IEEE8021-CFM-V2-MIB
Connectivity Fault Management V2 module.
Unless otherwise indicated, the references in this MIB
module are to IEEE Std 802.1Q.
Copyright (C) IEEE (2018).
This version of this MIB module is part of IEEE Std 802.1Q;
see the draft itself for full legal notices.
- Source file
IEEE8021-CFM-V2-MIB- Last revised
- Identity
ieee8021CfmV2Mib- Base OID
1.3.111.2.802.1.1.7
Imported Objects
Net-SNMP examples using the rfc MIB directory Show commands
These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.
Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'IEEE8021-CFM-V2-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'IEEE8021-CFM-V2-MIB::ieee8021CfmV2Mib'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IEEE8021-CFM-V2-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IEEE8021-CFM-V2-MIB::ieee8021CfmV2Mib'
Objects (42)
Showing 42 of 42 objects
Object legend
Object type
Icons distinguish tables, entry rows, columns, scalars, and structural nodes.
SNMPv2-TCTruthValue
Syntax
Blue badges identify the value syntax. Connected badges read as defining module and convention.
IF-MIBifIndex
Table index
Green identifies an index object; yellow names its module when the index is defined elsewhere.
r/w
deprecated
obsolete
Access and status
r/w means read-write. Grey labels mark definitions retained for compatibility.
OBS ✓
Observium use
The indicator appears only when Observium directly references that object.
ifOperStatus
.1.3.6.1.2.1…
Names and OIDs
Object names link to their detail pages. Hover or focus a linked name or badge for available definition details.
.1.3.111.2.802.1.1.7 |
||
.1.3.111.2.802.1.1.8.1.1.2 |
||
.1.3.111.2.802.1.1.8.1.1.2.1 |
||
.1.3.111.2.802.1.1.8.1.1.2.1.1 |
||
.1.3.111.2.802.1.1.8.1.1.2.1.2 |
||
.1.3.111.2.802.1.1.8.1.1.2.1.3 |
||
.1.3.111.2.802.1.1.8.1.1.2.1.4 |
||
.1.3.111.2.802.1.1.8.1.1.2.1.5 |
||
.1.3.111.2.802.1.1.8.1.1.2.1.6 |
||
.1.3.111.2.802.1.1.8.1.1.2.1.7 |
||
.1.3.111.2.802.1.1.8.1.1.2.1.8 |
||
.1.3.111.2.802.1.1.8.1.1.2.1.9 |
||
.1.3.111.2.802.1.1.8.1.2.5 |
||
.1.3.111.2.802.1.1.8.1.2.5.1 |
||
.1.3.111.2.802.1.1.8.1.2.5.1.1 |
||
.1.3.111.2.802.1.1.8.1.2.5.1.2 |
||
.1.3.111.2.802.1.1.8.1.2.5.1.3 |
||
.1.3.111.2.802.1.1.8.1.2.5.1.4 |
||
.1.3.111.2.802.1.1.8.1.2.5.1.5 |
||
.1.3.111.2.802.1.1.8.1.2.5.1.6 |
||
.1.3.111.2.802.1.1.8.1.2.5.1.7 |
||
.1.3.111.2.802.1.1.8.1.3.2 |
||
.1.3.111.2.802.1.1.8.1.3.2.1 |
||
.1.3.111.2.802.1.1.8.1.3.2.1.1 |
||
.1.3.111.2.802.1.1.8.1.3.2.1.3 |
||
.1.3.111.2.802.1.1.8.1.3.2.1.5 |
||
.1.3.111.2.802.1.1.8.1.3.2.1.6 |
||
.1.3.111.2.802.1.1.8.1.4.2 |
||
.1.3.111.2.802.1.1.8.1.4.2.1 |
||
.1.3.111.2.802.1.1.8.1.4.2.1.1 |
||
.1.3.111.2.802.1.1.8.1.4.2.1.2 |
||
.1.3.111.2.802.1.1.8.1.4.2.1.3 |
||
.1.3.111.2.802.1.1.8.1.4.2.1.4 |
||
.1.3.111.2.802.1.1.8.1.6.4 |
||
.1.3.111.2.802.1.1.8.1.6.4.1 |
||
.1.3.111.2.802.1.1.8.1.6.4.1.1 |
||
.1.3.111.2.802.1.1.8.1.6.4.1.2 |
||
.1.3.111.2.802.1.1.8.1.6.4.1.3 |
||
.1.3.111.2.802.1.1.8.1.6.4.1.4 |
||
.1.3.111.2.802.1.1.8.1.6.4.1.5 |
||
.1.3.111.2.802.1.1.8.1.6.4.1.6 |
||
.1.3.111.2.802.1.1.8.1.6.4.1.7 |
Dependencies (21) 6 direct · 15 transitive Show tree and compile order Hide dependency details
Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.
Dependency tree
Dependency-first compile order
- SNMPv2-SMIrfc
- SNMPv2-TCrfc
- IEEE8021-TC-MIBrfc
- IANAifType-MIBrfc
- SNMPv2-CONFrfc
- SNMPv2-MIBrfc
- IF-MIBrfc
- IANA-ADDRESS-FAMILY-NUMBERS-MIBrfc
- RMON-MIBrfc
- RFC-1212rfc
- RFC1155-SMIrfc
- RFC1213-MIBrfc
- RFC1271-MIBrfc
- TOKEN-RING-RMON-MIBrfc
- RMON2-MIBrfc
- SNMP-FRAMEWORK-MIBrfc
- LLDP-MIBrfc
- BRIDGE-MIBrfc
- P-BRIDGE-MIBrfc
- Q-BRIDGE-MIBrfc
- IEEE8021-CFM-MIBrfc
- IEEE8021-CFM-V2-MIBrfcselected
Conformance Groups (5)
|
Objects for the Stack group.
|
.1.3.111.2.802.1.1.8.2.2.12
|
|
|
ieee8021CfmMaCompPrimarySelectorType ieee8021CfmMaCompPrimarySelectorOrNone ieee8021CfmMaCompMhfCreation ieee8021CfmMaCompIdPermission ieee8021CfmMaCompRowStatus ieee8021CfmMaCompNumberOfVids
Objects for the MA group.
|
.1.3.111.2.802.1.1.8.2.2.13
|
|
|
ieee8021CfmDefaultMdStatus ieee8021CfmDefaultMdLevel ieee8021CfmDefaultMdMhfCreation ieee8021CfmDefaultMdIdPermission
Objects for the Default MD Level group.
|
.1.3.111.2.802.1.1.8.2.2.14
|
|
|
Objects for the VLAN ID group.
|
.1.3.111.2.802.1.1.8.2.2.15
|
|
|
Objects for the CFM Configuration Error List Group.
|
.1.3.111.2.802.1.1.8.2.2.16
|
Compliance Statements (2)
OID
.1.3.111.2.802.1.1.8.2.1.2The compliance statement for support of the CFM MIB module.
Required groups
| mandatory | ieee8021CfmStackGroup | |
| mandatory | ieee8021CfmMaGroup | |
| mandatory | ieee8021CfmDefaultMdGroup | |
| mandatory | ieee8021CfmConfigErrorListGroup | |
| mandatory | IEEE8021-CFM-MIB::dot1agCfmMdGroup | |
| mandatory | IEEE8021-CFM-MIB::dot1agCfmMepGroup | |
| mandatory | IEEE8021-CFM-MIB::dot1agCfmMepDbGroup | |
| mandatory | IEEE8021-CFM-MIB::dot1agCfmNotificationsGroup | |
| mandatory | IEEE8021-CFM-MIB::ieee8021CfmDefaultMdDefGroup | |
| mandatory | IEEE8021-CFM-MIB::ieee8021CfmMaNetGroup | |
| optional | ieee8021CfmVlanIdGroup | The VLAN ID group is optional. |
Object refinements
| Object | Access | Syntax | Description |
|---|---|---|---|
| ieee8021CfmMaCompRowStatus |
active(1), notInService(2)
|
Support for createAndWait is not required. | |
| ieee8021CfmVlanRowStatus |
active(1), notInService(2)
|
Support for createAndWait is not required. | |
| IEEE8021-CFM-MIBdot1agCfmMepLbrBadMsdu | noaccess | The dot1agCfmMepLbrBadMsdu variable is optional. It MUST not be present if the system cannot compare a received LBR to the corresponding LBM. |
|
| IEEE8021-CFM-MIBdot1agCfmMdRowStatus |
active(1), notInService(2)
|
Support for createAndWait is not required. | |
| IEEE8021-CFM-MIBdot1agCfmMaNetRowStatus |
active(1), notInService(2)
|
Support for createAndWait is not required. | |
| IEEE8021-CFM-MIBdot1agCfmMaMepListRowStatus |
active(1), notInService(2)
|
Support for createAndWait is not required. | |
| IEEE8021-CFM-MIBdot1agCfmMepRowStatus |
active(1), notInService(2)
|
Support for createAndWait is not required. |
OID
.1.3.111.2.802.1.1.8.2.1.3The compliance statement for support of the CFM MIB for
systems that support PBB-TE.
systems that support PBB-TE.
Required groups
| mandatory | ieee8021CfmStackGroup | |
| mandatory | ieee8021CfmMaGroup | |
| mandatory | ieee8021CfmDefaultMdGroup | |
| mandatory | ieee8021CfmConfigErrorListGroup | |
| mandatory | IEEE8021-CFM-MIB::dot1agCfmMdGroup | |
| mandatory | IEEE8021-CFM-MIB::dot1agCfmMepGroup | |
| mandatory | IEEE8021-CFM-MIB::dot1agCfmMepDbGroup | |
| mandatory | IEEE8021-CFM-MIB::dot1agCfmNotificationsGroup | |
| mandatory | IEEE8021-CFM-MIB::ieee8021CfmDefaultMdDefGroup | |
| mandatory | IEEE8021-CFM-MIB::ieee8021CfmMaNetGroup | |
| mandatory | IEEE8021-CFM-MIB::ieee8021CfmPbbTeExtensionGroup | |
| optional | ieee8021CfmVlanIdGroup | The VLAN ID group is optional. |
| optional | IEEE8021-CFM-MIB::ieee8021CfmPbbTeTrafficBitGroup |
The objects needed to support the traffic bit are optional as traffic bit support, itself, is optional. |
Object refinements
| Object | Access | Syntax | Description |
|---|---|---|---|
| ieee8021CfmMaCompRowStatus |
active(1), notInService(2)
|
Support for createAndWait is not required. | |
| ieee8021CfmVlanRowStatus |
active(1), notInService(2)
|
Support for createAndWait is not required. | |
| IEEE8021-CFM-MIBdot1agCfmMepLbrBadMsdu | noaccess | The dot1agCfmMepLbrBadMsdu variable is optional. It MUST not be present if the system cannot compare a received LBR to the corresponding LBM. |
|
| IEEE8021-CFM-MIBdot1agCfmMdRowStatus |
active(1), notInService(2)
|
Support for createAndWait is not required. | |
| IEEE8021-CFM-MIBdot1agCfmMaNetRowStatus |
active(1), notInService(2)
|
Support for createAndWait is not required. | |
| IEEE8021-CFM-MIBdot1agCfmMaMepListRowStatus |
active(1), notInService(2)
|
Support for createAndWait is not required. | |
| IEEE8021-CFM-MIBdot1agCfmMepRowStatus |
active(1), notInService(2)
|
Support for createAndWait is not required. |