INFINERA-PM-SDHCLIENTCTP-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

sdhClientCtpPmRealTable

table

.1.3.6.1.4.1.21296.2.2.1.11.1.1 · 1 row entry · 18 columns

Open in standard view

Uses the infinera variant from /opt/observium/mibs/infinera.

Command help

Walk sdhClientCtpPmRealTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'INFINERA-PM-SDHCLIENTCTP-MIB' -M '/opt/observium/mibs/infinera:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'INFINERA-PM-SDHCLIENTCTP-MIB::sdhClientCtpPmRealTable'

A list of SdhClientCtpPmReal entries. Each entry is uniquely identified by the value of ifIndex.

sdhClientCtpPmRealEntry row .1.3.6.1.4.1.21296.2.2.1.11.1.1.1

A SdhClientCtp entry containing real-time performance information pertaining to Infinera SdhClientCtp interfaces.
Entries will exist in this table for interfaces of type sdhclientCtp.

Indexes

IF-MIBifIndex

Column	Syntax	OID
sdhClientCtpPmRealRxBE Count of the number of errors within a block in the incoming client?s SDH signal. All Infinera SDH interfaces use 8000 blocks/sec, regardless of signal rate.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.21296.2.2.1.11.1.1.1.1`
sdhClientCtpPmRealRxES Count of the number of seconds during which (at any point during the second) at least one RS block error was detected or an LOS or LOF defect is present.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.21296.2.2.1.11.1.1.1.2`
sdhClientCtpPmRealRxSES Count of the seconds during which 30% or more RS block errors (BE) were detected or an LOF or LOS defect was present.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.21296.2.2.1.11.1.1.1.3`
sdhClientCtpPmRealRxOFS Regenerator Section - Out of Frame Seconds. Count of seconds during which an OOF defect is present (at any point in the second).	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.21296.2.2.1.11.1.1.1.4`
sdhClientCtpPmRealRxLOSS Regenerator Section - Loss of Signal Seconds. Count of seconds during which any LOS defect (OLOS or dLOS) existed.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.21296.2.2.1.11.1.1.1.5`
sdhClientCtpPmRealTxBE Count of the number of errors within a block in the SDH signal received from the network and to be transmitted to the receiving client. NOTE: All Infinera SDH interfaces use 8000 blocks/sec, regardless of signal rate.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.21296.2.2.1.11.1.1.1.6`
sdhClientCtpPmRealTxES Count of the number of seconds during which (at any point during the second) at least one Tx RS block error was detected or a de-encap (Tx) LOS or LOF defect was present.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.21296.2.2.1.11.1.1.1.7`
sdhClientCtpPmRealTxSES Count of the seconds during which 30% or more Tx RS block errors (BE) were detected or a de-encap (Tx) LOF or LOS defect was present.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.21296.2.2.1.11.1.1.1.8`
sdhClientCtpPmRealTxOFS Regenerator Section - Out of Frame Seconds. Count of seconds during which a de-encap (Tx) OOF defect was present.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.21296.2.2.1.11.1.1.1.9`
sdhClientCtpPmRealCktId Circuit ID(s) of the connection created on the SDH termination point.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.21296.2.2.1.11.1.1.1.10`
sdhClientCtpPmRealLinePRBSSyncErr Count of the number of times re-sync has been attempted after initial sync was achieved. Incremented only when Line PRBS monitoring is enabled.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.21296.2.2.1.11.1.1.1.11`
sdhClientCtpPmRealLinePRBSErr Count of the number of bits not matching the expected pattern (whether synch has been achieved or not). Incremented only when Line PRBS monitoring is enabled.	HC-PerfHist-TC-MIBHCPerfIntervalCount	`.1.3.6.1.4.1.21296.2.2.1.11.1.1.1.12`
sdhClientCtpPmRealTribPRBSSyncErr Count of the number of times re-sync has been attempted after initial sync was achieved. Incremented only when Trib PRBS monitoring is enabled.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.21296.2.2.1.11.1.1.1.13`
sdhClientCtpPmRealTribPRBSErr Count of the number of bits not matching the expected pattern (whether synch has been achieved or not). Incre mented only when Trib PRBS monitoring is enabled.	HC-PerfHist-TC-MIBHCPerfIntervalCount	`.1.3.6.1.4.1.21296.2.2.1.11.1.1.1.14`
sdhClientCtpPmRealRxUAS Regenerator Section - Unavailable seconds.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.21296.2.2.1.11.1.1.1.15`
sdhClientCtpPmRealTxUAS Count of Un available seconds.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.21296.2.2.1.11.1.1.1.16`
sdhClientCtpPmRealRxBER Receive Bit Error Rate..	INFINERA-TC-MIBFloatArbitraryPrecision Type Constraints: `range: 0..255` Description: An ascii representation of a possibly signed decimal floating point number of arbitrary precision. This string can contain only digits and the characters '-' and '.'	`.1.3.6.1.4.1.21296.2.2.1.11.1.1.1.17`
sdhClientCtpPmRealTxBER Transmit Bit Error Rate.	INFINERA-TC-MIBFloatArbitraryPrecision Type Constraints: `range: 0..255` Description: An ascii representation of a possibly signed decimal floating point number of arbitrary precision. This string can contain only digits and the characters '-' and '.'	`.1.3.6.1.4.1.21296.2.2.1.11.1.1.1.18`

sdhClientCtpPmTable

table

.1.3.6.1.4.1.21296.2.2.1.11.1.2 · 1 row entry · 20 columns

Open in standard view

Uses the infinera variant from /opt/observium/mibs/infinera.

Command help

Walk sdhClientCtpPmTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'INFINERA-PM-SDHCLIENTCTP-MIB' -M '/opt/observium/mibs/infinera:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'INFINERA-PM-SDHCLIENTCTP-MIB::sdhClientCtpPmTable'

A list of SdhClientCtpPm entries. Each entry is uniquely identified by the value of ifIndex, sampleDuration and sdhClientCtpPmTimestamp.

sdhClientCtpPmEntry row .1.3.6.1.4.1.21296.2.2.1.11.1.2.1

A SdhClientCtp entry containing historical performance information pertaining to Infinera SdhClientCtp interfaces.
Entries will exist in this table for interfaces of type sdhclientCtp.
Each interface may have a number o…

Indexes

IF-MIBifIndex sdhClientCtpPmSampleDuration sdhClientCtpPmTimestamp

Column Syntax OID

sdhClientCtpPmTimestamp

End Time stamp for this interval. If this time is later than the current time,
then the data for this bucket is currently being collected.

Integer32

Constraints:
range: 0-2147483647

.1.3.6.1.4.1.21296.2.2.1.11.1.2.1.1

sdhClientCtpPmSampleDuration

The duration of this sample.

Enumeration

Enumerated Values:

1	fifteenMinutes
2	day

.1.3.6.1.4.1.21296.2.2.1.11.1.2.1.2

sdhClientCtpPmValidity

Flag indicating if data was valid for the entire interval

SNMPv2-TCTruthValue

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.21296.2.2.1.11.1.2.1.3

sdhClientCtpPmRxBE

Count of the number of errors within a block in the incoming client?s SDH signal. All Infinera SDH interfaces use 8000 blocks/sec, regardless of signal rate.

HC-PerfHist-TC-MIBHCPerfIntervalCount

.1.3.6.1.4.1.21296.2.2.1.11.1.2.1.4

sdhClientCtpPmRxES

Count of the number of seconds during which (at any point during the second) at least one RS block error was detected or an LOS or LOF defect is present.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21296.2.2.1.11.1.2.1.5

sdhClientCtpPmRxSES

Count of the seconds during which 30% or more RS block errors (BE) were detected or an LOF or LOS defect was present.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21296.2.2.1.11.1.2.1.6

sdhClientCtpPmRxOFS

Regenerator Section - Out of Frame Seconds. Count of seconds during which an OOF defect is present (at any point in the second).

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21296.2.2.1.11.1.2.1.7

sdhClientCtpPmRxLOSS

Regenerator Section - Loss of Signal Seconds. Count of seconds during which any LOS defect (OLOS or dLOS) existed.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21296.2.2.1.11.1.2.1.8

sdhClientCtpPmTxBE

Count of the number of errors within a block in the SDH signal received from the network and to be transmitted to the receiving client. All Infinera SDH interfaces use 8000 blocks/sec, regardless of signal rate.

HC-PerfHist-TC-MIBHCPerfIntervalCount

.1.3.6.1.4.1.21296.2.2.1.11.1.2.1.9

sdhClientCtpPmTxES

Count of the number of seconds during which (at any point during the second) at least one Tx RS block error was detected or a de-encap (Tx) LOS or LOF defect was present.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21296.2.2.1.11.1.2.1.10

sdhClientCtpPmTxSES

Count of the seconds during which 30% or more Tx RS block errors (BE) were detected or a de-encap (Tx) LOF or LOS defect was present.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21296.2.2.1.11.1.2.1.11

sdhClientCtpPmTxOFS

Regenerator Section - Out of Frame Seconds. Count of seconds during which a de-encap (Tx) OOF defect was present.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21296.2.2.1.11.1.2.1.12

sdhClientCtpPmCktId

Circuit ID(s) of the connection created on the SDH termination point.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.21296.2.2.1.11.1.2.1.13

sdhClientCtpPmTribPRBSSyncErr

Count of the number of times re-sync has been attempted after initial sync was achieved. Incremented only when Trib PRBS monitoring is enabled.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21296.2.2.1.11.1.2.1.14

sdhClientCtpPmTribPRBSErr

Count of the number of bits not matching the expected pattern (whether synch has been achieved or not). Incre mented only when Trib PRBS monitoring is enabled.

HC-PerfHist-TC-MIBHCPerfIntervalCount

.1.3.6.1.4.1.21296.2.2.1.11.1.2.1.15

sdhClientCtpPmPayloadType

The payload type.

INFINERA-TC-MIBInfnServiceType

Type Values:

1	notSet
2	bw10g
3	bw2d5g
4	oc48
5	oc192
6	bwtdm155
7	bwtdm622
8	stm16
9	stm64
10	ficon
11	escon
12	bw10Gbe
13	oc3
14	oc12
15	stm1
16	stm4
17	bw10Gcc
18	bw1Gbe
19	bw2d5Gcc
20	bw2d38Gcc
21	bw1G
22	bw2x1GbeChan
23	bw40g
24	stm256
25	stm256L1
26	stm256L2
27	stm256L3
28	stm256L4
29	oc768
30	oc768L1
31	oc768L2
32	oc768L3
33	oc768L4
34	bw4xoc192
35	bw4xstm64
36	bw10Gdtf
37	bw1Gfc
38	bw2Gfc
39	bw4Gfc
40	bw4Gcc
41	bw8Gfc
42	bw10Gfc
43	otu1
44	otu2
45	otu1e
46	otu2e
47	odu1
48	odu1e
49	odu2
50	odu2e
51	dv6000
52	escon200Mcc
53	ib2d5Gcc
54	ib10Gcc
55	hd1d485Gcc
56	hd1d483Gcc
57	sd270Mcc
58	dvb270Mcc
59	hdSdi3GPal
60	hdSdi3GNtsc
61	bw4Gig
62	bw8Gig
63	bw1d25g
64	otu2f
65	odu2f
66	bwVideo270
67	bw4GFc1
68	bw4GFc2
69	bw1d25Gcc
70	bw40Gbe
71	bw100Gbe
72	bw10d3Gcc
73	bw100g
74	bw40gbellane
75	bw100gbellane
76	bwOdui0
77	bwOdui1
78	bwOdui2
79	bwOdui3
80	bwOdui4
81	bwOdui3plus
82	bwOtui0
83	bwOtui1
84	bwOtui2
85	bwOtui3
86	bwOtui4
87	bwOtui3plus
88	bwOtu4
89	bwOtu3
90	bwOdu4
91	bwOdu3
92	bwOtu3e1
93	bwOtu3e2
94	bwOdu3e1
95	bwOdu3e2
96	bwOdu0
97	bwOduFlex
98	bwOduFlexI
99	bwGfp
100	bw11G1Cc
101	bwOtu2v
102	bwCcFlex
103	bw1G0625Cc
104	bw2G125Cc
105	bwOc768demux
106	bwStm256demux
107	bwTransparent
108	bw40gedemux
109	bw100gedemux
110	bwOdu1dtn
111	bWOdu2dtn
112	bWOdu1edtn
113	bWOdu2edtn
114	bW10X10gdemux
115	bwOdu2i4v
116	bwOdu2i10v
117	bw10gbe
118	bw100gbe
119	bwOtuAdapti
120	bwOduAdapti

Description:

The infinera supported payloads.

.1.3.6.1.4.1.21296.2.2.1.11.1.2.1.16

sdhClientCtpPmRxUAS

Count of the Unavailable seconds.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21296.2.2.1.11.1.2.1.17

sdhClientCtpPmTxUAS

Count of the Unavailable seconds.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21296.2.2.1.11.1.2.1.18

sdhClientCtpPmLinePRBSSyncErr

Count of the number of times re-sync has been attempted after initial sync was achieved. Incremented only when Line PRBS monitoring is enabled.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21296.2.2.1.11.1.2.1.19

sdhClientCtpPmLinePRBSErr

Count of the number of bits not matching the expected pattern (whether synch has been achieved or not). Incre mented only when Line PRBS monitoring is enabled.

HC-PerfHist-TC-MIBHCPerfIntervalCount

.1.3.6.1.4.1.21296.2.2.1.11.1.2.1.20