INFINERA-TP-BANDCTP-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
1
Rows
1
Columns
31

bandCtpTable

table
.1.3.6.1.4.1.21296.2.2.2.2.2.1 · 1 row entry · 31 columns
Open in standard view
Uses the infinera variant from /opt/observium/mibs/infinera.
Command help
Walk bandCtpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'INFINERA-TP-BANDCTP-MIB' -M '/opt/observium/mibs/infinera:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'INFINERA-TP-BANDCTP-MIB::bandCtpTable' 
A list of BandCtp entries. Each entry is uniquely identified by the value of ifIndex.
bandCtpEntry row .1.3.6.1.4.1.21296.2.2.2.2.2.1.1
A BandCtp entry containing information pertaining to Infinera BandCtp interfaces
This table is a subclass of IfCommon.
Entries will exist in this table only for interfaces of type Band CTP.
These objects are auto create…
Indexes
Column Syntax OID
bandCtpMaxOCGs
Max number Of OCGs supportable in this band. This is not the actual OCGs that are available at any given point.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.21296.2.2.2.2.2.1.1.1
bandCtpChannelPlan
Tells the channel plan of the BMM/OAM. Odd implies the contained OCGs are 1,3,5,7 and even implies
that the contained OCGs follow the 2, 4, 6, 8 plan.
Enumeration
Enumerated Values:
1unknown
2odd
3even
4all
 .1.3.6.1.4.1.21296.2.2.2.2.2.1.1.2
bandCtpRxExpectedPowerNominal
Expected nominal power value that is configured by the installer.
0.1 dBmInteger32r/w
Constraints:
range: -400--10
 .1.3.6.1.4.1.21296.2.2.2.2.2.1.1.3
bandCtpSpanLoss1LowThreshold
This value specifies the decrease from ESL. When recived power
goes below (ESL - SpanLoss1LowThreshold) the TCC will be set.
INFINERA-TC-MIBFloatTenthsr/w
Description:
An integer representation of a fractional number. The transmitted value is the actual value
multiplied by 10 and rounded to the nearest Integer. The management station should divide
the transmitted value by 10 to derive…
 .1.3.6.1.4.1.21296.2.2.2.2.2.1.1.4
bandCtpSpanLoss1HighThreshold
This value specifies the increase from ESL. When recived power
crosses (ESL + SpanLoss1HighThreshold) the TCC will be set.
INFINERA-TC-MIBFloatTenthsr/w
Description:
An integer representation of a fractional number. The transmitted value is the actual value
multiplied by 10 and rounded to the nearest Integer. The management station should divide
the transmitted value by 10 to derive…
 .1.3.6.1.4.1.21296.2.2.2.2.2.1.1.5
bandCtpSpanLoss1ThldReporting
This attributes control the reporting of alarm on first gauge. This can be set enabled or disabled.
Enumerationr/w
Enumerated Values:
1disabled
2enabled
 .1.3.6.1.4.1.21296.2.2.2.2.2.1.1.6
bandCtpExpectedSpanLoss
The expected power on this Fiber. This value is different for different span length, connectors,
splices etc. This attribute is configured by the user. The expected Span Loss is measured on the
fiber.
0.1 dbInteger32r/w
Constraints:
range: 0-400
 .1.3.6.1.4.1.21296.2.2.2.2.2.1.1.7
bandCtpSpanLossReporting
If enabled(2), span loss reporting will proceed based on the provided expectedSpanLoss and
maxEngineeredSpanLoss attributes. If set to disabled(1), the spanLossExceededLimit alarms/TCC
is suppressed.
Enumerationr/w
Enumerated Values:
1disabled
2enabled
 .1.3.6.1.4.1.21296.2.2.2.2.2.1.1.8
bandCtpMaxEngineeredSpanLoss
Span loss information from the route planner.
0.1 dbInteger32r/w
Constraints:
range: 0-400
 .1.3.6.1.4.1.21296.2.2.2.2.2.1.1.9
bandCtpALSAction
Flag that indicates the automatic laser shutdown setttings.
Enumerationr/w
Enumerated Values:
1disabled
2enabled
 .1.3.6.1.4.1.21296.2.2.2.2.2.1.1.10
bandCtpALSDisableTime
The time interval (in minutes) for which ALS will be disabled.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.21296.2.2.2.2.2.1.1.11
bandCtpPmHistStatsEnable
Flag to enable or disable PM collection.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.21296.2.2.2.2.2.1.1.12
bandCtpOprLowThreshold
This object specifies low threshold value for received C band power.
0.1 dbINFINERA-TC-MIBFloatTenthsr/w
Description:
An integer representation of a fractional number. The transmitted value is the actual value
multiplied by 10 and rounded to the nearest Integer. The management station should divide
the transmitted value by 10 to derive…
 .1.3.6.1.4.1.21296.2.2.2.2.2.1.1.13
bandCtpOprHighThreshold
This object specifies high threshold value for received C band power.
0.1 dbINFINERA-TC-MIBFloatTenthsr/w
Description:
An integer representation of a fractional number. The transmitted value is the actual value
multiplied by 10 and rounded to the nearest Integer. The management station should divide
the transmitted value by 10 to derive…
 .1.3.6.1.4.1.21296.2.2.2.2.2.1.1.14
bandCtpCBandOlosSoakTime
 Enumerationr/w
Enumerated Values:
1fast
2medium
3long
 .1.3.6.1.4.1.21296.2.2.2.2.2.1.1.15
bandCtpSpanLoss2LowThreshold
Span loss-2 Low threshold
INFINERA-TC-MIBFloatTenthsr/w
Description:
An integer representation of a fractional number. The transmitted value is the actual value
multiplied by 10 and rounded to the nearest Integer. The management station should divide
the transmitted value by 10 to derive…
 .1.3.6.1.4.1.21296.2.2.2.2.2.1.1.16
bandCtpSpanLoss2HighThreshold
Span loss-2 high threshold
INFINERA-TC-MIBFloatTenthsr/w
Description:
An integer representation of a fractional number. The transmitted value is the actual value
multiplied by 10 and rounded to the nearest Integer. The management station should divide
the transmitted value by 10 to derive…
 .1.3.6.1.4.1.21296.2.2.2.2.2.1.1.17
bandCtpSpanLoss2ThldReporting
Span loss-2 threshold reporting enable/disable
INFINERA-TC-MIBInfnReportingr/w
Type Values:
1disabled
2enabled
3unknown
 .1.3.6.1.4.1.21296.2.2.2.2.2.1.1.18
bandCtpCustomMargin
Custom margin
INFINERA-TC-MIBFloatTenthsr/w
Description:
An integer representation of a fractional number. The transmitted value is the actual value
multiplied by 10 and rounded to the nearest Integer. The management station should divide
the transmitted value by 10 to derive…
 .1.3.6.1.4.1.21296.2.2.2.2.2.1.1.19
bandCtpALSDisableMode
ALS disable mode
INFINERA-TC-MIBInfnALSDisableModer/w
Type Values:
1timerBased
2permament
3notApplicable
 .1.3.6.1.4.1.21296.2.2.2.2.2.1.1.20
bandCtpSlotOperatingMode
Slot Operating Mode
INFINERA-TC-MIBInfnSlotOperatingMode
Type Values:
1unknown
2standaloneWithOSC
3pairedWithoutOSC
4standaloneWithoutOSC
 .1.3.6.1.4.1.21296.2.2.2.2.2.1.1.21
bandCtpTeInterfaceList
TE Interface List
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.21296.2.2.2.2.2.1.1.22
bandCtpRxEDFAGainMode
RX EDFA Gain Mode
INFINERA-TC-MIBInfnRxEDFAGainModer/w
Type Values:
1unknown
2lg
3hg
Description:
SyslogConstOb::enumRxEDFAGainMode
 .1.3.6.1.4.1.21296.2.2.2.2.2.1.1.23
bandCtpRxEDFAGainModeValue
RX EDFA Gain Mode Value
INFINERA-TC-MIBInfnRxEDFAGainMode
Type Values:
1unknown
2lg
3hg
Description:
SyslogConstOb::enumRxEDFAGainMode
 .1.3.6.1.4.1.21296.2.2.2.2.2.1.1.24
bandCtpRxEDFAGain
RX EDFA Gain
INFINERA-TC-MIBFloatArbitraryPrecisionr/w
Type Constraints:
range: 0..255
Description:
An ascii representation of a possibly signed decimal floating point number of arbitrary precision.
This string can contain only digits and the characters '-' and '.'
 .1.3.6.1.4.1.21296.2.2.2.2.2.1.1.25
bandCtpRxEDFATilt
RX EDFA Tilt
INFINERA-TC-MIBFloatTenthsr/w
Description:
An integer representation of a fractional number. The transmitted value is the actual value
multiplied by 10 and rounded to the nearest Integer. The management station should divide
the transmitted value by 10 to derive…
 .1.3.6.1.4.1.21296.2.2.2.2.2.1.1.26
bandCtpTxEDFAInputPowerOffset
TX EDFA Input Power Offset
INFINERA-TC-MIBFloatTenthsr/w
Description:
An integer representation of a fractional number. The transmitted value is the actual value
multiplied by 10 and rounded to the nearest Integer. The management station should divide
the transmitted value by 10 to derive…
 .1.3.6.1.4.1.21296.2.2.2.2.2.1.1.27
bandCtpMuxFreqSlotAttenProfile
Mux Frequency Slot Attenuation Profile
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.21296.2.2.2.2.2.1.1.28
bandCtpDemuxFreqSlotAttenProfile
Demux Frequency Slot Attenuation Profile
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.21296.2.2.2.2.2.1.1.29
bandCtpTxVOA
TX EDFA Input Power Offset
INFINERA-TC-MIBFloatTenthsr/w
Description:
An integer representation of a fractional number. The transmitted value is the actual value
multiplied by 10 and rounded to the nearest Integer. The management station should divide
the transmitted value by 10 to derive…
 .1.3.6.1.4.1.21296.2.2.2.2.2.1.1.30
bandCtpTargetLineOutputPower
TX EDFA Input Power Offset
INFINERA-TC-MIBFloatTenthsr/w
Description:
An integer representation of a fractional number. The transmitted value is the actual value
multiplied by 10 and rounded to the nearest Integer. The management station should divide
the transmitted value by 10 to derive…
 .1.3.6.1.4.1.21296.2.2.2.2.2.1.1.31