more RS block errors
were detected or an LOS or SEF defect was present in 24 hours.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.21296.2.2.2.2.15.1.1.21
sdhClientCtpRxOfsDayTce
Regenerator Section - Out of Frame Seconds. Count of the number
of seconds that Out of Frame is received in 24 hours.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.21296.2.2.2.2.15.1.1.22
sdhClientCtpRxLossDayTce
Regenerator Section - Loss of Signal Seconds. Count of the
number of seconds that SDH client LOS is received in 24 hours.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.21296.2.2.2.2.15.1.1.23
sdhClientCtpTxBe15MinutesTce
Count of the number of errors within a block in the SDH signal
received from the network and to be transmitted to the receiving client
in 15 minutes.
SNMPv2-SMICounter64r/w
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.21296.2.2.2.2.15.1.1.24
sdhClientCtpTxEs15MinutesTce
Count of the number of seconds during which (at any point
during the second) at least one Tx RS block error was detected or an LOS
or SEF defect was present in 15 minutes.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.21296.2.2.2.2.15.1.1.25
sdhClientCtpTxSes15MinutesTce
Count of the seconds during which K (=10000) or more
SONET TX BIP errors were detected or an LOS or SEF defect was present
in 15 minutes.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.21296.2.2.2.2.15.1.1.26
sdhClientCtpTxOfs15MinutesTce
Regenerator Section - Out of Frame Seconds. Count of the number
of seconds that Out of Frame is detected in 15 minutes.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.21296.2.2.2.2.15.1.1.27
sdhClientCtpTxBeDayTce
Count of the number of errors within a block in the SDH signal
received from the network and to be transmitted to the receiving
client in 24 hours.
SNMPv2-SMICounter64r/w
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.21296.2.2.2.2.15.1.1.28
sdhClientCtpTxEsDayTce
Count of the number of seconds during which (at any point
during the second) at least one Tx RS block error was detected or an LOS
or SEF defect was present in 24 hours.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.21296.2.2.2.2.15.1.1.29
sdhClientCtpTxSesDayTce
Count of the seconds during which K (=10000) or more
SONET TX BIP errors were detected or an LOS or SEF defect was present
in 24 hours.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.21296.2.2.2.2.15.1.1.30
sdhClientCtpTxOfsDayTce
Regenerator Section - Out of Frame Seconds. Count of the
number of seconds that Out of Frame is detected in 24 hours.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.21296.2.2.2.2.15.1.1.31
sdhClientCtpRxBe15MinutesTceReporting
Flag that enables the reporting of RxBe15MinutesTce threshold crossing.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.21296.2.2.2.2.15.1.1.32
sdhClientCtpRxEs15MinutesTceReporting
Flag that enables the reporting of RxEs15Minutes threshold crossing.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.21296.2.2.2.2.15.1.1.33
sdhClientCtpRxSes15MinutesTceReporting
Flag that enables the reporting of RxSes15MinutesTce threshold crossing.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.21296.2.2.2.2.15.1.1.34
sdhClientCtpRxBeDayTceReporting
Flag that enables the reporting of RxBeDayTce threshold crossing.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.21296.2.2.2.2.15.1.1.35
sdhClientCtpRxEsDayTceReporting
Flag that enables the reporting of RxEsDayTce threshold crossing.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.21296.2.2.2.2.15.1.1.36
sdhClientCtpRxSesDayTceReporting
Flag that enables the reporting of RxSesDayTce threshold crossing.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.21296.2.2.2.2.15.1.1.37
sdhClientCtpRxOfs15MinutesTceReporting
Flag that enables the reporting of RxOfs15MinutesTce threshold crossing.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.21296.2.2.2.2.15.1.1.38
sdhClientCtpRxOfsDayReporting
Flag that enables the reporting of RxOfsDayTce threshold crossing.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.21296.2.2.2.2.15.1.1.39
sdhClientCtpRxLoss15MinutesTceReporting
Flag that enables the reporting of RxLoss15MinutesTce threshold crossing.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.21296.2.2.2.2.15.1.1.40
sdhClientCtpRxLossDayReporting
Flag that enables the reporting of RxLossDayTce threshold crossing.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.21296.2.2.2.2.15.1.1.41
sdhClientCtpTxBe15MinutesTceReporting
Flag that enables the reporting of TxBe15MinutesTce crossing.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.21296.2.2.2.2.15.1.1.42
sdhClientCtpTxEs15MinutesTceReporting
Flag that enables the reporting of TxEs15MinutesTce crossing.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.21296.2.2.2.2.15.1.1.43
sdhClientCtpTxSes15MinutesTceReporting
Flag that enables the reporting of TxSes15MinutesTce crossing.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.21296.2.2.2.2.15.1.1.44
sdhClientCtpTxBeDayTceReporting
Flag that enables the reporting of TxBeDayTce crossing.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.21296.2.2.2.2.15.1.1.45
sdhClientCtpTxEsDayTceReporting
Flag that enables the reporting of TxEsDayTce crossing.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.21296.2.2.2.2.15.1.1.46
sdhClientCtpTxSesDayTceReporting
Flag that enables the reporting of TxSefsDayTce crossing.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.21296.2.2.2.2.15.1.1.47
sdhClientCtpTxOfs15MinutesTceReporting
Flag that enables the reporting of TxOfs15MinutesTce crossing.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.21296.2.2.2.2.15.1.1.48
sdhClientCtpTxOfsDayReporting
Flag that enables the reporting of TxOfsDayTce crossing.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.21296.2.2.2.2.15.1.1.49
sdhClientCtpUasMonitoring
Flag which enables/disables SDH Un-Available seconds PM Monitoring
INFINERA-TC-MIBInfnEnableDisabler/w
Type Values:
1disabled
2enabled
3unknown
 .1.3.6.1.4.1.21296.2.2.2.2.15.1.1.50
sdhClientCtpRxUas15MinutesTce
15 minutest receive count for Unavailable seconds
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.21296.2.2.2.2.15.1.1.51
sdhClientCtpRxUasDayTce
24 hour receive count for un available seconds.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.21296.2.2.2.2.15.1.1.52
sdhClientCtpTxUas15MinutesTce
15 minutes transmit count for unavailable seconds.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.21296.2.2.2.2.15.1.1.53
sdhClientCtpTxUasDayTce
24 hours transmit count for unavilable seconds.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.21296.2.2.2.2.15.1.1.54
sdhClientCtpRxUas15MinutesTceReporting
Flag that enables the reporting of SdhRxUas15MinutesTce crossing.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.21296.2.2.2.2.15.1.1.55
sdhClientCtpRxUasDayTceReporting
Flag that enables the reporting of SdhRxUasDayTce crossing.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.21296.2.2.2.2.15.1.1.56
sdhClientCtpTxUas15MinutesTceReporting
Flag that enables the reporting of sdhTxUas15MinutesTce crossing.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.21296.2.2.2.2.15.1.1.57
sdhClientCtpTxUasDayTceReporting
Flag that enables the reporting of SdhTxUasDayTce crossing.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.21296.2.2.2.2.15.1.1.58
sdhClientCtpLinePrbsGenMode
Flag which enables the generation of PRBS data on the Line side.
INFINERA-TC-MIBInfnEnableDisabler/w
Type Values:
1disabled
2enabled
3unknown
 .1.3.6.1.4.1.21296.2.2.2.2.15.1.1.59
sdhClientCtpLinePrbsMonMode
Flag which enables the monitoring of bit errors.
INFINERA-TC-MIBInfnEnableDisabler/w
Type Values:
1disabled
2enabled
3unknown
 .1.3.6.1.4.1.21296.2.2.2.2.15.1.1.60
sdhClientCtpServiceMode
The Service Mode (SM) of the client CTP (i.e., the mode/type of service in which
this SDH client CTP is being used.
INFINERA-TC-MIBInfnServiceMode
Type Values:
1none
2adaptation
3networkWrapper
4muxed
5transport
6switching
 .1.3.6.1.4.1.21296.2.2.2.2.15.1.1.61
sdhClientCtpServiceModeQualifier
The Service Mode Qualifier (SMQ) of the SDH client CTP
(i.e., the mode/type of service in which this SDH client CTP is being used.
INFINERA-TC-MIBInfnSMQ
Type Values:
1none
2smqWithoutFecErrFwd
3smqWithFecErrFwd
4smqMuxDemux
5smqOC192
6smqSTM64
7smq10GBE
8smqOC48
9smqSTM16
10smqGFP
11smqODU4i
12smqODU4
13smqODU3iPlus
14smqODU3i
15smqODU3
16smqODU2e
17smqODU2
18smqODU1e
19smqODU1
20smqODU0
21smqODU3e2
22smqODU3e1
23smqWithFecOam
24smqOc768
25smqStm256
26smqOduAdapti
 .1.3.6.1.4.1.21296.2.2.2.2.15.1.1.62
sdhClientCtpEncapClientDisableAction
 INFINERA-TC-MIBInfnClientActionr/w
Type Values:
1sendaisl
2sendlf
3noreplace
4genericais
5sendnos
 .1.3.6.1.4.1.21296.2.2.2.2.15.1.1.63