INFINERA-TP-DTPCTP-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

dtpCtpTable

table

.1.3.6.1.4.1.21296.2.2.2.2.7.1 · 1 row entry · 56 columns

Open in standard view

Uses the infinera variant from /opt/observium/mibs/infinera.

Command help

Walk dtpCtpTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'INFINERA-TP-DTPCTP-MIB' -M '/opt/observium/mibs/infinera:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'INFINERA-TP-DTPCTP-MIB::dtpCtpTable'

A list of DtpCtp entries. Each entry is uniquely identified by the value of ifIndex.

dtpCtpEntry row .1.3.6.1.4.1.21296.2.2.2.2.7.1.1

A DtpCtp entry containing information pertaining to Infinera DtpCtp interfaces. This table is a subclass
of IfCommon. Entries will exist in this table only for interfaces of type DtpCtp.

Indexes

IF-MIBifIndex

Column Syntax OID

dtpCtpCfgProtSt

The preferred state of the protection unit.

Enumeration

Enumerated Values:

1	unknown
2	wrk
3	prot
4	relb
5	pU

.1.3.6.1.4.1.21296.2.2.2.2.7.1.1.1

dtpCtpProtMod

Protection type viz STDSNCP, DTSNCP or None.

Enumeration

Enumerated Values:

1	none
2	dtDSNCP
3	stDSNCP

.1.3.6.1.4.1.21296.2.2.2.2.7.1.1.2

dtpCtpSwReason

Sw Reason

Enumeration

Enumerated Values:

1	mSwP
2	mSwW
3	wLck
4	pLck
5	auto
6	none
7	revert
8	admLck
9	unProv
10	eqFlt
11	liFlt
12	liSF
13	clRxFlt
14	clTxFlt
15	sysLof

.1.3.6.1.4.1.21296.2.2.2.2.7.1.1.3

dtpCtpSupportingTP

The corresponding AID of that particular DTPCTP.

SNMPv2-TCDisplayStringr/w

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.21296.2.2.2.2.7.1.1.4

dtpCtpExpectedPayload

Payload expected at this termination point.

INFINERA-TC-MIBInfnServiceType

Type Values:

1	notSet
2	bw10g
3	bw2d5g
4	oc48
5	oc192
6	bwtdm155
7	bwtdm622
8	stm16
9	stm64
10	ficon
11	escon
12	bw10Gbe
13	oc3
14	oc12
15	stm1
16	stm4
17	bw10Gcc
18	bw1Gbe
19	bw2d5Gcc
20	bw2d38Gcc
21	bw1G
22	bw2x1GbeChan
23	bw40g
24	stm256
25	stm256L1
26	stm256L2
27	stm256L3
28	stm256L4
29	oc768
30	oc768L1
31	oc768L2
32	oc768L3
33	oc768L4
34	bw4xoc192
35	bw4xstm64
36	bw10Gdtf
37	bw1Gfc
38	bw2Gfc
39	bw4Gfc
40	bw4Gcc
41	bw8Gfc
42	bw10Gfc
43	otu1
44	otu2
45	otu1e
46	otu2e
47	odu1
48	odu1e
49	odu2
50	odu2e
51	dv6000
52	escon200Mcc
53	ib2d5Gcc
54	ib10Gcc
55	hd1d485Gcc
56	hd1d483Gcc
57	sd270Mcc
58	dvb270Mcc
59	hdSdi3GPal
60	hdSdi3GNtsc
61	bw4Gig
62	bw8Gig
63	bw1d25g
64	otu2f
65	odu2f
66	bwVideo270
67	bw4GFc1
68	bw4GFc2
69	bw1d25Gcc
70	bw40Gbe
71	bw100Gbe
72	bw10d3Gcc
73	bw100g
74	bw40gbellane
75	bw100gbellane
76	bwOdui0
77	bwOdui1
78	bwOdui2
79	bwOdui3
80	bwOdui4
81	bwOdui3plus
82	bwOtui0
83	bwOtui1
84	bwOtui2
85	bwOtui3
86	bwOtui4
87	bwOtui3plus
88	bwOtu4
89	bwOtu3
90	bwOdu4
91	bwOdu3
92	bwOtu3e1
93	bwOtu3e2
94	bwOdu3e1
95	bwOdu3e2
96	bwOdu0
97	bwOduFlex
98	bwOduFlexI
99	bwGfp
100	bw11G1Cc
101	bwOtu2v
102	bwCcFlex
103	bw1G0625Cc
104	bw2G125Cc
105	bwOc768demux
106	bwStm256demux
107	bwTransparent
108	bw40gedemux
109	bw100gedemux
110	bwOdu1dtn
111	bWOdu2dtn
112	bWOdu1edtn
113	bWOdu2edtn
114	bW10X10gdemux
115	bwOdu2i4v
116	bwOdu2i10v
117	bw10gbe
118	bw100gbe
119	bwOtuAdapti
120	bwOduAdapti

Description:

The infinera supported payloads.

.1.3.6.1.4.1.21296.2.2.2.2.7.1.1.5

dtpCtpSupportingCircuitIdList

An unordered list of the CircuitId's associated with this groupTp object.
This string contains the string representation of each supporting
CircuitId, separated by a ';' (semicolon) if there is more than one.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.21296.2.2.2.2.7.1.1.6

dtpCtpDetectedPayload

Payload detected at this termination point.

INFINERA-TC-MIBInfnServiceType

Type Values:

1	notSet
2	bw10g
3	bw2d5g
4	oc48
5	oc192
6	bwtdm155
7	bwtdm622
8	stm16
9	stm64
10	ficon
11	escon
12	bw10Gbe
13	oc3
14	oc12
15	stm1
16	stm4
17	bw10Gcc
18	bw1Gbe
19	bw2d5Gcc
20	bw2d38Gcc
21	bw1G
22	bw2x1GbeChan
23	bw40g
24	stm256
25	stm256L1
26	stm256L2
27	stm256L3
28	stm256L4
29	oc768
30	oc768L1
31	oc768L2
32	oc768L3
33	oc768L4
34	bw4xoc192
35	bw4xstm64
36	bw10Gdtf
37	bw1Gfc
38	bw2Gfc
39	bw4Gfc
40	bw4Gcc
41	bw8Gfc
42	bw10Gfc
43	otu1
44	otu2
45	otu1e
46	otu2e
47	odu1
48	odu1e
49	odu2
50	odu2e
51	dv6000
52	escon200Mcc
53	ib2d5Gcc
54	ib10Gcc
55	hd1d485Gcc
56	hd1d483Gcc
57	sd270Mcc
58	dvb270Mcc
59	hdSdi3GPal
60	hdSdi3GNtsc
61	bw4Gig
62	bw8Gig
63	bw1d25g
64	otu2f
65	odu2f
66	bwVideo270
67	bw4GFc1
68	bw4GFc2
69	bw1d25Gcc
70	bw40Gbe
71	bw100Gbe
72	bw10d3Gcc
73	bw100g
74	bw40gbellane
75	bw100gbellane
76	bwOdui0
77	bwOdui1
78	bwOdui2
79	bwOdui3
80	bwOdui4
81	bwOdui3plus
82	bwOtui0
83	bwOtui1
84	bwOtui2
85	bwOtui3
86	bwOtui4
87	bwOtui3plus
88	bwOtu4
89	bwOtu3
90	bwOdu4
91	bwOdu3
92	bwOtu3e1
93	bwOtu3e2
94	bwOdu3e1
95	bwOdu3e2
96	bwOdu0
97	bwOduFlex
98	bwOduFlexI
99	bwGfp
100	bw11G1Cc
101	bwOtu2v
102	bwCcFlex
103	bw1G0625Cc
104	bw2G125Cc
105	bwOc768demux
106	bwStm256demux
107	bwTransparent
108	bw40gedemux
109	bw100gedemux
110	bwOdu1dtn
111	bWOdu2dtn
112	bWOdu1edtn
113	bWOdu2edtn
114	bW10X10gdemux
115	bwOdu2i4v
116	bwOdu2i10v
117	bw10gbe
118	bw100gbe
119	bwOtuAdapti
120	bwOduAdapti

Description:

The infinera supported payloads.

.1.3.6.1.4.1.21296.2.2.2.2.7.1.1.7

dtpCtpDataRate

Applicable to line DTPCTP and indicates the line data rate namley, 2.5G or 10G.

Enumeration

Enumerated Values:

1	rateNotSet
2	rate10GigAny
3	rate2g500mAny
4	rate1GogAny
5	rate40GigAny

.1.3.6.1.4.1.21296.2.2.2.2.7.1.1.8

dtpCtpLoopback

Flag to enable the loopback.

Enumerationr/w

Enumerated Values:

1	none
2	terminal
3	facility

.1.3.6.1.4.1.21296.2.2.2.2.7.1.1.9

dtpCtpInsertDtpTti

Flag that enables the TTI string to be entered and monitored at the far end.

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.21296.2.2.2.2.7.1.1.10

dtpCtpTtiAlarmReporting

Flag that indicates whether TTI alarm should be reported or not.

Enumerationr/w

Enumerated Values:

1	disabled
2	enabled

.1.3.6.1.4.1.21296.2.2.2.2.7.1.1.11

dtpCtpTxTtiAlarmReporting

Flag that indicates whether TTI alarm will be reported or not.

Enumerationr/w

Enumerated Values:

1	disabled
2	enabled

.1.3.6.1.4.1.21296.2.2.2.2.7.1.1.12

dtpCtpTxDtpTti

The transmitted Dtp trail trace identifier.

SNMPv2-TCDisplayStringr/w

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.21296.2.2.2.2.7.1.1.13

dtpCtpRxDtpTtiWrite

Applicable only for DTPCTP on GT-TAM to transmit the TTI in receive direction.

SNMPv2-TCDisplayStringr/w

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.21296.2.2.2.2.7.1.1.14

dtpCtpExpectedDtpTti

The expected Dtp trail trace identifier.

SNMPv2-TCDisplayStringr/w

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.21296.2.2.2.2.7.1.1.15

dtpCtpExpectedTxDtpTti

The Expected Tx TTI. If this is not equal to the zero-length string and it doesn't match?the recived TTI, an alarm will be raised.

SNMPv2-TCDisplayStringr/w

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.21296.2.2.2.2.7.1.1.16

dtpCtpRxDtpTti

The received Dtp trail trace identifier.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.21296.2.2.2.2.7.1.1.17

dtpCtpRecvTxDtpTti

The received transmit Dtp trail trace identifier.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.21296.2.2.2.2.7.1.1.18

dtpCtpDtpRxCv15MinutesTce

Count of bit errors detected at the DTF path layer in 15 minutes.

SNMPv2-SMICounter64r/w

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21296.2.2.2.2.7.1.1.19

dtpCtpDtpRxEs15MinutesTce

Count of the number of seconds during which at least one DTF Path layer BIP error was detected or an AIS-P defect was present in 15 minutes.

SNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21296.2.2.2.2.7.1.1.20

dtpCtpDtpRxSes15MinutesTce

Count of the seconds during which K (= 2,400 as specified in GR-253-CORE Issue 3 specification) or more DTF Path layer BIP errors were detected or an AIS-P defect was present in 15 minutes.

SNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21296.2.2.2.2.7.1.1.21

dtpCtpDtpRxUas15MinutesTce

Count of the seconds during which the DTF Path considered unavailable. A DTF Path becomes unavailable at the onset of 10 consecutive seconds that qualify as DTF-DLMSES-P, and continues to be unavailable until the onset …

SNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21296.2.2.2.2.7.1.1.22

dtpCtpDtpRxCvDayTce

Count of bit errors detected at the DTF path layer in 24 hours

SNMPv2-SMICounter64r/w

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21296.2.2.2.2.7.1.1.23

dtpCtpDtpRxEsDayTce

Count of the number of seconds during which at least one DTF Path layer BIP error was detected or an AIS-P defect was present in 24 hours.

SNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21296.2.2.2.2.7.1.1.24

dtpCtpDtpRxSesDayTce

Count of the seconds during which K (= 2,400 as specified in GR-253-CORE Issue 3 specification) or more DTF Path layer BIP errors were detected or an AIS-P defect was present in 24 hours.

SNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21296.2.2.2.2.7.1.1.25

dtpCtpDtpRxUasDayTce

SNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21296.2.2.2.2.7.1.1.26

dtpCtpDtpTxCv15MinutesTce

Count of bit errors detected at the DTF path layer in 15 minutes.

SNMPv2-SMICounter64r/w

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21296.2.2.2.2.7.1.1.27

dtpCtpDtpTxEs15MinutesTce

Count of the number of seconds during which (at any point during the second) at least one DTF Path layer BIP error was detected or an AIS-P defect was present in 15 minutes.

SNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21296.2.2.2.2.7.1.1.28

dtpCtpDtpTxSes15MinutesTce

Count of the seconds during which K (= 2,400 as specified in GR-253-CORE Issue 3 specification)or more DTF Path layer BIP errors were detected or an AIS-P defect was present in 15 minutes.

SNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21296.2.2.2.2.7.1.1.29

dtpCtpDtpTxUas15MinutesTce

SNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21296.2.2.2.2.7.1.1.30

dtpCtpDtpTxCvDayTce

Count of bit errors detected at the DTF path layer in 24 hours.

SNMPv2-SMICounter64r/w

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21296.2.2.2.2.7.1.1.31

dtpCtpDtpTxEsDayTce

Count of the number of seconds during which (at any point during the second) at least one DTF Path layer BIP error was detected or an AIS-P defect was present in 24 hours.

SNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21296.2.2.2.2.7.1.1.32

dtpCtpDtpTxSesDayTce

Count of the seconds during which K (= 2,400 as specified in GR-253-CORE Issue 3 specification)or more DTF Path layer BIP errors were detected or an AIS-P defect was present in 24 hours.

SNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21296.2.2.2.2.7.1.1.33

dtpCtpDtpTxUasDayTce

SNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21296.2.2.2.2.7.1.1.34

dtpCtpDtpRxCv15MinutesTceReporting

Flag that enables DtpRxCv15MinutesTce threshold crossing.

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.21296.2.2.2.2.7.1.1.35

dtpCtpDtpRxEs15MinutesTceReporting

Flag that enables the reporting of DtpRxEs15MinutesTce crossing.

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.21296.2.2.2.2.7.1.1.36

dtpCtpDtpRxSes15MinutesTceReporting

Flag that enables the reporting of DtpRxSes15MinutesTce crossing.

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.21296.2.2.2.2.7.1.1.37

dtpCtpDtpRxUas15MinutesTceReporting

Flag that enables the reporting of DtpRxUas15MinutesTce crossing.

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.21296.2.2.2.2.7.1.1.38

dtpCtpDtpRxCvDayTceReporting

Flag that enables DtpRxCvDayTce threshold crossing.

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.21296.2.2.2.2.7.1.1.39

dtpCtpDtpRxEsDayTceReporting

Flag that enables the reporting of DtpEsDayTce crossing.

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.21296.2.2.2.2.7.1.1.40

dtpCtpDtpRxSesDayTceReporting

Flag that enables the reporting of DtpRxSesDayTce crossing.

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.21296.2.2.2.2.7.1.1.41

dtpCtpDtpRxUasDayTceReporting

Flag that enables the reporting of DtpRxUasDayTce crossing.

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.21296.2.2.2.2.7.1.1.42

dtpCtpDtpTxCv15MinutesTceReporting

Flag that enables the reporting of DtpTxCv15MinutesTce crossing.

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.21296.2.2.2.2.7.1.1.43

dtpCtpDtpTxEs15MinutesTceReporting

Flag that enables the reporting of DtpTxEs15MinutesTce crossing.

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.21296.2.2.2.2.7.1.1.44

dtpCtpDtpTxSes15MinutesTceReporting

Flag that enables the reporting of DtpTxSes15MinutesTce crossing.

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.21296.2.2.2.2.7.1.1.45

dtpCtpDtpTxUas15MinutesTceReporting

Flag that enables the reporting of DtpTxUas15MinutesTce crossing.

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.21296.2.2.2.2.7.1.1.46

dtpCtpDtpTxCvDayTceReporting

Flag that enables the reporting of DtpTxCvDayTce crossing.

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.21296.2.2.2.2.7.1.1.47

dtpCtpDtpTxEsDayTceReporting

Flag that enables the reporting of DtpTxEsDayTce crossing.

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.21296.2.2.2.2.7.1.1.48

dtpCtpDtpTxSesDayTceReporting

Flag that enables the reporting of DtpTxSesDayTce crossing.

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.21296.2.2.2.2.7.1.1.49

dtpCtpDtpTxUasDayTceReporting

Flag that enables the reporting of DtpTxUasDayTce crossing.

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.21296.2.2.2.2.7.1.1.50

dtpCtpPrbsGenerationMode

Flag which enables the generation of PRBS data on the transmit side.

Enumerationr/w

Enumerated Values:

1	disabled
2	enabled

.1.3.6.1.4.1.21296.2.2.2.2.7.1.1.51

dtpCtpPrbsMonitoringMode

Flag which enables the monitoring of bit errors.

Enumerationr/w

Enumerated Values:

1	disabled
2	enabled

.1.3.6.1.4.1.21296.2.2.2.2.7.1.1.52

dtpCtpNumDtpSubCh

Number of channels muxed to a channlized cross-connect/snc.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21296.2.2.2.2.7.1.1.53

dtpCtpMuxMode

Flag that indicates whether the DTF is operating in multiplexed-mode (encapsulation of two GbE client tributaries) or not. For 8x1GbE TAM, the Mux mode is ?on? by default.

SNMPv2-TCTruthValue

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.21296.2.2.2.2.7.1.1.54

dtpCtpPmHistStatsEnable

Flag to enable PM collection.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.21296.2.2.2.2.7.1.1.55

dtpCtpCrossConnectType

The type of cross-connect.

Enumeration

Enumerated Values:

1	none
2	unidirectionFrom
3	unidirectionTo
4	unidirectionToAndFrom
5	bidirection
6	bidirectionUnidirectionFrom
7	bidirectionUnidirectionTo
8	bidirectionUnidirectionToAndFrom

.1.3.6.1.4.1.21296.2.2.2.2.7.1.1.56