IEEE8023-DOT3-LLDP-EXT-V2-MIB Table View

A table that controls selection of LLDP TLVs to be transmitted
on individual ports.

lldpV2Xdot3PortConfigEntry row .1.3.111.2.802.3.1.5.1.1.1.1

LLDP configuration information that controls the
transmission of IEEE 802.3 organizationally defined TLVs on
LLDP transmission capable ports.

This configuration object augments the lldpV2PortConfigEntry of
…

Indexes

No indexes recorded

Column	Syntax	OID
lldpV2Xdot3PortConfigTLVsTxEnable The lldpV2Xdot3PortConfigTLVsTxEnable, defined as a bitmap, includes the IEEE 802.3 organizationally defined set of LLDP TLVs whose transmission is allowed by the local LLDP agent by the network management. Each bit in …	Bitsr/w Enumerated Values: 0 macPhyConfigStatus 1 powerViaMDI 2 unused 3 maxFrameSize	.1.3.111.2.802.3.1.5.1.1.1.1.1

This table contains one row per port of Ethernet port
information (as a part of the LLDP 802.3 organizational
extension) on the local system known to this agent.

lldpV2Xdot3LocPortEntry row .1.3.111.2.802.3.1.5.1.2.1.1

Information about a particular port component.

Indexes

LLDP-V2-MIBlldpV2LocPortIfIndex

Column	Syntax	OID
lldpV2Xdot3LocPortAutoNegSupported The truth value used to indicate whether the given port (associated with the local system) supports Auto-negotiation.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.111.2.802.3.1.5.1.2.1.1.1
lldpV2Xdot3LocPortAutoNegEnabled The truth value used to indicate whether port Auto-negotiation is enabled on the given port associated with the local system.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.111.2.802.3.1.5.1.2.1.1.2
lldpV2Xdot3LocPortAutoNegAdvertisedCap This object contains the value (bitmap) of the ifMauAutoNegCapAdvertisedBits object (defined in IETF RFC 3636) which is associated with the given port on the local system.	OctetString Constraints: range: 2-2	.1.3.111.2.802.3.1.5.1.2.1.1.3
lldpV2Xdot3LocPortOperMauType An integer value that indicates the operational MAU type of the given port on the local system. This object contains the integer value derived from the list position of the corresponding dot3MauType as li…	Unsigned32 Constraints: range: 0-2147483647	.1.3.111.2.802.3.1.5.1.2.1.1.4

This table contains one row per port of power Ethernet
information (as a part of the LLDP IEEE 802.3 organizational
extension) on the local system known to this agent.

lldpV2Xdot3LocPowerEntry row .1.3.111.2.802.3.1.5.1.2.2.1

Information about a particular port component.

Indexes

LLDP-V2-MIBlldpV2LocPortIfIndex

Column	Syntax	OID
lldpV2Xdot3LocPowerPortClass The value that identifies the port Class of the given port associated with the local system.	LLDP-V2-TC-MIBLldpV2PowerPortClass Type Values: 1 pClassPSE 2 pClassPD	.1.3.111.2.802.3.1.5.1.2.2.1.1
lldpV2Xdot3LocPowerMDISupported The truth value used to indicate whether the MDI power is supported on the given port associated with the local system.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.111.2.802.3.1.5.1.2.2.1.2
lldpV2Xdot3LocPowerMDIEnabled The truth value used to identify whether MDI power is enabled on the given port associated with the local system.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.111.2.802.3.1.5.1.2.2.1.3
lldpV2Xdot3LocPowerPairControlable The truth value is derived from the value of pethPsePortPowerPairsControlAbility object (defined in Clause 8) and is used to indicate whether the pair selection can be controlled on the given port associated with the lo…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.111.2.802.3.1.5.1.2.2.1.4
lldpV2Xdot3LocPowerPairs This object contains the value of the pethPsePortPowerPairs object (defined in Clause 8) which is associated with the given port on the local system.	Unsigned32 Constraints: range: 1-2	.1.3.111.2.802.3.1.5.1.2.2.1.5
lldpV2Xdot3LocPowerClass This object contains the value of the pethPsePortPowerClassifications object (defined in Clause 8) which is associated with the given port on the local system.	Unsigned32 Constraints: range: 1-5	.1.3.111.2.802.3.1.5.1.2.2.1.6
lldpV2Xdot3LocPowerType A GET returns an integer indicating whether the local system is a PSE or a PD and whether it is Type 1 or Type 2.	Enumeration Enumerated Values: 0 psetype1 1 psetype2 2 pdtype 3 pdtype2	.1.3.111.2.802.3.1.5.1.2.2.1.7
lldpV2Xdot3LocPowerSource A GET returns an integer indicating the power sources of the local system. A PSE indicates whether it is being powered by a primary power source; a backup power source; or unknown. A PD indicates whether it is being pow…	Enumeration Enumerated Values: 0 pseprimary 1 psebackup 2 pseunknown 3 pdpseandlocal 4 pdpseonly 5 pdunknown	.1.3.111.2.802.3.1.5.1.2.2.1.8
lldpV2Xdot3LocPowerPriority A GET returns the priority of a PD system. For a PSE, this is the priority that the PSE assigns to the PD. For a PD, this is the priority that the PD requests from the PSE. A SET operation changes the priority of the PD…	Enumerationr/w Enumerated Values: 0 low 1 high 2 critical 3 unknown	.1.3.111.2.802.3.1.5.1.2.2.1.9
lldpV2Xdot3LocPDRequestedPowerValue A GET returns the PD requested power value. For a PD, it is the power value that the PD has currently requested from the remote system. PD requested power value is the maximum input average power the PD ever draws under…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.111.2.802.3.1.5.1.2.2.1.10
lldpV2Xdot3LocPSEAllocatedPowerValue A GET returns the PSE allocated power value. For a PSE, it is the power value that the PSE has currently allocated to the remote system. The PSE allocated power value is the maximum input average power that the PSE want…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.111.2.802.3.1.5.1.2.2.1.11
lldpV2Xdot3LocResponseTime A GET returns the response time in seconds of the local system. For a PD, it is the maximum time required to update the value of lldpV2Xdot3LocPDRequestedPowerValue when the remote system requests the PD to change its m…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.111.2.802.3.1.5.1.2.2.1.12
lldpV2Xdot3LocReady The truth value used to identify whether the local Data Link Layer classification engine has completed initialization and is ready to receive and transmit LLDPDUs.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.111.2.802.3.1.5.1.2.2.1.13
lldpV2Xdot3LocReducedOperationPowerValue A GET returns the reduced operation power value. For a PD, it is a power value that is lower than the currently requested power value. This reduced operation power value represents a power state in which the PD could co…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.111.2.802.3.1.5.1.2.2.1.14

This table contains one row per port of maximum frame
size information (as a part of the LLDP IEEE 802.3 organizational
extension) on the local system known to this agent.

lldpV2Xdot3LocMaxFrameSizeEntry row .1.3.111.2.802.3.1.5.1.2.3.1

Maximum Frame Size information about a particular port
component.

Indexes

LLDP-V2-MIBlldpV2LocPortIfIndex

Column	Syntax	OID
lldpV2Xdot3LocMaxFrameSize An integer value indicating the maximum supported frame size in octets on the given port of the local system.	Unsigned32 Constraints: range: 0-65535	.1.3.111.2.802.3.1.5.1.2.3.1.1

This table contains one row per port of Energy Efficient Ethernet
information (as a part of the LLDP IEEE 802.3 organizational
extension) on the local system known to this agent.

lldpV2Xdot3LocEEEEntry row .1.3.111.2.802.3.1.5.1.2.4.1

Information about a particular port component.

Indexes

LLDP-V2-MIBlldpV2LocPortIfIndex

Column	Syntax	OID
lldpV2Xdot3LocTxTwSys A GET returns the value of Tw_sys_tx that the local system can support in the transmit direction. This object maps to the variable LocTxSystemValue as defined in IEEE Std 802.3 78.4.2.3.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.111.2.802.3.1.5.1.2.4.1.1
lldpV2Xdot3LocTxTwSysEcho A GET returns the value of Tw_sys_tx that the remote system is advertising that it can support in the transmit direction and is echoed by the local system under the control of the EEE DLL receiver state diagram. This ob…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.111.2.802.3.1.5.1.2.4.1.2
lldpV2Xdot3LocRxTwSys A GET returns the value of Tw_sys_tx that the local system is requesting in the receive direction. This object maps to the variable LocRxSystemValue as defined in IEEE Std 802.3 78.4.2.3.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.111.2.802.3.1.5.1.2.4.1.3
lldpV2Xdot3LocRxTwSysEcho A GET returns the value of Tw_sys_tx that the remote system is advertising that it is requesting in the receive direction and is echoed by the local system under the control of the EEE DLL transmitter state diagram. Thi…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.111.2.802.3.1.5.1.2.4.1.4
lldpV2Xdot3LocFbTwSys A GET returns the value of the fallback Tw_sys_tx that the local system is advertising to the remote system. This object maps to the variable LocFbSystemValue as defined in IEEE Std 802.3 78.4.2.3.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.111.2.802.3.1.5.1.2.4.1.5
lldpV2Xdot3TxDllReady The truth value used to identify whether the local Data Link Layer EEE layer management function has completed initialization and is ready to receive and transmit LLDPDUs.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.111.2.802.3.1.5.1.2.4.1.6
lldpV2Xdot3RxDllReady The truth value used to identify whether the local Data Link Layer EEE layer management function has completed initialization and is ready to receive and transmit LLDPDUs.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.111.2.802.3.1.5.1.2.4.1.7
lldpV2Xdot3LocDllEnabled The truth value used to identify whether the local system has completed auto-negotiation with a link partner that has indicated at leat one EEE capability.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.111.2.802.3.1.5.1.2.4.1.8

This table contains Ethernet port information (as a part
of the LLDP IEEE 802.3 organizational extension) of the remote
system.

lldpV2Xdot3RemPortEntry row .1.3.111.2.802.3.1.5.1.3.1.1

Information about a particular physical network connection.

Indexes

LLDP-V2-MIBlldpV2RemTimeMark LLDP-V2-MIBlldpV2RemLocalIfIndex LLDP-V2-MIBlldpV2RemLocalDestMACAddress LLDP-V2-MIBlldpV2RemIndex

Column	Syntax	OID
lldpV2Xdot3RemPortAutoNegSupported The truth value used to indicate whether the given port (associated with remote system) supports Auto-negotiation.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.111.2.802.3.1.5.1.3.1.1.1
lldpV2Xdot3RemPortAutoNegEnabled The truth value used to indicate whether port Auto-negotiation is enabled on the given port associated with the remote system.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.111.2.802.3.1.5.1.3.1.1.2
lldpV2Xdot3RemPortAutoNegAdvertisedCap This object contains the value (bitmap) of the ifMauAutoNegCapAdvertisedBits object (defined in IETF RFC 3636) which is associated with the given port on the remote system.	OctetString Constraints: range: 2-2	.1.3.111.2.802.3.1.5.1.3.1.1.3
lldpV2Xdot3RemPortOperMauType An integer value that indicates the operational MAU type of the sending device. This object contains the integer value derived from the list position of the corresponding dot3MauType as listed in in Claus…	Unsigned32 Constraints: range: 0-2147483647	.1.3.111.2.802.3.1.5.1.3.1.1.4

This table contains Ethernet power information (as a part
of the LLDP IEEE 802.3 organizational extension) of the remote
system.

lldpV2Xdot3RemPowerEntry row .1.3.111.2.802.3.1.5.1.3.2.1

Information about a particular physical network connection.

Indexes

LLDP-V2-MIBlldpV2RemTimeMark LLDP-V2-MIBlldpV2RemLocalIfIndex LLDP-V2-MIBlldpV2RemLocalDestMACAddress LLDP-V2-MIBlldpV2RemIndex

Column	Syntax	OID
lldpV2Xdot3RemPowerPortClass The value that identifies the port Class of the given port associated with the remote system.	LLDP-V2-TC-MIBLldpV2PowerPortClass Type Values: 1 pClassPSE 2 pClassPD	.1.3.111.2.802.3.1.5.1.3.2.1.1
lldpV2Xdot3RemPowerMDISupported The truth value used to indicate whether the MDI power is supported on the given port associated with the remote system.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.111.2.802.3.1.5.1.3.2.1.2
lldpV2Xdot3RemPowerMDIEnabled The truth value used to identify whether MDI power is enabled on the given port associated with the remote system.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.111.2.802.3.1.5.1.3.2.1.3
lldpV2Xdot3RemPowerPairControlable The truth value is derived from the value of pethPsePortPowerPairsControlAbility object (defined in Clause 8) and is used to indicate whether the pair selection can be controlled on the given port associated with the re…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.111.2.802.3.1.5.1.3.2.1.4
lldpV2Xdot3RemPowerPairs This object contains the value of the pethPsePortPowerPairs object (defined in Clause 8) which is associated with the given port on the remote system.	Unsigned32 Constraints: range: 1-2	.1.3.111.2.802.3.1.5.1.3.2.1.5
lldpV2Xdot3RemPowerClass This object contains the value of the pethPsePortPowerClassifications object (defined in Clause 8) which is associated with the given port on the remote system.	Unsigned32 Constraints: range: 1-5	.1.3.111.2.802.3.1.5.1.3.2.1.6
lldpV2Xdot3RemPowerType A GET returns an integer indicating whether the remote system is a PSE or a PD and whether it is Type 1 or Type 2.	Enumeration Enumerated Values: 0 psetype1 1 psetype2 2 pdtype 3 pdtype2	.1.3.111.2.802.3.1.5.1.3.2.1.7
lldpV2Xdot3RemPowerSource A GET returns an integer indicating the power sources of the remote system. When the remote system is a PSE, it indicates whether it is being powered by a primary power source; a backup power source; or unknown. When th…	Enumeration Enumerated Values: 0 pseprimary 1 psebackup 2 pseunknown 3 pdpseandlocal 4 pdlocalonly 5 pdpseonly 6 pdunknown	.1.3.111.2.802.3.1.5.1.3.2.1.8
lldpV2Xdot3RemPowerPriority A GET returns the priority of a PD system. For a PSE, this is the priority that the remote system requests. For a PD, this is the priority that the remote system has assigned.	Enumerationr/w Enumerated Values: 0 low 1 high 2 critical 3 unknown	.1.3.111.2.802.3.1.5.1.3.2.1.9
lldpV2Xdot3RemPDRequestedPowerValue A GET returns the PD requested power value that was used by the remote system to compute the power value that is has currently allocated to the PD. For a PSE, it is the PD requested power value received from the remote …	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.111.2.802.3.1.5.1.3.2.1.10
lldpV2Xdot3RemPSEAllocatedPowerValue A GET returns the PSE allocated power value received from the remote system. For a PSE, it is the PSE allocated power value that was used by the remote system to compute the power value that it has currently requested f…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.111.2.802.3.1.5.1.3.2.1.11

This table contains one row per port/destination
address pair of maximum frame
size information (as a part of the LLDP IEEE 802.3
organizational extension) of the remote system.

lldpV2Xdot3RemMaxFrameSizeEntry row .1.3.111.2.802.3.1.5.1.3.3.1

Maximum Frame Size information about a particular port
component.

Indexes

LLDP-V2-MIBlldpV2RemTimeMark LLDP-V2-MIBlldpV2RemLocalIfIndex LLDP-V2-MIBlldpV2RemLocalDestMACAddress LLDP-V2-MIBlldpV2RemIndex

Column	Syntax	OID
lldpV2Xdot3RemMaxFrameSize An integer value indicating the maximum supported frame size in octets on the port component associated with the remote system.	Unsigned32 Constraints: range: 0-65535	.1.3.111.2.802.3.1.5.1.3.3.1.1

This table contains one row per port of Energy Efficient Ethernet
information (as a part of the LLDP IEEE 802.3 organizational
extension) on the local system known to this agent.

lldpV2Xdot3RemEEEEntry row .1.3.111.2.802.3.1.5.1.3.4.1

Information about a particular port component.

Indexes

LLDP-V2-MIBlldpV2RemLocalIfIndex

Column	Syntax	OID
lldpV2Xdot3RemTxTwSys A GET returns the value of Tw_sys_tx that the remote system can support in the transmit direction. This object maps to the variable RemTxSystemValue as defined in IEEE Std 802.3 78.4.2.3.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.111.2.802.3.1.5.1.3.4.1.1
lldpV2Xdot3RemTxTwSysEcho A GET returns the value of Tw_sys_tx that the local system is advertising that it can support in the transmit direction as echoed by the remote system under the control of the EEE DLL receiver state diagram. This objec…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.111.2.802.3.1.5.1.3.4.1.2
lldpV2Xdot3RemRxTwSys A GET returns the value of Tw_sys_tx that the remote system is requesting in the receive direction. This object maps to the variable RemRxSystemValue as defined in IEEE Std 802.3 78.4.2.3.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.111.2.802.3.1.5.1.3.4.1.3
lldpV2Xdot3RemRxTwSysEcho A GET returns the value of Tw_sys_tx that the local system is advertising that it is requesting in the receive direction and is echoed by the remote system under the control of the EEE DLL transmitter state diagram. Thi…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.111.2.802.3.1.5.1.3.4.1.4
lldpV2Xdot3RemFbTwSys A GET returns the value of the fallback Tw_sys_tx that the remote system is advertising. This object maps to the variable RemFbSystemValue as defined in IEEE Std 802.3 78.4.2.3.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.111.2.802.3.1.5.1.3.4.1.5