IMM-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
50
Rows
50
Columns
469

tempTable

table mandatory
.1.3.6.1.4.1.2.3.51.3.1.1.2 · 1 row entry · 11 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk tempTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IMM-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IMM-MIB::tempTable' 
This table contains temperature measurement information.
tempEntry row .1.3.6.1.4.1.2.3.51.3.1.1.2.1
Each row contains parameters related to a temperature measurement channel.
Indexes
Column Syntax OID
tempIndexmandatory
This column is used to identify a particular
temperature measurement channel.
Integer32
Constraints:
range: 1-100
 .1.3.6.1.4.1.2.3.51.3.1.1.2.1.1
tempDescrmandatory
A description of the temperature measurement
channel.
OctetString
Constraints:
range: 0-31
 .1.3.6.1.4.1.2.3.51.3.1.1.2.1.2
tempReadingmandatory
The measured temperature.
Degrees CelsiusInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2.3.51.3.1.1.2.1.3
tempNominalReadingmandatory
The nominal temperature, if available.
Degrees CelsiusInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2.3.51.3.1.1.2.1.4
tempNonRecovLimitHighmandatory
The non-recoverable limit for the measured temperature. If
the measured value rises above this limit a trap is sent.
Degrees CelsiusInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2.3.51.3.1.1.2.1.5
tempCritLimitHighmandatory
The critical limit for the measured temperature. If
the measured value rises above this limit a trap is sent.
Degrees CelsiusInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2.3.51.3.1.1.2.1.6
tempNonCritLimitHighmandatory
The non-critical limit for the measured temperature. If
the measured value rises above this limit a trap is sent.
Degrees CelsiusInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2.3.51.3.1.1.2.1.7
tempNonRecovLimitLowmandatory
The non-recoverable limit for the measured temperature. If
the measured value falls below this limit a trap is sent.
Degrees CelsiusInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2.3.51.3.1.1.2.1.8
tempCritLimitLowmandatory
The critical limit for the measured temperature. If
the measured value falls below this limit a trap is sent.
Degrees CelsiusInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2.3.51.3.1.1.2.1.9
tempNonCritLimitLowmandatory
The non-critical limit for the measured temperature. If
the measured value falls below this limit a trap is sent.
Degrees CelsiusInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2.3.51.3.1.1.2.1.10
tempHealthStatusmandatory
A description of the temperature component status.
OctetString
Constraints:
range: 0-31
 .1.3.6.1.4.1.2.3.51.3.1.1.2.1.11

voltTable

table mandatory
.1.3.6.1.4.1.2.3.51.3.1.2.2 · 1 row entry · 11 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk voltTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IMM-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IMM-MIB::voltTable' 
This table contains voltage measurement information.
voltEntry row .1.3.6.1.4.1.2.3.51.3.1.2.2.1
Each row contains parameters related to a
voltage measurement channel.
Indexes
Column Syntax OID
voltIndexmandatory
This column is used to identify a particular
voltage measurement channel.
Integer32
Constraints:
range: 1-1000
 .1.3.6.1.4.1.2.3.51.3.1.2.2.1.1
voltDescrmandatory
A description of the voltage measurement channel.
OctetString
Constraints:
range: 0-31
 .1.3.6.1.4.1.2.3.51.3.1.2.2.1.2
voltReadingmandatory
The measured voltage.
MillivoltsInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2.3.51.3.1.2.2.1.3
voltNominalReadingmandatory
The nominal voltage, if available.
MillivoltsInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2.3.51.3.1.2.2.1.4
voltNonRecovLimitHighmandatory
The high non-recoverable limit for the measured voltage. If the
measured value falls above this limit a trap is sent.
MillivoltsInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2.3.51.3.1.2.2.1.5
voltCritLimitHighmandatory
The high critical limit for the measured voltage. If the
measured value rises above this limit a trap is sent.
MillivoltsInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2.3.51.3.1.2.2.1.6
voltNonCritLimitHighmandatory
The high non-critical limit for the measured voltage. If the
measured value rises above this limit a trap is sent.
MillivoltsInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2.3.51.3.1.2.2.1.7
voltNonRecovLimitLowmandatory
The low non-recoverable limit for the measured voltage. If the
measured value falls below this limit a trap is sent.
MillivoltsInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2.3.51.3.1.2.2.1.8
voltCritLimitLowmandatory
The low critical limit for the measured voltage. If the
measured value falls below this limit a trap is sent.
MillivoltsInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2.3.51.3.1.2.2.1.9
voltNonCritLimitLowmandatory
The low non-critical limit for the measured voltage. If the
measured value falls below this limit a trap is sent.
MillivoltsInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2.3.51.3.1.2.2.1.10
voltHealthStatusmandatory
A description of the voltage component status.
OctetString
Constraints:
range: 0-31
 .1.3.6.1.4.1.2.3.51.3.1.2.2.1.11

fanTable

table mandatory
.1.3.6.1.4.1.2.3.51.3.1.3.2 · 1 row entry · 10 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk fanTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IMM-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IMM-MIB::fanTable' 
This table contains fan information.
fanEntry row .1.3.6.1.4.1.2.3.51.3.1.3.2.1
Each row contains parameters related to a fan.
Indexes
Column Syntax OID
fanIndexmandatory
This column is used to identify a particular fan.
Integer32
Constraints:
range: 1-100
 .1.3.6.1.4.1.2.3.51.3.1.3.2.1.1
fanDescrmandatory
A description of the fan measurement channel.
OctetString
Constraints:
range: 0-31
 .1.3.6.1.4.1.2.3.51.3.1.3.2.1.2
fanSpeedmandatory
Fan speed expressed in percent(%) of maximum RPM.
An octet string expressed as 'ddd% of maximum' where:
d is a decimal digit or blank space for a leading zero.
If the fan is determined not to be running or
the fan sp…
OctetString .1.3.6.1.4.1.2.3.51.3.1.3.2.1.3
fanNonRecovLimitHighmandatory
The high non-recoverable limit for the measured fan. If the
measured value falls above this limit a trap is sent.
RPMInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2.3.51.3.1.3.2.1.4
fanCritLimitHighmandatory
The high critical limit for the measured fan. If the
measured value rises above this limit a trap is sent.
RPMInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2.3.51.3.1.3.2.1.5
fanNonCritLimitHighmandatory
The high non-critical limit for the measured fan. If the
measured value rises above this limit a trap is sent.
RPMInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2.3.51.3.1.3.2.1.6
fanNonRecovLimitLowmandatory
The low non-recoverable limit for the measured fan. If the
measured value falls below this limit a trap is sent.
RPMInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2.3.51.3.1.3.2.1.7
fanCritLimitLowmandatory
The low critical limit for the measured fan. If the
measured value falls below this limit a trap is sent.
RPMInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2.3.51.3.1.3.2.1.8
fanNonCritLimitLowmandatory
The low non-critical limit for the measured fan. If the
measured value falls below this limit a trap is sent.
RPMInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2.3.51.3.1.3.2.1.9
fanHealthStatusmandatory
A description of the fan component status.
OctetString
Constraints:
range: 0-31
 .1.3.6.1.4.1.2.3.51.3.1.3.2.1.10

systemHealthSummaryTable

table mandatory
.1.3.6.1.4.1.2.3.51.3.1.4.2 · 1 row entry · 3 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk systemHealthSummaryTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IMM-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IMM-MIB::systemHealthSummaryTable' 
Table of System Health summary. Contains more detailed 
information about the reasons for the overall system 
health status.
systemHealthSummaryEntry row .1.3.6.1.4.1.2.3.51.3.1.4.2.1
System Health Summary entry
Indexes
Column Syntax OID
systemHealthSummaryIndexmandatory
System health summary index.
Integer32
Constraints:
range: 1-1000
 .1.3.6.1.4.1.2.3.51.3.1.4.2.1.1
systemHealthSummarySeveritymandatory
System health summary severity.
OctetString .1.3.6.1.4.1.2.3.51.3.1.4.2.1.2
systemHealthSummaryDescriptionmandatory
System health summary description.
OctetString .1.3.6.1.4.1.2.3.51.3.1.4.2.1.3

immVpdTable

table mandatory
.1.3.6.1.4.1.2.3.51.3.1.5.1 · 1 row entry · 4 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk immVpdTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IMM-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IMM-MIB::immVpdTable' 
Table of IMM VPD.
immVpdEntry row .1.3.6.1.4.1.2.3.51.3.1.5.1.1
iMBC VPD entry.
Indexes
Column Syntax OID
immVpdIndexmandatory
IMM VPD index.
Integer32
Constraints:
range: 1-1000
 .1.3.6.1.4.1.2.3.51.3.1.5.1.1.1
immVpdTypemandatory
IMM VPD Type. Indicates either Bios or Diag or spFimware VPD
OctetString .1.3.6.1.4.1.2.3.51.3.1.5.1.1.2
immVpdVersionStringmandatory
IMM VPD Version Number of the software(Bios/Diag/spFirmware).
For IMM2 the string contains both the Build ID and the Version
Number, for example, like '1AOO3A v1.0.1'.
OctetString .1.3.6.1.4.1.2.3.51.3.1.5.1.1.3
immVpdReleaseDatemandatory
IMM VPD Release Date of when the software(Bios/Diag/spFirmware) was released.
OctetString .1.3.6.1.4.1.2.3.51.3.1.5.1.1.4

systemComponentLevelVpdTable

table mandatory
.1.3.6.1.4.1.2.3.51.3.1.5.17 · 1 row entry · 5 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk systemComponentLevelVpdTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IMM-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IMM-MIB::systemComponentLevelVpdTable' 
Table of the system component hardware VPD information.  View as a 
table and not as individual entries for consistent results.
systemComponentLevelVpdEntry row .1.3.6.1.4.1.2.3.51.3.1.5.17.1
System component hardware VPD entry. View as a table and not as
individual entries for consistent results.
Indexes
Column Syntax OID
componentLevelVpdIndexmandatory
System component level VPD index. View as a table and not as individual
entries for consistent results.
Integer32
Constraints:
range: 1-1000
 .1.3.6.1.4.1.2.3.51.3.1.5.17.1.1
componentLevelVpdFruNumbermandatory
System component level VPD FRU number. View as a table and not as
individual entries for consistent results.
OctetString .1.3.6.1.4.1.2.3.51.3.1.5.17.1.2
componentLevelVpdFruNamemandatory
System component level VPD FRU name. View as a table and not as
individual entries for consistent results.
OctetString .1.3.6.1.4.1.2.3.51.3.1.5.17.1.3
componentLevelVpdSerialNumbermandatory
System component level VPD serial number. View as a table and not as
individual entries for consistent results.
OctetString .1.3.6.1.4.1.2.3.51.3.1.5.17.1.4
componentLevelVpdManufacturingIdmandatory
System component level VPD manufacturing ID. View as a table and not as
individual entries for consistent results.
OctetString .1.3.6.1.4.1.2.3.51.3.1.5.17.1.5

systemComponentLevelVpdTrackingTable

table mandatory
.1.3.6.1.4.1.2.3.51.3.1.5.18 · 1 row entry · 7 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk systemComponentLevelVpdTrackingTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IMM-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IMM-MIB::systemComponentLevelVpdTrackingTable' 
Table of system component hardware VPD tracking activity log.  View as
a table and not as individual entries for consistent results.
systemComponentLevelVpdTrackingEntry row .1.3.6.1.4.1.2.3.51.3.1.5.18.1
System component hardware VPD tracking activity log entry. View as a
table and not as individual entries for consistent results.
Indexes
Column Syntax OID
componentLevelVpdTrackingIndexmandatory
System component level VPD tracking activity log index. View as a table
and not as individual entries for consistent results.
Integer32
Constraints:
range: 1-1000
 .1.3.6.1.4.1.2.3.51.3.1.5.18.1.1
componentLevelVpdTrackingFruNumbermandatory
System component level VPD tracking activity log FRU number. View as a
table and not as individual entries for consistent results.
OctetString .1.3.6.1.4.1.2.3.51.3.1.5.18.1.2
componentLevelVpdTrackingFruNamemandatory
System component level VPD tracking activity log FRU name. View as a
table and not as individual entries for consistent results.
OctetString .1.3.6.1.4.1.2.3.51.3.1.5.18.1.3
componentLevelVpdTrackingSerialNumbermandatory
System component level VPD tracking activity log serial number. View as
a table and not as individual entries for consistent results.
OctetString .1.3.6.1.4.1.2.3.51.3.1.5.18.1.4
componentLevelVpdTrackingManufacturingIdmandatory
System component level VPD tracking activity log manufacturing ID. View
as a table and not as individual entries for consistent results.
OctetString .1.3.6.1.4.1.2.3.51.3.1.5.18.1.5
componentLevelVpdTrackingActionmandatory
System component level VPD tracking activity log action(added/removed).
View as a table and not as individual entries for consistent results.
OctetString .1.3.6.1.4.1.2.3.51.3.1.5.18.1.6
componentLevelVpdTrackingTimestampmandatory
System component level VPD tracking activity log timestanp.
View as a table and not as individual entries for consistent results.
OctetString .1.3.6.1.4.1.2.3.51.3.1.5.18.1.7

hostMACAddressTable

table mandatory
.1.3.6.1.4.1.2.3.51.3.1.5.19 · 1 row entry · 3 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk hostMACAddressTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IMM-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IMM-MIB::hostMACAddressTable' 
Table of MAC addresses of the host NICs.
For consistent results, view as a table and not as individual entries.
hostMACAddressEntry row .1.3.6.1.4.1.2.3.51.3.1.5.19.1
Host MAC address entry.
For consistent results, view as a table and not as individual entries.
Indexes
Column Syntax OID
hostMACAddressIndexmandatory
Host MAC address index. View as a table and not as individual
entries for consistent results.
Integer32
Constraints:
range: 1-1000
 .1.3.6.1.4.1.2.3.51.3.1.5.19.1.1
hostMACAddressDescriptionmandatory
Description of the MAC Address entry. View as a table and not as
individual entries for consistent results.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.5.19.1.2
hostMACAddressmandatory
Host MAC address must be a hexadecimal value between 000000000000 - FFFFFFFFFFFF.
This value must be in the form XX:XX:XX:XX:XX:XX View as a table and not as
individual entries for consistent results.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.5.19.1.3

systemCPUVpdTable

table mandatory
.1.3.6.1.4.1.2.3.51.3.1.5.20 · 1 row entry · 12 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk systemCPUVpdTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IMM-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IMM-MIB::systemCPUVpdTable' 
Table of the system CPU VPD information.  View as a 
table and not as individual entries for consistent results.
systemCPUVpdEntry row .1.3.6.1.4.1.2.3.51.3.1.5.20.1
System CPU VPD entry. View as a table and not as
individual entries for consistent results.
Indexes
Column Syntax OID
cpuVpdIndexmandatory
System CPU level VPD index. View as a table and not as individual
entries for consistent results.
Integer32
Constraints:
range: 1-1000
 .1.3.6.1.4.1.2.3.51.3.1.5.20.1.1
cpuVpdDescriptionmandatory
System CPU Description. View as a table and not as
individual entries for consistent results.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.5.20.1.2
cpuVpdSpeedmandatory
System cpu speed in MHz. View as a table and not as
individual entries for consistent results.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2.3.51.3.1.5.20.1.3
cpuVpdIdentifiermandatory
System CPU Identifier. View as a table and not as
individual entries for consistent results.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.5.20.1.4
cpuVpdTypemandatory
System cpu Type. View as a table and not as
individual entries for consistent results.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.5.20.1.5
cpuVpdFamilymandatory
System cpu Family. View as a table and not as
individual entries for consistent results.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.5.20.1.6
cpuVpdCoresmandatory
System cpu number of cores. View as a table and not as
individual entries for consistent results.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2.3.51.3.1.5.20.1.7
cpuVpdThreadsmandatory
System cpu number of threads. View as a table and not as
individual entries for consistent results.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2.3.51.3.1.5.20.1.8
cpuVpdVoltagemandatory
System cpu voltage in millivolts (1125 = 1.125 volts).
View as a table and not as individual entries for consistent
results.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2.3.51.3.1.5.20.1.9
cpuVpdDataWidthmandatory
System cpu data width in bits. View as a table and not as
individual entries for consistent results.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2.3.51.3.1.5.20.1.10
cpuVpdHealthStatusmandatory
System cpu health status. View as a table and not as
individual entries for consistent results.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.5.20.1.11
cpuVpdCpuModelmandatory
System cpu model. View as a table and not as
individual entries for consistent results.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.5.20.1.12

systemMemoryVpdTable

table mandatory
.1.3.6.1.4.1.2.3.51.3.1.5.21 · 1 row entry · 10 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk systemMemoryVpdTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IMM-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IMM-MIB::systemMemoryVpdTable' 
Table of the system Memory VPD information.  View as a 
table and not as individual entries for consistent results.
systemMemoryVpdEntry row .1.3.6.1.4.1.2.3.51.3.1.5.21.1
System Memory VPD entry. View as a table and not as
individual entries for consistent results.
Indexes
Column Syntax OID
memoryVpdIndexmandatory
System Memory level VPD index. View as a table and not as individual
entries for consistent results.
Integer32
Constraints:
range: 1-1000
 .1.3.6.1.4.1.2.3.51.3.1.5.21.1.1
memoryVpdDescriptionmandatory
System memory Description (e.g. DIMM 1). View as a table and not as
individual entries for consistent results.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.5.21.1.2
memoryVpdPartNumbermandatory
System Memory Part Number. View as a table and not as
individual entries for consistent results.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.5.21.1.3
memoryVpdFRUSerialNumbermandatory
System memory Serial Number. View as a table and not as
individual entries for consistent results.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.5.21.1.4
memoryVpdManufactureDatemandatory
System memory Manufacture Date in week/year format (e.g. 3609).
View as a table and not as individual entries for consistent
results.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.5.21.1.5
memoryVpdTypemandatory
System memory Type (e.g. DDR III SDRAM). View as a table and not as
individual entries for consistent results.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.5.21.1.6
memoryVpdSizemandatory
System memory size in GigaBytes. View as a table and not as
individual entries for consistent results.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2.3.51.3.1.5.21.1.7
memoryHealthStatusmandatory
A description of the memory component status.
OctetString
Constraints:
range: 0-31
 .1.3.6.1.4.1.2.3.51.3.1.5.21.1.8
memoryConfigSpeedmandatory
System configured memory clock speed in MHz. View as a table and not as
individual entries for consistent results.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2.3.51.3.1.5.21.1.9
memoryRatedSpeedmandatory
System rated memory clock speed in MB/s. View as a table and not as
individual entries for consistent results.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2.3.51.3.1.5.21.1.10

currentlyLoggedInTable

table mandatory
.1.3.6.1.4.1.2.3.51.3.1.6.1.1 · 1 row entry · 3 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk currentlyLoggedInTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IMM-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IMM-MIB::currentlyLoggedInTable' 
Table of IMM users currently logged in.
currentlyLoggedInEntry row .1.3.6.1.4.1.2.3.51.3.1.6.1.1.1
IMM users currently logged in entries.
Indexes
Column Syntax OID
currentlyLoggedInEntryIndexmandatory
Index for IMM users currently logged in.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.2.3.51.3.1.6.1.1.1.1
currentlyLoggedInEntryUserIdmandatory
Name for IMM users currently logged in.
OctetString
Constraints:
range: 0-64
 .1.3.6.1.4.1.2.3.51.3.1.6.1.1.1.2
currentlyLoggedInEntryAccMethodmandatory
Access method for IMM users currently logged in.
OctetString
Constraints:
range: 0-64
 .1.3.6.1.4.1.2.3.51.3.1.6.1.1.1.3

allLEDsTable

table mandatory
.1.3.6.1.4.1.2.3.51.3.1.8.2 · 1 row entry · 5 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk allLEDsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IMM-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IMM-MIB::allLEDsTable' 
Table of LEDs detailed information.
allLEDsEntry row .1.3.6.1.4.1.2.3.51.3.1.8.2.1
LEDs Details entry
Indexes
Column Syntax OID
ledIndexmandatory
The LED index number.
For consistent results, view as a table and not as individual entries.
Integer32
Constraints:
range: 1-1000
 .1.3.6.1.4.1.2.3.51.3.1.8.2.1.1
ledIdentifiermandatory
The unique identifier for this LED
For consistent results, view as a table and not as individual entries.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2.3.51.3.1.8.2.1.2
ledLabelmandatory
Text label for a LED.
For consistent results, view as a table and not as individual entries.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.8.2.1.4
ledStatemandatory
Text description which denotes color or on/off/blink state for a LED.
For consistent results, view as a table and not as individual entries.
Enumeration
Enumerated Values:
0off
1on
2blinking
 .1.3.6.1.4.1.2.3.51.3.1.8.2.1.5
ledColormandatory
Color of this LED.
For consistent results, view as a table and not as individual entries.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.8.2.1.6

powerPolicyTable

table mandatory
.1.3.6.1.4.1.2.3.51.3.1.10.2.1 · 1 row entry · 6 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk powerPolicyTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IMM-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IMM-MIB::powerPolicyTable' 
Table of Power Policy information for all power domains. Reading this
table information about the available power policies that can be
configured and which is currently selected. The powerPolicyActivate 
object can also be SET to select which policy should be active.
powerPolicyEntry row .1.3.6.1.4.1.2.3.51.3.1.10.2.1.1
Power Policy Entry
Indexes
Column Syntax OID
powerPolicyIndexmandatory
The unique idenitifier of a row in the powerPolicyTable.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2.3.51.3.1.10.2.1.1.1
powerPolicyNamemandatory
The short name of the power policy. The following are the possible
names and their detailed description:

Power Module Redundancy
Intended for a single AC power source into the chassis
where e…
OctetString .1.3.6.1.4.1.2.3.51.3.1.10.2.1.1.2
powerPolicyPwrSupplyFailureLimitmandatory
The maximum number of power supplies that can fail in a chassis
while still providing redundancy.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2.3.51.3.1.10.2.1.1.3
powerPolicyMaxPowerLimitmandatory
The maximum power available (in watts), based on the number of power modules and
the Power Management Policy setting.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2.3.51.3.1.10.2.1.1.4
powerPolicyEstimatedUtilizationmandatory
The estimated utilization (as a percentage) based on current power usage.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2.3.51.3.1.10.2.1.1.5
powerPolicyActivatemandatory
When read, this object provides the status of this power policy. If the
value is enabled(1), it means this is the active power policy for the
associated domain. When set to a value of enabled(1), the power policy
will b…
Enumerationr/w
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.2.3.51.3.1.10.2.1.1.6

powerTrendingSampleTable

table mandatory
.1.3.6.1.4.1.2.3.51.3.1.10.3.3 · 1 row entry · 5 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk powerTrendingSampleTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IMM-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IMM-MIB::powerTrendingSampleTable' 
Table of Power Domain 1 Power Trending Information.
powerTrendingSampleEntry row .1.3.6.1.4.1.2.3.51.3.1.10.3.3.1
Power Domain 1 Power Trending Sample entry.
Indexes
Column Syntax OID
powerTrendingSampleIndexmandatory
Power Trending Sample Table Index.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2.3.51.3.1.10.3.3.1.1
powerTrendingSampleTimeStampmandatory
Power Trending Sample Table Timestamp.
OctetString .1.3.6.1.4.1.2.3.51.3.1.10.3.3.1.2
powerTrendingSampleAvemandatory
Power Trending Table Average Power.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2.3.51.3.1.10.3.3.1.3
powerTrendingSampleMinmandatory
Power Trending Table Minimum Power.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2.3.51.3.1.10.3.3.1.4
powerTrendingSampleMaxmandatory
Power Trending Table Maximum Power.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2.3.51.3.1.10.3.3.1.5

powerTable

table mandatory
.1.3.6.1.4.1.2.3.51.3.1.11.2 · 1 row entry · 6 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk powerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IMM-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IMM-MIB::powerTable' 
This table contains power inventory information.
powerEntry row .1.3.6.1.4.1.2.3.51.3.1.11.2.1
Each row contains parameters related to a power module inventory channel.
Indexes
Column Syntax OID
powerIndexmandatory
This column is used to identify a particular power module inventory channel.
Integer32
Constraints:
range: 0-100
 .1.3.6.1.4.1.2.3.51.3.1.11.2.1.1
powerFruNamemandatory
power module FRU name.
OctetString
Constraints:
range: 0-31
 .1.3.6.1.4.1.2.3.51.3.1.11.2.1.2
powerPartNumbermandatory
power module Part Number. View as a table and not as individual entries for consistent results.
OctetString
Constraints:
range: 0-31
 .1.3.6.1.4.1.2.3.51.3.1.11.2.1.3
powerFRUNumbermandatory
power module FRU Number. View as a table and not as individual entries for consistent results.
OctetString
Constraints:
range: 0-31
 .1.3.6.1.4.1.2.3.51.3.1.11.2.1.4
powerFRUSerialNumbermandatory
power module Serial Number. View as a table and not as individual entries for consistent results.
OctetString
Constraints:
range: 0-31
 .1.3.6.1.4.1.2.3.51.3.1.11.2.1.5
powerHealthStatusmandatory
A description of the power module status.
OctetString
Constraints:
range: 0-31
 .1.3.6.1.4.1.2.3.51.3.1.11.2.1.6

diskTable

table mandatory
.1.3.6.1.4.1.2.3.51.3.1.12.2 · 1 row entry · 3 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk diskTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IMM-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IMM-MIB::diskTable' 
This table contains disk inventory information.
diskEntry row .1.3.6.1.4.1.2.3.51.3.1.12.2.1
Each row contains parameters related to a disk module inventory channel.
Indexes
Column Syntax OID
diskIndexmandatory
This column is used to identify a particular
disk module inventory channel.
Integer32
Constraints:
range: 0-100
 .1.3.6.1.4.1.2.3.51.3.1.12.2.1.1
diskFruNamemandatory
disk module FRU name.
OctetString
Constraints:
range: 0-31
 .1.3.6.1.4.1.2.3.51.3.1.12.2.1.2
diskHealthStatusmandatory
A description of the disk module status.
OctetString
Constraints:
range: 0-31
 .1.3.6.1.4.1.2.3.51.3.1.12.2.1.3

raidControllerTable

table mandatory
.1.3.6.1.4.1.2.3.51.3.1.13.1.2 · 1 row entry · 38 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk raidControllerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IMM-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IMM-MIB::raidControllerTable' 
Table of Local Storage RAID Controller information.
raidControllerEntry row .1.3.6.1.4.1.2.3.51.3.1.13.1.2.1
RAID Controller Entry.
Indexes
Column Syntax OID
raidCtrlIndexmandatory
This column is used to identify a particular RAID controller.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2.3.51.3.1.13.1.2.1.1
raidCtrlNamemandatory
This column is used to offer a name of one RAID controller.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.13.1.2.1.2
raidCtrlVPDProdNamemandatory
The Product Name of a particular RAID controller.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.13.1.2.1.3
raidCtrlFWPkgVersionmandatory
The Firmware Package Version of a particular RAID controller.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.13.1.2.1.4
raidCtrlBatBCKmandatory
Whether Battery Backup of a particular RAID controller is installed.
Enumeration
Enumerated Values:
0uninstalled
1installed
 .1.3.6.1.4.1.2.3.51.3.1.13.1.2.1.5
raidCtrlVPDManufacturemandatory
The Manufacture of a particular RAID controller.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.13.1.2.1.6
raidCtrlVPDUUIDmandatory
The Device ID (UUID) of a particular RAID controller.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.13.1.2.1.7
raidCtrlVPDMachineTypemandatory
The Model Type/Model of a particular RAID controller.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.13.1.2.1.8
raidCtrlVPDModelmandatory
The Model Type/Model of a particular RAID controller.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.13.1.2.1.9
raidCtrlVPDSerialNomandatory
The Serial Number of a particular RAID controller.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.13.1.2.1.10
raidCtrlVPDFRUNomandatory
The FRU Number of a particular RAID controller.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.13.1.2.1.11
raidCtrlVPDPartNomandatory
The Part Number of a particular RAID controller.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.13.1.2.1.12
raidCtrlCacheMdlStatusmandatory
The Cache Model Status of a particular RAID controller.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.13.1.2.1.13
raidCtrlCacheMdlMemSizemandatory
The Cache Model Memory Size of a particular RAID controller.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.13.1.2.1.14
raidCtrlCacheMdlSerialNomandatory
The Cache Model Serial Number of a particular RAID controller.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.13.1.2.1.15
raidCtrlPCISlotNomandatory
The PCI Slot Number of a particular RAID controller.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2.3.51.3.1.13.1.2.1.16
raidCtrlPCIBusNomandatory
The PCI Bus Number of a particular RAID controller.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2.3.51.3.1.13.1.2.1.17
raidCtrlPCIDevNomandatory
The PCI Device Number of a particular RAID controller.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2.3.51.3.1.13.1.2.1.18
raidCtrlPCIFuncNomandatory
The PCI Function Number of a particular RAID controller.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2.3.51.3.1.13.1.2.1.19
raidCtrlPCIDevIDmandatory
The PCI Device ID of a particular RAID controller.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.13.1.2.1.20
raidCtrlPCISubDevIDmandatory
The PCI Subsystem Device ID of a particular RAID controller.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.13.1.2.1.21
raidCtrlBatBCKProdNamemandatory
The Product Name of Battery Backup of a particular RAID controller.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.13.1.2.1.22
raidCtrlBatBCKManufacturemandatory
The Manufacture of Battery Backup of a particular RAID controller.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.13.1.2.1.23
raidCtrlBatBCKStatusmandatory
The Status of Battery Backup of a particular RAID controller.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.13.1.2.1.24
raidCtrlBatBCKTypemandatory
The Battery Type of Battery Backup of a particular RAID controller.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.13.1.2.1.25
raidCtrlBatBCKChemmandatory
The Chemistry of Battery Backup of a particular RAID controller.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.13.1.2.1.26
raidCtrlBatBCKSerialNomandatory
The Serial Number of Battery Backup of a particular RAID controller.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.13.1.2.1.27
raidCtrlBatBCKChgCapmandatory
The Charge Capacity of Battery Backup of a particular RAID controller.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.13.1.2.1.28
raidCtrlBatBCKFirmwaremandatory
The Firmware Info of Battery Backup of a particular RAID controller.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.13.1.2.1.29
raidCtrlBatBCKDgnVoltagemandatory
The Designed Voltage of Battery Backup of a particular RAID controller.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.13.1.2.1.30
raidCtrlBatBCKVoltagemandatory
The Voltage of Battery Backup of a particular RAID controller.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.13.1.2.1.31
raidCtrlBatCurrentmandatory
The Current of Battery Backup of a particular RAID controller.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.13.1.2.1.32
raidCtrlBatBCKDgnChgCapmandatory
The Design Charge Capacity of Battery Backup of a particular RAID controller.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.13.1.2.1.33
raidCtrlBatBCKCrtTempmandatory
The Current degree Celsius temperature of Battery Backup of a particular RAID controller.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.13.1.2.1.34
raidCtrlFWNamesmandatory
All the Firmware Names of a particular RAID controller.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.13.1.2.1.35
raidCtrlPortDetailsmandatory
All the Port Details of a particular RAID controller, including Port Address and Port Controller Type.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.13.1.2.1.36
raidCtrlStoragepoolsmandatory
The storage pools list of a particular RAID controller.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.13.1.2.1.37
raidCtrlDrivesmandatory
The Physical drives list of a particular RAID controller.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.13.1.2.1.38

raidDriveTable

table mandatory
.1.3.6.1.4.1.2.3.51.3.1.13.1.3 · 1 row entry · 25 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk raidDriveTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IMM-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IMM-MIB::raidDriveTable' 
Table of Logic Storage RAID Drive information.
raidDriveEntry row .1.3.6.1.4.1.2.3.51.3.1.13.1.3.1
RAID Drive Entry.
Indexes
Column Syntax OID
raidDriveIndexmandatory
This column is used to identify a particular RAID drive.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2.3.51.3.1.13.1.3.1.1
raidDriveNamemandatory
A particular drive name.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.13.1.3.1.2
raidDriveVPDProdNamemandatory
The Product Name of a particular RAID drive.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.13.1.3.1.3
raidDriveStatemandatory
The State of a particular RAID drive.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.13.1.3.1.4
raidDriveSlotNomandatory
The Slot No. of a particular RAID drive.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2.3.51.3.1.13.1.3.1.5
raidDriveDeviceIDmandatory
The Device ID of a particular RAID drive.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.13.1.3.1.6
raidDriveDiskTypemandatory
The Disk Type of a particular RAID drive.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.13.1.3.1.7
raidDriveMediaTypemandatory
The Media Type of a particular RAID drive.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.13.1.3.1.8
raidDriveSpeedmandatory
The Speed of a particular RAID drive.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.13.1.3.1.9
raidDriveCurTempmandatory
The Current degree Celsius temperature of a particular RAID drive.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.13.1.3.1.10
raidDriveHealthStatausmandatory
The Health Status of a particular RAID drive.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.13.1.3.1.11
raidDriveCapacitymandatory
The Capacity of a particular RAID drive.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.13.1.3.1.12
raidDriveVPDManufacturemandatory
The Manufacture of a particular RAID drive.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.13.1.3.1.13
raidDriveEnclosureIDmandatory
The Enclosure ID of a particular RAID drive.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.13.1.3.1.14
raidDriveVPDMachineTypemandatory
The Machine type of a particular RAID drive.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.13.1.3.1.15
raidDriveVPDModelmandatory
The Model of a particular RAID drive.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.13.1.3.1.16
raidDriveVPDSerialNomandatory
The Serial No. of a particular RAID drive.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.13.1.3.1.17
raidDriveVPDFRUNomandatory
The FRU No. of a particular RAID drive.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.13.1.3.1.18
raidDriveVPDPartNomandatory
The Part No. of a particular RAID drive.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.13.1.3.1.19
raidDriveFWNamesmandatory
All the Firmware Names of a particular RAID drive.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.13.1.3.1.20
raidDriveRotationRatemandatory
The Rotation Rate of a particular RAID drive.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.13.1.3.1.21
raidDriveMediaErrCntmandatory
The Media Error Count of a particular RAID drive.
RFC1155-SMIGauge
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2.3.51.3.1.13.1.3.1.22
raidDriveOtherErrCntmandatory
The Other Error Count of a particular RAID drive.
RFC1155-SMIGauge
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2.3.51.3.1.13.1.3.1.23
raidDrivePredFailCntmandatory
The Predication Fail Count of a particular RAID drive.
RFC1155-SMIGauge
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2.3.51.3.1.13.1.3.1.24
raidDriveRemainingLifemandatory
The Remaining life of a particular RAID drive. It is available only for SSD Drive.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.13.1.3.1.25

raidControllerFirmwareTable

table mandatory
.1.3.6.1.4.1.2.3.51.3.1.13.1.4 · 1 row entry · 7 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk raidControllerFirmwareTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IMM-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IMM-MIB::raidControllerFirmwareTable' 
Table of Logic Storage RAID Controller Firmware information.
raidControllerFirmwareEntry row .1.3.6.1.4.1.2.3.51.3.1.13.1.4.1
RAID Firmware Entry.
Indexes
Column Syntax OID
raidControllerFirmwareIndexmandatory
This column is used to identify a particular RAID Controller firmware.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2.3.51.3.1.13.1.4.1.1
raidControllerFirmwareNamemandatory
The Name of a particular RAID Controller firmware.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.13.1.4.1.2
raidControllerFirmwareCtrlNamemandatory
The controller name of the firmwares.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.13.1.4.1.3
raidControllerFirmwareDescriptionmandatory
The Description of a particular RAID Controller firmware.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.13.1.4.1.4
raidControllerFirmwareManufacturemandatory
The Manufacture of a particular RAID Controller firmware.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.13.1.4.1.5
raidControllerFirmwareVersionmandatory
The Version of a particular RAID Controller firmware.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.13.1.4.1.6
raidControllerFirmwareReleaseDatemandatory
The Release Date of a particular RAID Controller firmware.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.13.1.4.1.7

raidDriveFirmwareTable

table mandatory
.1.3.6.1.4.1.2.3.51.3.1.13.1.5 · 1 row entry · 7 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk raidDriveFirmwareTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IMM-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IMM-MIB::raidDriveFirmwareTable' 
Table of Logic Storage RAID Drive Firmware information.
raidDriveFirmwareEntry row .1.3.6.1.4.1.2.3.51.3.1.13.1.5.1
RAID Drive Firmware Entry.
Indexes
Column Syntax OID
raidDriveFirmwareIndexmandatory
This column is used to identify a particular RAID Drive firmware.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2.3.51.3.1.13.1.5.1.1
raidDriveFirmwareNamemandatory
The Name of a particular RAID Drive firmware.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.13.1.5.1.2
raidDriveFirmwareDriveNamemandatory
The drive name of the firmwares.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.13.1.5.1.3
raidDriveFirmwareDescriptionmandatory
The Description of a particular RAID Drive firmware.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.13.1.5.1.4
raidDriveFirmwareManufacturemandatory
The Manufacture of a particular RAID Drive firmware.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.13.1.5.1.5
raidDriveFirmwareVersionmandatory
The Version of a particular RAID Drive firmware.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.13.1.5.1.6
raidDriveFirmwareReleaseDatemandatory
The Release Date of a particular RAID Drive firmware.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.13.1.5.1.7

raidStoragepoolTable

table mandatory
.1.3.6.1.4.1.2.3.51.3.1.13.1.6 · 1 row entry · 7 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk raidStoragepoolTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IMM-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IMM-MIB::raidStoragepoolTable' 
Table of Logic Storage RAID Storagepool information.
raidStoragepoolEntry row .1.3.6.1.4.1.2.3.51.3.1.13.1.6.1
RAID Storagepool Entry.
Indexes
Column Syntax OID
raidStoragepoolIndexmandatory
This column is used to identify a particular RAID storagepool.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2.3.51.3.1.13.1.6.1.1
raidStoragepoolNamemandatory
The name of a particular RAID storagepool.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.13.1.6.1.2
raidStoragepoolControllerNamemandatory
The controller name of the storagepool.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.13.1.6.1.3
raidStoragepoolStatemandatory
The RAID State of a particular RAID storagepool.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.13.1.6.1.4
raidStoragepoolCapacitymandatory
The Capacity of a particular RAID storagepool, including total capacity and free capacity.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.13.1.6.1.5
raidStoragepoolVolsmandatory
The volumes list of a particular RAID storagepool.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.13.1.6.1.6
raidStoragepoolDrivesmandatory
The physical drives list of a particular RAID storagepool.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.13.1.6.1.7

raidVolumeTable

table mandatory
.1.3.6.1.4.1.2.3.51.3.1.13.1.7 · 1 row entry · 7 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk raidVolumeTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IMM-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IMM-MIB::raidVolumeTable' 
Table of Logic Storage RAID Volume information.
raidVolumeEntry row .1.3.6.1.4.1.2.3.51.3.1.13.1.7.1
RAID Volume Entry.
Indexes
Column Syntax OID
raidVolumeIndexmandatory
This column is used to identify a particular RAID volume.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2.3.51.3.1.13.1.7.1.1
raidVolumeNamemandatory
The Name of a particular RAID volume.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.13.1.7.1.2
raidVolumeControllerNamemandatory
The controller name of the volume.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.13.1.7.1.3
raidVolumeStatusmandatory
The Status of a particular RAID volume.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.13.1.7.1.4
raidVolumeCapacitymandatory
The Capacity of a particular RAID volume.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.13.1.7.1.5
raidVolumeStripSizemandatory
The strip size of the RAID volume.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.13.1.7.1.6
raidVolumeBootablemandatory
Whether the RAID volume is bootable.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.13.1.7.1.7

fdTable

table mandatory
.1.3.6.1.4.1.2.3.51.3.1.13.2.2 · 1 row entry · 13 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk fdTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IMM-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IMM-MIB::fdTable' 
This table contains flashdimm inventory information.
fdEntry row .1.3.6.1.4.1.2.3.51.3.1.13.2.2.1
Each row contains parameters related to a flashdimm module inventory channel.
Indexes
Column Syntax OID
fdIndexmandatory
This column is used to identify a particular
flashdimm module inventory channel.
Integer32
Constraints:
range: 1-100
 .1.3.6.1.4.1.2.3.51.3.1.13.2.2.1.1
fdFruNamemandatory
flashdimm module FRU name.
OctetString
Constraints:
range: 0-31
 .1.3.6.1.4.1.2.3.51.3.1.13.2.2.1.2
fdHealthStatusmandatory
A description of the flashdimm module health status.
OctetString
Constraints:
range: 0-31
 .1.3.6.1.4.1.2.3.51.3.1.13.2.2.1.3
fdOpStatemandatory
A description of the flashdimm module operation status.
OctetString
Constraints:
range: 0-31
 .1.3.6.1.4.1.2.3.51.3.1.13.2.2.1.4
fdCapacitymandatory
A description of the flashdimm module capacity.
OctetString
Constraints:
range: 0-31
 .1.3.6.1.4.1.2.3.51.3.1.13.2.2.1.5
fdModelTypemandatory
A description of the flashdimm module type.
OctetString
Constraints:
range: 0-31
 .1.3.6.1.4.1.2.3.51.3.1.13.2.2.1.6
fdPartNummandatory
A description of the flashdimm module part number.
OctetString
Constraints:
range: 0-31
 .1.3.6.1.4.1.2.3.51.3.1.13.2.2.1.7
fdFruSerialNummandatory
A description of the flashdimm module serial number.
OctetString
Constraints:
range: 0-31
 .1.3.6.1.4.1.2.3.51.3.1.13.2.2.1.8
fdManufIDmandatory
A description of the flashdimm module manufacture id.
OctetString
Constraints:
range: 0-31
 .1.3.6.1.4.1.2.3.51.3.1.13.2.2.1.9
fdTempmandatory
A description of the flashdimm module temperature.
OctetString
Constraints:
range: 0-31
 .1.3.6.1.4.1.2.3.51.3.1.13.2.2.1.10
fdWarrWritesmandatory
A description of the flashdimm module warranty writes.
OctetString
Constraints:
range: 0-31
 .1.3.6.1.4.1.2.3.51.3.1.13.2.2.1.11
fdWriteEndurancemandatory
A description of the flashdimm module write endurance.
OctetString
Constraints:
range: 0-31
 .1.3.6.1.4.1.2.3.51.3.1.13.2.2.1.12
fdFwLevelmandatory
A description of the flashdimm module status.
OctetString
Constraints:
range: 0-31
 .1.3.6.1.4.1.2.3.51.3.1.13.2.2.1.13

adapterGenericTable

table mandatory
.1.3.6.1.4.1.2.3.51.3.1.14.2 · 1 row entry · 5 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk adapterGenericTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IMM-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IMM-MIB::adapterGenericTable' 
Table of all adapters generic information
adapterGenericEntry row .1.3.6.1.4.1.2.3.51.3.1.14.2.1
Adapters generic information entry.
Indexes
Column Syntax OID
adapterGenericIndexmandatory
This column is used to identify a particular PCI adapter.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2.3.51.3.1.14.2.1.1
adapterGenericVPDProdNamemandatory
The Product Name of a particular PCI adapter. And if the Product Name contains PFA, PFA is in HEX.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.14.2.1.2
adapterGenericSlotNomandatory
This Slot No. of a particular PCI adapter
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2.3.51.3.1.14.2.1.3
adapterGenericLocationmandatory
The Location of a particular PCI adapter.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.14.2.1.4
adapterGenericCardInterfacemandatory
The Card Interface of a particular PCI adapter.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.14.2.1.5

adapterNetworkFunctionTable

table mandatory
.1.3.6.1.4.1.2.3.51.3.1.14.3 · 1 row entry · 26 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk adapterNetworkFunctionTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IMM-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IMM-MIB::adapterNetworkFunctionTable' 
Table of Network Function information.
adapterNetworkFunctionEntry row .1.3.6.1.4.1.2.3.51.3.1.14.3.1
Network function information entry.
Indexes
Column Syntax OID
adapterNetworkFunctionIndexmandatory
This column is used to identify a particular network function.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2.3.51.3.1.14.3.1.1
adapterNetworkFunctionNetworkVPDProdNamemandatory
The Product Name and PFA of a particular network function and PFA is in HEX.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.14.3.1.2
adapterNetworkFunctionAdapterVPDProdNamemandatory
The Product Name of a particular adapter providing this function. And if the Product Name contains PFA, PFA is in HEX.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.14.3.1.3
adapterNetworkFunctionNetworkVPDManufacturermandatory
The Manufacturer of a particular network function.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.14.3.1.4
adapterNetworkFunctionNetworkVPDUUIDmandatory
The UUID of a particular network function.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.14.3.1.5
adapterNetworkFunctionNetworkVPDModelmandatory
The Model of a particular network function.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.14.3.1.6
adapterNetworkFunctionNetworkVPDSerialNomandatory
The Serial No. of a particular network function.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.14.3.1.7
adapterNetworkFunctionNetworkVPDFRUNomandatory
The FRU No. of a particular network function.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.14.3.1.8
adapterNetworkFunctionNetworkVPDPartNomandatory
The Part No. of a particular network function.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.14.3.1.9
adapterNetworkFunctionFoDUIDmandatory
The FoD UID of a particular network function.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.14.3.1.10
adapterNetworkFunctionSupportHotPlugmandatory
Indicates whether the network function supports hot plug.
Enumeration
Enumerated Values:
0false
1true
 .1.3.6.1.4.1.2.3.51.3.1.14.3.1.11
adapterNetworkFunctionPhysicalPortNumbermandatory
The Physical Port Number of a particular network function.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2.3.51.3.1.14.3.1.12
adapterNetworkFunctionMaxPortNumbermandatory
The Max Port Number of a particular network function.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2.3.51.3.1.14.3.1.13
adapterNetworkFunctionPortNumbermandatory
The Port Number of a particular network function.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2.3.51.3.1.14.3.1.14
adapterNetworkFunctionMaxDataWidthmandatory
The Maximum Data Width in Gbps of a particular network funtion.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2.3.51.3.1.14.3.1.15
adapterNetworkFunctionPackageTypemandatory
The Package Type of a particular network function.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.14.3.1.16
adapterNetworkFunctionPCIBusNomandatory
The PCI Bus No. of a particular network function.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2.3.51.3.1.14.3.1.17
adapterNetworkFunctionPCIDevNomandatory
The PCI Device No. of a particular network function.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2.3.51.3.1.14.3.1.18
adapterNetworkFunctionPCIFuncNomandatory
The PCI Function No. of a particular network function.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2.3.51.3.1.14.3.1.19
adapterNetworkFunctionPCIVendorIdmandatory
The PCI Vendor ID of a particular network function.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.14.3.1.20
adapterNetworkFunctionPCIDevIdmandatory
The PCI Device ID of a particular network function.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.14.3.1.21
adapterNetworkFunctionPCIDevTypemandatory
The PCI Device Type of a particular network function.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.14.3.1.22
adapterNetworkFunctionPCIRevIdmandatory
The PCI Revision ID of a particular network function.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.14.3.1.23
adapterNetworkFunctionPCISubVendorIdmandatory
The PCI Subsystem Vendor ID of a particular network function.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.14.3.1.24
adapterNetworkFunctionPCISubDevIdmandatory
The PCI Subsystem Device ID of a particular network function.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.14.3.1.25
adapterNetworkFunctionPCISlotDesignationmandatory
The PCI Slot Designation of a particular network function.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.14.3.1.26

adapterNetworkPortTable

table mandatory
.1.3.6.1.4.1.2.3.51.3.1.14.4 · 1 row entry · 21 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk adapterNetworkPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IMM-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IMM-MIB::adapterNetworkPortTable' 
Table of Ports of Network Function information.
adapterNetworkPortEntry row .1.3.6.1.4.1.2.3.51.3.1.14.4.1
Ports of Network Function information entry.
Indexes
Column Syntax OID
adapterNetworkPortIndexmandatory
This column is used to identify a particular network port.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2.3.51.3.1.14.4.1.1
adapterNetworkPortNetworkVPDProdNamemandatory
The Product Name and PFA of the network function for this port and PFA is in HEX.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.14.4.1.2
adapterNetworkPortPhyPortNomandatory
The Physical Port No. in the network function for this port.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2.3.51.3.1.14.4.1.3
adapterNetworkPortPhyPortConnectormandatory
The Physical Port Connector Layout in the network function for this port.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.14.4.1.4
adapterNetworkPortPhyPortBurnedinAddressmandatory
The Physical Permanent (burned-In) Address of a particular network port.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.14.4.1.5
adapterNetworkPortNomandatory
The Port No. of this network port in the network function.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2.3.51.3.1.14.4.1.6
adapterNetworkPortMaxDataSizemandatory
The Port Max Data Size of this network port in the network function.
RFC1155-SMIGauge
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2.3.51.3.1.14.4.1.7
adapterNetworkPortPermanentAddressmandatory
The Permanent Address of a particular network port.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.14.4.1.8
adapterNetworkPortNetworkAddressmandatory
The Network Address of a particular network port.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.14.4.1.9
adapterNetworkPortLinkTechnologymandatory
The Link Technology of a particular network port.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.14.4.1.10
adapterNetworkPortvNICModemandatory
If the logical port vNIC mode is Virtual Fabric mode, Switch Independent mode,
or Unified Fabric Protocol mode, this column returns 1(enabled), otherwise, the columen
returns 0(disabled)
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.14.4.1.11
adapterNetworkPortMaxSpeedmandatory
The Maximum Bandwidth in Gbps of a particular network port.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.14.4.1.12
adapterNetworkPortProtocolTypemandatory
The Protocol Type of a particular network port.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.14.4.1.13
adapterNetworkPortCurrentProtocolmandatory
The Current Work Protocol of a particular network port.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.14.4.1.14
adapterNetworkPortFCoEPermanentAddressmandatory
The FCoE Permanent Address of a particular network port.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.14.4.1.15
adapterNetworkPortFCoENetworkAddressmandatory
The FCoE Network Address of a particular network port.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.14.4.1.16
adapterNetworkPortConnectionTypemandatory
The Connection Type of a particular network port if its current work protocol is FC or FCoE.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.14.4.1.17
adapterNetworkPortRolemandatory
The Port Role of a particular network port if its current work protocol is FC or FCoE.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.14.4.1.18
adapterNetworkPortTargetRelativePortNomandatory
The Target Relative Port No. of a particular network port if its current work protocol is FC or FCoE.
RFC1155-SMIGauge
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2.3.51.3.1.14.4.1.19
adapterNetworkPortPhyPortLinkStatusmandatory
The Physical Port Link Status in the network function for this port.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.14.4.1.20
adapterNetworkPortPhyPortLinkSpeedmandatory
The Physical Port Link Speed in the network function for this port.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.14.4.1.21

adapterGPUFunctionTable

table mandatory
.1.3.6.1.4.1.2.3.51.3.1.14.5 · 1 row entry · 26 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk adapterGPUFunctionTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IMM-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IMM-MIB::adapterGPUFunctionTable' 
Table of GPU Function information.
adapterGPUFunctionEntry row .1.3.6.1.4.1.2.3.51.3.1.14.5.1
GPU function information entry.
Indexes
Column Syntax OID
adapterGPUFunctionIndexmandatory
This column is used to identify a particular GPU function.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2.3.51.3.1.14.5.1.1
adapterGPUFunctionGpuVPDProdNamemandatory
The Product Name and PFA of a particular GPU function and PFA is in HEX.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.14.5.1.2
adapterGPUFunctionAdapterVPDProdNamemandatory
The Product Name of a particular adapter providing this function. And if the Product Name contains PFA, PFA is in HEX.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.14.5.1.3
adapterGPUFunctionGpuVPDManufacturermandatory
The Manufacturer of a particular GPU function.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.14.5.1.4
adapterGPUFunctionGpuVPDUUIDmandatory
The UUID of a particular GPU function.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.14.5.1.5
adapterGPUFunctionGpuVPDModelmandatory
The Model of a particular GPU function.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.14.5.1.6
adapterGPUFunctionGpuVPDSerialNomandatory
The Serial No. of a particular GPU function.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.14.5.1.7
adapterGPUFunctionGpuVPDFRUNomandatory
The FRU No. of a particular GPU function.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.14.5.1.8
adapterGPUFunctionGpuVPDPartNomandatory
The Part No. of a particular GPU function.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.14.5.1.9
adapterGPUFunctionFoDUIDmandatory
The FoD UID of a particular GPU function.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.14.5.1.10
adapterGPUFunctionSupportHotPlugmandatory
Indicates whether the GPU function supports hot plug.
Enumeration
Enumerated Values:
0false
1true
 .1.3.6.1.4.1.2.3.51.3.1.14.5.1.11
adapterGPUFunctionVideoMemorySizemandatory
The Video Memory Size of a particular GPU function.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.14.5.1.12
adapterGPUFunctionVideoMemoryTypemandatory
The Video Memory Type of a particular GPU function.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.14.5.1.13
adapterGPUFunctionChipNumbermandatory
The Chip Number of a particular GPU function.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2.3.51.3.1.14.5.1.14
adapterGPUFunctionMaxDataWidthmandatory
The Maximum Data Width in Gbps of a particular GPU funtion.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2.3.51.3.1.14.5.1.15
adapterGPUFunctionPackageTypemandatory
The Package Type of a particular GPU function.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.14.5.1.16
adapterGPUFunctionPCIBusNomandatory
The PCI Bus No. of a particular GPU function.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2.3.51.3.1.14.5.1.17
adapterGPUFunctionPCIDevNomandatory
The PCI Device No. of a particular GPU function.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2.3.51.3.1.14.5.1.18
adapterGPUFunctionPCIFuncNomandatory
The PCI Function No. of a particular GPU function.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2.3.51.3.1.14.5.1.19
adapterGPUFunctionPCIVendorIdmandatory
The PCI Vendor ID of a particular GPU function.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.14.5.1.20
adapterGPUFunctionPCIDevIdmandatory
The PCI Device ID of a particular GPU function.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.14.5.1.21
adapterGPUFunctionPCIDevTypemandatory
The PCI Device Type of a particular GPU function.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.14.5.1.22
adapterGPUFunctionPCIRevIdmandatory
The PCI Revision ID of a particular GPU function.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.14.5.1.23
adapterGPUFunctionPCISubVendorIdmandatory
The PCI Subsystem Vendor ID of a particular GPU function.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.14.5.1.24
adapterGPUFunctionPCISubDevIdmandatory
The PCI Subsystem Device ID of a particular GPU function.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.14.5.1.25
adapterGPUFunctionPCISlotDesignationmandatory
The PCI Slot Designation of a particular GPU function.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.14.5.1.26

adapterGPUChipTable

table mandatory
.1.3.6.1.4.1.2.3.51.3.1.14.6 · 1 row entry · 17 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk adapterGPUChipTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IMM-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IMM-MIB::adapterGPUChipTable' 
Table of Chips of GPU Function information.
adapterGPUChipEntry row .1.3.6.1.4.1.2.3.51.3.1.14.6.1
GPU function chip information entry.
Indexes
Column Syntax OID
adapterGPUChipIndexmandatory
This column is used to identify a particular GPU chip
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2.3.51.3.1.14.6.1.1
adapterGPUChipGpuVPDProdNamemandatory
The Product Name and PFA of the GPU function for this chip and PFA is in HEX.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.14.6.1.2
adapterGPUChipNomandatory
The Index of the GPU chip in the GPU adapter.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2.3.51.3.1.14.6.1.3
adapterGPUChipNamemandatory
The Name of a particular GPU chip.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.14.6.1.4
adapterGPUChipFamilymandatory
The Family Name of a particular GPU chip.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.14.6.1.5
adapterGPUChipManufacturermandatory
The Manufacturer of a particular GPU chip.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.14.6.1.6
adapterGPUChipCoresEnabledmandatory
Indicates whether enable cores of a particular GPU chip.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2.3.51.3.1.14.6.1.7
adapterGPUChipMaxClockSpeedmandatory
The Maximum Clock Speed in MHz of a particular GPU chip.
RFC1155-SMIGauge
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2.3.51.3.1.14.6.1.8
adapterGPUChipExtBusClockSpeedmandatory
The External Bus Clock Speed in MHz of a particular GPU chip.
RFC1155-SMIGauge
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2.3.51.3.1.14.6.1.9
adapterGPUChipAddressWidthmandatory
The Address Width of a particular GPU chip.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2.3.51.3.1.14.6.1.10
adapterGPUChipDataWidthmandatory
The Data Width of a particular GPU chip.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2.3.51.3.1.14.6.1.11
adapterGPUChipFormFactormandatory
The Form Factor of a particular GPU chip.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.14.6.1.12
adapterGPUChipModelmandatory
The Model of a particular GPU chip.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.14.6.1.13
adapterGPUChipSerialNomandatory
The Serial No. of a particular GPU chip.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.14.6.1.14
adapterGPUChipFRUNomandatory
The FRU No. of a particular GPU chip.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.14.6.1.15
adapterGPUChipPartNomandatory
The Part No. of a particular GPU chip.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.14.6.1.16
adapterGPUChipUniqueIDmandatory
The Unique ID of a particular GPU chip.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.14.6.1.17

adapterRAIDFunctionTable

table mandatory
.1.3.6.1.4.1.2.3.51.3.1.14.7 · 1 row entry · 23 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk adapterRAIDFunctionTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IMM-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IMM-MIB::adapterRAIDFunctionTable' 
Table of RAID Function information.
adapterRAIDFunctionEntry row .1.3.6.1.4.1.2.3.51.3.1.14.7.1
RAID function information entry.
Indexes
Column Syntax OID
adapterRAIDFunctionIndexmandatory
This column is used to identify a particular RAID function.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2.3.51.3.1.14.7.1.1
adapterRAIDFunctionRaidVPDProdNamemandatory
The Product Name and PFA of a particular RAID function and PFA is in HEX.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.14.7.1.2
adapterRAIDFunctionAdapterVPDProdNamemandatory
The Product Name of a particular adapter providing this function. And if the Product Name contains PFA, PFA is in HEX.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.14.7.1.3
adapterRAIDFunctionRaidVPDManufacturermandatory
The Manufacturer of a particular RAID function.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.14.7.1.4
adapterRAIDFunctionRaidVPDUUIDmandatory
The UUID of a particular RAID function.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.14.7.1.5
adapterRAIDFunctionRaidVPDModelmandatory
The Model of a particular RAID function.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.14.7.1.6
adapterRAIDFunctionRaidVPDSerialNomandatory
The Serial No. of a particular RAID function.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.14.7.1.7
adapterRAIDFunctionRaidVPDFRUNomandatory
The FRU No. of a particular RAID function.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.14.7.1.8
adapterRAIDFunctionRaidVPDPartNomandatory
The Part No. of a particular RAID function.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.14.7.1.9
adapterRAIDFunctionFoDUIDmandatory
The FoD UID of a particular RAID function.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.14.7.1.10
adapterRAIDFunctionSupportHotPlugmandatory
Indicates whether the RAID function supports hot plug.
Enumeration
Enumerated Values:
0false
1true
 .1.3.6.1.4.1.2.3.51.3.1.14.7.1.11
adapterRAIDFunctionMaxDataWidthmandatory
The Maximum Data Width in Gbps of a particular RAID funtion.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2.3.51.3.1.14.7.1.12
adapterRAIDFunctionPackageTypemandatory
The Package Type of a particular RAID function.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.14.7.1.13
adapterRAIDFunctionPCIBusNomandatory
The PCI Bus No. of a particular RAID function.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2.3.51.3.1.14.7.1.14
adapterRAIDFunctionPCIDevNomandatory
The PCI Device No. of a particular RAID function.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2.3.51.3.1.14.7.1.15
adapterRAIDFunctionPCIFuncNomandatory
The PCI Function No. of a particular RAID function.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2.3.51.3.1.14.7.1.16
adapterRAIDFunctionPCIVendorIdmandatory
The PCI Vendor ID of a particular RAID function.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.14.7.1.17
adapterRAIDFunctionPCIDevIdmandatory
The PCI Device ID of a particular RAID function.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.14.7.1.18
adapterRAIDFunctionPCIDevTypemandatory
The PCI Device Type of a particular RAID function.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.14.7.1.19
adapterRAIDFunctionPCIRevIdmandatory
The PCI Revision ID of a particular RAID function.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.14.7.1.20
adapterRAIDFunctionPCISubVendorIdmandatory
The PCI Subsystem Vendor ID of a particular RAID function.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.14.7.1.21
adapterRAIDFunctionPCISubDevIdmandatory
The PCI Subsystem Device ID of a particular RAID function.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.14.7.1.22
adapterRAIDFunctionPCISlotDesignationmandatory
The PCI Slot Designation of a particular RAID function.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.14.7.1.23

adapterFirmwareTable

table mandatory
.1.3.6.1.4.1.2.3.51.3.1.14.8 · 1 row entry · 9 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk adapterFirmwareTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IMM-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IMM-MIB::adapterFirmwareTable' 
Table of PCI Function Firmware information.
adapterFirmwareEntry row .1.3.6.1.4.1.2.3.51.3.1.14.8.1
Adapter Firmware Entry.
Indexes
Column Syntax OID
adapterFwIndexmandatory
This column is used to identify a particular function firmware.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2.3.51.3.1.14.8.1.1
adapterFwFunctionVPDProdNamemandatory
The Product Name and PFA of a particular function for this firmware and PFA is in HEX.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.14.8.1.2
adapterFwNamemandatory
The name of a particular PCI function firmware.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.14.8.1.3
adapterFwClassificationmandatory
The classification of a particular PCI function firmware.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.14.8.1.4
adapterFwDescriptionmandatory
The description of a particular PCI function firmware.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.14.8.1.5
adapterFwManufacturemandatory
The manufacturer of a particular PCI function firmware.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.14.8.1.6
adapterFwVersionmandatory
The version of a particular PCI function firmware.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.14.8.1.7
adapterFwReleaseDatemandatory
The release date of a particular PCI function firmware.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.14.8.1.8
adapterFwSoftwareIDmandatory
The Software ID of a particular PCI function firmware.
RFC1213-MIBDisplayString .1.3.6.1.4.1.2.3.51.3.1.14.8.1.9

eventLogTable

table mandatory
.1.3.6.1.4.1.2.3.51.3.2.1.1 · 1 row entry · 5 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk eventLogTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IMM-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IMM-MIB::eventLogTable' 
Table of event logs.  View as a table and not as individual entries
for consistent results.
eventLogEntry row .1.3.6.1.4.1.2.3.51.3.2.1.1.1
Event log entries. View as a table and not as individual entries for
consistent results.
Indexes
Column Syntax OID
eventLogIndexmandatory
Event log index number. View as a table and not as individual entries for
consistent results.
Integer32
Constraints:
range: 1-1000000
 .1.3.6.1.4.1.2.3.51.3.2.1.1.1.1
eventLogStringmandatory
Contains a string of information to detail the event. View as a table and
not as individual entries for consistent results.
OctetString .1.3.6.1.4.1.2.3.51.3.2.1.1.1.2
eventLogSeveritymandatory
Contains a information to detail the severity of the event. View as a table and
not as individual entries for consistent results.
Enumeration
Enumerated Values:
0error
1warning
2information
3other
 .1.3.6.1.4.1.2.3.51.3.2.1.1.1.3
eventLogDatemandatory
The Date of the Event occured. View as a table and
not as individual entries for consistent results.
OctetString .1.3.6.1.4.1.2.3.51.3.2.1.1.1.4
eventLogTimemandatory
The Time of the Event occured. View as a table and
not as individual entries for consistent results.
OctetString .1.3.6.1.4.1.2.3.51.3.2.1.1.1.5

remoteAlertIdsTable

table mandatory
.1.3.6.1.4.1.2.3.51.3.3.1.3.1 · 1 row entry · 12 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk remoteAlertIdsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IMM-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IMM-MIB::remoteAlertIdsTable' 
Table of remote alert entries.
This table lets you configure remote alert recipients. 
     You can define up to 12 unique recipients.
remoteAlertIdsEntry row .1.3.6.1.4.1.2.3.51.3.3.1.3.1.1
Remote alert entries.
Indexes
Column Syntax OID
remoteAlertIdEntryIndexmandatory
Index for remote alert entry.
Integer32
Constraints:
range: 1-10000
 .1.3.6.1.4.1.2.3.51.3.3.1.3.1.1.1
remoteAlertIdEntryStatusmandatory
If enabled alerts will be sent to this alert
recipient else alerts will not be sent.
Enumerationr/w
Enumerated Values:
1disabled
2enabled
 .1.3.6.1.4.1.2.3.51.3.3.1.3.1.1.2
remoteAlertIdEntryNamemandatory
A null terminated string that contains
a text description of this entry.
OctetStringr/w
Constraints:
range: 0-50
 .1.3.6.1.4.1.2.3.51.3.3.1.3.1.1.3
remoteAlertIdEmailAddrmandatory
A null terminated string that
contains a E-Mail Address. For example 'jeb@us.lenovo.com'.
Used only for a E-mail over Lan.
OctetStringr/w
Constraints:
range: 0-320
 .1.3.6.1.4.1.2.3.51.3.3.1.3.1.1.4
remoteAlertIdEntryCriticalAlertmandatory
If Enabled,criticalAlerts will be sent to this
remote alert receipient,else critical alerts will not be sent.
Enumerationr/w
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.2.3.51.3.3.1.3.1.1.5
remoteAlertIdEntryWarningAlertmandatory
If Enabled,warningAlerts will be sent to this
remote alert receipient,else warningAlerts will not be sent.
Enumerationr/w
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.2.3.51.3.3.1.3.1.1.6
remoteAlertIdEntrySystemAlertmandatory
If Enabled,systemAlerts will be sent to this
remote alert receipient,else systemAlerts will not be sent.
Enumerationr/w
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.2.3.51.3.3.1.3.1.1.7
remoteAlertIdEntryAuditAlertmandatory
If Enabled,systemAlerts will be sent to this
remote alert receipient,else systemAlerts will not be sent.
Enumerationr/w
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.2.3.51.3.3.1.3.1.1.8
remoteAlertIdEntryAttachmentsToEmailAlertsmandatory
Indicates if the event log should be attached to
a email alert.
Enumerationr/w
Enumerated Values:
0noAttachments
1attachEventLog
 .1.3.6.1.4.1.2.3.51.3.3.1.3.1.1.9
remoteAlertIdEntrySyslogPortAssignmentmandatory
Syslog port number.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2.3.51.3.3.1.3.1.1.10
remoteAlertIdEntrySyslogHostnamemandatory
Syslog hostname or IP address.
OctetStringr/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.2.3.51.3.3.1.3.1.1.11
remoteAlertIdEntryTypemandatory
Alert recipient type.
Enumerationr/w
Enumerated Values:
1email
2syslog
 .1.3.6.1.4.1.2.3.51.3.3.1.3.1.1.12

remoteAlertFiltersTable

table mandatory
.1.3.6.1.4.1.2.3.51.3.3.1.3.2 · 1 row entry · 29 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk remoteAlertFiltersTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IMM-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IMM-MIB::remoteAlertFiltersTable' 
Table of Alert Filters.  The  entries (rows) in this table correspond 1-1 with the entries in the 
remoteAlertIdsTable.  They are correlated by index.
remoteAlertFiltersEntry row .1.3.6.1.4.1.2.3.51.3.3.1.3.2.1
Remote Filters entries.
Indexes
Column Syntax OID
rafIndexmandatory
Index for User Authority Level entry.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.2.3.51.3.3.1.3.2.1.1
rafSpTrapTempCmandatory
Critical Alert: Temperature threshold exceeded.
Enumerationr/w
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.2.3.51.3.3.1.3.2.1.2
rafSpTrapVoltCmandatory
Critical Alert: Voltage threshold exceeded.
Enumerationr/w
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.2.3.51.3.3.1.3.2.1.3
rafSpTrapPowerCmandatory
Critical Alert: Power failure.
Enumerationr/w
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.2.3.51.3.3.1.3.2.1.4
rafSpTrapHdCmandatory
Critical Alert: Hard disk drive failure.
Enumerationr/w
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.2.3.51.3.3.1.3.2.1.5
rafSpTrapFanCmandatory
Critical Alert: Single Fan failure.
Enumerationr/w
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.2.3.51.3.3.1.3.2.1.6
rafSpTrapIhcCmandatory
Critical Alert: Incompatible hardware configuration.
Enumerationr/w
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.2.3.51.3.3.1.3.2.1.7
rafSpTrapCPUCmandatory
Critical Alert: CPU Error.
Enumerationr/w
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.2.3.51.3.3.1.3.2.1.8
rafSpTrapMemoryCmandatory
Critical Alert: Memory Error.
Enumerationr/w
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.2.3.51.3.3.1.3.2.1.9
rafSpTrapRdpsCmandatory
Critical Alert: Redundant Power Supply failure.
Enumerationr/w
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.2.3.51.3.3.1.3.2.1.10
rafSpTrapHardwareCmandatory
Critical Alert: Other Failure - refer to Message ID for specific condition.
Enumerationr/w
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.2.3.51.3.3.1.3.2.1.11
rafSpTrapRdpsNmandatory
Non-Critical Alert: Redundant Power Supply failure.
Enumerationr/w
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.2.3.51.3.3.1.3.2.1.12
rafSpTrapTempNmandatory
Non-Critical Alert: Temperature threshold exceeded.
Enumerationr/w
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.2.3.51.3.3.1.3.2.1.13
rafSpTrapVoltNmandatory
Non-Critical Alert: Voltage threshold exceeded.
Enumerationr/w
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.2.3.51.3.3.1.3.2.1.14
rafSpTrapPowerNmandatory
Non-Critical Alert: Power.
Enumerationr/w
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.2.3.51.3.3.1.3.2.1.15
rafSpTrapFanNmandatory
Non-Critical Alert: Fan Error.
Enumerationr/w
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.2.3.51.3.3.1.3.2.1.16
rafSpTrapCPUNmandatory
Non-Critical Alert: Memory Error.
Enumerationr/w
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.2.3.51.3.3.1.3.2.1.17
rafSpTrapMemoryNmandatory
Non-Critical Alert: Memory Error.
Enumerationr/w
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.2.3.51.3.3.1.3.2.1.18
rafSpTrapHardwareNmandatory
Non-Critical Alert: Warning - refer to Message ID for specific condition.
Enumerationr/w
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.2.3.51.3.3.1.3.2.1.19
rafSpTrapRLoginmandatory
Sev-Off Alert: Event Remote Login.
Enumerationr/w
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.2.3.51.3.3.1.3.2.1.20
rafSpTrapOsToSmandatory
System Alert: OS Timeout value exceeded.
Enumerationr/w
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.2.3.51.3.3.1.3.2.1.21
rafSpTrapAppSmandatory
System Alert: Application Alert. Refer to Message ID for specific condition.
Enumerationr/w
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.2.3.51.3.3.1.3.2.1.22
rafSpTrapPowerSmandatory
System Alert: Power On or Off.
Enumerationr/w
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.2.3.51.3.3.1.3.2.1.23
rafSpTrapBootSmandatory
System Alert: System Boot Failure.
Enumerationr/w
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.2.3.51.3.3.1.3.2.1.24
rafSpTrapLdrToSmandatory
System Alert: OS Loader Timeout.
Enumerationr/w
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.2.3.51.3.3.1.3.2.1.25
rafSpTrapPFASmandatory
System Alert: Predictive Failure Analysis(PFA) information.
Enumerationr/w
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.2.3.51.3.3.1.3.2.1.26
rafSpTrapSysLogSmandatory
System Alert: System Log 75% full.
Enumerationr/w
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.2.3.51.3.3.1.3.2.1.27
rafSpTrapNwChangeSmandatory
System Alert: Network change notification.
Enumerationr/w
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.2.3.51.3.3.1.3.2.1.28
rafSpTrapAllAuditSmandatory
System Alert: All Audit Events notification.
Enumerationr/w
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.2.3.51.3.3.1.3.2.1.29

remoteAccessIdsTable

table mandatory
.1.3.6.1.4.1.2.3.51.3.3.1.4.1 · 1 row entry · 4 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk remoteAccessIdsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IMM-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IMM-MIB::remoteAccessIdsTable' 
Table of remote access profiles.
          
This table lets you to configure all login profiles. 
You can define up to 12 unique profiles. 
          
Note: By default, the remote supervisor adapter  
comes configured with one login profile that allows remote 
 access using a login ID of 'USERID' and a password of 'PASSW0RD' 
 (the 0 is a zero). To avoid a potential security exposure, 
 we strongly recommend that you change this default Login 
 Profile to values of your choice.
remoteAccessIdsEntry row .1.3.6.1.4.1.2.3.51.3.3.1.4.1.1
Remote access entries.
Indexes
Column Syntax OID
remoteAccessIdEntryIndexmandatory
Index for Remote access entry.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.2.3.51.3.3.1.4.1.1.1
remoteAccessIdEntryUserIdmandatory
Remote access entry null terminated string that
contains the user-id. This can only be modified from
blank to non-blank, then back to blank.
OctetStringr/w
Constraints:
range: 0-16
 .1.3.6.1.4.1.2.3.51.3.3.1.4.1.1.2
remoteAccessIdEntryPasswordmandatory
Remote access entry null terminated string that
contains the password. On a read a NULL string
will be returned for security reasons.
OctetStringr/w
Constraints:
range: 0-20
 .1.3.6.1.4.1.2.3.51.3.3.1.4.1.1.3
remoteAccessIdEntryUserPwdLeftDaysmandatory
left days before password expired for selected user
Integer32
Constraints:
range: 0-365
 .1.3.6.1.4.1.2.3.51.3.3.1.4.1.1.4

remoteAccessUserAuthorityLevelTable

table mandatory
.1.3.6.1.4.1.2.3.51.3.3.1.4.2 · 1 row entry · 12 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk remoteAccessUserAuthorityLevelTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IMM-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IMM-MIB::remoteAccessUserAuthorityLevelTable' 
Table of user authority level profiles.
remoteAccessUserAuthorityLevelEntry row .1.3.6.1.4.1.2.3.51.3.3.1.4.2.1
User authority level entries.
Indexes
Column Syntax OID
ualIndexmandatory
Index for User Authority Level entry.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.2.3.51.3.3.1.4.2.1.1
ualIdmandatory
User ID
OctetString
Constraints:
range: 0-16
 .1.3.6.1.4.1.2.3.51.3.3.1.4.2.1.2
ualSupervisormandatory
User has no restrictions.
Enumerationr/w
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.2.3.51.3.3.1.4.2.1.3
ualReadOnlymandatory
User has only read-only access, and cannot perform any save, modify,
clear, or state affecting operations (eg. restart IMM, restore defaults,
upgrade the firmware, etc.).
Enumerationr/w
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.2.3.51.3.3.1.4.2.1.4
ualAccountManagementmandatory
User can add/modify/delete users and change the global login settings in
the Login Profiles panel.
Enumerationr/w
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.2.3.51.3.3.1.4.2.1.5
ualConsoleAccessmandatory
User can access the remote console.
Enumerationr/w
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.2.3.51.3.3.1.4.2.1.6
ualConsoleAndVirtualMediaAccessmandatory
User can access both the remote console and the virtual media feature.
Enumerationr/w
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.2.3.51.3.3.1.4.2.1.7
ualServerPowerAccessmandatory
User can access the power on and restart functions for the remote server.
These functions are available via the Power/Restart panel.
Enumerationr/w
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.2.3.51.3.3.1.4.2.1.8
ualAllowClearLogmandatory
User can clear the event logs. Everyone can look at the
event logs, but this particular permission is required to clear the logs.
Enumerationr/w
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.2.3.51.3.3.1.4.2.1.9
ualAdapterBasicConfigmandatory
User can modify configuration parameters in the System Settings and Alerts
panels.
Enumerationr/w
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.2.3.51.3.3.1.4.2.1.10
ualAdapterNetworkAndSecurityConfigmandatory
User can modify configuration parameters in the Security, Network Protocols,
Network Interface, Port Assignments, and Serial Port panels.
Enumerationr/w
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.2.3.51.3.3.1.4.2.1.11
ualAdapterAdvancedConfigmandatory
User has no restrictions when configuring the adapter. In addition, the
user is said to have administrative access to the IMM, meaning that the
user can also perform the following advanced functions: firmware upgrades…
Enumerationr/w
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.2.3.51.3.3.1.4.2.1.12

groupIdsTable

table mandatory
.1.3.6.1.4.1.2.3.51.3.3.1.5.1 · 1 row entry · 3 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk groupIdsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IMM-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IMM-MIB::groupIdsTable' 
Table of Group profiles.
          
This table lets you to configure all group profiles.
You can define up to 16 unique profiles.
groupIdsEntry row .1.3.6.1.4.1.2.3.51.3.3.1.5.1.1
Group ID entries.
Indexes
Column Syntax OID
groupIndexmandatory
Index for Group IDs entry.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.2.3.51.3.3.1.5.1.1.1
groupIdmandatory
Group ID. It is a null terminated string that contains the group-id.
It must not be a duplicate of any previously configured ones.
OctetStringr/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.2.3.51.3.3.1.5.1.1.2
groupRolemandatory
Group Role. It indicates if the group has supervisor, operator,
or custom access.
OctetString .1.3.6.1.4.1.2.3.51.3.3.1.5.1.1.3

groupRBSroleTable

table mandatory
.1.3.6.1.4.1.2.3.51.3.3.1.5.2 · 1 row entry · 12 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk groupRBSroleTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IMM-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IMM-MIB::groupRBSroleTable' 
Table of Group Role profiles.
groupRBSroleEntry row .1.3.6.1.4.1.2.3.51.3.3.1.5.2.1
Group Role entries.
Indexes
Column Syntax OID
groupRBSroleIndexmandatory
Index for Group Role entry.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.2.3.51.3.3.1.5.2.1.1
groupRBSroleIdmandatory
Group ID
OctetString
Constraints:
range: 0-63
 .1.3.6.1.4.1.2.3.51.3.3.1.5.2.1.2
groupRBSSupervisormandatory
Group has no restrictions.
Enumerationr/w
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.2.3.51.3.3.1.5.2.1.3
groupRBSOperatormandatory
Group has read-only access, and cannot perform
any save, modify, clear, or state affecting operations
(e.g. restart IMM, restore defaults, upgrade the firmware, etc.).
Enumerationr/w
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.2.3.51.3.3.1.5.2.1.4
groupRBSNetworkSecuritymandatory
Group can modify the configuration in the Security, Network Protocols,
Network Interface, Port Assignments, and Serial Port panels.
Enumerationr/w
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.2.3.51.3.3.1.5.2.1.5
groupRBSUserAccountManagementmandatory
Group can add/modify/delete users and change the Global Login Settings
in the Login Profiles panel.
Enumerationr/w
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.2.3.51.3.3.1.5.2.1.6
groupRBSRemoteConsoleAccessmandatory
Group can access the remote server console.
Enumerationr/w
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.2.3.51.3.3.1.5.2.1.7
groupRBSRemoteConsoleRemoteDiskAccessmandatory
Group can access the remote server console and the remote disk functions
for the remote server.
Enumerationr/w
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.2.3.51.3.3.1.5.2.1.8
groupRBSServerPowerRestartAccessmandatory
Group can access the power on, restart and server timeout functions for
the remote server.
Enumerationr/w
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.2.3.51.3.3.1.5.2.1.9
groupRBSBasicAdapterConfigurationmandatory
Group can modify configuration parameters in the System Settings (excluding
Contact, Location and Server Timeouts) and Alerts panels.
Enumerationr/w
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.2.3.51.3.3.1.5.2.1.10
groupRBSClearEventLogmandatory
Group can clear the event logs. Everyone can look at the event logs, but
this particular permission is required to clear the logs.
Enumerationr/w
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.2.3.51.3.3.1.5.2.1.11
groupRBSAdvancedAdapterConfigurationmandatory
Group has no restrictions when configuring the adapter. In addition the
user is said to have administrative access to the IMM, meaning that the user
can also perform the following advanced functions: firmware upgrades…
Enumerationr/w
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.2.3.51.3.3.1.5.2.1.12

sshClientAuthPubKeyTable

table mandatory
.1.3.6.1.4.1.2.3.51.3.3.1.6.1 · 1 row entry · 9 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk sshClientAuthPubKeyTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IMM-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IMM-MIB::sshClientAuthPubKeyTable' 
A table that contains client authentication
public key information.
sshClientAuthPubKeyEntry row .1.3.6.1.4.1.2.3.51.3.3.1.6.1.1
A information list about a particular SSH
public key used for client authentication.
The primary table index is the same value as
the associated remoteAccessIdEntryIndex.
The secondary table index allows selection
of th…
Indexes
Column Syntax OID
sshClientAuthRemoteAccessIdIndexmandatory
The primary table index is the same value as
the associated remoteAccessIdEntryIndex used
as an index into the remoteAccessIdsTable.
Integer32
Constraints:
range: 1-1000
 .1.3.6.1.4.1.2.3.51.3.3.1.6.1.1.1
sshClientAuthPubKeyIndexmandatory
The secondary table index used to select
one of the client authentication public
keys for a particular remote access Id.
The index is an integer value from 1 to N
where N is the number of keys associated
with a particul…
Integer32
Constraints:
range: 1-1000
 .1.3.6.1.4.1.2.3.51.3.3.1.6.1.1.2
sshClientAuthPubKeyTypemandatory
The type of the SSH public key represented by
this entry.
Enumeration
Enumerated Values:
1sshDss
2sshRsa
 .1.3.6.1.4.1.2.3.51.3.3.1.6.1.1.3
sshClientAuthPubKeySizemandatory
The size of the SSH public key represented by
this entry.
Enumeration
Enumerated Values:
1bits512
2bits768
3bits1024
4bits2048
5bits4096
 .1.3.6.1.4.1.2.3.51.3.3.1.6.1.1.4
sshClientAuthPubKeyFingerprintmandatory
The RSA fingerprint of the SSH public key represented
by this entry.
This value can be used with the SSH client to
verify, on the initial connection, that the Secure Shell
server responding to the request is the server …
OctetString .1.3.6.1.4.1.2.3.51.3.3.1.6.1.1.5
sshClientAuthPubKeyAcceptFrommandatory
This is a filter that describes the set of SSH client
IP addresses and host names that can establish
SSH connections to the AMM authenticated by the public key
represented by this entry of the table. The filter is a
com…
OctetStringr/w .1.3.6.1.4.1.2.3.51.3.3.1.6.1.1.6
sshClientAuthPubKeyCommentmandatory
This is a descriptive string that the administrator may
use to help identify the public key represented by this entry.
It serves no function in the operation of the SSH server.

NOTE:This MIB object can be…
OctetStringr/w .1.3.6.1.4.1.2.3.51.3.3.1.6.1.1.7
sshClientAuthPubKeyActionmandatory
import(1) starts the TFTP file transfer of an SSH
client authentication public key from the TFTP
server to the AMM. The import operation is only
accepted if the associated RemoteAccessIdsEntry row
is configured and the …
Enumerationr/w
Enumerated Values:
1import
2export
 .1.3.6.1.4.1.2.3.51.3.3.1.6.1.1.8
sshClientAuthPubKeyEntryStatusmandatory
This object manages the creation and deletion of this entry.
The steps recommended to install and to activate a new client
authorization public key are:
1. Set values for sshClientAuthPubKeyTftpServer,
sshClientAuthP…
EntryStatusr/w
Type Values:
1valid
2createRequest
3underCreation
4invalid
 .1.3.6.1.4.1.2.3.51.3.3.1.6.1.1.9

ethernetInterfaceStatelessAutoConfigAddressesTable

table mandatory
.1.3.6.1.4.1.2.3.51.3.3.4.1.4.5.3.3.2 · 1 row entry · 3 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk ethernetInterfaceStatelessAutoConfigAddressesTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IMM-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IMM-MIB::ethernetInterfaceStatelessAutoConfigAddressesTable' 
Table of stateless Auto-Config addresses entries
ethernetInterfaceStatelessAutoConfigAddressesEntry row .1.3.6.1.4.1.2.3.51.3.3.4.1.4.5.3.3.2.1
Stateless Auto-Config address entries
Indexes
Column Syntax OID
ethernetInterfaceStatelessAutoConfigAddressesIndexmandatory
Index for stateless Auto-Config addresses.

NOTE: If ethernetInterfaceIPv6StatelessAutoConfigEnabled or
ethernetInterfaceIPv6Enabled is currently disabled, this
object will show nothing.
Integer32
Constraints:
range: 1-1000
 .1.3.6.1.4.1.2.3.51.3.3.4.1.4.5.3.3.2.1.1
ethernetInterfaceStatelessAutoConfigAddressesmandatory
The stateless Auto-Configuration IPv6 address.

NOTE: If ethernetInterfaceIPv6StatelessAutoConfigEnabled or
ethernetInterfaceIPv6Enabled is currently disabled, this
object will show nothing.
InetAddressIPv6
Type Constraints:
range: 16
 .1.3.6.1.4.1.2.3.51.3.3.4.1.4.5.3.3.2.1.2
ethernetInterfaceStatelessAutoConfigAddressesPrefixLenmandatory
The stateless Auto-Configration address prefix length.

NOTE: If ethernetInterfaceIPv6StatelessAutoConfigEnabled or
ethernetInterfaceIPv6Enabled is currently disabled, this
object will show nothing.
Integer32
Constraints:
range: 1-128
 .1.3.6.1.4.1.2.3.51.3.3.4.1.4.5.3.3.2.1.3

snmpCommunityTable

table mandatory
.1.3.6.1.4.1.2.3.51.3.3.4.2.1.5.1 · 1 row entry · 6 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk snmpCommunityTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IMM-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IMM-MIB::snmpCommunityTable' 
Table of SNMP Community entries
snmpCommunityEntry row .1.3.6.1.4.1.2.3.51.3.3.4.2.1.5.1.1
Community table entries
Indexes
Column Syntax OID
snmpCommunityEntryIndexmandatory
Index for SNMP Agent Community entry.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.2.3.51.3.3.4.2.1.5.1.1.1
snmpCommunityEntryCommunityNamemandatory
SNMP Community entry name. Note: Set snmpSystemAgentEnable
to disabled before performing a set of this object.
OctetStringr/w
Constraints:
range: 0-15
 .1.3.6.1.4.1.2.3.51.3.3.4.2.1.5.1.1.2
snmpCommunityEntryCommunityIpAddress1mandatory
SNMP Community IP address or host name.
Can either be a dotted decimal IP string(eg. 9.37.44.2)
or host name. This field also allows two
wildcard values for read-Traps and write-Read-Traps communities:
0.0.0.0 - a…
OctetStringr/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.2.3.51.3.3.4.2.1.5.1.1.3
snmpCommunityEntryCommunityIpAddress2mandatory
SNMP Community IP address or host name.
Can either be a dotted decimal IP string(eg. 9.37.44.2)
or a host name. This field also allows two
wildcard values for read-Traps and write-Read-Traps communities:
0.0.0.0 -…
OctetStringr/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.2.3.51.3.3.4.2.1.5.1.1.4
snmpCommunityEntryCommunityIpAddress3mandatory
SNMP Community IP address or host name.
Can either be a dotted decimal IP string(eg. 9.37.44.2)
or a host name. This field also allows two
wildcard values for read-Traps and write-Read-Traps communities:
0.0.0.0 -…
OctetStringr/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.2.3.51.3.3.4.2.1.5.1.1.5
snmpCommunityEntryCommunityViewTypemandatory
Access Level of the SNMPv1 managers. Note this parameter
is set for each community. Therefore all three managers
in the same community have the same access level.
Enumerationr/w
Enumerated Values:
1read-Traps
2write-Read-Traps
3traps-Only
 .1.3.6.1.4.1.2.3.51.3.3.4.2.1.5.1.1.6

snmpUserProfileTable

table mandatory
.1.3.6.1.4.1.2.3.51.3.3.4.2.1.8.1 · 1 row entry · 6 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk snmpUserProfileTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IMM-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IMM-MIB::snmpUserProfileTable' 
Table of SNMPv3 User Profile entries
snmpUserProfileEntry row .1.3.6.1.4.1.2.3.51.3.3.4.2.1.8.1.1
SNMP User Profile entries
Indexes
Column Syntax OID
snmpUserProfileEntryIndexmandatory
Index for SNMPv3 Agent User Profile entry.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.2.3.51.3.3.4.2.1.8.1.1.1
snmpUserProfileEntryAuthProtmandatory
SNMPv3 User Profile entry - Authentication Protocol
supported by the user.
Enumerationr/w
Enumerated Values:
1none
2md5
3sha
 .1.3.6.1.4.1.2.3.51.3.3.4.2.1.8.1.1.2
snmpUserProfileEntryPrivProtmandatory
SNMPv3 User Profile entry - Privacy Protocol
supported by the user. The Privacy Password must be set
and the Authentication Protocol must be md5 or sha
before this field may be set to des or aes.
Enumerationr/w
Enumerated Values:
1none
2des
4aes
 .1.3.6.1.4.1.2.3.51.3.3.4.2.1.8.1.1.3
snmpUserProfileEntryPrivPasswordmandatory
SNMPv3 User Profile entry - Privacy password
for the user.

NOTE: Value returned for the GET command is
meaningless for this MIB object for security reason.
OctetStringr/w
Constraints:
range: 0-31
 .1.3.6.1.4.1.2.3.51.3.3.4.2.1.8.1.1.4
snmpUserProfileEntryViewTypemandatory
SNMPv3 User Profile entry - Access level (Get and Set)
of the user.
Enumerationr/w
Enumerated Values:
1read-Traps
2read-Write-Traps
 .1.3.6.1.4.1.2.3.51.3.3.4.2.1.8.1.1.5
snmpUserProfileEntryIpAddressmandatory
SNMPv3 User Profile entry - IP address or host name.
Can either be a dotted decimal IP string (e.g. 9.37.44.2)
or if DNS is enabled a host name.
OctetStringr/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.2.3.51.3.3.4.2.1.8.1.1.6

cryptoInsufComplianceTable

table mandatory
.1.3.6.1.4.1.2.3.51.3.3.4.2.4.7.3.1 · 1 row entry · 2 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk cryptoInsufComplianceTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IMM-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IMM-MIB::cryptoInsufComplianceTable' 
This table contains items not in compliance with the current cyrptoMode setting.
cryptoInsufComplianceEntry row .1.3.6.1.4.1.2.3.51.3.3.4.2.4.7.3.1.1
Each row contains an insufficient compliance item name.
Indexes
Column Syntax OID
cryptoInsufComplianceItemIndexmandatory
The index number of one insufficient compliance item entry.
Integer32
Constraints:
range: 1-1000
 .1.3.6.1.4.1.2.3.51.3.3.4.2.4.7.3.1.1.1
cryptoInsufComplianceItemNamemandatory
The name of one insufficient compliance item.
OctetString .1.3.6.1.4.1.2.3.51.3.3.4.2.4.7.3.1.1.2

certDomainNameTable

table mandatory
.1.3.6.1.4.1.2.3.51.3.3.4.2.4.8.1 · 1 row entry · 3 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk certDomainNameTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IMM-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IMM-MIB::certDomainNameTable' 
This table contains certificate domain names and status.
certDomainNameEntry row .1.3.6.1.4.1.2.3.51.3.3.4.2.4.8.1.1
Each row contains a certificate domain name and status.
Indexes
Column Syntax OID
certDomainNameIndexmandatory
The index number of one certificate domain name entry.
Integer32
Constraints:
range: 1-1000
 .1.3.6.1.4.1.2.3.51.3.3.4.2.4.8.1.1.1
certDomainNamemandatory
The Certificate Domain Name of one certificate domain name entry.
OctetString .1.3.6.1.4.1.2.3.51.3.3.4.2.4.8.1.1.2
certDomainNameStatusmandatory
The status of the Certificate Domain Name entry.
OctetString .1.3.6.1.4.1.2.3.51.3.3.4.2.4.8.1.1.3

skrServerTable

table mandatory
.1.3.6.1.4.1.2.3.51.3.3.4.2.4.9.1 · 1 row entry · 3 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk skrServerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IMM-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IMM-MIB::skrServerTable' 
This table contains Storage Key Repository Server hostnames and ports.
skrServerEntry row .1.3.6.1.4.1.2.3.51.3.3.4.2.4.9.1.1
Each row contains a Storage Key Repository Server hostname and port.
Indexes
Column Syntax OID
skrServerIndexmandatory
The index number of one Storage Key Repository Server entry.
Integer32
Constraints:
range: 1-1000
 .1.3.6.1.4.1.2.3.51.3.3.4.2.4.9.1.1.1
skrServerHostnamemandatory
Storage Key Repository Server hostname or IP address.
OctetStringr/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.2.3.51.3.3.4.2.4.9.1.1.2
skrServerPortmandatory
Storage Key Repository Server port number.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2.3.51.3.3.4.2.4.9.1.1.3

activityLogTable

table mandatory
.1.3.6.1.4.1.2.3.51.3.8.5.1 · 1 row entry · 4 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk activityLogTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IMM-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IMM-MIB::activityLogTable' 
Table of Service Advisor Activity Log entries information. This table displays events that were generated 
by the system or user that are called home. The entries are displayed in reverse chronological order 
(most recent call home entry first). For any events that happen with same Date/Time, only one event will be 
called home. If a call home event that is already in the activity log is triggered again on the same event 
source, it will not be called home again unless the prior entry has been acknowledged as corrected or, in the
case of IMM1, 120 hours (5 days) have passed since it initially occurred and was called home.
activityLogEntry row .1.3.6.1.4.1.2.3.51.3.8.5.1.1
Activity Log table entry. Each entry has the result of the call-home attempt,
the service number assigned for the issue by the Support Center, the event ID, event source, date and
time that event occured, and a text mes…
Indexes
Column Syntax OID
activityLogIndexmandatory
The Activity Log index number.
For consistent results, view as a table and not as individual entries.
Integer32
Constraints:
range: 1-1000000
 .1.3.6.1.4.1.2.3.51.3.8.5.1.1.1
activityLogStringmandatory
A string of data detailing one Activity Log entry. The text message is from the original entry in the event log.

For consistent results, view as a table and not as individual entries.
OctetString .1.3.6.1.4.1.2.3.51.3.8.5.1.1.2
activityLogAcknowledgemandatory
The acknowledgement of one Activity Log entry as corrected. This field allows the users to set a reminder next to
certain events to indicate their awareness of the issue. Checking the acknowledge flag will not cause the…
Enumerationr/w
Enumerated Values:
0no
1yes
 .1.3.6.1.4.1.2.3.51.3.8.5.1.1.3
activityLogAttributemandatory
A string of data detailing one Activity Log entry's attribute. It contains states of both calling the Support Center and FTP/TFTP Server.
A PENDING indicates that the system is preparing for the event to be called home …
OctetString .1.3.6.1.4.1.2.3.51.3.8.5.1.1.4

readCallHomeExclusionEventTable

table mandatory
.1.3.6.1.4.1.2.3.51.3.8.7.1 · 1 row entry · 2 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk readCallHomeExclusionEventTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IMM-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IMM-MIB::readCallHomeExclusionEventTable' 
Table of Call Home Exclusion Event entries information.
readCallHomeExclusionEventEntry row .1.3.6.1.4.1.2.3.51.3.8.7.1.1
Call Home Exclusion Event table entry
Indexes
Column Syntax OID
readCallHomeExclusionEventIndexmandatory
The index number of one Call Home Exclusion Event.
For consistent results, view as a table and not as individual entries.
Integer32
Constraints:
range: 1-1000
 .1.3.6.1.4.1.2.3.51.3.8.7.1.1.1
readCallHomeExclusionEventIDmandatory
The Event ID of one Call Home Exclusion Event entry.
For consistent results, view as a table and not as individual entries.
OctetString .1.3.6.1.4.1.2.3.51.3.8.7.1.1.2

scalableComplexPartitionTable

table mandatory
.1.3.6.1.4.1.2.3.51.3.9.2.1 · 1 row entry · 5 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk scalableComplexPartitionTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IMM-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IMM-MIB::scalableComplexPartitionTable' 
Table of scalable complex partition information.
scalableComplexPartitionEntry row .1.3.6.1.4.1.2.3.51.3.9.2.1.1
Scalable complex partition information.
Indexes
Column Syntax OID
scalableComplexPartitionIdentifiermandatory
The unique numeric identifier for a partition defined within a complex
installed in the chassis.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2.3.51.3.9.2.1.1.1
scalableComplexPartitionModemandatory
The currently configured mode of this partition. It is recommended that
a partition be powered off prior to modification of the mode. In addition,
switching a partition mode to stand-alone will cause subsequent partitio…
Enumerationr/w
Enumerated Values:
1partition
2standalone
 .1.3.6.1.4.1.2.3.51.3.9.2.1.1.2
scalableComplexPartitionPriNodeKeymandatory
The Node Key for the primary node in the partition. The Node Key is used
to select partition for some actions that affect all nodes in the partition.
OctetString
Constraints:
range: 4-4
 .1.3.6.1.4.1.2.3.51.3.9.2.1.1.3
scalableComplexPartitionNumNodesmandatory
The number of nodes currently defined for this partition.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2.3.51.3.9.2.1.1.4
scalableComplexPartitionStatusmandatory
The current power status of this partition when the partition has a
valid partition configuration. However, in the event the partition
reports a partition consitency check problem, the invalid state is provided.
Enumeration
Enumerated Values:
1poweredoff
2poweredon
3invalid
 .1.3.6.1.4.1.2.3.51.3.9.2.1.1.5

scalableComplexPartitionCreateTable

table mandatory
.1.3.6.1.4.1.2.3.51.3.9.3.1 · 1 row entry · 2 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk scalableComplexPartitionCreateTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IMM-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IMM-MIB::scalableComplexPartitionCreateTable' 
Table used to identify the nodes to be used in create of a partition.
The nodes are identified by Node key. The first node listed will be the
primary node.
scalableComplexPartitionCreateEntry row .1.3.6.1.4.1.2.3.51.3.9.3.1.1
Node information for partition creation.
Indexes
Column Syntax OID
scalableComplexPartitionCreateIndexmandatory
The table index.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2.3.51.3.9.3.1.1.1
scalableComplexPartitionCreateNodeKeymandatory
The Node Key for a node included in the partition to be created. The first Node Key
in the table is used will be the primary node in the partition to be created.
OctetStringr/w
Constraints:
range: 4-4
 .1.3.6.1.4.1.2.3.51.3.9.3.1.1.2

scalableComplexNodeTable

table mandatory
.1.3.6.1.4.1.2.3.51.3.9.4.1 · 1 row entry · 6 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk scalableComplexNodeTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IMM-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IMM-MIB::scalableComplexNodeTable' 
Table of scalable complex node information. This table provides information
and control actions related to the nodes installed in the chassis.
Complex, partition and port information and control are defined
in their own tables.
scalableComplexNodeEntry row .1.3.6.1.4.1.2.3.51.3.9.4.1.1
Scalable complex node information.
Indexes
Column Syntax OID
scalableComplexNodeIndexmandatory
The node table index.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2.3.51.3.9.4.1.1.1
scalableComplexNodeSerialNumbermandatory
The machine serial number of the node which identifies the node.
Note that uniqueness is not guaranteed.
OctetString
Constraints:
range: 8-8
 .1.3.6.1.4.1.2.3.51.3.9.4.1.1.2
scalableComplexNodeKeymandatory
The Node Key for the node. The Node Key is used to select the
node for some particular action.
OctetString
Constraints:
range: 4-4
 .1.3.6.1.4.1.2.3.51.3.9.4.1.1.3
scalableComplexNodePartitionIDmandatory
For an assigned node, the identifier of the partition this node is related to.
For an unassigned node, this object has no meaning.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2.3.51.3.9.4.1.1.4
scalableComplexNodeRolemandatory
Indicates if the node is assigned to a partition, and if so, provides an
indication of whether the node is the primary node of the partition or not.
Enumeration
Enumerated Values:
1primary
2secondary
255unassigned
 .1.3.6.1.4.1.2.3.51.3.9.4.1.1.5
scalableComplexNodeNumPortsmandatory
The number of remote nodes that this node has links to.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2.3.51.3.9.4.1.1.6

scalableComplexNodePortTable

table mandatory
.1.3.6.1.4.1.2.3.51.3.9.5.1 · 1 row entry · 6 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk scalableComplexNodePortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IMM-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IMM-MIB::scalableComplexNodePortTable' 
Table of scalable complex node port information which provides details
related to the port connectivity. Complex, partition and node information
and control are defined in their own tables.
scalableComplexNodePortEntry row .1.3.6.1.4.1.2.3.51.3.9.5.1.1
Scalable complex node port information.
Indexes
Column Syntax OID
scalableComplexNodePortIndexmandatory
The Node Port table index.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2.3.51.3.9.5.1.1.1
scalableComplexNodePortNummandatory
The port number of a port on this node. Note that this port
number is 0-based, but since it is used as the table index
(0 is not allowed), it will be presented as one more than the
actual port number.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2.3.51.3.9.5.1.1.2
scalableComplexNodePortRemNodeKeymandatory
The Node Key for the remote node.
OctetString
Constraints:
range: 4-4
 .1.3.6.1.4.1.2.3.51.3.9.5.1.1.3
scalableComplexNodePortRemNummandatory
The zero-based port number of the remote port.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2.3.51.3.9.5.1.1.4
scalableComplexNodePortStatusmandatory
The current status of the port.
Enumeration
Enumerated Values:
1disabled
2enabled
255unknown
 .1.3.6.1.4.1.2.3.51.3.9.5.1.1.5
scalableComplexNodePortTypemandatory
The port type.
Enumeration
Enumerated Values:
1qpi
2exa
255unknown
 .1.3.6.1.4.1.2.3.51.3.9.5.1.1.6