IEEE8021-PBB-MIB
The Provider Backbone Bridge (PBB) MIB module for managing
devices that support PBB.
Unless otherwise indicated, the references in this MIB
module are to IEEE Std 802.1Q.
Copyright (C) IEEE (2018).
This version of this MIB module is part of IEEE Std 802.1Q;
see the draft itself for full legal notices.
- Source file
IEEE8021-PBB-MIB- Last revised
- Identity
ieee8021PbbMib- Base OID
1.3.111.2.802.1.1.9
Imported Objects
| IEEE8021-BRIDGE-MIB | ieee8021BridgeBasePort ieee8021BridgeBasePortComponentId |
| IEEE8021-TC-MIB | IEEE8021BridgePortNumber IEEE8021PbbComponentIdentifier IEEE8021PbbIngressEgress IEEE8021PbbServiceIdentifier IEEE8021PbbServiceIdentifierOrUnassigned IEEE8021PriorityCodePoint IEEE8021PriorityValue ieee802dot1mibs |
| IF-MIB | InterfaceIndex InterfaceIndexOrZero |
| Q-BRIDGE-MIB | VlanId |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE (no object page) OBJECT-GROUP (no object page) |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY (no object page) OBJECT-TYPE (no object page) Unsigned32 |
| SNMPv2-TC | MacAddress RowStatus StorageType TruthValue |
Net-SNMP examples using the rfc MIB directory Show commands
These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.
Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'IEEE8021-PBB-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'IEEE8021-PBB-MIB::ieee8021PbbMib'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IEEE8021-PBB-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IEEE8021-PBB-MIB::ieee8021PbbMib'
Objects (72)
Showing 72 of 72 objects
Object legend
Object type
Icons distinguish tables, entry rows, columns, scalars, and structural nodes.
SNMPv2-TCTruthValue
Syntax
Blue badges identify the value syntax. Connected badges read as defining module and convention.
IF-MIBifIndex
Table index
Green identifies an index object; yellow names its module when the index is defined elsewhere.
r/w
deprecated
obsolete
Access and status
r/w means read-write. Grey labels mark definitions retained for compatibility.
OBS ✓
Observium use
The indicator appears only when Observium directly references that object.
ifOperStatus
.1.3.6.1.2.1…
Names and OIDs
Object names link to their detail pages. Hover or focus a linked name or badge for available definition details.
.1.3.111.2.802.1.1.9 |
||
.1.3.111.2.802.1.1.9.0 |
||
.1.3.111.2.802.1.1.9.1 |
||
.1.3.111.2.802.1.1.9.1.1 |
||
.1.3.111.2.802.1.1.9.1.1.1 |
||
.1.3.111.2.802.1.1.9.1.1.1.1 |
||
|
OctetString
|
.1.3.111.2.802.1.1.9.1.1.1.2 |
|
.1.3.111.2.802.1.1.9.1.1.1.3 |
||
|
Unsigned32
|
.1.3.111.2.802.1.1.9.1.1.1.4 |
|
.1.3.111.2.802.1.1.9.1.1.1.5 |
||
.1.3.111.2.802.1.1.9.1.1.1.6 |
||
.1.3.111.2.802.1.1.9.1.1.10 |
||
.1.3.111.2.802.1.1.9.1.1.10.1 |
||
.1.3.111.2.802.1.1.9.1.1.10.1.1 |
||
.1.3.111.2.802.1.1.9.1.1.2 |
||
.1.3.111.2.802.1.1.9.1.1.2.1 |
||
.1.3.111.2.802.1.1.9.1.1.2.1.1 |
||
.1.3.111.2.802.1.1.9.1.1.2.1.2 |
||
.1.3.111.2.802.1.1.9.1.1.2.1.3 |
||
|
|
.1.3.111.2.802.1.1.9.1.1.2.1.4 |
|
.1.3.111.2.802.1.1.9.1.1.2.1.5 |
||
.1.3.111.2.802.1.1.9.1.1.2.1.6 |
||
.1.3.111.2.802.1.1.9.1.1.3 |
||
.1.3.111.2.802.1.1.9.1.1.3.1 |
||
.1.3.111.2.802.1.1.9.1.1.3.1.1 |
||
.1.3.111.2.802.1.1.9.1.1.3.1.2 |
||
.1.3.111.2.802.1.1.9.1.1.3.1.3 |
||
.1.3.111.2.802.1.1.9.1.1.4 |
||
.1.3.111.2.802.1.1.9.1.1.4.1 |
||
.1.3.111.2.802.1.1.9.1.1.4.1.1 |
||
.1.3.111.2.802.1.1.9.1.1.4.1.10 |
||
.1.3.111.2.802.1.1.9.1.1.4.1.2 |
||
|
OctetString
|
.1.3.111.2.802.1.1.9.1.1.4.1.3 |
|
.1.3.111.2.802.1.1.9.1.1.4.1.4 |
||
|
OctetString
|
.1.3.111.2.802.1.1.9.1.1.4.1.5 |
|
|
OctetString
|
.1.3.111.2.802.1.1.9.1.1.4.1.6 |
|
|
OctetString
|
.1.3.111.2.802.1.1.9.1.1.4.1.7 |
|
|
OctetString
|
.1.3.111.2.802.1.1.9.1.1.4.1.8 |
|
|
OctetString
|
.1.3.111.2.802.1.1.9.1.1.4.1.9 |
|
.1.3.111.2.802.1.1.9.1.1.5 |
||
.1.3.111.2.802.1.1.9.1.1.5.1 |
||
.1.3.111.2.802.1.1.9.1.1.5.1.1 |
||
.1.3.111.2.802.1.1.9.1.1.5.1.2 |
||
.1.3.111.2.802.1.1.9.1.1.5.1.3 |
||
.1.3.111.2.802.1.1.9.1.1.6 |
||
.1.3.111.2.802.1.1.9.1.1.6.1 |
||
.1.3.111.2.802.1.1.9.1.1.6.1.1 |
||
|
Integer32
|
.1.3.111.2.802.1.1.9.1.1.6.1.2 |
|
.1.3.111.2.802.1.1.9.1.1.6.1.3 |
||
.1.3.111.2.802.1.1.9.1.1.6.1.4 |
||
.1.3.111.2.802.1.1.9.1.1.7 |
||
.1.3.111.2.802.1.1.9.1.1.7.1 |
||
.1.3.111.2.802.1.1.9.1.1.7.1.1 |
||
|
Integer32
|
.1.3.111.2.802.1.1.9.1.1.7.1.2 |
|
.1.3.111.2.802.1.1.9.1.1.7.1.3 |
||
.1.3.111.2.802.1.1.9.1.1.7.1.4 |
||
.1.3.111.2.802.1.1.9.1.1.8 |
||
.1.3.111.2.802.1.1.9.1.1.8.1 |
||
.1.3.111.2.802.1.1.9.1.1.8.1.1 |
||
.1.3.111.2.802.1.1.9.1.1.8.1.2 |
||
.1.3.111.2.802.1.1.9.1.1.8.1.3 |
||
.1.3.111.2.802.1.1.9.1.1.9 |
||
.1.3.111.2.802.1.1.9.1.1.9.1 |
||
.1.3.111.2.802.1.1.9.1.1.9.1.1 |
||
.1.3.111.2.802.1.1.9.1.1.9.1.2 |
||
.1.3.111.2.802.1.1.9.1.1.9.1.3 |
||
|
|
.1.3.111.2.802.1.1.9.1.1.9.1.4 |
|
.1.3.111.2.802.1.1.9.1.1.9.1.5 |
||
.1.3.111.2.802.1.1.9.1.1.9.1.6 |
||
.1.3.111.2.802.1.1.9.2 |
||
.1.3.111.2.802.1.1.9.2.1 |
||
.1.3.111.2.802.1.1.9.2.2 |
Dependencies (19) 8 direct · 11 transitive Show tree and compile order Hide dependency details
Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.
Dependency tree
Dependency-first compile order
- SNMPv2-SMIrfc
- SNMPv2-TCrfc
- IEEE8021-TC-MIBrfc
- IANAifType-MIBrfc
- SNMPv2-CONFrfc
- SNMPv2-MIBrfc
- IF-MIBrfc
- SNMP-FRAMEWORK-MIBrfc
- IEEE8021-BRIDGE-MIBrfc
- BRIDGE-MIBrfc
- P-BRIDGE-MIBrfc
- RMON-MIBrfc
- RFC-1212rfc
- RFC1155-SMIrfc
- RFC1213-MIBrfc
- RFC1271-MIBrfc
- TOKEN-RING-RMON-MIBrfc
- RMON2-MIBrfc
- Q-BRIDGE-MIBrfc
- IEEE8021-PBB-MIBrfcselected
Conformance Groups (10)
|
ieee8021PbbBackboneEdgeBridgeAddress ieee8021PbbBackboneEdgeBridgeName ieee8021PbbNumberOfIComponents ieee8021PbbNumberOfBComponents ieee8021PbbNumberOfBebPorts
The collection of objects used to represent a Backbone
Edge Bridge. |
.1.3.111.2.802.1.1.9.2.1.1
|
|
|
ieee8021PbbVipPipIfIndex ieee8021PbbVipISid ieee8021PbbVipDefaultDstBMAC ieee8021PbbVipType ieee8021PbbVipRowStatus ieee8021PbbISidToVipComponentId ieee8021PbbISidToVipPort
The collection of objects used to represent a Virtual
Instance Port (VIP). |
.1.3.111.2.802.1.1.9.2.1.2
|
|
|
ieee8021PbbNextAvailablePipIfIndex ieee8021PbbPipBMACAddress ieee8021PbbPipName ieee8021PbbPipIComponentId ieee8021PbbPipVipMap ieee8021PbbPipVipMap1 ieee8021PbbPipVipMap2 ieee8021PbbPipVipMap3 ieee8021PbbPipVipMap4 ieee8021PbbPipRowStatus
The collection of objects used to represent a Provider
Instance Port (PIP). |
.1.3.111.2.802.1.1.9.2.1.3
|
|
|
A collection of objects defining the priority
applicable to each port for media that do not support native priority. |
.1.3.111.2.802.1.1.9.2.1.4
|
|
|
A collection of objects providing statistics counters for
decoding priority and drop eligibility for Bridge Ports. |
.1.3.111.2.802.1.1.9.2.1.5
|
|
|
A collection of objects providing statistics counters for
encoding priority and drop eligibility for Bridge Ports. |
.1.3.111.2.802.1.1.9.2.1.6
|
|
|
ieee8021PbbVipToPipMappingPipIfIndex ieee8021PbbVipToPipMappingStorageType ieee8021PbbVipToPipMappingRowStatus
The collection of objects used to represent the mapping
of a VIP to a PIP. |
.1.3.111.2.802.1.1.9.2.1.7
|
|
|
ieee8021PbbCBPServiceMappingBVid ieee8021PbbCBPServiceMappingDefaultBackboneDest ieee8021PbbCBPServiceMappingType ieee8021PbbCBPServiceMappingLocalSid ieee8021PbbCBPServiceMappingRowStatus
The collection of objects used to represent a service instance.
|
.1.3.111.2.802.1.1.9.2.1.8
|
|
|
The collection of objects used to dynamically create/delete
CBPs in a PBB. |
.1.3.111.2.802.1.1.9.2.1.9
|
|
|
The collection of objects specific to PBB Bridges operating
in a PBB-TE-aware manner. |
.1.3.111.2.802.1.1.9.2.1.10
|
Compliance Statements (2)
OID
.1.3.111.2.802.1.1.9.2.2.1The compliance statement for devices supporting Provider
Backbone Bridging as defined in IEEE Std 802.1ah.
Backbone Bridging as defined in IEEE Std 802.1ah.
Required groups
| mandatory | ieee8021PbbBackboneEdgeBridgeGroup | |
| mandatory | ieee8021PbbVipGroup | |
| mandatory | ieee8021PbbPipGroup | |
| mandatory | ieee8021PbbVipToPipMappingGroup | |
| mandatory | ieee8021PbbCBPServiceMappingGroup | |
| mandatory | ieee8021PbbDynamicCbpGroup | |
| optional | ieee8021PbbDefaultPriorityGroup |
This group is mandatory only for devices supporting the priority forwarding operations defined by the extended Bridge services with media types, such as Ethernet, that do not support native priority. |
| optional | ieee8021PbbPipDecodingGroup |
This group is optional and supports Priority Code Point Decoding Table for a PIP of a provider Bridge. |
| optional | ieee8021PbbPipEncodingGroup |
This group is optional and supports Priority Code Point Encoding Table for a PIP of a provider Bridge. |
Object refinements
| Object | Access | Syntax | Description |
|---|---|---|---|
| ieee8021PbbPipName | readonly | Read-write access for this object is not required. | |
| ieee8021PbbPipVipMap | readonly | Read-write access for this object is not required. | |
| ieee8021PbbVipToPipMappingPipIfIndex | readonly | Read-write access for this object is not required. | |
| ieee8021PbbCBPServiceMappingBVid | noaccess | Read-only and read-write access for this object are optional. | |
| ieee8021PbbCBPServiceMappingDefaultBackboneDest | noaccess | Read-only and read-write access for this object are optional. | |
| ieee8021PbbCBPServiceMappingLocalSid | noaccess | Read-only and read-write access for this object are optional. |
OID
.1.3.111.2.802.1.1.9.2.2.2The compliance statement for devices supporting Provider
Backbone Bridging with traffic engineering as defined in IEEE Std 802.1ah
and IEEE Std 802.1Qay.
Backbone Bridging with traffic engineering as defined in IEEE Std 802.1ah
and IEEE Std 802.1Qay.
Required groups
| mandatory | ieee8021PbbBackboneEdgeBridgeGroup | |
| mandatory | ieee8021PbbVipGroup | |
| mandatory | ieee8021PbbPipGroup | |
| mandatory | ieee8021PbbVipToPipMappingGroup | |
| mandatory | ieee8021PbbCBPServiceMappingGroup | |
| mandatory | ieee8021PbbDynamicCbpGroup | |
| mandatory | ieee8021PbbVipPbbTeGroup | |
| optional | ieee8021PbbDefaultPriorityGroup |
This group is mandatory only for devices supporting the priority forwarding operations defined by the extended Bridge services with media types, such as Ethernet, that do not support native priority. |
| optional | ieee8021PbbPipDecodingGroup |
This group is optional and supports Priority Code Point Decoding Table for a PIP of a provider Bridge. |
| optional | ieee8021PbbPipEncodingGroup |
This group is optional and supports Priority Code Point Encoding Table for a PIP of a provider Bridge. |
Object refinements
| Object | Access | Syntax | Description |
|---|---|---|---|
| ieee8021PbbPipName | readonly | Read-write access for this object is not required. | |
| ieee8021PbbPipVipMap | readonly | Read-write access for this object is not required. | |
| ieee8021PbbVipToPipMappingPipIfIndex | readonly | Read-write access for this object is not required. | |
| ieee8021PbbCBPServiceMappingBVid | noaccess | Read-only and read-write access for this object are optional. | |
| ieee8021PbbCBPServiceMappingDefaultBackboneDest | noaccess | Read-only and read-write access for this object are optional. | |
| ieee8021PbbCBPServiceMappingLocalSid | noaccess | Read-only and read-write access for this object are optional. |