IEEE8021-PB-MIB Table View

A table used in a CEP to create the mapping between a C-VID
and a service represented by an S-VID.
          
Note that the component ID of entries in this table must refer
to the S-VLAN component of a Provider Edge Bridge and the Port
Number must refer to the port number of the Customer Edge Port
associated with that Provider Edge Bridge.
          
Entries in this table must be persistent over power up
restart/reboot.

ieee8021PbCVidRegistrationEntry row .1.3.111.2.802.1.1.5.1.2.1

An element of the C-VID registration table accessed by PB
C-VLAN component, Customer Edge Port Bridge Port number, and
C-VID. Each element contains the mapping between a C-VID and
the S-VID which carries the service an…

Indexes

IEEE8021-BRIDGE-MIBieee8021BridgeBasePortComponentId IEEE8021-BRIDGE-MIBieee8021BridgeBasePort ieee8021PbCVidRegistrationCVid

Column	Syntax	OID
ieee8021PbCVidRegistrationCVid C-VID of this C-VID registration entry.	Q-BRIDGE-MIBVlanId Type Constraints: range: 1..4094	.1.3.111.2.802.1.1.5.1.2.1.1
ieee8021PbCVidRegistrationSVid S-VID for this C-VID registration entry.	Q-BRIDGE-MIBVlanIdr/w Type Constraints: range: 1..4094	.1.3.111.2.802.1.1.5.1.2.1.2
ieee8021PbCVidRegistrationUntaggedPep A flag indicating if this C-VID should be carried untagged at the PEP. A value of true(1) means untagged.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.111.2.802.1.1.5.1.2.1.3
ieee8021PbCVidRegistrationUntaggedCep A flag indicating if this C-VID should be carried untagged at the CEP. A value of true(1) means untagged.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.111.2.802.1.1.5.1.2.1.4
ieee8021PbCVidRegistrationRowStatus This indicates the status of an entry in this table, and is used to create/delete entries. The value of ieee8021PbCVidRegistrationSVid must be set before an entry in this table can be made valid. …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.111.2.802.1.1.5.1.2.1.5

A Provider Edge Port (PEP) table which indicate the subset of
parameters needed for each PEP.

ieee8021PbEdgePortEntry row .1.3.111.2.802.1.1.5.1.3.1

An entry in the PEP table indexed by ComponentID and S-VID and
containing parameters used to configure ingress filtering on
the PEP, thus affecting traffic transiting from the provider
network to the customer edge port.…

Indexes

IEEE8021-BRIDGE-MIBieee8021BridgeBasePortComponentId IEEE8021-BRIDGE-MIBieee8021BridgeBasePort ieee8021PbEdgePortSVid

Column	Syntax	OID
ieee8021PbEdgePortSVid The 12 bit S-VID associated with the PEP.	Q-BRIDGE-MIBVlanId Type Constraints: range: 1..4094	.1.3.111.2.802.1.1.5.1.3.1.1
ieee8021PbEdgePortPVID A 12-bit C-VID to be used for untagged frames received at the Provider Edge Port.	Q-BRIDGE-MIBVlanIdr/w Type Constraints: range: 1..4094	.1.3.111.2.802.1.1.5.1.3.1.2
ieee8021PbEdgePortDefaultUserPriority An integer range 0-7 to be used for untagged frames received at the Provider Edge Port.	IEEE8021-TC-MIBIEEE8021PriorityValuer/w Type Constraints: range: 0..7	.1.3.111.2.802.1.1.5.1.3.1.3
ieee8021PbEdgePortAcceptableFrameTypes the Acceptable Frame Types for frames received at the PEP. The permissible values for the parameter are: 1) Admit all frames; 2) Admit only untagged and Priority-tagged frames; 3) Admit only VLAN-tagged fram…	IEEE8021-TC-MIBIEEE8021PortAcceptableFrameTypesr/w Type Values: 1 admitAll 2 admitUntaggedAndPriority 3 admitTagged	.1.3.111.2.802.1.1.5.1.3.1.4
ieee8021PbEdgePortEnableIngressFiltering Filtering parameter for frames received at the PEP. The permissible values for the parameter are: true(1) Enabled; false(2) Disabled.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.111.2.802.1.1.5.1.3.1.5

The priority regeneration table for this PEP.

ieee8021PbServicePriorityRegenerationEntry row .1.3.111.2.802.1.1.5.1.4.1

An element of the PEP priority regeneration table indexed
by Component ID, Bridge Port number, S-VID, and received
priority. Each element contains the regenerated priority.

Note that the component ID of en…

Indexes

IEEE8021-BRIDGE-MIBieee8021BridgeBasePortComponentId IEEE8021-BRIDGE-MIBieee8021BridgeBasePort ieee8021PbServicePriorityRegenerationSVid ieee8021PbServicePriorityRegenerationReceivedPriority

Column	Syntax	OID
ieee8021PbServicePriorityRegenerationSVid S-VID for this regeneration table entry.	Q-BRIDGE-MIBVlanId Type Constraints: range: 1..4094	.1.3.111.2.802.1.1.5.1.4.1.1
ieee8021PbServicePriorityRegenerationReceivedPriority Received priority for this regeneration table entry.	IEEE8021-TC-MIBIEEE8021PriorityValue Type Constraints: range: 0..7	.1.3.111.2.802.1.1.5.1.4.1.2
ieee8021PbServicePriorityRegenerationRegeneratedPriority The regenerated priority contained in this regeneration table entry.	IEEE8021-TC-MIBIEEE8021PriorityValuer/w Type Constraints: range: 0..7	.1.3.111.2.802.1.1.5.1.4.1.3

This table is used for dynamic creation and deletion of
Customer Network Ports on S-VLAN components or I-components.
Creation of an entry in this table will implicitly also
create a corresponding entry in the ieee8021BridgeBasePortTable.
          
Entries in this table must be persistent across reinitializations
of the management system.

ieee8021PbCnpEntry row .1.3.111.2.802.1.1.5.1.5.1

Represents a dynamically created Customer Network Port.

Indexes

IEEE8021-BRIDGE-MIBieee8021BridgeBasePortComponentId IEEE8021-BRIDGE-MIBieee8021BridgeBasePort

Column	Syntax	OID
ieee8021PbCnpCComponentId The component ID of the C-Vlan component if this is an internal customer network port. The value must be 0 for an external customer network port. This value must be consistent with the value of the corre…	IEEE8021-TC-MIBIEEE8021PbbComponentIdentifierOrZeror/w Type Constraints: range: 0..4294967295	.1.3.111.2.802.1.1.5.1.5.1.1
ieee8021PbCnpSVid The S-VID for service for an internal customer network port. For an external port, this value must be 0. This value must be consistent with the value of the corresponding instance of ieee8021PbCnpCCompone…	Q-BRIDGE-MIBVlanIdOrNoner/w Type Constraints: range: 0..4094	.1.3.111.2.802.1.1.5.1.5.1.2
ieee8021PbCnpRowStatus This object is used for creation/deletion of entries in this table. All columns in this table must have valid values before this object can be set to active(1). While the value of this obje…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.111.2.802.1.1.5.1.5.1.3

This table is used for dynamic creation and deletion of
Provider Network Ports on S-VLAN components or B-components.
Creation of an entry in this table will implicitly also
create a corresponding entry in the ieee8021BridgeBasePortTable.
          
Entries in this table must be persistent across reinitializations
of the management system.

ieee8021PbPnpEntry row .1.3.111.2.802.1.1.5.1.6.1

Represents a dynamically created Provider Network Port.

Indexes

IEEE8021-BRIDGE-MIBieee8021BridgeBasePortComponentId IEEE8021-BRIDGE-MIBieee8021BridgeBasePort

Column	Syntax	OID
ieee8021PbPnpRowStatus This object is used for creation/deletion of entries in this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.111.2.802.1.1.5.1.6.1.1

This table is used to create Customer Edge Ports, CEPs, on a
provider edge Bridge.  It is indexed by the ComponentId of the
PEB's S-VLAN component and by the port number for the CEP.  Note that
the CEP's port number belongs to the set of port numbers
associated with the PEB's S-VLAN component.
          
Entries in this table must be persistent across reinitializations
of the management system.  However, note that some column values,
as noted below, may change across system reinitializations.

ieee8021PbCepEntry row .1.3.111.2.802.1.1.5.1.7.1

The entry of the ieee8021PbCepTable. Note that the component
index must refer to the S-VLAN component of a PEB, and that the port
number for the CEP is allocated from the port number space of
that S-VLAN component.

Indexes

IEEE8021-BRIDGE-MIBieee8021BridgeBasePortComponentId IEEE8021-BRIDGE-MIBieee8021BridgeBasePort

Column	Syntax	OID
ieee8021PbCepCComponentId This column is an implementation specific column that may be used to map the C component associated with this CEP to other tables within the system, such as the Entity MIB. This column may not be created or modified by…	IEEE8021-TC-MIBIEEE8021PbbComponentIdentifierOrZero Type Constraints: range: 0..4294967295	.1.3.111.2.802.1.1.5.1.7.1.1
ieee8021PbCepCepPortNumber This column is an implementation specific column that may be used to map the CEP to other tables within the system, for example the Entity MIB. This column may not be created or modified by management station action. …	IEEE8021-TC-MIBIEEE8021BridgePortNumberOrZero Type Constraints: range: 0..65535	.1.3.111.2.802.1.1.5.1.7.1.2
ieee8021PbCepRowStatus This indicates the status of the entry, and is used to create and delete entries in this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.111.2.802.1.1.5.1.7.1.3

This table is used to create Remote Customer Access Ports, on a
provider edge Bridge.  It is indexed by the ComponentId of the
PEB's S-VLAN component and by the port number for the RCAP.  Note that
the index port number belongs to the set of port numbers
associated with the PEB's primary S-VLAN component.
          
Entries in this table must be persistent across reinitializations
of the management agent.  However, note that some column values,
as noted below, may change across system reinitializations.

ieee8021PbRcapEntry row .1.3.111.2.802.1.1.5.1.8.1

The entry of the ieee8021PbRcapTable. Note that the component
index must refer to the primary S-VLAN component of a PEB, and that
the port number index for the RCAP is allocated from the port
number space of that S-VLA…

Indexes

IEEE8021-BRIDGE-MIBieee8021BridgeBasePortComponentId IEEE8021-BRIDGE-MIBieee8021BridgeBasePort

Column	Syntax	OID
ieee8021PbRcapSComponentId This column is an implmentation specific column that may be used to map the Port-mapping S-VLAN component associated with this RCAP to other tables within the system, such as the Entity MIB. This column may not be crea…	IEEE8021-TC-MIBIEEE8021PbbComponentIdentifierOrZero Type Constraints: range: 0..4294967295	.1.3.111.2.802.1.1.5.1.8.1.1
ieee8021PbRcapRcapPortNumber This column is an implementation specific column that may be used to map the RCAP to other tables within the system, for example the Entity MIB. This column may not be created or modified by management station action. …	IEEE8021-TC-MIBIEEE8021BridgePortNumberOrZero Type Constraints: range: 0..65535	.1.3.111.2.802.1.1.5.1.8.1.2
ieee8021PbRcapRowStatus This indicates the status of the entry, and is used to create and delete entries in this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.111.2.802.1.1.5.1.8.1.3

A table used in a Port-mapping S-VLAN component associated with
a Remote Customer Access Port to manage the mapping between
external S-VIDs and internal interfaces/S-VIDs.
          
Note that the component ID of entries in this table must refer
to the primary S-VLAN component of a Provider Edge Bridge and
the Port Number must refer to the port number of a Remote
Customer Access Port associated with that S-VLAN component.
          
Entries in this table must be persistent over power up
restart/reboot.

ieee8021PbIiEntry row .1.3.111.2.802.1.1.5.1.9.1

An element of the internal interface table accessed by PB
S-VLAN component ID, Remnote Customer Access Port Bridge Port
number, and external S-VID. Each element contains the mapping
between an external S-VID and the in…

Indexes

IEEE8021-BRIDGE-MIBieee8021BridgeBasePortComponentId IEEE8021-BRIDGE-MIBieee8021BridgeBasePort ieee8021PbIiExternalSVid

Column	Syntax	OID
ieee8021PbIiExternalSVid External S-VID for this internal interface table entry.	Q-BRIDGE-MIBVlanId Type Constraints: range: 1..4094	.1.3.111.2.802.1.1.5.1.9.1.1
ieee8021PbIiInternalPortNumber The port number for the internal port on the primary S-VLAN component. This port number is used in FDB entries that reference an RCSI. The port number of the Remote Customer Access Port can be used to id…	IEEE8021-TC-MIBIEEE8021BridgePortNumberOrZero Type Constraints: range: 0..65535	.1.3.111.2.802.1.1.5.1.9.1.2
ieee8021PbIiInternalPortType The port type of the internal port on the primary S-VLAN component. This indicates the type of RCSI as follows: providerNetworkPort(3) - Indicates a PNP (not an RCSI) customerNetworkPort(4) - In…	IEEE8021-TC-MIBIEEE8021BridgePortTyper/w Type Values: 1 none 2 customerVlanPort 3 providerNetworkPort 4 customerNetworkPort 5 customerEdgePort 6 customerBackbonePort 7 virtualInstancePort 8 dBridgePort 9 remoteCustomerAccessPort 10 stationFacingBridgePort 11 uplinkAccessPort 12 uplinkRelayPort	.1.3.111.2.802.1.1.5.1.9.1.3
ieee8021PbIiInternalSVid Internal S-VID for this external S-VID entry.	Q-BRIDGE-MIBVlanIdOrNoner/w Type Constraints: range: 0..4094	.1.3.111.2.802.1.1.5.1.9.1.4
ieee8021PbIiRowStatus This indicates the status of an entry in this table, and is used to create/delete entries. The value of ieee8021PbIiExternalSVid must be set before an entry in this table can be made valid.deprecated …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.111.2.802.1.1.5.1.9.1.5