IEEE8021-DDCFM-MIB
module for managing Data Dependent and Data Driven
Connectivity Fault Management.
Unless otherwise indicated, the references in this MIB
module are to IEEE Std 802.1Q.
Copyright (C) IEEE (2018).
This version of this MIB module is part of IEEE Std 802.1Q;
see the draft itself for full legal notices.
- Source file
IEEE8021-DDCFM-MIB- Last revised
- Identity
ieee8021DdcfmMIB- Base OID
1.3.111.2.802.1.1.11
Imported Objects
| IEEE8021-CFM-MIB | Dot1agCfmMDLevel Dot1agCfmMpDirection |
| IEEE8021-TC-MIB | ieee802dot1mibs |
| IF-MIB | InterfaceIndex |
| Q-BRIDGE-MIB | VlanIdOrNone |
| SNMPv2-CONF | MODULE-COMPLIANCE (no object page) OBJECT-GROUP (no object page) |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY (no object page) OBJECT-TYPE (no object page) Unsigned32 |
| SNMPv2-TC | MacAddress RowStatus TruthValue |
Net-SNMP examples using the rfc MIB directory Show commands
These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.
Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'IEEE8021-DDCFM-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'IEEE8021-DDCFM-MIB::ieee8021DdcfmMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IEEE8021-DDCFM-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IEEE8021-DDCFM-MIB::ieee8021DdcfmMIB'
Objects (70)
Showing 70 of 70 objects
Object legend
Object type
Icons distinguish tables, entry rows, columns, scalars, and structural nodes.
SNMPv2-TCTruthValue
Syntax
Blue badges identify the value syntax. Connected badges read as defining module and convention.
IF-MIBifIndex
Table index
Green identifies an index object; yellow names its module when the index is defined elsewhere.
r/w
deprecated
obsolete
Access and status
r/w means read-write. Grey labels mark definitions retained for compatibility.
OBS ✓
Observium use
The indicator appears only when Observium directly references that object.
ifOperStatus
.1.3.6.1.2.1…
Names and OIDs
Object names link to their detail pages. Hover or focus a linked name or badge for available definition details.
.1.3.111.2.802.1.1.11 |
||
.1.3.111.2.802.1.1.11.1 |
||
.1.3.111.2.802.1.1.11.1.1 |
||
.1.3.111.2.802.1.1.11.1.1.1 |
||
.1.3.111.2.802.1.1.11.1.1.1.1 |
||
.1.3.111.2.802.1.1.11.1.1.1.1.1 |
||
.1.3.111.2.802.1.1.11.1.1.1.1.2 |
||
.1.3.111.2.802.1.1.11.1.1.1.1.3 |
||
.1.3.111.2.802.1.1.11.1.1.1.1.4 |
||
.1.3.111.2.802.1.1.11.1.1.1.1.5 |
||
.1.3.111.2.802.1.1.11.1.1.1.1.6 |
||
.1.3.111.2.802.1.1.11.1.1.1.1.7 |
||
.1.3.111.2.802.1.1.11.1.1.1.1.8 |
||
.1.3.111.2.802.1.1.11.1.1.1.1.9 |
||
.1.3.111.2.802.1.1.11.1.2 |
||
.1.3.111.2.802.1.1.11.1.2.1 |
||
.1.3.111.2.802.1.1.11.1.2.1.1 |
||
.1.3.111.2.802.1.1.11.1.2.1.1.1 |
||
.1.3.111.2.802.1.1.11.1.2.1.1.10 |
||
|
Integer32
|
.1.3.111.2.802.1.1.11.1.2.1.1.11 |
|
.1.3.111.2.802.1.1.11.1.2.1.1.12 |
||
.1.3.111.2.802.1.1.11.1.2.1.1.13 |
||
.1.3.111.2.802.1.1.11.1.2.1.1.14 |
||
.1.3.111.2.802.1.1.11.1.2.1.1.15 |
||
|
secondsSNMPv2-SMIUnsigned32
|
.1.3.111.2.802.1.1.11.1.2.1.1.16 |
|
.1.3.111.2.802.1.1.11.1.2.1.1.17 |
||
.1.3.111.2.802.1.1.11.1.2.1.1.18 |
||
.1.3.111.2.802.1.1.11.1.2.1.1.2 |
||
.1.3.111.2.802.1.1.11.1.2.1.1.3 |
||
.1.3.111.2.802.1.1.11.1.2.1.1.4 |
||
|
OctetString
|
.1.3.111.2.802.1.1.11.1.2.1.1.5 |
|
|
milisecondsSNMPv2-SMIUnsigned32
|
.1.3.111.2.802.1.1.11.1.2.1.1.6 |
|
.1.3.111.2.802.1.1.11.1.2.1.1.7 |
||
.1.3.111.2.802.1.1.11.1.2.1.1.8 |
||
.1.3.111.2.802.1.1.11.1.2.1.1.9 |
||
.1.3.111.2.802.1.1.11.1.3 |
||
.1.3.111.2.802.1.1.11.1.3.1 |
||
.1.3.111.2.802.1.1.11.1.3.1.1 |
||
.1.3.111.2.802.1.1.11.1.3.1.1.1 |
||
.1.3.111.2.802.1.1.11.1.3.1.1.2 |
||
.1.3.111.2.802.1.1.11.1.3.1.1.3 |
||
.1.3.111.2.802.1.1.11.1.4 |
||
.1.3.111.2.802.1.1.11.1.4.1 |
||
.1.3.111.2.802.1.1.11.1.4.1.1 |
||
.1.3.111.2.802.1.1.11.1.4.1.1.1 |
||
|
integerSNMPv2-SMIUnsigned32
|
.1.3.111.2.802.1.1.11.1.4.1.1.10 |
|
.1.3.111.2.802.1.1.11.1.4.1.1.11 |
||
.1.3.111.2.802.1.1.11.1.4.1.1.2 |
||
.1.3.111.2.802.1.1.11.1.4.1.1.3 |
||
.1.3.111.2.802.1.1.11.1.4.1.1.4 |
||
.1.3.111.2.802.1.1.11.1.4.1.1.5 |
||
.1.3.111.2.802.1.1.11.1.4.1.1.6 |
||
|
secondsSNMPv2-SMIUnsigned32
|
.1.3.111.2.802.1.1.11.1.4.1.1.7 |
|
.1.3.111.2.802.1.1.11.1.4.1.1.8 |
||
|
secondsSNMPv2-SMIUnsigned32
|
.1.3.111.2.802.1.1.11.1.4.1.1.9 |
|
.1.3.111.2.802.1.1.11.1.5 |
||
.1.3.111.2.802.1.1.11.1.5.1 |
||
.1.3.111.2.802.1.1.11.1.5.1.1 |
||
.1.3.111.2.802.1.1.11.1.5.1.1.1 |
||
.1.3.111.2.802.1.1.11.1.5.1.1.2 |
||
.1.3.111.2.802.1.1.11.1.5.1.1.3 |
||
.1.3.111.2.802.1.1.11.1.5.1.1.4 |
||
.1.3.111.2.802.1.1.11.1.5.1.1.5 |
||
|
secondsSNMPv2-SMIUnsigned32
|
.1.3.111.2.802.1.1.11.1.5.1.1.6 |
|
.1.3.111.2.802.1.1.11.1.5.1.1.7 |
||
|
secondsSNMPv2-SMIUnsigned32
|
.1.3.111.2.802.1.1.11.1.5.1.1.8 |
|
.1.3.111.2.802.1.1.11.1.5.1.1.9 |
||
.1.3.111.2.802.1.1.11.2 |
||
.1.3.111.2.802.1.1.11.2.1 |
||
.1.3.111.2.802.1.1.11.2.2 |
Dependencies (21) 7 direct · 14 transitive Show tree and compile order Hide dependency details
Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.
Dependency tree
Dependency-first compile order
- SNMPv2-SMIrfc
- SNMPv2-TCrfc
- IEEE8021-TC-MIBrfc
- IANAifType-MIBrfc
- SNMPv2-CONFrfc
- SNMPv2-MIBrfc
- IF-MIBrfc
- IANA-ADDRESS-FAMILY-NUMBERS-MIBrfc
- RMON-MIBrfc
- RFC-1212rfc
- RFC1155-SMIrfc
- RFC1213-MIBrfc
- RFC1271-MIBrfc
- TOKEN-RING-RMON-MIBrfc
- RMON2-MIBrfc
- SNMP-FRAMEWORK-MIBrfc
- LLDP-MIBrfc
- BRIDGE-MIBrfc
- P-BRIDGE-MIBrfc
- Q-BRIDGE-MIBrfc
- IEEE8021-CFM-MIBrfc
- IEEE8021-DDCFM-MIBrfcselected
Conformance Groups (5)
Compliance Statements (1)
OID
.1.3.111.2.802.1.1.11.2.1.1The compliance statement for support of the DDCFM MIB module.
Required groups
| mandatory | ieee8021DdcfmStackGroup | |
| mandatory | ieee8021DdcfmRrGroup | |
| mandatory | ieee8021DdcfmRFMReceiverGroup | |
| mandatory | ieee8021DdcfmDrGroup | |
| mandatory | ieee8021DdcfmSoGroup |
Object refinements
| Object | Access | Syntax | Description |
|---|---|---|---|
| ieee8021DdcfmRrRowStatus |
active(1), notInService(2)
|
Support for createAndWait is not required. | |
| ieee8021DdcfmRFMRowStatus |
active(1), notInService(2)
|
Support for createAndWait is not required. | |
| ieee8021DdcfmDrRowStatus |
active(1), notInService(2)
|
Support for createAndWait is not required. | |
| ieee8021DdcfmSoRowStatus |
active(1), notInService(2)
|
Support for createAndWait is not required. |