IEEE8021-PB-MIB

        Provider Bridge MIB module.
        
Unless otherwise indicated, the references in this MIB
module are to IEEE Std 802.1Q.
        
Copyright (C) IEEE (2018).
This version of this MIB module is part of IEEE Std 802.1Q;
see the draft itself for full legal notices.
    
Source file
IEEE8021-PB-MIB
Last revised
Identity
ieee8021PbMib
Base OID
1.3.111.2.802.1.1.5
Net-SNMP examples using the rfc MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'IEEE8021-PB-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'IEEE8021-PB-MIB::ieee8021PbMib'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IEEE8021-PB-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IEEE8021-PB-MIB::ieee8021PbMib'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (55)
.1.3.111.2.802.1.1.5
.1.3.111.2.802.1.1.5.0
.1.3.111.2.802.1.1.5.1
.1.3.111.2.802.1.1.5.1.1
.1.3.111.2.802.1.1.5.1.1.1
.1.3.111.2.802.1.1.5.1.1.1.1
.1.3.111.2.802.1.1.5.1.1.1.2
.1.3.111.2.802.1.1.5.1.1.1.3
.1.3.111.2.802.1.1.5.1.2
.1.3.111.2.802.1.1.5.1.2.1
.1.3.111.2.802.1.1.5.1.2.1.1
.1.3.111.2.802.1.1.5.1.2.1.2
.1.3.111.2.802.1.1.5.1.2.1.3
.1.3.111.2.802.1.1.5.1.2.1.4
.1.3.111.2.802.1.1.5.1.2.1.5
.1.3.111.2.802.1.1.5.1.3
.1.3.111.2.802.1.1.5.1.3.1
.1.3.111.2.802.1.1.5.1.3.1.1
.1.3.111.2.802.1.1.5.1.3.1.2
.1.3.111.2.802.1.1.5.1.3.1.3
.1.3.111.2.802.1.1.5.1.3.1.4
.1.3.111.2.802.1.1.5.1.3.1.5
.1.3.111.2.802.1.1.5.1.4
.1.3.111.2.802.1.1.5.1.4.1
.1.3.111.2.802.1.1.5.1.4.1.1
.1.3.111.2.802.1.1.5.1.4.1.2
.1.3.111.2.802.1.1.5.1.4.1.3
.1.3.111.2.802.1.1.5.1.5
.1.3.111.2.802.1.1.5.1.5.1
.1.3.111.2.802.1.1.5.1.5.1.1
.1.3.111.2.802.1.1.5.1.5.1.2
.1.3.111.2.802.1.1.5.1.5.1.3
.1.3.111.2.802.1.1.5.1.6
.1.3.111.2.802.1.1.5.1.6.1
.1.3.111.2.802.1.1.5.1.6.1.1
.1.3.111.2.802.1.1.5.1.7
.1.3.111.2.802.1.1.5.1.7.1
.1.3.111.2.802.1.1.5.1.7.1.1
.1.3.111.2.802.1.1.5.1.7.1.2
.1.3.111.2.802.1.1.5.1.7.1.3
.1.3.111.2.802.1.1.5.1.8
.1.3.111.2.802.1.1.5.1.8.1
.1.3.111.2.802.1.1.5.1.8.1.1
.1.3.111.2.802.1.1.5.1.8.1.2
.1.3.111.2.802.1.1.5.1.8.1.3
.1.3.111.2.802.1.1.5.1.9
.1.3.111.2.802.1.1.5.1.9.1
.1.3.111.2.802.1.1.5.1.9.1.1
.1.3.111.2.802.1.1.5.1.9.1.2
.1.3.111.2.802.1.1.5.1.9.1.3
.1.3.111.2.802.1.1.5.1.9.1.4
.1.3.111.2.802.1.1.5.1.9.1.5
.1.3.111.2.802.1.1.5.2
.1.3.111.2.802.1.1.5.2.1
.1.3.111.2.802.1.1.5.2.2
Dependencies (19) 6 direct · 13 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Conformance Groups (10)
The collection of objects used to represent a PB
C-VID/S-VID translation.
.1.3.111.2.802.1.1.5.2.1.1
The collection of objects used to represent a CEP translation.
.1.3.111.2.802.1.1.5.2.1.2
The collection of objects user to represent a PEP.
.1.3.111.2.802.1.1.5.2.1.3
A regenerated priority value for a PEP.
.1.3.111.2.802.1.1.5.2.1.4
A set of objects used for dynamic creation and deletion
of customer network ports.
.1.3.111.2.802.1.1.5.2.1.5
A set of objects used for dynamic creation and deletion
of provider network ports.
.1.3.111.2.802.1.1.5.2.1.6
A set of objects used for dynamic creation and deletion
of customer edge ports.
.1.3.111.2.802.1.1.5.2.1.7
A set of objects used for dynamic creation and deletion
of remote customer access ports.
.1.3.111.2.802.1.1.5.2.1.8
A set of objects used for dynamic creation and deletion
of internal interfaces on a Port-mapping S-VLAN component.
.1.3.111.2.802.1.1.5.2.1.9
A set of objects used for dynamic creation and deletion
of remote customer access ports.
.1.3.111.2.802.1.1.5.2.1.10
Compliance Statements (2)

OID .1.3.111.2.802.1.1.5.2.2.1
The compliance statement for device support of Provider
Bridge services.
Required groups
mandatory ieee8021PbVidTranslationGroup
mandatory ieee8021PbCVidRegistrationGroup
mandatory ieee8021PbEdgePortGroup
mandatory ieee8021PbServicePriorityRegenerationGroup
optional ieee8021PbDynamicCnpGroup This group is optional and supports dynamic creation
and deletion of customer network ports.
optional ieee8021PbDynamicPnpGroup This group is optional and supports dynamic creation
and deletion of provider network ports.
optional ieee8021PbDynamicCepGroup This group is optional and supports dynamic creation
and deletion of customer edge ports.
optional ieee8021PbDynamicRcapGroup This group is optional and supports dynamic creation
and deletion of remote customer access ports.
optional ieee8021PbInternalInterfaceGroup This group is optional and supports dynamic creation
and deletion of internal interfaces on Port-mapping
S-VLAN components.

OID .1.3.111.2.802.1.1.5.2.2.2
The compliance statement for device support of Provider
Bridge services.
Required groups
mandatory ieee8021PbCVidRegistrationGroup
mandatory ieee8021PbEdgePortGroup
mandatory ieee8021PbServicePriorityRegenerationGroup
optional ieee8021PbDynamicCnpGroup This group is optional and supports dynamic creation
and deletion of customer network ports.
optional ieee8021PbDynamicPnpGroup This group is optional and supports dynamic creation
and deletion of provider network ports.
optional ieee8021PbDynamicCepGroup This group is optional and supports dynamic creation
and deletion of customer edge ports.
optional ieee8021PbDynamicRcapV2Group This group is optional and supports dynamic creation
and deletion of remote customer access ports.
optional ieee8021PbInternalInterfaceGroup This group is optional and supports dynamic creation
and deletion of internal interfaces on Port-mapping
S-VLAN components.