IEEE-802DOT17-RPR-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
19
Rows
19
Columns
451

rprIfTable

table
.1.0.8802.17.1.1.1.1.1 · 1 row entry · 21 columns
Open in standard view
Uses the rfc variant from /opt/observium/mibs/rfc.
Command help
Walk rprIfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IEEE-802DOT17-RPR-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IEEE-802DOT17-RPR-MIB::rprIfTable' 
The RPR interface table, extension to the ifTable.
          
All read-write attributes in this table are non-volatile,
i.e. will be retained across system reset.
rprIfEntry row .1.0.8802.17.1.1.1.1.1.1
One such entry for every interface in the ifTable which
has an ifType of RPR interface.
Indexes
Column Syntax OID
rprIfIndex
The ifIndex of this RPR interface.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.0.8802.17.1.1.1.1.1.1.1
rprIfStationsOnRing
The number of stations on the RPR ring.
When the operStatus of the interface is down the value is 1.
Unsigned32
Constraints:
range: 1-255
 .1.0.8802.17.1.1.1.1.1.1.2
rprIfReversionMode
The reversion mode of the MAC,
False for non-revertive
True for revertive.

Revertive station will return to idle state after
WTR interval expires.

Default value for reversion mode is true.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.0.8802.17.1.1.1.1.1.1.3
rprIfProtectionWTR
Indicates the length of time in seconds, to remain in the
protection state, after the cause of an automatic
protection is removed. This mechanism prevents protection
switch oscillations.

Default value for…
SecondsUnsigned32r/w
Constraints:
range: 0-1440
 .1.0.8802.17.1.1.1.1.1.1.4
rprIfProtectionFastTimer
Indicates the protection messages fast timer value in 1 ms units.
The fast timer is used for protection protocols.

Default value for fast timer protection messages is 10 ms.
millisecondsUnsigned32r/w
Constraints:
range: 1-20
 .1.0.8802.17.1.1.1.1.1.1.5
rprIfProtectionSlowTimer
Indicates the protection slow timer value in 50 ms units.
The slow timer is used for topology and protection protocols.

Default value for slow timer protection and topology messages
is 20 units of 50 ms, …
50 millisecondsUnsigned32r/w
Constraints:
range: 1-200
 .1.0.8802.17.1.1.1.1.1.1.6
rprIfAtdTimer
Indicates the timer period for ATD message transmissions.

Default value is 20 units of 50 ms, i.e. 1sec.
50 millisecondsUnsigned32r/w
Constraints:
range: 1-200
 .1.0.8802.17.1.1.1.1.1.1.7
rprIfKeepaliveTimeout
Indicates the timer to declare keepalive timeout, multiples
of 1 millisecond.

Default value for keepalive timeout is 3 ms.
millisecondsUnsigned32r/w
Constraints:
range: 2-50
 .1.0.8802.17.1.1.1.1.1.1.8
rprIfFairnessAggressive
Indicates whether the selected RPR fairness algorithm is
aggressive or conservative.

If true, the selected fairness mode is aggressive.
If false, the selected fairness mode is conservative.
…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.0.8802.17.1.1.1.1.1.1.9
rprIfPtqSize
The size in bytes of the Primary Transit Queue per ringlet
supported by this RPR MAC.
BytesSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.0.8802.17.1.1.1.1.1.1.10
rprIfStqSize
The size in bytes of the Secondary Transit Queue per ringlet
supported by this RPR MAC.
BytesSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.0.8802.17.1.1.1.1.1.1.11
rprIfSTQFullThreshold
A level of STQ occupancy at or above which the STQ
is almost full.

This attribute specifies the full threshold location
in MTU units below the STQ size.
The range is [stqHighThreshold + mtuSize, sizeSTQ …
MTUsSNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.0.8802.17.1.1.1.1.1.1.12
rprIfIdleThreshold
Indicates that a MAC is experiencing an adverse rate
mismatch. When the PTQ depth exceeds this value,
the incoming link is considered adversely rate mismatched.

This attribute specifies the idle-threshol…
MTUsSNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.0.8802.17.1.1.1.1.1.1.13
rprIfSesThreshold
Indicates the number of E-RPR errors to declare
a second as SES-RPR

The default value is the rounded integer of
0.000001 * (lineRate * advertisementRatio).
Unsigned32r/w
Constraints:
range: 1-512
 .1.0.8802.17.1.1.1.1.1.1.14
rprIfWrapConfig
Indicates the configured protection mode,
steering or wrapping, in a MAC that supports both modes.

If wrap configured bit is set, the station will
perform wrap protection during ring failures.
…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.0.8802.17.1.1.1.1.1.1.15
rprIfJumboFramePreferred
Indicates the preference of the manager to support jumbo frame
in a MAC that supports jumbo frame.

The station advertises the 'logical and' of rprIfJumboFramePreferred
and jumbo capable bit in the rprIfMa…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.0.8802.17.1.1.1.1.1.1.16
rprIfMacOperModes
The summary of the Mac operational modes.
if strictOrder is set, the MAC operates in strict order mode.
if dropBadFcs is set, frames with bad FCS are dropped.
Bits
Enumerated Values:
0strictOrder
1dropBadFcs
 .1.0.8802.17.1.1.1.1.1.1.17
rprIfRingOperModes
The summary of the ring operational modes
collected through the topology discovery protocol.

If at least one station doesn't support jumbo frames,
the jumboFrame bit in this attribute is set to false.
On…
Bits
Enumerated Values:
0jumboFrames
1wrapProtection
2openRing
 .1.0.8802.17.1.1.1.1.1.1.18
rprIfCurrentStatus
Indicates the current status of the RPR interface.
this attribute is used to generate alarm to the management system.
Bits
Enumerated Values:
0neighborInconsistency
1duplicateMac
2exceedMaxStations
 .1.0.8802.17.1.1.1.1.1.1.19
rprIfLastChange
The value of sysUpTime at the time when any of the following
attributes changes:
rprIfStationsOnRing, rprIfReversionMode, rprIfProtectionWTR,
rprIfProtectionFastTimer, rprIfProtectionSlowTimer, rprIfAtdTimer,
rprIfKeepa…
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
 .1.0.8802.17.1.1.1.1.1.1.20
rprIfChanges
Indicates number of times rprIfLastChange changed.

The discontinued counter value is indicated
by the ifCounterDiscontinuityTime value.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.0.8802.17.1.1.1.1.1.1.21

rprIfStatsControlTable

table
.1.0.8802.17.1.1.1.1.2 · 1 row entry · 7 columns
Open in standard view
Uses the rfc variant from /opt/observium/mibs/rfc.
Command help
Walk rprIfStatsControlTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IEEE-802DOT17-RPR-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IEEE-802DOT17-RPR-MIB::rprIfStatsControlTable' 
The RPR statistics management table,
controls the collection, duration, clearance, and status
of the MAC statistics.
          
The usage of this table is as follows:
1. In order to clear period of counters (or all periods) of 
   specific counting point (or all counting points) of the 
   RPR MAC, the user should first set the 
   rprIfStatsControlPeriodClear item to specify the period 
   that he would like to clear, and the 
   rprIfStatsControlCountPointClear item to specify the 
   counting point on which he would like to perform the 
   statistics clearance.
   In case that the user specified 'clearSpecificInterval'
   in the rprIfStatsControlPeriodClear item, the user should 
   also set the specific interval to clear by setting 
   rprIfStatsControlIntervalClear.
   After setting these items, the user can activate the 
   clear operation by setting rprIfStatsControlCommitClear
   item to 'commit'.
   The status of the clear operation (done of failed) is 
   indicated by the returned value of rprIfStatsControlCommitClear
   item.
2. Setting rprIfStatsControlPeriodClear to 'clearAllIntervals' and
   rprIfStatsControlCountPointClear to 'clearWest' (for example)
   will clear all current and previous intervals, and day
   counters of the west side of the RPR MAC.
3. The IntervalValidData of cleared interval should be set to false.
          
All read-write attributes in this table are volatile,
i.e. will be cleared on system reset.
rprIfStatsControlEntry row .1.0.8802.17.1.1.1.1.2.1
One such entry for every interface in the ifTable which
has an ifType of RPR interface.
Indexes
Column Syntax OID
rprIfStatsControlIfIndex
The ifIndex of this RPR interface.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.0.8802.17.1.1.1.1.2.1.1
rprIfStatsControlPeriodClear
This attribute allows for some or all of the
interval statistics for this RPR MAC to be cleared.
It does not affect the values of the running counters
or the counter values reported through the interface MIB.
…
Enumerationr/w
Enumerated Values:
1idle
2clearAllIntervals
3clearCurrent
4clearIntervals
5clearSpecificInterval
 .1.0.8802.17.1.1.1.1.2.1.2
rprIfStatsControlCountPointClear
This attribute allows for a specific counting point of the
RPR MAC or all of the RPR MAC counting points to be cleared
on rprIfStatsControlPeriodClear request.

Default value for Interface to clear is cle…
Enumerationr/w
Enumerated Values:
1clearAll
2clearWest
3clearEast
4clearClient
 .1.0.8802.17.1.1.1.1.2.1.3
rprIfStatsControlIntervalClear
The statistics interval number to clear.
The interval identified by 1 is the most recently completed
15 minute interval, and interval identified by N is the
interval immediately preceding the one identified by N-1.
…
Unsigned32r/w
Constraints:
range: 1-96
 .1.0.8802.17.1.1.1.1.2.1.4
rprIfStatsControlCommitClear
Sends a commit with input parameters to specify the
Period (rprIfStatsControlPeriodClear),
count point (rprIfStatsControlCountPointClear) and
specific interval (rprIfStatsControlIntervalClear) to clear.

…
Enumerationr/w
Enumerated Values:
1commit
2commitDone
3commitFailed
 .1.0.8802.17.1.1.1.1.2.1.5
rprIfStatsControlTimeElapsed
The number of seconds, including partial seconds, that
have elapsed since the beginning of the current
measurement interval. If, for some reason, such as an
adjustment in the system's time-of-day clock, the current
inte…
SecondsUnsigned32
Constraints:
range: 0-899
 .1.0.8802.17.1.1.1.1.2.1.6
rprIfStatsControlValidIntervals
The number of previous 15-minute intervals for
which data was collected.
An RPR interface must be capable of supporting at least n
intervals.
The minimum value of n is 4. The default of n is 32.
The maximum value of n i…
Unsigned32
Constraints:
range: 0-96
 .1.0.8802.17.1.1.1.1.2.1.7

rprSpanTable

table
.1.0.8802.17.1.1.1.1.3 · 1 row entry · 7 columns
Open in standard view
Uses the rfc variant from /opt/observium/mibs/rfc.
Command help
Walk rprSpanTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IEEE-802DOT17-RPR-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IEEE-802DOT17-RPR-MIB::rprSpanTable' 
The RPR interface Span table.
          
All read-write attributes in this table are non-volatile,
i.e. will be retained across system reset.
rprSpanEntry row .1.0.8802.17.1.1.1.1.3.1
One such entry for every span of an RPR interface.
Indexes
Column Syntax OID
rprSpanIfIndex
The ifIndex of this RPR interface.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.0.8802.17.1.1.1.1.3.1.1
rprSpanId
Indicates the span interface of the RPR MAC. Each RPR
span is connected to both ringlet0 and ringlet1.
The east span receives from ringlet1 and transmits through
ringlet0.
The west span receives from ringlet0 and tran…
RprSpan
Type Values:
1east
2west
 .1.0.8802.17.1.1.1.1.3.1.2
rprSpanLowerLayerIfIndex
The ifIndex of interface which is below the RPR layer in this
span. A value of zero indicates an interface index that has
yet to be determined
IF-MIBInterfaceIndexOrZero
Type Constraints:
range: 0..2147483647
Description:
This textual convention is an extension of the
InterfaceIndex convention. The latter defines a greater
than zero value used to identify an interface or interface
sub-layer in the managed system. This extension permits…
 .1.0.8802.17.1.1.1.1.3.1.3
rprSpanTotalRingletReservedRate
The total reserved subclassA0 bandwidth on the ringlet.
This variable is used by the fairness module
to determine the total reclaimable bandwidth.
Mb/sSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.0.8802.17.1.1.1.1.3.1.4
rprSpanCurrentStatus
Indicates the current status of the RPR span.
this attribute is used to generate alarm to the management system.
Bits
Enumerated Values:
0keepAliveTimeout
1miscabling
2phyLinkDegrade
3phyLinkFail
 .1.0.8802.17.1.1.1.1.3.1.5
rprSpanLastChange
The value of sysUpTime at the time when any of the following
attributes changes:
rprSpanCurrentStatus,
rprSpanProtectionNeighborValid, rprSpanProtectionHoldOffTimer,
rprSpanProtectionCommand, rprSpanProtectionCount.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
 .1.0.8802.17.1.1.1.1.3.1.6
rprSpanChanges
Indicates number of times rprSpanLastChange changed.

The discontinued counter value is indicated
by the ifCounterDiscontinuityTime value.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.0.8802.17.1.1.1.1.3.1.7

rprSpanProtectionTable

table
.1.0.8802.17.1.1.1.1.4 · 1 row entry · 8 columns
Open in standard view
Uses the rfc variant from /opt/observium/mibs/rfc.
Command help
Walk rprSpanProtectionTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IEEE-802DOT17-RPR-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IEEE-802DOT17-RPR-MIB::rprSpanProtectionTable' 
The RPR interface Span protection management table.
          
All read-write attributes in this table are non-volatile,
i.e. will be retained across system reset.
rprSpanProtectionEntry row .1.0.8802.17.1.1.1.1.4.1
One such entry for every span of an RPR interface.
Indexes
Column Syntax OID
rprSpanProtectionIfIndex
The ifIndex of this RPR interface.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.0.8802.17.1.1.1.1.4.1.1
rprSpanProtectionSpan
The Span for this entry.
RprSpan
Type Values:
1east
2west
 .1.0.8802.17.1.1.1.1.4.1.2
rprSpanProtectionNeighborValid
Indicates whether the neighbor address is active or former.
true value for active, false for former
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.0.8802.17.1.1.1.1.4.1.3
rprSpanProtectionHoldOffTimer
The period that RPR gives to lower layer to perform
protection, before it activates its protection mechanism.

Default value of hold off timer is 0.
millisecondsUnsigned32r/w
Constraints:
range: 0-500
 .1.0.8802.17.1.1.1.1.4.1.4
rprSpanProtectionCommand
The protection mode requested by management for the local
station that can affect the protection status of the RPR
station, according to the set of rules describing the RPR
protection.

When read, this o…
Enumerationr/w
Enumerated Values:
1idle
2manualSwitch
3forcedSwitch
 .1.0.8802.17.1.1.1.1.4.1.5
rprSpanProtectionCount
The number of transitions from idle state to active
protection state.

The discontinued counter value is indicated
by the ifCounterDiscontinuityTime value.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.0.8802.17.1.1.1.1.4.1.6
rprSpanProtectionDuration
The total amount of time protection was active on the
span interface.

The discontinued counter value is indicated
by the ifCounterDiscontinuityTime value.
secondsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.0.8802.17.1.1.1.1.4.1.7
rprSpanProtectionLastActivationTime
The value of sysUpTime at the time of the last protection
activation.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
 .1.0.8802.17.1.1.1.1.4.1.8

rprTopoImageTable

table
.1.0.8802.17.1.1.1.2.1 · 1 row entry · 18 columns
Open in standard view
Uses the rfc variant from /opt/observium/mibs/rfc.
Command help
Walk rprTopoImageTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IEEE-802DOT17-RPR-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IEEE-802DOT17-RPR-MIB::rprTopoImageTable' 
A topology map that details the list of stations on the RPR
ringlets.
          
All attributes in this table are volatile,
i.e. will be cleared on system reset.
rprTopoImageEntry row .1.0.8802.17.1.1.1.2.1.1
Each entry contains information specific to a particular
station on the ring.

The table has at least one entry for the station itself,
this entry indicates zero hops on each ringlet.
Indexes
Column Syntax OID
rprTopoImageIfIndex
The ifIndex of this RPR interface.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.0.8802.17.1.1.1.2.1.1.1
rprTopoImageMacAddress
The 48-bit MAC address of the station.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.0.8802.17.1.1.1.2.1.1.2
rprTopoImageSecMacAddress1
The 48-bit first secondary MAC address of the station.

Default and unused value is FF:FF:FF:FF:FF:FF
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.0.8802.17.1.1.1.2.1.1.3
rprTopoImageSecMacAddress2
The 48-bit second secondary MAC address of the station.

Default and unused value is FF:FF:FF:FF:FF:FF
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.0.8802.17.1.1.1.2.1.1.4
rprTopoImageStationIfIndex
The station ifIndex.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.0.8802.17.1.1.1.2.1.1.5
rprTopoImageStationName
The operator assigned station name.
SNMP-FRAMEWORK-MIBSnmpAdminString
Type Constraints:
range: 0..255
 .1.0.8802.17.1.1.1.2.1.1.6
rprTopoImageInetAddressType
Denotes the address type of the station INET address
It should be set to 'unknown' if station INET address
is not known.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.0.8802.17.1.1.1.2.1.1.7
rprTopoImageInetAddress
This object contains the value of of the station
IP (v4 or V6) address.
The format of this address is specified by the value
of the corresponding rprTopoImageInetAddressType object.

If the address type …
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
 .1.0.8802.17.1.1.1.2.1.1.8
rprTopoImageCapability
Indicates the capabilities that the MAC supports.

jumboFrames - Indicates whether the MAC capable of receiving,
transmitting and transiting jumbo frames.

wrapProtection - Indicates whether …
Bits
Enumerated Values:
0jumboFrames
1wrapProtection
2supportsConservativeFairness
 .1.0.8802.17.1.1.1.2.1.1.9
rprTopoImageRinglet0Hops
The number of hops to this station through ringlet0.

The self station is indicated with zero hops.
A non reachable station is indicated with -1 value.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.0.8802.17.1.1.1.2.1.1.10
rprTopoImageRinglet0ReservedRate
The amount of A0 traffic that this station adds on ringlet0,
in Mb/s units.
Mb/sSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.0.8802.17.1.1.1.2.1.1.11
rprTopoImageRinglet1Hops
The number of hops to this station through ringlet1.

The self station is indicated with zero hops.
A non reachable station is indicated with -1 value.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.0.8802.17.1.1.1.2.1.1.12
rprTopoImageRinglet1ReservedRate
The amount of A0 traffic that this station adds on ringlet1,
in Mb/s units.
Mb/sSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.0.8802.17.1.1.1.2.1.1.13
rprTopoImageWestProtectionStatus
The current protection status of the West span.
RprProtectionStatus
Type Values:
0noRequest
1waitToRestore
2manualSwitch
3signalDegraded
4signalFailed
5forcedSwitch
 .1.0.8802.17.1.1.1.2.1.1.14
rprTopoImageWestWeight
The weight of the station on the west span.
used for weighted fairness.
Unsigned32
Constraints:
range: 1-255
 .1.0.8802.17.1.1.1.2.1.1.15
rprTopoImageEastProtectionStatus
The current protection status of the east span.
RprProtectionStatus
Type Values:
0noRequest
1waitToRestore
2manualSwitch
3signalDegraded
4signalFailed
5forcedSwitch
 .1.0.8802.17.1.1.1.2.1.1.16
rprTopoImageEastWeight
The weight of the station on the east span.
Used for weighted fairness.
Unsigned32
Constraints:
range: 1-255
 .1.0.8802.17.1.1.1.2.1.1.17
rprTopoImageStatus
Status of the station,
the reachability of station through ringlet0 and ringlet1,
wrap active on the station spans,
events of reception frames with bad FCS,
events of reception multichoke fairness frames.
Bits
Enumerated Values:
0reachableRinglet0
1reachableRinglet1
2wrapActiveWest
3wrapActiveEast
4receivedBadFcs
5receivedMultichokeFairness
 .1.0.8802.17.1.1.1.2.1.1.18

rprFairnessTable

table
.1.0.8802.17.1.1.1.2.2 · 1 row entry · 21 columns
Open in standard view
Uses the rfc variant from /opt/observium/mibs/rfc.
Command help
Walk rprFairnessTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IEEE-802DOT17-RPR-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IEEE-802DOT17-RPR-MIB::rprFairnessTable' 
A table of RPR Fairness per RPR span.
          
All read-write attributes in this table are non-volatile,
i.e. will be retained across system reset.
rprFairnessEntry row .1.0.8802.17.1.1.1.2.2.1
A fairness parameters for a particular ringlet of the
an RPR interface.
Indexes
Column Syntax OID
rprFairnessIfIndex
The ifIndex of this RPR interface.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.0.8802.17.1.1.1.2.2.1.1
rprFairnessRinglet
The ringlet for which this row contains information.

ringlet0 is the transmission of the east span and the
reception of the west span,
ringlet1 is the transmission of the west span and the
reception of …
Enumeration
Enumerated Values:
1ringlet0
2ringlet1
 .1.0.8802.17.1.1.1.2.2.1.2
rprFairnessRingletWeight
Weight assigned to fairness to permit the scaling of
fair rate values among stations on the ringlet.
This allows one station to use a larger share of available
capacity than another station without violating fairness
…
Unsigned32r/w
Constraints:
range: 1-255
 .1.0.8802.17.1.1.1.2.2.1.3
rprFairnessReservedRate
The amount of A0 traffic that this station adds that ringlet,
in Mb/s units.

Default value for A0 reserved rate is 0 Mb/s.
Mb/sSNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.0.8802.17.1.1.1.2.2.1.4
rprFairnessMaxAllowed
The maximum value that the station is allowed to transmit
local excess traffic to the ringlet. The default value
is the physical ring rate.
Mb/sSNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.0.8802.17.1.1.1.2.2.1.5
rprFairnessAgeCoef
The coefficient used by the aging procedure to specify
the relative weights assigned to
(a) the change in the value of a rate-counter during
the most recent agingInterval and
(b) the value of the rate-counter at …
Unsigned32r/w
Constraints:
range: 0-4
 .1.0.8802.17.1.1.1.2.2.1.6
rprFairnessRampCoef
The coefficient used for ramping a rate.


The value is interpreted as 2 raised to the power
specified by this attribute.

The default value is 6, giving a low-pass coefficient…
Unsigned32r/w
Constraints:
range: 4-9
 .1.0.8802.17.1.1.1.2.2.1.7
rprFairnessLpCoef
The coefficient used by the low-pass filter procedure
to specify the relative weights applied to
(a) the increase in the rate-count value during the most
recent agingInterval and
(b) the previous low-pass filtered…
Unsigned32r/w
Constraints:
range: 4-9
 .1.0.8802.17.1.1.1.2.2.1.8
rprFairnessAdvertisementRatio
The ratio between the link capacity reserved for fairness
control messages and the total link capacity.

Default value of fairness advertisement ratio is 5 units
of 0.00025, i.e 0.00125.
0.00025Unsigned32r/w
Constraints:
range: 1-40
 .1.0.8802.17.1.1.1.2.2.1.9
rprFairnessMcffReportCoef
Indicates the number of SCFF advertisingIntervals that
elapse between the sending of successive MCFFs,
This value allows the interval between sending MCFFs
to be established as MCFF_reportingInterval =
rprFairnessMcffR…
Unsigned32r/w
Constraints:
range: 8-512
 .1.0.8802.17.1.1.1.2.2.1.10
rprFairnessActiveWeightsCoef
Indicates the number of agingIntervals that elapse between
successive computations of activeWeights.
This value allows the interval between computations of
activeWeights to be established as
activeWeightsInterval = act…
Unsigned32r/w
Constraints:
range: 8-512
 .1.0.8802.17.1.1.1.2.2.1.11
rprFairnessSTQHighThreshold
A level of STQ occupancy at or above which CSFE frames are no
longer admitted. Defined only for a dual transit-queue
implementation.

This attribute specifies the high threshold location
in percentage of …
Tenth of percentUnsigned32r/w
Constraints:
range: 0-1000
 .1.0.8802.17.1.1.1.2.2.1.12
rprFairnessSTQMedThreshold
A level of buffer occupancy in a dual-queue deployment,
at or above which congestion on the outbound link is declared.

This attribute specifies the medium threshold location
in percentage of the STQ size.…
Tenth of percentUnsigned32r/w
Constraints:
range: 0-1000
 .1.0.8802.17.1.1.1.2.2.1.13
rprFairnessSTQLowThreshold
A level of STQ occupancy at or above which congestion on
the outbound link is imminent.
Defined only for dual transit-queue implementations.

This attribute specifies the low threshold location
in percen…
Tenth of percentUnsigned32r/w
Constraints:
range: 0-1000
 .1.0.8802.17.1.1.1.2.2.1.14
rprFairnessRateHighThreshold
Rate at or above which congestion on the outbound link
is declared.

The range is [0.4 * unreservedRate, 0.99 * unreservedRate].
The default value is 0.95 * unreservedRate.
Tenth of percentUnsigned32r/w
Constraints:
range: 400-990
 .1.0.8802.17.1.1.1.2.2.1.15
rprFairnessRateLowThreshold
Rate at or above which congestion on the outbound link
is imminent.

The range is [0.5 * rateHighThreshold, 0.99 * rateHighThreshold].
The default value is 0.9 * rateHighThreshold
Tenth of percentUnsigned32r/w
Constraints:
range: 500-990
 .1.0.8802.17.1.1.1.2.2.1.16
rprFairnessResetWaterMarks
Write resetWaterMarks to this attribute to reset
the STQ water marks to the current occupancy.

Default value is idle
Enumerationr/w
Enumerated Values:
1idle
2resetWaterMarks
 .1.0.8802.17.1.1.1.2.2.1.17
rprFairnessSTQHighWaterMark
The highest level of STQ occupancy since the last reset
of this value, in percentage of the STQ size.
Tenth of percentUnsigned32
Constraints:
range: 0-1000
 .1.0.8802.17.1.1.1.2.2.1.18
rprFairnessSTQLowWaterMark
The lowest level of STQ occupancy since the last reset of
this value, in percentage of the STQ size.
Tenth of percentUnsigned32
Constraints:
range: 0-1000
 .1.0.8802.17.1.1.1.2.2.1.19
rprFairnessLastChange
The value of sysUpTime at the time when any of the following
attributes changes:
rprFairnessRingletWeight, rprFairnessReservedRate,
rprFairnessMaxAllowed, rprFairnessAgeCoef, rprFairnessRampCoef,
rprFairnessLpCoef, rprF…
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
 .1.0.8802.17.1.1.1.2.2.1.20
rprFairnessChanges
Indicates number of times rprFairnessLastChange changed.

The discontinued counter value is indicated
by the ifCounterDiscontinuityTime value.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.0.8802.17.1.1.1.2.2.1.21

rprOamTable

table
.1.0.8802.17.1.1.1.2.3 · 1 row entry · 14 columns
Open in standard view
Uses the rfc variant from /opt/observium/mibs/rfc.
Command help
Walk rprOamTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IEEE-802DOT17-RPR-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IEEE-802DOT17-RPR-MIB::rprOamTable' 
A table of RPR OAM actions.
The table is designed to support a one action at a time
on an RPR interface.
          
All read-write attributes in this table are volatile,
i.e. will be cleared on system reset.
rprOamEntry row .1.0.8802.17.1.1.1.2.3.1
OAM Echo and Flush control for an RPR interface
Indexes
Column Syntax OID
rprOamIfIndex
The ifIndex of this RPR interface.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.0.8802.17.1.1.1.2.3.1.1
rprOamActionType
The type of OAM action.
The valid values for this object are:
(1) echo (2) flush.
Enumerationr/w
Enumerated Values:
1echo
2flush
 .1.0.8802.17.1.1.1.2.3.1.2
rprOamDestAddress
The 48-bit MAC address of the destination station of OAM
session.
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.0.8802.17.1.1.1.2.3.1.3
rprOamRequestRinglet
The ringlet ID on which the OAM request should be sent.
RprOamRingletr/w
Type Values:
1default
2ringlet0
3ringlet1
4reverseRinglet
 .1.0.8802.17.1.1.1.2.3.1.4
rprOamResponseRinglet
The ringlet ID on which the OAM response should be replied.
RprOamRingletr/w
Type Values:
1default
2ringlet0
3ringlet1
4reverseRinglet
 .1.0.8802.17.1.1.1.2.3.1.5
rprOamClassOfService
The class-of-service of OAM session frames
Enumerationr/w
Enumerated Values:
1classA
2classB
3classC
 .1.0.8802.17.1.1.1.2.3.1.6
rprOamUserData
The operator assigned user specific data.
OctetStringr/w
Constraints:
range: 0-1024
 .1.0.8802.17.1.1.1.2.3.1.7
rprOamProtected
Indicates whether the OAM action should be protected.

In a wrapping ring,
If true, the WE (wrap eligible) bit of the OAM action
frame is set to 1.
Otherwise, the WE bit is set to 0.

In ste…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.0.8802.17.1.1.1.2.3.1.8
rprOamRequestCount
Indicates the number of OAM requests to send.

Default value of OAM request action is 1.
Unsigned32r/w
Constraints:
range: 0-65535
 .1.0.8802.17.1.1.1.2.3.1.9
rprOamTimeout
Indicates the timer to declare OAM action timeout,
in 10usec units.

Default value of OAM timeout is 500 units of 10usec (i.e. 5 ms)
10usecUnsigned32r/w
Constraints:
range: 1-10000
 .1.0.8802.17.1.1.1.2.3.1.10
rprOamControl
Control of an OAM action.
The valid values for this object are:
(1) idle (2) active (3) abort.

Default value of OAM control is idle.
Enumerationr/w
Enumerated Values:
1idle
2active
3abort
 .1.0.8802.17.1.1.1.2.3.1.11
rprOamResponseCount
Indicates the number of OAM actions responses received.
Unsigned32
Constraints:
range: 0-65535
 .1.0.8802.17.1.1.1.2.3.1.12
rprOamAvResponseTime
Average response time to receive the OAM reply.
10usecUnsigned32
Constraints:
range: 0-65535
 .1.0.8802.17.1.1.1.2.3.1.13
rprOamResponseStatus
Status of an OAM action.
The valid values for this object are:
(1) unknown (2) inProcess (3) error (4) success.

The action status is success if at least 90% of the responses
were received till timeout.
Enumeration
Enumerated Values:
1unknown
2inProcess
3error
4success
 .1.0.8802.17.1.1.1.2.3.1.14

rprSpanCountersCurrentTable

table
.1.0.8802.17.1.1.1.3.1 · 1 row entry · 34 columns
Open in standard view
Uses the rfc variant from /opt/observium/mibs/rfc.
Command help
Walk rprSpanCountersCurrentTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IEEE-802DOT17-RPR-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IEEE-802DOT17-RPR-MIB::rprSpanCountersCurrentTable' 
The RPR MAC Span interface current counters table.
          
All attributes in this table are volatile,
i.e. will be cleared on system reset.
rprSpanCountersCurrentEntry row .1.0.8802.17.1.1.1.3.1.1
Frames and octets statistics for the current interval for
the RPR MAC Span interface.
The corresponding instance of rprIfStatsControlTimeElapsed
indicates the number of seconds which have elapsed
so far in the current …
Indexes
Column Syntax OID
rprSpanCurrentIfIndex
The ifIndex of this RPR interface.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.0.8802.17.1.1.1.3.1.1.1
rprSpanCurrentSpan
An indication of the span of the interface for which this
row contains information.
RprSpan
Type Values:
1east
2west
 .1.0.8802.17.1.1.1.3.1.1.2
rprSpanCurrentInUcastClassAFrames
The number of received (PHY to MAC) classA unicast frames
in the current interval.
HC-PerfHist-TC-MIBHCPerfCurrentCount .1.0.8802.17.1.1.1.3.1.1.3
rprSpanCurrentInUcastClassAOctets
The number of received (PHY to MAC) classA unicast octets,
in the current interval.
HC-PerfHist-TC-MIBHCPerfCurrentCount .1.0.8802.17.1.1.1.3.1.1.4
rprSpanCurrentInUcastClassBCirFrames
The number of received (PHY to MAC) classB CIR unicast frames
in the current interval.
HC-PerfHist-TC-MIBHCPerfCurrentCount .1.0.8802.17.1.1.1.3.1.1.5
rprSpanCurrentInUcastClassBCirOctets
The number of received (PHY to MAC) classB CIR unicast octets
in the current interval.
HC-PerfHist-TC-MIBHCPerfCurrentCount .1.0.8802.17.1.1.1.3.1.1.6
rprSpanCurrentInUcastClassBEirFrames
The number of received (PHY to MAC) classB EIR unicast frames
in the current interval.
HC-PerfHist-TC-MIBHCPerfCurrentCount .1.0.8802.17.1.1.1.3.1.1.7
rprSpanCurrentInUcastClassBEirOctets
The number of received (PHY to MAC) classB EIR unicast octets
in the current interval.
HC-PerfHist-TC-MIBHCPerfCurrentCount .1.0.8802.17.1.1.1.3.1.1.8
rprSpanCurrentInUcastClassCFrames
The number of received (PHY to MAC) classC unicast frames
in the current interval.
HC-PerfHist-TC-MIBHCPerfCurrentCount .1.0.8802.17.1.1.1.3.1.1.9
rprSpanCurrentInUcastClassCOctets
The number of received (PHY to MAC) classC unicast octets
in the current interval.
HC-PerfHist-TC-MIBHCPerfCurrentCount .1.0.8802.17.1.1.1.3.1.1.10
rprSpanCurrentInMcastClassAFrames
The number of received (PHY to MAC) classA multicast and
broadcast frames in the current interval.
HC-PerfHist-TC-MIBHCPerfCurrentCount .1.0.8802.17.1.1.1.3.1.1.11
rprSpanCurrentInMcastClassAOctets
The number of received (PHY to MAC) classA multicast and
broadcast octets in the current interval.
HC-PerfHist-TC-MIBHCPerfCurrentCount .1.0.8802.17.1.1.1.3.1.1.12
rprSpanCurrentInMcastClassBCirFrames
The number of received (PHY to MAC) classB CIR multicast and
broadcast frames in the current interval.
HC-PerfHist-TC-MIBHCPerfCurrentCount .1.0.8802.17.1.1.1.3.1.1.13
rprSpanCurrentInMcastClassBCirOctets
The number of received (PHY to MAC) classB CIR multicast and
broadcast octets in the current interval.
HC-PerfHist-TC-MIBHCPerfCurrentCount .1.0.8802.17.1.1.1.3.1.1.14
rprSpanCurrentInMcastClassBEirFrames
The number of received (PHY to MAC) classB EIR multicast and
broadcast frames in the current interval.
HC-PerfHist-TC-MIBHCPerfCurrentCount .1.0.8802.17.1.1.1.3.1.1.15
rprSpanCurrentInMcastClassBEirOctets
The number of received (PHY to MAC) classB EIR multicast and
broadcast octets in the current interval.
HC-PerfHist-TC-MIBHCPerfCurrentCount .1.0.8802.17.1.1.1.3.1.1.16
rprSpanCurrentInMcastClassCFrames
The number of received (PHY to MAC) classC multicast and
broadcast frames in the current interval.
HC-PerfHist-TC-MIBHCPerfCurrentCount .1.0.8802.17.1.1.1.3.1.1.17
rprSpanCurrentInMcastClassCOctets
The number of received (PHY to MAC) classC multicast and
broadcast octets in the current interval.
HC-PerfHist-TC-MIBHCPerfCurrentCount .1.0.8802.17.1.1.1.3.1.1.18
rprSpanCurrentOutUcastClassAFrames
The number of transmitted (MAC to PHY) classA unicast frames
in the current interval.
HC-PerfHist-TC-MIBHCPerfCurrentCount .1.0.8802.17.1.1.1.3.1.1.19
rprSpanCurrentOutUcastClassAOctets
The number of transmitted (MAC to PHY) classA unicast octets
in the current interval.
HC-PerfHist-TC-MIBHCPerfCurrentCount .1.0.8802.17.1.1.1.3.1.1.20
rprSpanCurrentOutUcastClassBCirFrames
The number of transmitted (MAC to PHY) classB CIR unicast frames
in the current interval.
HC-PerfHist-TC-MIBHCPerfCurrentCount .1.0.8802.17.1.1.1.3.1.1.21
rprSpanCurrentOutUcastClassBCirOctets
The number of transmitted (MAC to PHY) classB CIR unicast octets
in the current interval.
HC-PerfHist-TC-MIBHCPerfCurrentCount .1.0.8802.17.1.1.1.3.1.1.22
rprSpanCurrentOutUcastClassBEirFrames
The number of transmitted (MAC to PHY) classB EIR unicast frames
in the current interval.
HC-PerfHist-TC-MIBHCPerfCurrentCount .1.0.8802.17.1.1.1.3.1.1.23
rprSpanCurrentOutUcastClassBEirOctets
The number of transmitted (MAC to PHY) classB EIR unicast octets
in the current interval.
HC-PerfHist-TC-MIBHCPerfCurrentCount .1.0.8802.17.1.1.1.3.1.1.24
rprSpanCurrentOutUcastClassCFrames
The number of transmitted (MAC to PHY) classC unicast frames
in the current interval.
HC-PerfHist-TC-MIBHCPerfCurrentCount .1.0.8802.17.1.1.1.3.1.1.25
rprSpanCurrentOutUcastClassCOctets
The number of transmitted (MAC to PHY) classC unicast octets
in the current interval.
HC-PerfHist-TC-MIBHCPerfCurrentCount .1.0.8802.17.1.1.1.3.1.1.26
rprSpanCurrentOutMcastClassAFrames
The number of transmitted (MAC to PHY) classA multicast and
broadcast frames in the current interval.
HC-PerfHist-TC-MIBHCPerfCurrentCount .1.0.8802.17.1.1.1.3.1.1.27
rprSpanCurrentOutMcastClassAOctets
The number of transmitted (MAC to PHY) classA multicast and
broadcast octets in the current interval.
HC-PerfHist-TC-MIBHCPerfCurrentCount .1.0.8802.17.1.1.1.3.1.1.28
rprSpanCurrentOutMcastClassBCirFrames
The number of transmitted (MAC to PHY) classB CIR multicast and
broadcast frames in the current interval.
HC-PerfHist-TC-MIBHCPerfCurrentCount .1.0.8802.17.1.1.1.3.1.1.29
rprSpanCurrentOutMcastClassBCirOctets
The number of transmitted (MAC to PHY) classB CIR multicast and
broadcast octets in the current interval.
HC-PerfHist-TC-MIBHCPerfCurrentCount .1.0.8802.17.1.1.1.3.1.1.30
rprSpanCurrentOutMcastClassBEirFrames
The number of transmitted (MAC to PHY) classB EIR multicast and
broadcast frames in the current interval.
HC-PerfHist-TC-MIBHCPerfCurrentCount .1.0.8802.17.1.1.1.3.1.1.31
rprSpanCurrentOutMcastClassBEirOctets
The number of transmitted (MAC to PHY) classB EIR multicast and
broadcast octets in the current interval.
HC-PerfHist-TC-MIBHCPerfCurrentCount .1.0.8802.17.1.1.1.3.1.1.32
rprSpanCurrentOutMcastClassCFrames
The number of transmitted (MAC to PHY) classC multicast and
broadcast frames in the current interval.
HC-PerfHist-TC-MIBHCPerfCurrentCount .1.0.8802.17.1.1.1.3.1.1.33
rprSpanCurrentOutMcastClassCOctets
The number of transmitted (MAC to PHY) classC multicast and
broadcast octets in the current interval.
HC-PerfHist-TC-MIBHCPerfCurrentCount .1.0.8802.17.1.1.1.3.1.1.34

rprSpanCountersIntervalTable

table
.1.0.8802.17.1.1.1.3.2 · 1 row entry · 38 columns
Open in standard view
Uses the rfc variant from /opt/observium/mibs/rfc.
Command help
Walk rprSpanCountersIntervalTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IEEE-802DOT17-RPR-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IEEE-802DOT17-RPR-MIB::rprSpanCountersIntervalTable' 
The RPR MAC Span interface interval counters table.
          
All attributes in this table are volatile,
i.e. will be cleared on system reset.
rprSpanCountersIntervalEntry row .1.0.8802.17.1.1.1.3.2.1
Frames and octets statistics collected for a particular
interval for the RPR MAC Span interface of a
particular span of a particular RPR interface.
The corresponding instance of rprIfValidIntervals
indicates the numb…
Indexes
Column Syntax OID
rprSpanIntervalIfIndex
The ifIndex of this RPR interface.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.0.8802.17.1.1.1.3.2.1.1
rprSpanIntervalSpan
An indication of the span of the interface for which this
row contains information.
RprSpan
Type Values:
1east
2west
 .1.0.8802.17.1.1.1.3.2.1.2
rprSpanIntervalNumber
A number between 1 and 96, which identifies the intervals
for which the set of statistics is available. The interval
identified by 1 is the most recently completed 15 minute
interval, and interval identified by N is th…
Unsigned32
Constraints:
range: 1-96
 .1.0.8802.17.1.1.1.3.2.1.3
rprSpanIntervalValidData
This variable indicates if the data for this interval
is valid.
It will be valid if it contains data for 900 seconds
plus or minus 10 seconds.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.0.8802.17.1.1.1.3.2.1.4
rprSpanIntervalTimeElapsed
The duration of a particular interval in seconds.
If, for some reason, such as an adjustment in the system's
time-of-day clock, the current interval exceeds the maximum
value, the agent will return the maximum value.
SecondsUnsigned32
Constraints:
range: 0-899
 .1.0.8802.17.1.1.1.3.2.1.5
rprSpanIntervalStartTime
Indicates the wall clock time that this interval started.
SNMPv2-TCDateAndTime
Type Constraints:
range: 8
range: 11
Description:
A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …
 .1.0.8802.17.1.1.1.3.2.1.6
rprSpanIntervalInUcastClassAFrames
The number of received (PHY to MAC) classA unicast frames
in a particular interval in the past 24 hours.
HC-PerfHist-TC-MIBHCPerfIntervalCount .1.0.8802.17.1.1.1.3.2.1.7
rprSpanIntervalInUcastClassAOctets
The number of received (PHY to MAC) classA unicast octets
in a particular interval in the past 24 hours.
HC-PerfHist-TC-MIBHCPerfIntervalCount .1.0.8802.17.1.1.1.3.2.1.8
rprSpanIntervalInUcastClassBCirFrames
The number of received (PHY to MAC) classB CIR unicast frames
in a particular interval in the past 24 hours.
HC-PerfHist-TC-MIBHCPerfIntervalCount .1.0.8802.17.1.1.1.3.2.1.9
rprSpanIntervalInUcastClassBCirOctets
The number of received (PHY to MAC) classB CIR unicast octets
in a particular interval in the past 24 hours.
HC-PerfHist-TC-MIBHCPerfIntervalCount .1.0.8802.17.1.1.1.3.2.1.10
rprSpanIntervalInUcastClassBEirFrames
The number of received (PHY to MAC) classB EIR unicast
frames in a particular interval in the past 24 hours.
HC-PerfHist-TC-MIBHCPerfIntervalCount .1.0.8802.17.1.1.1.3.2.1.11
rprSpanIntervalInUcastClassBEirOctets
The number of received (PHY to MAC) classB EIR unicast
octets in a particular interval in the past 24 hours.
HC-PerfHist-TC-MIBHCPerfIntervalCount .1.0.8802.17.1.1.1.3.2.1.12
rprSpanIntervalInUcastClassCFrames
The number of received (PHY to MAC) classC unicast
frames in a particular interval in the past 24 hours.
HC-PerfHist-TC-MIBHCPerfIntervalCount .1.0.8802.17.1.1.1.3.2.1.13
rprSpanIntervalInUcastClassCOctets
The number of received (PHY to MAC) classC unicast
octets in a particular interval in the past 24 hours.
HC-PerfHist-TC-MIBHCPerfIntervalCount .1.0.8802.17.1.1.1.3.2.1.14
rprSpanIntervalInMcastClassAFrames
The number of received (PHY to MAC) classA multicast and
broadcast frames in a particular interval in the past 24 hours.
HC-PerfHist-TC-MIBHCPerfIntervalCount .1.0.8802.17.1.1.1.3.2.1.15
rprSpanIntervalInMcastClassAOctets
The number of received (PHY to MAC) classA multicast and
broadcast octets in a particular interval in the past 24 hours.
HC-PerfHist-TC-MIBHCPerfIntervalCount .1.0.8802.17.1.1.1.3.2.1.16
rprSpanIntervalInMcastClassBCirFrames
The number of received (PHY to MAC) classB CIR multicast and
broadcast frames in a particular interval in the past 24 hours.
HC-PerfHist-TC-MIBHCPerfIntervalCount .1.0.8802.17.1.1.1.3.2.1.17
rprSpanIntervalInMcastClassBCirOctets
The number of received (PHY to MAC) classB CIR multicast and
broadcast octets in a particular interval in the past 24 hours.
HC-PerfHist-TC-MIBHCPerfIntervalCount .1.0.8802.17.1.1.1.3.2.1.18
rprSpanIntervalInMcastClassBEirFrames
The number of received (PHY to MAC) classB EIR multicast and
broadcast frames in a particular interval in the past 24 hours.
HC-PerfHist-TC-MIBHCPerfIntervalCount .1.0.8802.17.1.1.1.3.2.1.19
rprSpanIntervalInMcastClassBEirOctets
The number of received (PHY to MAC) classB EIR multicast and
broadcast octets in a particular interval in the past 24 hours.
HC-PerfHist-TC-MIBHCPerfIntervalCount .1.0.8802.17.1.1.1.3.2.1.20
rprSpanIntervalInMcastClassCFrames
The number of received (PHY to MAC) classC multicast and
broadcast frames in a particular interval in the past 24 hours.
HC-PerfHist-TC-MIBHCPerfIntervalCount .1.0.8802.17.1.1.1.3.2.1.21
rprSpanIntervalInMcastClassCOctets
The number of received (PHY to MAC) classC multicast and
broadcast octets in a particular interval in the past 24 hours.
HC-PerfHist-TC-MIBHCPerfIntervalCount .1.0.8802.17.1.1.1.3.2.1.22
rprSpanIntervalOutUcastClassAFrames
The number of transmitted (MAC to PHY) classA unicast frames
in a particular interval in the past 24 hours.
HC-PerfHist-TC-MIBHCPerfIntervalCount .1.0.8802.17.1.1.1.3.2.1.23
rprSpanIntervalOutUcastClassAOctets
The number of transmitted (MAC to PHY) classA unicast octets
in a particular interval in the past 24 hours.
HC-PerfHist-TC-MIBHCPerfIntervalCount .1.0.8802.17.1.1.1.3.2.1.24
rprSpanIntervalOutUcastClassBCirFrames
The number of transmitted (MAC to PHY) classB CIR unicast frames,
in a particular interval in the past 24 hours.
HC-PerfHist-TC-MIBHCPerfIntervalCount .1.0.8802.17.1.1.1.3.2.1.25
rprSpanIntervalOutUcastClassBCirOctets
The number of transmitted (MAC to PHY) classB CIR unicast octets
in a particular interval in the past 24 hours.
HC-PerfHist-TC-MIBHCPerfIntervalCount .1.0.8802.17.1.1.1.3.2.1.26
rprSpanIntervalOutUcastClassBEirFrames
The number of transmitted (MAC to PHY) classB EIR unicast frames
in a particular interval in the past 24 hours.
HC-PerfHist-TC-MIBHCPerfIntervalCount .1.0.8802.17.1.1.1.3.2.1.27
rprSpanIntervalOutUcastClassBEirOctets
The number of transmitted (MAC to PHY) classB EIR unicast octets
in a particular interval in the past 24 hours.
HC-PerfHist-TC-MIBHCPerfIntervalCount .1.0.8802.17.1.1.1.3.2.1.28
rprSpanIntervalOutUcastClassCFrames
The number of transmitted (MAC to PHY) classC unicast frames
in a particular interval in the past 24 hours.
HC-PerfHist-TC-MIBHCPerfIntervalCount .1.0.8802.17.1.1.1.3.2.1.29
rprSpanIntervalOutUcastClassCOctets
The number of transmitted (MAC to PHY) classC unicast octets
in a particular interval in the past 24 hours.
HC-PerfHist-TC-MIBHCPerfIntervalCount .1.0.8802.17.1.1.1.3.2.1.30
rprSpanIntervalOutMcastClassAFrames
The number of transmitted (MAC to PHY) classA multicast and
broadcast frames in a particular interval in the past 24 hours.
HC-PerfHist-TC-MIBHCPerfIntervalCount .1.0.8802.17.1.1.1.3.2.1.31
rprSpanIntervalOutMcastClassAOctets
The number of transmitted (MAC to PHY) classA multicast and
broadcast octets in a particular interval in the past 24 hours.
HC-PerfHist-TC-MIBHCPerfIntervalCount .1.0.8802.17.1.1.1.3.2.1.32
rprSpanIntervalOutMcastClassBCirFrames
The number of transmitted (MAC to PHY) classB CIR multicast and
broadcast frames in a particular interval in the past 24 hours.
HC-PerfHist-TC-MIBHCPerfIntervalCount .1.0.8802.17.1.1.1.3.2.1.33
rprSpanIntervalOutMcastClassBCirOctets
The number of transmitted (MAC to PHY) classB CIR multicast and
broadcast octets in a particular interval in the past 24 hours.
HC-PerfHist-TC-MIBHCPerfIntervalCount .1.0.8802.17.1.1.1.3.2.1.34
rprSpanIntervalOutMcastClassBEirFrames
The number of transmitted (MAC to PHY) classB EIR multicast and
broadcast frames in a particular interval in the past 24 hours.
HC-PerfHist-TC-MIBHCPerfIntervalCount .1.0.8802.17.1.1.1.3.2.1.35
rprSpanIntervalOutMcastClassBEirOctets
The number of transmitted (MAC to PHY) classB EIR multicast and
broadcast octets in a particular interval in the past 24 hours.
HC-PerfHist-TC-MIBHCPerfIntervalCount .1.0.8802.17.1.1.1.3.2.1.36
rprSpanIntervalOutMcastClassCFrames
The number of transmitted (MAC to PHY) classC multicast and
broadcast frames in a particular interval in the past 24 hours.
HC-PerfHist-TC-MIBHCPerfIntervalCount .1.0.8802.17.1.1.1.3.2.1.37
rprSpanIntervalOutMcastClassCOctets
The number of transmitted (MAC to PHY) classC multicast and
broadcast octets in a particular interval in the past 24 hours.
HC-PerfHist-TC-MIBHCPerfIntervalCount .1.0.8802.17.1.1.1.3.2.1.38

rprSpanCountersDayTable

table
.1.0.8802.17.1.1.1.3.3 · 1 row entry · 34 columns
Open in standard view
Uses the rfc variant from /opt/observium/mibs/rfc.
Command help
Walk rprSpanCountersDayTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IEEE-802DOT17-RPR-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IEEE-802DOT17-RPR-MIB::rprSpanCountersDayTable' 
The RPR Mac Span Day Table contains the cumulative sum
of the various statistics for the 24 hour period
preceding the current interval.
          
All attributes in this table are volatile,
i.e. will be cleared on system reset.
rprSpanCountersDayEntry row .1.0.8802.17.1.1.1.3.3.1
An entry in the RPR Span Day table.
Indexes
Column Syntax OID
rprSpanDayIfIndex
The ifIndex of this RPR interface.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.0.8802.17.1.1.1.3.3.1.1
rprSpanDaySpan
An indication of the span of the interface for which this
row contains information.
RprSpan
Type Values:
1east
2west
 .1.0.8802.17.1.1.1.3.3.1.2
rprSpanDayInUcastClassAFrames
The number of received (PHY to MAC) classA unicast frames.
HC-PerfHist-TC-MIBHCPerfTotalCount .1.0.8802.17.1.1.1.3.3.1.3
rprSpanDayInUcastClassAOctets
The number of received (PHY to MAC) classA unicast octets.
HC-PerfHist-TC-MIBHCPerfTotalCount .1.0.8802.17.1.1.1.3.3.1.4
rprSpanDayInUcastClassBCirFrames
The number of received (PHY to MAC) classB CIR unicast frames.
HC-PerfHist-TC-MIBHCPerfTotalCount .1.0.8802.17.1.1.1.3.3.1.5
rprSpanDayInUcastClassBCirOctets
The number of received (PHY to MAC) classB CIR unicast octets.
HC-PerfHist-TC-MIBHCPerfTotalCount .1.0.8802.17.1.1.1.3.3.1.6
rprSpanDayInUcastClassBEirFrames
The number of received (PHY to MAC) classB EIR unicast frames.
HC-PerfHist-TC-MIBHCPerfTotalCount .1.0.8802.17.1.1.1.3.3.1.7
rprSpanDayInUcastClassBEirOctets
The number of received (PHY to MAC) classB EIR unicast octets.
HC-PerfHist-TC-MIBHCPerfTotalCount .1.0.8802.17.1.1.1.3.3.1.8
rprSpanDayInUcastClassCFrames
The number of received (PHY to MAC) classC unicast frames.
HC-PerfHist-TC-MIBHCPerfTotalCount .1.0.8802.17.1.1.1.3.3.1.9
rprSpanDayInUcastClassCOctets
The number of received (PHY to MAC) classC unicast octets.
HC-PerfHist-TC-MIBHCPerfTotalCount .1.0.8802.17.1.1.1.3.3.1.10
rprSpanDayInMcastClassAFrames
The number of received (PHY to MAC) classA multicast
and broadcast frames
HC-PerfHist-TC-MIBHCPerfTotalCount .1.0.8802.17.1.1.1.3.3.1.11
rprSpanDayInMcastClassAOctets
The number of received (PHY to MAC) classA multicast
and broadcast octets
HC-PerfHist-TC-MIBHCPerfTotalCount .1.0.8802.17.1.1.1.3.3.1.12
rprSpanDayInMcastClassBCirFrames
The number of received (PHY to MAC) classB CIR multicast
and broadcast frames
HC-PerfHist-TC-MIBHCPerfTotalCount .1.0.8802.17.1.1.1.3.3.1.13
rprSpanDayInMcastClassBCirOctets
The number of received (PHY to MAC) classB CIR multicast
and broadcast octets
HC-PerfHist-TC-MIBHCPerfTotalCount .1.0.8802.17.1.1.1.3.3.1.14
rprSpanDayInMcastClassBEirFrames
The number of received (PHY to MAC) classB EIR multicast
and broadcast frames
HC-PerfHist-TC-MIBHCPerfTotalCount .1.0.8802.17.1.1.1.3.3.1.15
rprSpanDayInMcastClassBEirOctets
The number of received (PHY to MAC) classB EIR multicast
and broadcast octets
HC-PerfHist-TC-MIBHCPerfTotalCount .1.0.8802.17.1.1.1.3.3.1.16
rprSpanDayInMcastClassCFrames
The number of received (PHY to MAC) classC multicast
and broadcast frames
HC-PerfHist-TC-MIBHCPerfTotalCount .1.0.8802.17.1.1.1.3.3.1.17
rprSpanDayInMcastClassCOctets
The number of received (PHY to MAC) classC multicast
and broadcast octets
HC-PerfHist-TC-MIBHCPerfTotalCount .1.0.8802.17.1.1.1.3.3.1.18
rprSpanDayOutUcastClassAFrames
The number of transmitted (MAC to PHY) classA unicast frames.
HC-PerfHist-TC-MIBHCPerfTotalCount .1.0.8802.17.1.1.1.3.3.1.19
rprSpanDayOutUcastClassAOctets
The number of transmitted (MAC to PHY) classA unicast octets.
HC-PerfHist-TC-MIBHCPerfTotalCount .1.0.8802.17.1.1.1.3.3.1.20
rprSpanDayOutUcastClassBCirFrames
The number of transmitted (MAC to PHY) classB CIR unicast frames.
HC-PerfHist-TC-MIBHCPerfTotalCount .1.0.8802.17.1.1.1.3.3.1.21
rprSpanDayOutUcastClassBCirOctets
The number of transmitted (MAC to PHY) classB CIR unicast octets.
HC-PerfHist-TC-MIBHCPerfTotalCount .1.0.8802.17.1.1.1.3.3.1.22
rprSpanDayOutUcastClassBEirFrames
The number of transmitted (MAC to PHY) classB EIR unicast
frames
HC-PerfHist-TC-MIBHCPerfTotalCount .1.0.8802.17.1.1.1.3.3.1.23
rprSpanDayOutUcastClassBEirOctets
The number of transmitted (MAC to PHY) classB EIR unicast
octets
HC-PerfHist-TC-MIBHCPerfTotalCount .1.0.8802.17.1.1.1.3.3.1.24
rprSpanDayOutUcastClassCFrames
The number of transmitted (MAC to PHY) classC unicast frames
HC-PerfHist-TC-MIBHCPerfTotalCount .1.0.8802.17.1.1.1.3.3.1.25
rprSpanDayOutUcastClassCOctets
The number of transmitted (MAC to PHY) classC unicast octets
HC-PerfHist-TC-MIBHCPerfTotalCount .1.0.8802.17.1.1.1.3.3.1.26
rprSpanDayOutMcastClassAFrames
The number of transmitted (MAC to PHY) classA multicast and broadcast
frames.
HC-PerfHist-TC-MIBHCPerfTotalCount .1.0.8802.17.1.1.1.3.3.1.27
rprSpanDayOutMcastClassAOctets
The number of transmitted (MAC to PHY) classA multicast and broadcast
octets.
HC-PerfHist-TC-MIBHCPerfTotalCount .1.0.8802.17.1.1.1.3.3.1.28
rprSpanDayOutMcastClassBCirFrames
The number of transmitted (MAC to PHY) classB CIR
multicast and broadcast frames.
HC-PerfHist-TC-MIBHCPerfTotalCount .1.0.8802.17.1.1.1.3.3.1.29
rprSpanDayOutMcastClassBCirOctets
The number of transmitted (MAC to PHY) classB CIR
multicast and broadcast octets.
HC-PerfHist-TC-MIBHCPerfTotalCount .1.0.8802.17.1.1.1.3.3.1.30
rprSpanDayOutMcastClassBEirFrames
The number of transmitted (MAC to PHY) classB EIR
multicast and broadcast frames.
HC-PerfHist-TC-MIBHCPerfTotalCount .1.0.8802.17.1.1.1.3.3.1.31
rprSpanDayOutMcastClassBEirOctets
The number of transmitted (MAC to PHY) classB EIR
multicast and broadcast octets.
HC-PerfHist-TC-MIBHCPerfTotalCount .1.0.8802.17.1.1.1.3.3.1.32
rprSpanDayOutMcastClassCFrames
The number of transmitted (MAC to PHY) classC multicast and broadcast
frames.
HC-PerfHist-TC-MIBHCPerfTotalCount .1.0.8802.17.1.1.1.3.3.1.33
rprSpanDayOutMcastClassCOctets
The number of transmitted (MAC to PHY) classC multicast and broadcast
octets.
HC-PerfHist-TC-MIBHCPerfTotalCount .1.0.8802.17.1.1.1.3.3.1.34

rprSpanCountersStatsTable

table
.1.0.8802.17.1.1.1.3.4 · 1 row entry · 48 columns
Open in standard view
Uses the rfc variant from /opt/observium/mibs/rfc.
Command help
Walk rprSpanCountersStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IEEE-802DOT17-RPR-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IEEE-802DOT17-RPR-MIB::rprSpanCountersStatsTable' 
The RPR Mac Span interface total counters table.
          
The DiscontinuityTime for this table is indicated by 
ifCounterDiscontinuityTime defined in ifXTable.
          
All attributes in this table are volatile,
i.e. will be cleared on system reset.
rprSpanCountersStatsEntry row .1.0.8802.17.1.1.1.3.4.1
An entry in the span stats table.
Indexes
Column Syntax OID
rprSpanStatsIfIndex
The ifIndex of this RPR interface.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.0.8802.17.1.1.1.3.4.1.1
rprSpanStatsSpan
An indication of the span of the interface for which this
row contains information.
RprSpan
Type Values:
1east
2west
 .1.0.8802.17.1.1.1.3.4.1.2
rprSpanStatsInUcastClassAFrames
The number of received (PHY to MAC) classA unicast frames.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.0.8802.17.1.1.1.3.4.1.3
rprSpanStatsInUcastClassAOctets
The number of received (PHY to MAC) classA unicast octets.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.0.8802.17.1.1.1.3.4.1.4
rprSpanStatsInUcastClassBCirFrames
The number of received (PHY to MAC) classB CIR unicast frames.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.0.8802.17.1.1.1.3.4.1.5
rprSpanStatsInUcastClassBCirOctets
The number of received (PHY to MAC) classB CIR unicast octets.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.0.8802.17.1.1.1.3.4.1.6
rprSpanStatsInUcastClassBEirFrames
The number of received (PHY to MAC) classB EIR unicast frames.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.0.8802.17.1.1.1.3.4.1.7
rprSpanStatsInUcastClassBEirOctets
The number of received (PHY to MAC) classB EIR unicast octets.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.0.8802.17.1.1.1.3.4.1.8
rprSpanStatsInUcastClassCFrames
The number of received (PHY to MAC) classC unicast frames.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.0.8802.17.1.1.1.3.4.1.9
rprSpanStatsInUcastClassCOctets
The number of received (PHY to MAC) classC unicast octets.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.0.8802.17.1.1.1.3.4.1.10
rprSpanStatsInMcastClassAFrames
The number of received (PHY to MAC) classA multicast and
broadcast frames
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.0.8802.17.1.1.1.3.4.1.11
rprSpanStatsInMcastClassAOctets
The number of received (PHY to MAC) classA multicast and
broadcast octets
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.0.8802.17.1.1.1.3.4.1.12
rprSpanStatsInMcastClassBCirFrames
The number of received (PHY to MAC) classB CIR multicast
and broadcast frames
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.0.8802.17.1.1.1.3.4.1.13
rprSpanStatsInMcastClassBCirOctets
The number of received (PHY to MAC) classB CIR multicast
and broadcast octets
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.0.8802.17.1.1.1.3.4.1.14
rprSpanStatsInMcastClassBEirFrames
The number of received (PHY to MAC) classB EIR multicast
and broadcast frames
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.0.8802.17.1.1.1.3.4.1.15
rprSpanStatsInMcastClassBEirOctets
The number of received (PHY to MAC) classB EIR multicast
and broadcast octets
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.0.8802.17.1.1.1.3.4.1.16
rprSpanStatsInMcastClassCFrames
The number of received (PHY to MAC) classC multicast and
broadcast frames
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.0.8802.17.1.1.1.3.4.1.17
rprSpanStatsInMcastClassCOctets
The number of received (PHY to MAC) classC multicast and
broadcast octets
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.0.8802.17.1.1.1.3.4.1.18
rprSpanStatsInCtrlFrames
The number of received (PHY to MAC) control frames
processed by this MAC.
This does not include control frames in transit,
i.e. a multicast control frame received from a ringlet
will be counted as In but not Out.
This d…
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.0.8802.17.1.1.1.3.4.1.19
rprSpanStatsInOamEchoFrames
The number of received (PHY to MAC) OAM echo
frames processed by this MAC.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.0.8802.17.1.1.1.3.4.1.20
rprSpanStatsInOamFlushFrames
The number of received (PHY to MAC) OAM flush
frames processed by this MAC.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.0.8802.17.1.1.1.3.4.1.21
rprSpanStatsInOamOrgFrames
The number of received (PHY to MAC) OAM Org
frames processed by this MAC.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.0.8802.17.1.1.1.3.4.1.22
rprSpanStatsInTopoAtdFrames
The number of received (PHY to MAC) Topology ATD
frames processed by this MAC.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.0.8802.17.1.1.1.3.4.1.23
rprSpanStatsInTopoChkSumFrames
The number of received (PHY to MAC) topology
checksum frames processed by this MAC.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.0.8802.17.1.1.1.3.4.1.24
rprSpanStatsInTopoTpFrames
The number of received (PHY to MAC) topology TP
frames processed by this MAC.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.0.8802.17.1.1.1.3.4.1.25
rprSpanStatsOutUcastClassAFrames
The number of transmitted (MAC to PHY) classA unicast frames.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.0.8802.17.1.1.1.3.4.1.26
rprSpanStatsOutUcastClassAOctets
The number of transmitted (MAC to PHY) classA unicast octets.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.0.8802.17.1.1.1.3.4.1.27
rprSpanStatsOutUcastClassBCirFrames
The number of transmitted (MAC to PHY) classB CIR unicast frames.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.0.8802.17.1.1.1.3.4.1.28
rprSpanStatsOutUcastClassBCirOctets
The number of transmitted (MAC to PHY) classB CIR unicast octets.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.0.8802.17.1.1.1.3.4.1.29
rprSpanStatsOutUcastClassBEirFrames
The number of transmitted (MAC to PHY) classB EIR unicast frames
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.0.8802.17.1.1.1.3.4.1.30
rprSpanStatsOutUcastClassBEirOctets
The number of transmitted (MAC to PHY) classB EIR unicast octets
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.0.8802.17.1.1.1.3.4.1.31
rprSpanStatsOutUcastClassCFrames
The number of transmitted (MAC to PHY) classC unicast frames
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.0.8802.17.1.1.1.3.4.1.32
rprSpanStatsOutUcastClassCOctets
The number of transmitted (MAC to PHY) classC unicast octets
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.0.8802.17.1.1.1.3.4.1.33
rprSpanStatsOutMcastClassAFrames
The number of transmitted (MAC to PHY) classA multicast and
broadcast frames.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.0.8802.17.1.1.1.3.4.1.34
rprSpanStatsOutMcastClassAOctets
The number of transmitted (MAC to PHY) classA multicast and
broadcast octets.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.0.8802.17.1.1.1.3.4.1.35
rprSpanStatsOutMcastClassBCirFrames
The number of transmitted (MAC to PHY) classB CIR
multicast and broadcast frames.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.0.8802.17.1.1.1.3.4.1.36
rprSpanStatsOutMcastClassBCirOctets
The number of transmitted (MAC to PHY) classB CIR
multicast and broadcast octets.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.0.8802.17.1.1.1.3.4.1.37
rprSpanStatsOutMcastClassBEirFrames
The number of transmitted (MAC to PHY) classB EIR
multicast and broadcast frames.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.0.8802.17.1.1.1.3.4.1.38
rprSpanStatsOutMcastClassBEirOctets
The number of transmitted (MAC to PHY) classB EIR
multicast and broadcast octets.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.0.8802.17.1.1.1.3.4.1.39
rprSpanStatsOutMcastClassCFrames
The number of transmitted (MAC to PHY) classC multicast and
broadcast frames.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.0.8802.17.1.1.1.3.4.1.40
rprSpanStatsOutMcastClassCOctets
The number of transmitted (MAC to PHY) classC multicast and
broadcast octets.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.0.8802.17.1.1.1.3.4.1.41
rprSpanStatsOutCtrlFrames
The number of transmitted (MAC to PHY) control frames
generated by this MAC.
This does not include control frames in transit,
i.e. a multicast control frame received from a ringlet
will be counted as In but not Out.
T…
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.0.8802.17.1.1.1.3.4.1.42
rprSpanStatsOutOamEchoFrames
The number of transmitted (MAC to PHY) OAM echo
frames generated by this MAC.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.0.8802.17.1.1.1.3.4.1.43
rprSpanStatsOutOamFlushFrames
The number of transmitted (MAC to PHY) OAM flush
frames generated by this MAC.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.0.8802.17.1.1.1.3.4.1.44
rprSpanStatsOutOamOrgFrames
The number of transmitted (MAC to PHY) OAM Org
frames generated by this MAC.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.0.8802.17.1.1.1.3.4.1.45
rprSpanStatsOutTopoAtdFrames
The number of transmitted (MAC to PHY) topology
ATD frames generated by this MAC.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.0.8802.17.1.1.1.3.4.1.46
rprSpanStatsOutTopoChkSumFrames
The number of transmitted (MAC to PHY) topology
checksum frames generated by this MAC.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.0.8802.17.1.1.1.3.4.1.47
rprSpanStatsOutTopoTpFrames
The number of transmitted (MAC to PHY) topology
TP frames generated by this MAC.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.0.8802.17.1.1.1.3.4.1.48

rprClientCountersCurrentTable

table
.1.0.8802.17.1.1.1.4.1 · 1 row entry · 33 columns
Open in standard view
Uses the rfc variant from /opt/observium/mibs/rfc.
Command help
Walk rprClientCountersCurrentTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IEEE-802DOT17-RPR-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IEEE-802DOT17-RPR-MIB::rprClientCountersCurrentTable' 
The local station traffic current counters table.
          
All attributes in this table are volatile,
i.e. will be cleared on system reset.
rprClientCountersCurrentEntry row .1.0.8802.17.1.1.1.4.1.1
Frames and octets statistics for the current interval for
the local station traffic of a particular RPR client interface.
The corresponding instance of rprIfTimeElapsed indicates
the number of seconds which have elapsed…
Indexes
Column Syntax OID
rprClientCurrentIfIndex
The ifIndex of this RPR interface.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.0.8802.17.1.1.1.4.1.1.1
rprClientCurrentInUcastClassAFrames
The number of MAC to client classA unicast frames in
the current interval.
HC-PerfHist-TC-MIBHCPerfCurrentCount .1.0.8802.17.1.1.1.4.1.1.2
rprClientCurrentInUcastClassAOctets
The number of MAC to client classA unicast octets in
the current interval.
HC-PerfHist-TC-MIBHCPerfCurrentCount .1.0.8802.17.1.1.1.4.1.1.3
rprClientCurrentInUcastClassBCirFrames
The number of MAC to client classB CIR unicast frames in
the current interval.
HC-PerfHist-TC-MIBHCPerfCurrentCount .1.0.8802.17.1.1.1.4.1.1.4
rprClientCurrentInUcastClassBCirOctets
The number of MAC to client classB CIR unicast octets
in the current interval.
HC-PerfHist-TC-MIBHCPerfCurrentCount .1.0.8802.17.1.1.1.4.1.1.5
rprClientCurrentInUcastClassBEirFrames
The number of MAC to client classB EIR unicast
frames in the current interval.
HC-PerfHist-TC-MIBHCPerfCurrentCount .1.0.8802.17.1.1.1.4.1.1.6
rprClientCurrentInUcastClassBEirOctets
The number of MAC to client classB EIR unicast
octets in the current interval.
HC-PerfHist-TC-MIBHCPerfCurrentCount .1.0.8802.17.1.1.1.4.1.1.7
rprClientCurrentInUcastClassCFrames
The number of MAC to client classC unicast frames in the
current interval.
HC-PerfHist-TC-MIBHCPerfCurrentCount .1.0.8802.17.1.1.1.4.1.1.8
rprClientCurrentInUcastClassCOctets
The number of MAC to client classC unicast octets in the
current interval.
HC-PerfHist-TC-MIBHCPerfCurrentCount .1.0.8802.17.1.1.1.4.1.1.9
rprClientCurrentInMcastClassAFrames
The number of MAC to client classA multicast and broadcast
frames in the current interval.
HC-PerfHist-TC-MIBHCPerfCurrentCount .1.0.8802.17.1.1.1.4.1.1.10
rprClientCurrentInMcastClassAOctets
The number of MAC to client classA multicast and broadcast
octets in the current interval.
HC-PerfHist-TC-MIBHCPerfCurrentCount .1.0.8802.17.1.1.1.4.1.1.11
rprClientCurrentInMcastClassBCirFrames
The number of MAC to client classB CIR
multicast and broadcast frames in the current interval.
HC-PerfHist-TC-MIBHCPerfCurrentCount .1.0.8802.17.1.1.1.4.1.1.12
rprClientCurrentInMcastClassBCirOctets
The number of MAC to client classB CIR
multicast and broadcast octets in the current interval.
HC-PerfHist-TC-MIBHCPerfCurrentCount .1.0.8802.17.1.1.1.4.1.1.13
rprClientCurrentInMcastClassBEirFrames
The number of MAC to client classB EIR
multicast and broadcast frames in the current interval.
HC-PerfHist-TC-MIBHCPerfCurrentCount .1.0.8802.17.1.1.1.4.1.1.14
rprClientCurrentInMcastClassBEirOctets
The number of MAC to client classB EIR
multicast and broadcast octets in the current interval.
HC-PerfHist-TC-MIBHCPerfCurrentCount .1.0.8802.17.1.1.1.4.1.1.15
rprClientCurrentInMcastClassCFrames
The number of MAC to client classC multicast and broadcast
frames in the current interval.
HC-PerfHist-TC-MIBHCPerfCurrentCount .1.0.8802.17.1.1.1.4.1.1.16
rprClientCurrentInMcastClassCOctets
The number of MAC to client classC multicast and broadcast
octets in the current interval.
HC-PerfHist-TC-MIBHCPerfCurrentCount .1.0.8802.17.1.1.1.4.1.1.17
rprClientCurrentOutUcastClassAFrames
The number of client to MAC classA unicast frames
in the current interval.
HC-PerfHist-TC-MIBHCPerfCurrentCount .1.0.8802.17.1.1.1.4.1.1.18
rprClientCurrentOutUcastClassAOctets
The number of client to MAC classA unicast octets
in the current interval.
HC-PerfHist-TC-MIBHCPerfCurrentCount .1.0.8802.17.1.1.1.4.1.1.19
rprClientCurrentOutUcastClassBCirFrames
The number of client to MAC classB CIR unicast
frames in the current interval.
HC-PerfHist-TC-MIBHCPerfCurrentCount .1.0.8802.17.1.1.1.4.1.1.20
rprClientCurrentOutUcastClassBCirOctets
The number of client to MAC classB CIR unicast
octets in the current interval.
HC-PerfHist-TC-MIBHCPerfCurrentCount .1.0.8802.17.1.1.1.4.1.1.21
rprClientCurrentOutUcastClassBEirFrames
The number of client to MAC classB EIR unicast
frames in the current interval.
HC-PerfHist-TC-MIBHCPerfCurrentCount .1.0.8802.17.1.1.1.4.1.1.22
rprClientCurrentOutUcastClassBEirOctets
The number of client to MAC classB EIR unicast
octets in the current interval.
HC-PerfHist-TC-MIBHCPerfCurrentCount .1.0.8802.17.1.1.1.4.1.1.23
rprClientCurrentOutUcastClassCFrames
The number of client to MAC classC unicast frames
in the current interval.
HC-PerfHist-TC-MIBHCPerfCurrentCount .1.0.8802.17.1.1.1.4.1.1.24
rprClientCurrentOutUcastClassCOctets
The number of client to MAC classC unicast octets
in the current interval.
HC-PerfHist-TC-MIBHCPerfCurrentCount .1.0.8802.17.1.1.1.4.1.1.25
rprClientCurrentOutMcastClassAFrames
The number of client to MAC classA multicast and broadcast
frames in the current interval.
HC-PerfHist-TC-MIBHCPerfCurrentCount .1.0.8802.17.1.1.1.4.1.1.26
rprClientCurrentOutMcastClassAOctets
The number of client to MAC classA multicast and broadcast
octets in the current interval.
HC-PerfHist-TC-MIBHCPerfCurrentCount .1.0.8802.17.1.1.1.4.1.1.27
rprClientCurrentOutMcastClassBCirFrames
The number of client to MAC classB CIR
multicast and broadcast frames in the current interval.
HC-PerfHist-TC-MIBHCPerfCurrentCount .1.0.8802.17.1.1.1.4.1.1.28
rprClientCurrentOutMcastClassBCirOctets
The number of client to MAC classB CIR
multicast and broadcast octets in the current interval.
HC-PerfHist-TC-MIBHCPerfCurrentCount .1.0.8802.17.1.1.1.4.1.1.29
rprClientCurrentOutMcastClassBEirFrames
The number of client to MAC classB EIR
multicast and broadcast frames in the current interval.
HC-PerfHist-TC-MIBHCPerfCurrentCount .1.0.8802.17.1.1.1.4.1.1.30
rprClientCurrentOutMcastClassBEirOctets
The number of client to MAC classB EIR
multicast and broadcast octets in the current interval.
HC-PerfHist-TC-MIBHCPerfCurrentCount .1.0.8802.17.1.1.1.4.1.1.31
rprClientCurrentOutMcastClassCFrames
The number of client to MAC classC multicast and broadcast
frames in the current interval.
HC-PerfHist-TC-MIBHCPerfCurrentCount .1.0.8802.17.1.1.1.4.1.1.32
rprClientCurrentOutMcastClassCOctets
The number of client to MAC classC multicast and broadcast
octets in the current interval.
HC-PerfHist-TC-MIBHCPerfCurrentCount .1.0.8802.17.1.1.1.4.1.1.33

rprClientCountersIntervalTable

table
.1.0.8802.17.1.1.1.4.2 · 1 row entry · 36 columns
Open in standard view
Uses the rfc variant from /opt/observium/mibs/rfc.
Command help
Walk rprClientCountersIntervalTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IEEE-802DOT17-RPR-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IEEE-802DOT17-RPR-MIB::rprClientCountersIntervalTable' 
The local station traffic interval counters table.
          
All attributes in this table are volatile,
i.e. will be cleared on system reset.
rprClientCountersIntervalEntry row .1.0.8802.17.1.1.1.4.2.1
Frames and octets statistics collected for a particular
interval for local station traffic of a particular RPR
interface.
The corresponding instance of rprIfValidIntervals indicates
the number of intervals for which th…
Indexes
Column Syntax OID
rprClientIntervalIfIndex
The ifIndex of this RPR interface.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.0.8802.17.1.1.1.4.2.1.1
rprClientIntervalNumber
A number between 1 and 96, which identifies the interval
for which the set of statistics is available. The interval
identified by 1 is the most recently completed 15 minute
interval, and interval identified by N is the …
Unsigned32
Constraints:
range: 1-96
 .1.0.8802.17.1.1.1.4.2.1.2
rprClientIntervalValidData
This variable indicates if the data for this interval
is valid.
It will be valid if it contains data for 900 seconds
plus or minus 10 seconds.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.0.8802.17.1.1.1.4.2.1.3
rprClientIntervalTimeElapsed
The duration of a particular interval in seconds.
If, for some reason, such as an adjustment in the system's
time-of-day clock, the current interval exceeds the maximum
value, the agent will return the maximum value.
SecondsUnsigned32
Constraints:
range: 0-899
 .1.0.8802.17.1.1.1.4.2.1.4
rprClientIntervalInUcastClassAFrames
The number of MAC to client classA unicast frames
in a particular interval in the past 24 hours.
HC-PerfHist-TC-MIBHCPerfIntervalCount .1.0.8802.17.1.1.1.4.2.1.5
rprClientIntervalInUcastClassAOctets
The number of MAC to client classA unicast octets
in a particular interval in the past 24 hours.
HC-PerfHist-TC-MIBHCPerfIntervalCount .1.0.8802.17.1.1.1.4.2.1.6
rprClientIntervalInUcastClassBCirFrames
The number of MAC to client classB CIR unicast frames
in a particular interval in the past 24 hours.
HC-PerfHist-TC-MIBHCPerfIntervalCount .1.0.8802.17.1.1.1.4.2.1.7
rprClientIntervalInUcastClassBCirOctets
The number of MAC to client classB CIR unicast octets
in a particular interval in the past 24 hours.
HC-PerfHist-TC-MIBHCPerfIntervalCount .1.0.8802.17.1.1.1.4.2.1.8
rprClientIntervalInUcastClassBEirFrames
The number of MAC to client classB EIR unicast
frames in a particular interval in the past 24 hours.
HC-PerfHist-TC-MIBHCPerfIntervalCount .1.0.8802.17.1.1.1.4.2.1.9
rprClientIntervalInUcastClassBEirOctets
The number of MAC to client classB EIR unicast
octets in a particular interval in the past 24 hours.
HC-PerfHist-TC-MIBHCPerfIntervalCount .1.0.8802.17.1.1.1.4.2.1.10
rprClientIntervalInUcastClassCFrames
The number of MAC to client classC unicast
frames in a particular interval in the past 24 hours.
HC-PerfHist-TC-MIBHCPerfIntervalCount .1.0.8802.17.1.1.1.4.2.1.11
rprClientIntervalInUcastClassCOctets
The number of MAC to client classC unicast
octets in a particular interval in the past 24 hours.
HC-PerfHist-TC-MIBHCPerfIntervalCount .1.0.8802.17.1.1.1.4.2.1.12
rprClientIntervalInMcastClassAFrames
The number of MAC to client classA multicast and broadcast
frames in a particular interval in the past 24 hours.
HC-PerfHist-TC-MIBHCPerfIntervalCount .1.0.8802.17.1.1.1.4.2.1.13
rprClientIntervalInMcastClassAOctets
The number of MAC to client classA multicast and broadcast
octets in a particular interval in the past 24 hours.
HC-PerfHist-TC-MIBHCPerfIntervalCount .1.0.8802.17.1.1.1.4.2.1.14
rprClientIntervalInMcastClassBCirFrames
The number of MAC to client classB CIR multicast and
broadcast frames in a particular interval in the past
24 hours.
HC-PerfHist-TC-MIBHCPerfIntervalCount .1.0.8802.17.1.1.1.4.2.1.15
rprClientIntervalInMcastClassBCirOctets
The number of MAC to client classB CIR multicast and
broadcast octets in a particular interval in the past
24 hours.
HC-PerfHist-TC-MIBHCPerfIntervalCount .1.0.8802.17.1.1.1.4.2.1.16
rprClientIntervalInMcastClassBEirFrames
The number of MAC to client classB EIR multicast and
broadcast frames in a particular interval in the past
24 hours.
HC-PerfHist-TC-MIBHCPerfIntervalCount .1.0.8802.17.1.1.1.4.2.1.17
rprClientIntervalInMcastClassBEirOctets
The number of MAC to client classB EIR multicast and
broadcast octets in a particular interval in the past
24 hours.
HC-PerfHist-TC-MIBHCPerfIntervalCount .1.0.8802.17.1.1.1.4.2.1.18
rprClientIntervalInMcastClassCFrames
The number of MAC to client classC multicast and broadcast
frames in a particular interval in the past 24 hours.
HC-PerfHist-TC-MIBHCPerfIntervalCount .1.0.8802.17.1.1.1.4.2.1.19
rprClientIntervalInMcastClassCOctets
The number of MAC to client classC multicast and broadcast
octets in a particular interval in the past 24 hours.
HC-PerfHist-TC-MIBHCPerfIntervalCount .1.0.8802.17.1.1.1.4.2.1.20
rprClientIntervalOutUcastClassAFrames
The number of client to MAC classA unicast frames
in a particular interval in the past 24 hours.
HC-PerfHist-TC-MIBHCPerfIntervalCount .1.0.8802.17.1.1.1.4.2.1.21
rprClientIntervalOutUcastClassAOctets
The number of client to MAC classA unicast octets
in a particular interval in the past 24 hours.
HC-PerfHist-TC-MIBHCPerfIntervalCount .1.0.8802.17.1.1.1.4.2.1.22
rprClientIntervalOutUcastClassBCirFrames
The number of client to MAC classB CIR unicast frames
in a particular interval in the past 24 hours.
HC-PerfHist-TC-MIBHCPerfIntervalCount .1.0.8802.17.1.1.1.4.2.1.23
rprClientIntervalOutUcastClassBCirOctets
The number of client to MAC classB CIR unicast octets
in a particular interval in the past 24 hours.
HC-PerfHist-TC-MIBHCPerfIntervalCount .1.0.8802.17.1.1.1.4.2.1.24
rprClientIntervalOutUcastClassBEirFrames
The number of client to MAC classB EIR unicast
frames in a particular interval in the past 24 hours.
HC-PerfHist-TC-MIBHCPerfIntervalCount .1.0.8802.17.1.1.1.4.2.1.25
rprClientIntervalOutUcastClassBEirOctets
The number of client to MAC classB EIR unicast
octets in a particular interval in the past 24 hours.
HC-PerfHist-TC-MIBHCPerfIntervalCount .1.0.8802.17.1.1.1.4.2.1.26
rprClientIntervalOutUcastClassCFrames
The number of client to MAC classC unicast
frames in a particular interval in the past 24 hours.
HC-PerfHist-TC-MIBHCPerfIntervalCount .1.0.8802.17.1.1.1.4.2.1.27
rprClientIntervalOutUcastClassCOctets
The number of client to MAC classC unicast
octets in a particular interval in the past 24 hours.
HC-PerfHist-TC-MIBHCPerfIntervalCount .1.0.8802.17.1.1.1.4.2.1.28
rprClientIntervalOutMcastClassAFrames
The number of client to MAC classA multicast and broadcast
frames in a particular interval in the past 24 hours.
HC-PerfHist-TC-MIBHCPerfIntervalCount .1.0.8802.17.1.1.1.4.2.1.29
rprClientIntervalOutMcastClassAOctets
The number of client to MAC classA multicast and broadcast
octets in a particular interval in the past 24 hours.
HC-PerfHist-TC-MIBHCPerfIntervalCount .1.0.8802.17.1.1.1.4.2.1.30
rprClientIntervalOutMcastClassBCirFrames
The number of client to MAC classB CIR multicast
and broadcast frames in a particular interval in the
past 24 hours.
HC-PerfHist-TC-MIBHCPerfIntervalCount .1.0.8802.17.1.1.1.4.2.1.31
rprClientIntervalOutMcastClassBCirOctets
The number of client to MAC classB CIR multicast
and broadcast octets in a particular interval in the
past 24 hours.
HC-PerfHist-TC-MIBHCPerfIntervalCount .1.0.8802.17.1.1.1.4.2.1.32
rprClientIntervalOutMcastClassBEirFrames
The number of client to MAC classB EIR multicast
and broadcast frames in a particular interval in the
past 24 hours.
HC-PerfHist-TC-MIBHCPerfIntervalCount .1.0.8802.17.1.1.1.4.2.1.33
rprClientIntervalOutMcastClassBEirOctets
The number of client to MAC classB EIR multicast
and broadcast octets in a particular interval in the
past 24 hours.
HC-PerfHist-TC-MIBHCPerfIntervalCount .1.0.8802.17.1.1.1.4.2.1.34
rprClientIntervalOutMcastClassCFrames
The number of client to MAC classC multicast and broadcast
frames in a particular interval in the past 24 hours.
HC-PerfHist-TC-MIBHCPerfIntervalCount .1.0.8802.17.1.1.1.4.2.1.35
rprClientIntervalOutMcastClassCOctets
The number of client to MAC classC multicast and broadcast
octets in a particular interval in the past 24 hours.
HC-PerfHist-TC-MIBHCPerfIntervalCount .1.0.8802.17.1.1.1.4.2.1.36

rprClientCountersDayTable

table
.1.0.8802.17.1.1.1.4.3 · 1 row entry · 33 columns
Open in standard view
Uses the rfc variant from /opt/observium/mibs/rfc.
Command help
Walk rprClientCountersDayTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IEEE-802DOT17-RPR-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IEEE-802DOT17-RPR-MIB::rprClientCountersDayTable' 
The RPR Mac Client Day Table contains the cumulative sum
of the various statistics for the 24 hour period
preceding the current interval.
          
All attributes in this table are volatile,
i.e. will be cleared on system reset.
rprClientCountersDayEntry row .1.0.8802.17.1.1.1.4.3.1
An entry in the RPR Client Day table.
Indexes
Column Syntax OID
rprClientDayIfIndex
The ifIndex of this RPR interface.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.0.8802.17.1.1.1.4.3.1.1
rprClientDayInUcastClassAFrames
The number of MAC to client classA unicast frames.
HC-PerfHist-TC-MIBHCPerfTotalCount .1.0.8802.17.1.1.1.4.3.1.2
rprClientDayInUcastClassAOctets
The number of MAC to client classA unicast octets.
HC-PerfHist-TC-MIBHCPerfTotalCount .1.0.8802.17.1.1.1.4.3.1.3
rprClientDayInUcastClassBCirFrames
The number of MAC to client classB CIR unicast frames.
HC-PerfHist-TC-MIBHCPerfTotalCount .1.0.8802.17.1.1.1.4.3.1.4
rprClientDayInUcastClassBCirOctets
The number of MAC to client classB CIR unicast octets.
HC-PerfHist-TC-MIBHCPerfTotalCount .1.0.8802.17.1.1.1.4.3.1.5
rprClientDayInUcastClassBEirFrames
The number of MAC to client classB EIR unicast frames.
HC-PerfHist-TC-MIBHCPerfTotalCount .1.0.8802.17.1.1.1.4.3.1.6
rprClientDayInUcastClassBEirOctets
The number of MAC to client classB EIR unicast octets.
HC-PerfHist-TC-MIBHCPerfTotalCount .1.0.8802.17.1.1.1.4.3.1.7
rprClientDayInUcastClassCFrames
The number of MAC to client classC unicast frames.
HC-PerfHist-TC-MIBHCPerfTotalCount .1.0.8802.17.1.1.1.4.3.1.8
rprClientDayInUcastClassCOctets
The number of MAC to client classC unicast octets.
HC-PerfHist-TC-MIBHCPerfTotalCount .1.0.8802.17.1.1.1.4.3.1.9
rprClientDayInMcastClassAFrames
The number of MAC to client classA multicast and broadcast frames
HC-PerfHist-TC-MIBHCPerfTotalCount .1.0.8802.17.1.1.1.4.3.1.10
rprClientDayInMcastClassAOctets
The number of MAC to client classA multicast and broadcast octets
HC-PerfHist-TC-MIBHCPerfTotalCount .1.0.8802.17.1.1.1.4.3.1.11
rprClientDayInMcastClassBCirFrames
The number of MAC to client classB CIR multicast
and broadcast frames
HC-PerfHist-TC-MIBHCPerfTotalCount .1.0.8802.17.1.1.1.4.3.1.12
rprClientDayInMcastClassBCirOctets
The number of MAC to client classB CIR multicast
and broadcast octets
HC-PerfHist-TC-MIBHCPerfTotalCount .1.0.8802.17.1.1.1.4.3.1.13
rprClientDayInMcastClassBEirFrames
The number of MAC to client classB EIR multicast
and broadcast frames
HC-PerfHist-TC-MIBHCPerfTotalCount .1.0.8802.17.1.1.1.4.3.1.14
rprClientDayInMcastClassBEirOctets
The number of MAC to client classB EIR multicast
and broadcast octets
HC-PerfHist-TC-MIBHCPerfTotalCount .1.0.8802.17.1.1.1.4.3.1.15
rprClientDayInMcastClassCFrames
The number of MAC to client classC multicast and broadcast frames
HC-PerfHist-TC-MIBHCPerfTotalCount .1.0.8802.17.1.1.1.4.3.1.16
rprClientDayInMcastClassCOctets
The number of MAC to client classC multicast and broadcast octets
HC-PerfHist-TC-MIBHCPerfTotalCount .1.0.8802.17.1.1.1.4.3.1.17
rprClientDayOutUcastClassAFrames
The number of client to MAC classA unicast frames.
HC-PerfHist-TC-MIBHCPerfTotalCount .1.0.8802.17.1.1.1.4.3.1.18
rprClientDayOutUcastClassAOctets
The number of client to MAC classA unicast octets.
HC-PerfHist-TC-MIBHCPerfTotalCount .1.0.8802.17.1.1.1.4.3.1.19
rprClientDayOutUcastClassBCirFrames
The number of client to MAC classB CIR unicast frames.
HC-PerfHist-TC-MIBHCPerfTotalCount .1.0.8802.17.1.1.1.4.3.1.20
rprClientDayOutUcastClassBCirOctets
The number of client to MAC classB CIR unicast octets.
HC-PerfHist-TC-MIBHCPerfTotalCount .1.0.8802.17.1.1.1.4.3.1.21
rprClientDayOutUcastClassBEirFrames
The number of client to MAC classB EIR unicast
frames
HC-PerfHist-TC-MIBHCPerfTotalCount .1.0.8802.17.1.1.1.4.3.1.22
rprClientDayOutUcastClassBEirOctets
The number of client to MAC classB EIR unicast
octets
HC-PerfHist-TC-MIBHCPerfTotalCount .1.0.8802.17.1.1.1.4.3.1.23
rprClientDayOutUcastClassCFrames
The number of client to MAC classC unicast frames
HC-PerfHist-TC-MIBHCPerfTotalCount .1.0.8802.17.1.1.1.4.3.1.24
rprClientDayOutUcastClassCOctets
The number of client to MAC classC unicast octets
HC-PerfHist-TC-MIBHCPerfTotalCount .1.0.8802.17.1.1.1.4.3.1.25
rprClientDayOutMcastClassAFrames
The number of client to MAC classA multicast and broadcast
frames.
HC-PerfHist-TC-MIBHCPerfTotalCount .1.0.8802.17.1.1.1.4.3.1.26
rprClientDayOutMcastClassAOctets
The number of client to MAC classA multicast and broadcast
octets.
HC-PerfHist-TC-MIBHCPerfTotalCount .1.0.8802.17.1.1.1.4.3.1.27
rprClientDayOutMcastClassBCirFrames
The number of client to MAC classB CIR
multicast and broadcast frames.
HC-PerfHist-TC-MIBHCPerfTotalCount .1.0.8802.17.1.1.1.4.3.1.28
rprClientDayOutMcastClassBCirOctets
The number of client to MAC classB CIR
multicast and broadcast octets.
HC-PerfHist-TC-MIBHCPerfTotalCount .1.0.8802.17.1.1.1.4.3.1.29
rprClientDayOutMcastClassBEirFrames
The number of client to MAC classB EIR
multicast and broadcast frames.
HC-PerfHist-TC-MIBHCPerfTotalCount .1.0.8802.17.1.1.1.4.3.1.30
rprClientDayOutMcastClassBEirOctets
The number of client to MAC classB EIR
multicast and broadcast octets.
HC-PerfHist-TC-MIBHCPerfTotalCount .1.0.8802.17.1.1.1.4.3.1.31
rprClientDayOutMcastClassCFrames
The number of client to MAC classC multicast and broadcast
frames.
HC-PerfHist-TC-MIBHCPerfTotalCount .1.0.8802.17.1.1.1.4.3.1.32
rprClientDayOutMcastClassCOctets
The number of client to MAC classC multicast and broadcast
octets.
HC-PerfHist-TC-MIBHCPerfTotalCount .1.0.8802.17.1.1.1.4.3.1.33

rprClientCountersStatsTable

table
.1.0.8802.17.1.1.1.4.4 · 1 row entry · 35 columns
Open in standard view
Uses the rfc variant from /opt/observium/mibs/rfc.
Command help
Walk rprClientCountersStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IEEE-802DOT17-RPR-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IEEE-802DOT17-RPR-MIB::rprClientCountersStatsTable' 
The local station traffic total counters table.
          
The DiscontinuityTime for this table is indicated by 
ifCounterDiscontinuityTime defined in ifXTable.
          
All attributes in this table are volatile,
i.e. will be cleared on system reset.
rprClientCountersStatsEntry row .1.0.8802.17.1.1.1.4.4.1
An entry in the span stats table.
Indexes
Column Syntax OID
rprClientStatsIfIndex
The ifIndex of this RPR interface.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.0.8802.17.1.1.1.4.4.1.1
rprClientStatsInUcastClassAFrames
The number of MAC to client classA unicast frames.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.0.8802.17.1.1.1.4.4.1.2
rprClientStatsInUcastClassAOctets
The number of MAC to client classA unicast octets.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.0.8802.17.1.1.1.4.4.1.3
rprClientStatsInUcastClassBCirFrames
The number of MAC to client classB CIR unicast frames.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.0.8802.17.1.1.1.4.4.1.4
rprClientStatsInUcastClassBCirOctets
The number of MAC to client classB CIR unicast octets.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.0.8802.17.1.1.1.4.4.1.5
rprClientStatsInUcastClassBEirFrames
The number of MAC to client classB EIR unicast frames.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.0.8802.17.1.1.1.4.4.1.6
rprClientStatsInUcastClassBEirOctets
The number of MAC to client classB EIR unicast octets.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.0.8802.17.1.1.1.4.4.1.7
rprClientStatsInUcastClassCFrames
The number of MAC to client classC unicast frames.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.0.8802.17.1.1.1.4.4.1.8
rprClientStatsInUcastClassCOctets
The number of MAC to client classC unicast octets.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.0.8802.17.1.1.1.4.4.1.9
rprClientStatsInMcastClassAFrames
The number of MAC to client classA multicast and broadcast frames
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.0.8802.17.1.1.1.4.4.1.10
rprClientStatsInMcastClassAOctets
The number of MAC to client classA multicast and broadcast octets
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.0.8802.17.1.1.1.4.4.1.11
rprClientStatsInMcastClassBCirFrames
The number of MAC to client classB CIR multicast
and broadcast frames
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.0.8802.17.1.1.1.4.4.1.12
rprClientStatsInMcastClassBCirOctets
The number of MAC to client classB CIR multicast
and broadcast octets
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.0.8802.17.1.1.1.4.4.1.13
rprClientStatsInMcastClassBEirFrames
The number of MAC to client classB EIR multicast
and broadcast frames
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.0.8802.17.1.1.1.4.4.1.14
rprClientStatsInMcastClassBEirOctets
The number of MAC to client classB EIR multicast
and broadcast octets
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.0.8802.17.1.1.1.4.4.1.15
rprClientStatsInMcastClassCFrames
The number of MAC to client classC multicast and broadcast frames
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.0.8802.17.1.1.1.4.4.1.16
rprClientStatsInMcastClassCOctets
The number of MAC to client classC multicast and broadcast octets
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.0.8802.17.1.1.1.4.4.1.17
rprClientStatsInBcastFrames
The number of MAC to client broadcast frames.
This is used only when deriving the multicast
and broadcast packet counters for the interface MIB.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.0.8802.17.1.1.1.4.4.1.18
rprClientStatsOutUcastClassAFrames
The number of client to MAC classA unicast frames.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.0.8802.17.1.1.1.4.4.1.19
rprClientStatsOutUcastClassAOctets
The number of client to MAC classA unicast octets.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.0.8802.17.1.1.1.4.4.1.20
rprClientStatsOutUcastClassBCirFrames
The number of client to MAC classB CIR unicast frames.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.0.8802.17.1.1.1.4.4.1.21
rprClientStatsOutUcastClassBCirOctets
The number of client to MAC classB CIR unicast octets.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.0.8802.17.1.1.1.4.4.1.22
rprClientStatsOutUcastClassBEirFrames
The number of client to MAC classB EIR unicast
frames
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.0.8802.17.1.1.1.4.4.1.23
rprClientStatsOutUcastClassBEirOctets
The number of client to MAC classB EIR unicast
octets
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.0.8802.17.1.1.1.4.4.1.24
rprClientStatsOutUcastClassCFrames
The number of client to MAC classC unicast frames
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.0.8802.17.1.1.1.4.4.1.25
rprClientStatsOutUcastClassCOctets
The number of client to MAC classC unicast octets
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.0.8802.17.1.1.1.4.4.1.26
rprClientStatsOutMcastClassAFrames
The number of client to MAC classA multicast and broadcast
frames.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.0.8802.17.1.1.1.4.4.1.27
rprClientStatsOutMcastClassAOctets
The number of client to MAC classA multicast and broadcast
octets.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.0.8802.17.1.1.1.4.4.1.28
rprClientStatsOutMcastClassBCirFrames
The number of client to MAC classB CIR
multicast and broadcast frames.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.0.8802.17.1.1.1.4.4.1.29
rprClientStatsOutMcastClassBCirOctets
The number of client to MAC classB CIR
multicast and broadcast octets.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.0.8802.17.1.1.1.4.4.1.30
rprClientStatsOutMcastClassBEirFrames
The number of client to MAC classB EIR
multicast and broadcast frames.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.0.8802.17.1.1.1.4.4.1.31
rprClientStatsOutMcastClassBEirOctets
The number of client to MAC classB EIR
multicast and broadcast octets.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.0.8802.17.1.1.1.4.4.1.32
rprClientStatsOutMcastClassCFrames
The number of client to MAC classC multicast and broadcast
frames.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.0.8802.17.1.1.1.4.4.1.33
rprClientStatsOutMcastClassCOctets
The number of client to MAC classC multicast and broadcast
octets.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.0.8802.17.1.1.1.4.4.1.34
rprClientStatsOutBcastFrames
The number of client to MAC broadcast frames.
This is used only when deriving the multicast
and broadcast packet counters for the interface MIB.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.0.8802.17.1.1.1.4.4.1.35

rprSpanErrorCountersCurrentTable

table
.1.0.8802.17.1.1.1.5.1 · 1 row entry · 16 columns
Open in standard view
Uses the rfc variant from /opt/observium/mibs/rfc.
Command help
Walk rprSpanErrorCountersCurrentTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IEEE-802DOT17-RPR-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IEEE-802DOT17-RPR-MIB::rprSpanErrorCountersCurrentTable' 
The RPR Errors Current counters table.
          
All attributes in this table are volatile,
i.e. will be cleared on system reset.
rprSpanErrorCountersCurrentEntry row .1.0.8802.17.1.1.1.5.1.1
Errors statistics for the current interval of a particular
span of a particular RPR interface.
The corresponding instance of rprIfTimeElapsed indicates
the number of seconds which have elapsed so far in the
current inte…
Indexes
Column Syntax OID
rprSpanErrorCurrentIfIndex
The ifIndex of this RPR interface.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.0.8802.17.1.1.1.5.1.1.1
rprSpanErrorCurrentSpan
An indication of the span of the interface for which this
row contains information.
RprSpan
Type Values:
1east
2west
 .1.0.8802.17.1.1.1.5.1.1.2
rprSpanErrorCurrentTtlExpFrames
The number of received (PHY to MAC) data frames that were dropped
due to zero Time To Live (TTL).
HC-PerfHist-TC-MIBHCPerfCurrentCount .1.0.8802.17.1.1.1.5.1.1.3
rprSpanErrorCurrentTooLongFrames
The number of received (PHY to MAC) frames that exceed the
maximum permitted frame size.
HC-PerfHist-TC-MIBHCPerfCurrentCount .1.0.8802.17.1.1.1.5.1.1.4
rprSpanErrorCurrentTooShortFrames
The number of received (PHY to MAC) frames shortest than the
minimum permitted frame size.
HC-PerfHist-TC-MIBHCPerfCurrentCount .1.0.8802.17.1.1.1.5.1.1.5
rprSpanErrorCurrentBadHecFrames
The number of received (PHY to MAC) frames with HEC error.
HC-PerfHist-TC-MIBHCPerfCurrentCount .1.0.8802.17.1.1.1.5.1.1.6
rprSpanErrorCurrentBadFcsFrames
The number of received (PHY to MAC) data and control frames
where the fcs value did not match the expected fcs value.

This includes data frames passed to the client as a result of
rprIfMacOperModes being …
HC-PerfHist-TC-MIBHCPerfCurrentCount .1.0.8802.17.1.1.1.5.1.1.7
rprSpanErrorCurrentSelfSrcUcastFrames
The number of received (PHY to MAC) unicast frames that were
transmitted by the station itself i.e.
the source MAC is equal to the interface MAC.
HC-PerfHist-TC-MIBHCPerfCurrentCount .1.0.8802.17.1.1.1.5.1.1.8
rprSpanErrorCurrentPmdAbortFrames
The number of received (PHY to MAC) frames that were
aborted by the PMD.
HC-PerfHist-TC-MIBHCPerfCurrentCount .1.0.8802.17.1.1.1.5.1.1.9
rprSpanErrorCurrentBadAddrFrames
The number of received (PHY to MAC) frames
with invalid SA value.
HC-PerfHist-TC-MIBHCPerfCurrentCount .1.0.8802.17.1.1.1.5.1.1.10
rprSpanErrorCurrentBadParityFrames
The number of received (PHY to MAC) frames
parity value not matching the expected parity value
HC-PerfHist-TC-MIBHCPerfCurrentCount .1.0.8802.17.1.1.1.5.1.1.11
rprSpanErrorCurrentContainedFrames
The number of received (PHY to MAC) frames
that were removed due to context containment
HC-PerfHist-TC-MIBHCPerfCurrentCount .1.0.8802.17.1.1.1.5.1.1.12
rprSpanErrorCurrentScffErrors
The number of received (PHY to MAC) errored SCFF,
with bad parity, bad FCS, or both.
HC-PerfHist-TC-MIBHCPerfCurrentCount .1.0.8802.17.1.1.1.5.1.1.13
rprSpanErrorCurrentErroredSeconds
The number of errored seconds.
HC-PerfHist-TC-MIBHCPerfCurrentCount .1.0.8802.17.1.1.1.5.1.1.14
rprSpanErrorCurrentSeverelyErroredSeconds
The number of severely errored seconds.
HC-PerfHist-TC-MIBHCPerfCurrentCount .1.0.8802.17.1.1.1.5.1.1.15
rprSpanErrorCurrentUnavailableSeconds
The number of unavailable seconds.
HC-PerfHist-TC-MIBHCPerfCurrentCount .1.0.8802.17.1.1.1.5.1.1.16

rprSpanErrorCountersIntervalTable

table
.1.0.8802.17.1.1.1.5.2 · 1 row entry · 19 columns
Open in standard view
Uses the rfc variant from /opt/observium/mibs/rfc.
Command help
Walk rprSpanErrorCountersIntervalTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IEEE-802DOT17-RPR-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IEEE-802DOT17-RPR-MIB::rprSpanErrorCountersIntervalTable' 
The RPR Errors Interval counters table.
          
All attributes in this table are volatile,
i.e. will be cleared on system reset.
rprSpanErrorCountersIntervalEntry row .1.0.8802.17.1.1.1.5.2.1
Error statistics collected for a particular interval of a
particular span of a particular RPR interface.
The corresponding instance of rprIfValidIntervals indicates
the number of intervals for which the set of statistic…
Indexes
Column Syntax OID
rprSpanErrorIntervalIfIndex
The ifIndex of this RPR interface.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.0.8802.17.1.1.1.5.2.1.1
rprSpanErrorIntervalSpan
An indication of the span of the interface for which this
row contains information.
RprSpan
Type Values:
1east
2west
 .1.0.8802.17.1.1.1.5.2.1.2
rprSpanErrorIntervalNumber
A number between 1 and 96, which identifies the interval
for which the set of statistics is available. The interval
identified by 1 is the most recently completed 15 minute
interval, and interval identified by N is the …
Unsigned32
Constraints:
range: 1-96
 .1.0.8802.17.1.1.1.5.2.1.3
rprSpanErrorIntervalValidData
This variable indicates if the data for this interval
is valid.
It will be valid if it contains data for 900 seconds
plus or minus 10 seconds.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.0.8802.17.1.1.1.5.2.1.4
rprSpanErrorIntervalTimeElapsed
The duration of a particular interval in seconds.
If, for some reason, such as an adjustment in the system's
time-of-day clock, the current interval exceeds the maximum
value, the agent will return the maximum value.
SecondsUnsigned32
Constraints:
range: 0-899
 .1.0.8802.17.1.1.1.5.2.1.5
rprSpanErrorIntervalTtlExpFrames
The number of received (PHY to MAC) frames that were dropped due to
zero Time To Live (TTL) in a particular interval in the
past 24 hours
HC-PerfHist-TC-MIBHCPerfIntervalCount .1.0.8802.17.1.1.1.5.2.1.6
rprSpanErrorIntervalTooLongFrames
The number of received (PHY to MAC) frames that exceed the maximum
permitted frame size in a particular interval in the
past 24 hours
HC-PerfHist-TC-MIBHCPerfIntervalCount .1.0.8802.17.1.1.1.5.2.1.7
rprSpanErrorIntervalTooShortFrames
The number of received (PHY to MAC) frames shortest than the
minimum permitted frame size in a particular interval
in the past 24 hours.
HC-PerfHist-TC-MIBHCPerfIntervalCount .1.0.8802.17.1.1.1.5.2.1.8
rprSpanErrorIntervalBadHecFrames
The number of received (PHY to MAC) frames with HEC error in a
particular interval in the past 24 hours
HC-PerfHist-TC-MIBHCPerfIntervalCount .1.0.8802.17.1.1.1.5.2.1.9
rprSpanErrorIntervalBadFcsFrames
The number of received (PHY to MAC) data and control frames
where the fcs value did not match the expected fcs value.

This includes data frames passed to the client as a result of
rprIfMacOperModes being …
HC-PerfHist-TC-MIBHCPerfIntervalCount .1.0.8802.17.1.1.1.5.2.1.10
rprSpanErrorIntervalSelfSrcUcastFrames
The number of received (PHY to MAC) unicast frames that were transmitted
by the station itself i.e. the source MAC is equal to the
interface MAC, in a particular interval in the past 24 hours
HC-PerfHist-TC-MIBHCPerfIntervalCount .1.0.8802.17.1.1.1.5.2.1.11
rprSpanErrorIntervalPmdAbortFrames
The number of received (PHY to MAC) unicast frames that were aborted
by the PMD layer, in a particular interval in the past
24 hours
HC-PerfHist-TC-MIBHCPerfIntervalCount .1.0.8802.17.1.1.1.5.2.1.12
rprSpanErrorIntervalBadAddrFrames
The number of received (PHY to MAC) frames
with invalid SA value.
HC-PerfHist-TC-MIBHCPerfIntervalCount .1.0.8802.17.1.1.1.5.2.1.13
rprSpanErrorIntervalBadParityFrames
The number of received (PHY to MAC) frames
parity value not matching the expected parity value
HC-PerfHist-TC-MIBHCPerfIntervalCount .1.0.8802.17.1.1.1.5.2.1.14
rprSpanErrorIntervalContainedFrames
The number of received (PHY to MAC) frames
that were removed due to context containment
HC-PerfHist-TC-MIBHCPerfIntervalCount .1.0.8802.17.1.1.1.5.2.1.15
rprSpanErrorIntervalScffErrors
The number of received (PHY to MAC) errored SCFF,
with bad parity, bad FCS, or both.
HC-PerfHist-TC-MIBHCPerfIntervalCount .1.0.8802.17.1.1.1.5.2.1.16
rprSpanErrorIntervalErroredSeconds
The number of errored seconds.
HC-PerfHist-TC-MIBHCPerfIntervalCount .1.0.8802.17.1.1.1.5.2.1.17
rprSpanErrorIntervalSeverelyErroredSeconds
The number of severely errored seconds.
HC-PerfHist-TC-MIBHCPerfIntervalCount .1.0.8802.17.1.1.1.5.2.1.18
rprSpanErrorIntervalUnavailableSeconds
The number of unavailable seconds.
HC-PerfHist-TC-MIBHCPerfIntervalCount .1.0.8802.17.1.1.1.5.2.1.19

rprSpanErrorCountersDayTable

table
.1.0.8802.17.1.1.1.5.3 · 1 row entry · 16 columns
Open in standard view
Uses the rfc variant from /opt/observium/mibs/rfc.
Command help
Walk rprSpanErrorCountersDayTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IEEE-802DOT17-RPR-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IEEE-802DOT17-RPR-MIB::rprSpanErrorCountersDayTable' 
The RPR Mac Error Day Table contains the cumulative sum
of the various statistics for the 24 hour period
preceding the current interval.
          
  All attributes in this table are volatile,
  i.e. will be cleared on system reset.
rprSpanErrorCountersDayEntry row .1.0.8802.17.1.1.1.5.3.1
An entry in the RPR Error Day table.
Indexes
Column Syntax OID
rprSpanErrorDayIfIndex
The ifIndex of this RPR interface.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.0.8802.17.1.1.1.5.3.1.1
rprSpanErrorDaySpan
An indication of the span of the interface for which this
row contains information.
RprSpan
Type Values:
1east
2west
 .1.0.8802.17.1.1.1.5.3.1.2
rprSpanErrorDayTtlExpFrames
The number of received (PHY to MAC) frames that were dropped
due to zero Time To Live (TTL).
HC-PerfHist-TC-MIBHCPerfTotalCount .1.0.8802.17.1.1.1.5.3.1.3
rprSpanErrorDayTooLongFrames
The number of received (PHY to MAC) frames that exceed the
maximum permitted frame size.
HC-PerfHist-TC-MIBHCPerfTotalCount .1.0.8802.17.1.1.1.5.3.1.4
rprSpanErrorDayTooShortFrames
The number of received (PHY to MAC) frames shortest than the
minimum permitted frame size.
HC-PerfHist-TC-MIBHCPerfTotalCount .1.0.8802.17.1.1.1.5.3.1.5
rprSpanErrorDayBadHecFrames
The number of received (PHY to MAC) frames with HEC error.
HC-PerfHist-TC-MIBHCPerfTotalCount .1.0.8802.17.1.1.1.5.3.1.6
rprSpanErrorDayBadFcsFrames
The number of received (PHY to MAC) data and control frames
where the fcs value did not match the expected fcs value.

This includes data frames passed to the client as a result of
rprIfMacOperModes being …
HC-PerfHist-TC-MIBHCPerfTotalCount .1.0.8802.17.1.1.1.5.3.1.7
rprSpanErrorDaySelfSrcUcastFrames
The number of received (PHY to MAC) unicast frames that were
transmitted by the station itself i.e.
the source MAC is equal to the interface MAC.
HC-PerfHist-TC-MIBHCPerfTotalCount .1.0.8802.17.1.1.1.5.3.1.8
rprSpanErrorDayPmdAbortFrames
The number of received (PHY to MAC) frames that were
aborted by the PMD
HC-PerfHist-TC-MIBHCPerfTotalCount .1.0.8802.17.1.1.1.5.3.1.9
rprSpanErrorDayBadAddrFrames
The number of received (PHY to MAC) frames
with invalid SA value.
HC-PerfHist-TC-MIBHCPerfTotalCount .1.0.8802.17.1.1.1.5.3.1.10
rprSpanErrorDayBadParityFrames
The number of received (PHY to MAC) frames
parity value not matching the expected parity value
HC-PerfHist-TC-MIBHCPerfTotalCount .1.0.8802.17.1.1.1.5.3.1.11
rprSpanErrorDayContainedFrames
The number of received (PHY to MAC) frames
that were removed due to context containment
HC-PerfHist-TC-MIBHCPerfTotalCount .1.0.8802.17.1.1.1.5.3.1.12
rprSpanErrorDayScffErrors
The number of received (PHY to MAC) errored SCFF,
with bad parity, bad FCS, or both.
HC-PerfHist-TC-MIBHCPerfTotalCount .1.0.8802.17.1.1.1.5.3.1.13
rprSpanErrorDayErroredSeconds
The number of errored seconds.
HC-PerfHist-TC-MIBHCPerfTotalCount .1.0.8802.17.1.1.1.5.3.1.14
rprSpanErrorDaySeverelyErroredSeconds
The number of severely errored seconds.
HC-PerfHist-TC-MIBHCPerfTotalCount .1.0.8802.17.1.1.1.5.3.1.15
rprSpanErrorDayUnavailableSeconds
The number of unavailable seconds.
HC-PerfHist-TC-MIBHCPerfTotalCount .1.0.8802.17.1.1.1.5.3.1.16

rprSpanErrorCountersStatsTable

table
.1.0.8802.17.1.1.1.5.4 · 1 row entry · 13 columns
Open in standard view
Uses the rfc variant from /opt/observium/mibs/rfc.
Command help
Walk rprSpanErrorCountersStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IEEE-802DOT17-RPR-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IEEE-802DOT17-RPR-MIB::rprSpanErrorCountersStatsTable' 
The RPR Errors total counters table.
          
The DiscontinuityTime for this table is indicated by 
ifCounterDiscontinuityTime defined in ifXTable.
          
All attributes in this table are volatile,
i.e. will be cleared on system reset.
rprSpanErrorCountersStatsEntry row .1.0.8802.17.1.1.1.5.4.1
An entry in the span error counter table.
Indexes
Column Syntax OID
rprSpanErrorStatsIfIndex
The ifIndex of this RPR interface.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.0.8802.17.1.1.1.5.4.1.1
rprSpanErrorStatsSpan
An indication of the span of the interface for which this
row contains information.
RprSpan
Type Values:
1east
2west
 .1.0.8802.17.1.1.1.5.4.1.2
rprSpanErrorStatsTtlExpFrames
The number of received (PHY to MAC) frames that were dropped
due to zero Time To Live (TTL).
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.0.8802.17.1.1.1.5.4.1.3
rprSpanErrorStatsTooLongFrames
The number of received (PHY to MAC) frames that exceed the
maximum permitted frame size.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.0.8802.17.1.1.1.5.4.1.4
rprSpanErrorStatsTooShortFrames
The number of received (PHY to MAC) frames shortest than the
minimum permitted frame size.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.0.8802.17.1.1.1.5.4.1.5
rprSpanErrorStatsBadHecFrames
The number of received (PHY to MAC) frames with HEC error.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.0.8802.17.1.1.1.5.4.1.6
rprSpanErrorStatsBadFcsFrames
The number of received (PHY to MAC) data and control frames
where the fcs value did not match the expected fcs value.

This includes data frames passed to the client as a result of
rprIfMacOperModes being …
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.0.8802.17.1.1.1.5.4.1.7
rprSpanErrorStatsSelfSrcUcastFrames
The number of received (PHY to MAC) unicast frames that were
transmitted by the station itself i.e.
the source MAC is equal to the interface MAC.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.0.8802.17.1.1.1.5.4.1.8
rprSpanErrorStatsPmdAbortFrames
The number of received (PHY to MAC) frames that
were aborted by the PMD
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.0.8802.17.1.1.1.5.4.1.9
rprSpanErrorStatsBadAddrFrames
The number of received (PHY to MAC) frames
with invalid SA value.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.0.8802.17.1.1.1.5.4.1.10
rprSpanErrorStatsBadParityFrames
The number of received (PHY to MAC) frames
parity value not matching the expected parity value
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.0.8802.17.1.1.1.5.4.1.11
rprSpanErrorStatsContainedFrames
The number of received (PHY to MAC) frames
that were removed due to context containment
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.0.8802.17.1.1.1.5.4.1.12
rprSpanErrorStatsScffErrors
The number of received (PHY to MAC) errored SCFF,
with bad parity, bad FCS, or both.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.0.8802.17.1.1.1.5.4.1.13