INFINERA-TP-DLMOCGPTP-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
1
Rows
1
Columns
12
.1.3.6.1.4.1.21296.2.2.2.2.6.1 · 1 row entry · 12 columns
Uses the infinera variant from /opt/observium/mibs/infinera.
Command help
Walk dlmOcgPtpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'INFINERA-TP-DLMOCGPTP-MIB' -M '/opt/observium/mibs/infinera:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'INFINERA-TP-DLMOCGPTP-MIB::dlmOcgPtpTable'
A list of DlmOcgPtp entries. Each entry is uniquely identified by the value of ifIndex.
dlmOcgPtpEntry row .1.3.6.1.4.1.21296.2.2.2.2.6.1.1
A DlmOcgPtp entry containing information pertaining to Infinera DlmOcgPtp Interfaces.
This table is a subclass of IfCommon. Entries will exist in this table only for
interfaces of type DLM OCG PTP.
Indexes
Column Syntax OID
This refers to the name of the BMM OCG PTP to which this fiber is connected.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.21296.2.2.2.2.6.1.1.1
State of the auto discovery. Completed indicates that the exchange of ID with corresponding
BMM was successful. It does not tell whether there is a mismatch or not.
INFINERA-TC-MIBInfnAutoDiscoveryState
Type Values:
1inProgress
2completed
3unknown
4notValid
5failed
6waitToStart
7associated
.1.3.6.1.4.1.21296.2.2.2.2.6.1.1.2
Flag to enable or disable PM collection.
INFINERA-TC-MIBInfnPmHistStatsControlr/w
Type Values:
1enabled
2disabled
3unknown
.1.3.6.1.4.1.21296.2.2.2.2.6.1.1.3
Field that indicates if the OCG exists at the border of two
GMPLS domains, and is thus eligible for selection of Line-side DTPCTP
endpoints for circuit termination.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.21296.2.2.2.2.6.1.1.4
Parameter that indicates whether OCG Control Loop is enabled or disabled.
INFINERA-TC-MIBInfnOperationalStater/w
Type Values:
1disabled
2enabled
3unknown
Description:
SysConstOb::enumOprState
.1.3.6.1.4.1.21296.2.2.2.2.6.1.1.5
Provisioned OCG TP.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.21296.2.2.2.2.6.1.1.6
DisplayString OCG TP
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.21296.2.2.2.2.6.1.1.7
Line System Mode
INFINERA-TC-MIBInfnLineSystemModer/w
Type Values:
1modeOcg
2modeOpenWave
3modeScg
4modeScgPassiveMux-1
5modeOpenAutomated
6modeOcgPassiveMux-1
7unknown
.1.3.6.1.4.1.21296.2.2.2.2.6.1.1.8
Provisioned Peer TP
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.21296.2.2.2.2.6.1.1.9
Target Tx OCG Power
INFINERA-TC-MIBFloatTenthsr/w
Description:
An integer representation of a fractional number. The transmitted value is the actual value
multiplied by 10 and rounded to the nearest Integer. The management station should divide
the transmitted value by 10 to derive…
.1.3.6.1.4.1.21296.2.2.2.2.6.1.1.10
Channel Count
INFINERA-TC-MIBFloatTenthsr/w
Description:
An integer representation of a fractional number. The transmitted value is the actual value
multiplied by 10 and rounded to the nearest Integer. The management station should divide
the transmitted value by 10 to derive…
.1.3.6.1.4.1.21296.2.2.2.2.6.1.1.11
Aggregate Rate
INFINERA-TC-MIBFloatTenths
Description:
An integer representation of a fractional number. The transmitted value is the actual value
multiplied by 10 and rounded to the nearest Integer. The management station should divide
the transmitted value by 10 to derive…
.1.3.6.1.4.1.21296.2.2.2.2.6.1.1.12