IEEE8021-SRP-MIB
The Bridge MIB module for managing devices that support
the IEEE Std 802.1Q Stream Reservation Protocol.
Unless otherwise indicated, the references in this MIB
module are to IEEE Std 802.1Q.
Copyright (C) IEEE (2018).
This version of this MIB module is part of IEEE Std 802.1Q;
see the draft itself for full legal notices.
- Source file
IEEE8021-SRP-MIB- Last revised
- Identity
ieee8021SrpMib- Base OID
1.3.111.2.802.1.1.19
Imported Objects
| IEEE8021-BRIDGE-MIB | ieee8021BridgeBaseComponentId ieee8021BridgeBaseEntry ieee8021BridgeBasePort ieee8021BridgeBasePortEntry |
| IEEE8021-FQTSS-MIB | IEEE8021FqtssTrafficClassValue |
| IEEE8021-TC-MIB | IEEE8021PriorityCodePoint IEEE8021VlanIndex ieee802dot1mibs |
| SNMPv2-CONF | MODULE-COMPLIANCE (no object page) OBJECT-GROUP (no object page) |
| SNMPv2-SMI | Counter64 MODULE-IDENTITY (no object page) OBJECT-TYPE (no object page) Unsigned32 |
| SNMPv2-TC | MacAddress TEXTUAL-CONVENTION (no object page) TruthValue |
Net-SNMP examples using the rfc MIB directory Show commands
These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.
Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'IEEE8021-SRP-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'IEEE8021-SRP-MIB::ieee8021SrpMib'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IEEE8021-SRP-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IEEE8021-SRP-MIB::ieee8021SrpMib'
Objects (62)
Showing 62 of 62 objects
Object legend
Object type
Icons distinguish tables, entry rows, columns, scalars, and structural nodes.
SNMPv2-TCTruthValue
Syntax
Blue badges identify the value syntax. Connected badges read as defining module and convention.
IF-MIBifIndex
Table index
Green identifies an index object; yellow names its module when the index is defined elsewhere.
r/w
deprecated
obsolete
Access and status
r/w means read-write. Grey labels mark definitions retained for compatibility.
OBS ✓
Observium use
The indicator appears only when Observium directly references that object.
ifOperStatus
.1.3.6.1.2.1…
Names and OIDs
Object names link to their detail pages. Hover or focus a linked name or badge for available definition details.
.1.3.111.2.802.1.1.19 |
||
.1.3.111.2.802.1.1.19.0 |
||
.1.3.111.2.802.1.1.19.1 |
||
.1.3.111.2.802.1.1.19.1.1 |
||
.1.3.111.2.802.1.1.19.1.1.1 |
||
.1.3.111.2.802.1.1.19.1.1.1.1 |
||
.1.3.111.2.802.1.1.19.1.1.1.1.1 |
||
.1.3.111.2.802.1.1.19.1.1.1.1.2 |
||
.1.3.111.2.802.1.1.19.1.1.1.1.3 |
||
.1.3.111.2.802.1.1.19.1.1.1.1.4 |
||
.1.3.111.2.802.1.1.19.1.1.1.1.5 |
||
.1.3.111.2.802.1.1.19.1.1.1.1.6 |
||
.1.3.111.2.802.1.1.19.1.1.2 |
||
.1.3.111.2.802.1.1.19.1.1.2.1 |
||
.1.3.111.2.802.1.1.19.1.1.2.1.1 |
||
|
failed MSRP registrationsSNMPv2-SMICounter64
|
.1.3.111.2.802.1.1.19.1.1.2.1.2 |
|
.1.3.111.2.802.1.1.19.1.1.2.1.3 |
||
.1.3.111.2.802.1.1.19.1.1.2.1.4 |
||
.1.3.111.2.802.1.1.19.1.1.2.1.5 |
||
.1.3.111.2.802.1.1.19.1.2 |
||
.1.3.111.2.802.1.1.19.1.2.1 |
||
.1.3.111.2.802.1.1.19.1.2.1.1 |
||
.1.3.111.2.802.1.1.19.1.2.1.1.1 |
||
|
nano-secondsSNMPv2-SMIUnsigned32
|
.1.3.111.2.802.1.1.19.1.2.1.1.2 |
|
.1.3.111.2.802.1.1.19.1.3 |
||
.1.3.111.2.802.1.1.19.1.3.1 |
||
.1.3.111.2.802.1.1.19.1.3.1.1 |
||
.1.3.111.2.802.1.1.19.1.3.1.1.1 |
||
.1.3.111.2.802.1.1.19.1.3.1.1.2 |
||
.1.3.111.2.802.1.1.19.1.3.1.1.3 |
||
|
Unsigned32
|
.1.3.111.2.802.1.1.19.1.3.1.1.4 |
|
|
Unsigned32
|
.1.3.111.2.802.1.1.19.1.3.1.1.5 |
|
.1.3.111.2.802.1.1.19.1.3.1.1.6 |
||
.1.3.111.2.802.1.1.19.1.3.1.1.7 |
||
.1.3.111.2.802.1.1.19.1.3.2 |
||
.1.3.111.2.802.1.1.19.1.3.2.1 |
||
.1.3.111.2.802.1.1.19.1.3.2.1.1 |
||
.1.3.111.2.802.1.1.19.1.3.2.1.2 |
||
.1.3.111.2.802.1.1.19.1.3.2.1.3 |
||
|
Unsigned32
|
.1.3.111.2.802.1.1.19.1.3.2.1.4 |
|
|
Unsigned32
|
.1.3.111.2.802.1.1.19.1.3.2.1.5 |
|
.1.3.111.2.802.1.1.19.1.3.2.1.6 |
||
.1.3.111.2.802.1.1.19.1.3.2.1.7 |
||
.1.3.111.2.802.1.1.19.1.4 |
||
.1.3.111.2.802.1.1.19.1.4.1 |
||
.1.3.111.2.802.1.1.19.1.4.1.1 |
||
.1.3.111.2.802.1.1.19.1.4.1.1.1 |
||
.1.3.111.2.802.1.1.19.1.4.1.1.2 |
||
.1.3.111.2.802.1.1.19.1.4.1.1.3 |
||
|
nano-secondsSNMPv2-SMIUnsigned32
|
.1.3.111.2.802.1.1.19.1.4.1.1.4 |
|
|
OctetString
|
.1.3.111.2.802.1.1.19.1.4.1.1.5 |
|
.1.3.111.2.802.1.1.19.1.4.1.1.6 |
||
|
framesSNMPv2-SMICounter64
|
.1.3.111.2.802.1.1.19.1.4.1.1.7 |
|
|
secondsSNMPv2-SMIUnsigned32
|
.1.3.111.2.802.1.1.19.1.4.1.1.8 |
|
.1.3.111.2.802.1.1.19.1.4.2 |
||
.1.3.111.2.802.1.1.19.1.4.2.1 |
||
.1.3.111.2.802.1.1.19.1.4.2.1.1 |
||
.1.3.111.2.802.1.1.19.1.4.2.1.2 |
||
|
nano-secondsSNMPv2-SMIUnsigned32
|
.1.3.111.2.802.1.1.19.1.4.2.1.3 |
|
.1.3.111.2.802.1.1.19.2 |
||
.1.3.111.2.802.1.1.19.2.1 |
||
.1.3.111.2.802.1.1.19.2.2 |
Dependencies (11) 6 direct · 5 transitive Show tree and compile order Hide dependency details
Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.
Dependency tree
Dependency-first compile order
- SNMPv2-SMIrfc
- SNMPv2-TCrfc
- IEEE8021-TC-MIBrfc
- IANAifType-MIBrfc
- SNMPv2-CONFrfc
- SNMPv2-MIBrfc
- IF-MIBrfc
- SNMP-FRAMEWORK-MIBrfc
- IEEE8021-BRIDGE-MIBrfc
- BRIDGE-MIBrfc
- IEEE8021-FQTSS-MIBrfc
- IEEE8021-SRP-MIBrfcselected
Type Definitions (5)
| Enumeration |
talkerAdvertise(0)talkerFailed(1)listenerAskingFailed(2)listenerReady(3)listenerReadyFailed(4) |
|
| Enumeration |
talkerRegistrations(0)listenerRegistrations(1) |
|
| Enumeration |
noFailure(0)insufficientBandwidth(1)insufficientResources(2)insufficientTrafficClassBandwidth(3)streamIDInUse(4)streamDestinationAddressInUse(5)streamPreemptedByHigherRank(6)latencyHasChanged(7)egressPortNotAVBCapable(8)useDifferentDestinationAddress(9)outOfMSRPResources(10)outOfMMRPResources(11)cannotStoreDestinationAddress(12)priorityIsNoAnSRCLass(13)maxFrameSizeTooLarge(14)maxFanInPortsLimitReached(15)firstValueChangedForStreamID(16)vlanBlockedOnEgress(17)vlanTaggingDisabledOnEgress(18)srClassPriorityMismatch(19) |
|
| OctetString |
range: 8 |
|
| Enumeration |
emergency(0)nonEmergency(1) |
Conformance Groups (8)
Compliance Statements (1)
OID
.1.3.111.2.802.1.1.19.2.1.1The compliance statement for devices supporting
Stream Reservation Protocol.
Support of the objects defined in the IEEE8021-SRP MIB
also requires support of the IEEE8021-BRIDGE-MIB; the
provisions of 17.3.2 apply to implementations claiming
support of the IEEE8021-SRP MIB.
Stream Reservation Protocol.
Support of the objects defined in the IEEE8021-SRP MIB
also requires support of the IEEE8021-BRIDGE-MIB; the
provisions of 17.3.2 apply to implementations claiming
support of the IEEE8021-SRP MIB.
Required groups
| mandatory | ieee8021SrpConfigurationGroup | |
| mandatory | ieee8021SrpLatencyGroup | |
| mandatory | ieee8021SrpStreamsGroup | |
| mandatory | ieee8021SrpReservationsGroup | |
| optional | ieee8021SrpConfigurationPruningGroup |
Implementation of this group is optional. Implementation will allow configuration of pruning behavior for SRP. |
| optional | ieee8021SrpMonitoringSRclassesGroup |
Implementation of this group is optional. Implementation will allow configuration of pruning behavior for SRP. |
| optional | ieee8021SrpStreamsPreloadGroup |
Implementation of this group is optional. Implementation will allow to preload parameters for each StreamId on Bridge Ports as the Bridge initializes. |
| optional | ieee8021SrpReservationsPreloadGroup |
Implementation of this group is optional. Implementation will allow to initialize Streams within each Bridge as it powers up, to preload the Stream registrations that will later be provided by operation of SRP. |