HUAWEI-WLAN-CONFIGURATION-MIB Table View

Description.

hwWlanCommitEntry row .1.3.6.1.4.1.2011.6.139.11.1.1.14.1

Description.

Indexes

hwWlanCommitApMac

Column	Syntax	OID
hwWlanCommitApMac Description.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2011.6.139.11.1.1.14.1.1
hwWlanConfigCommit Description.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.6.139.11.1.1.14.1.2

Description.

hwWlanBLEMonitorListEntry row .1.3.6.1.4.1.2011.6.139.11.1.1.17.1

Description.

Indexes

hwWlanBLEMonitoringListMac

Column	Syntax	OID
hwWlanBLEMonitoringListMac Description.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2011.6.139.11.1.1.17.1.1
hwWlanBLEMonitoringListRowStatue Description.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.6.139.11.1.1.17.1.2

Description.

hwWlanManualContainListEntry row .1.3.6.1.4.1.2011.6.139.11.1.1.28.1

Description.

Indexes

hwWlanManualContainListMac

Column	Syntax	OID
hwWlanManualContainListMac Description.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2011.6.139.11.1.1.28.1.1
hwWlanManualContainListRowStatus Description.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.6.139.11.1.1.28.1.2

Description.

hwWlanNeighborRelationEntry row .1.3.6.1.4.1.2011.6.139.11.1.1.31.1.1

Description.

Indexes

hwWlanNeighborRelationApName hwWlanNeighborRelationNeighborApName

Column	Syntax	OID
hwWlanNeighborRelationApName This object indicates the AP name.	OctetString Constraints: range: 1-63	.1.3.6.1.4.1.2011.6.139.11.1.1.31.1.1.1
hwWlanNeighborRelationNeighborApName This object indicates the neighbor AP name.	OctetString Constraints: range: 1-63	.1.3.6.1.4.1.2011.6.139.11.1.1.31.1.1.2
hwWlanNeighborRelationNeighborRowStatus This object indicates the row status of this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.6.139.11.1.1.31.1.1.3

Description.

hwWlanIotOperateEntry row .1.3.6.1.4.1.2011.6.139.11.1.1.32.1

Description.

Indexes

hwWlanIotOperateCardId hwWlanIDIndexedAPSpApId

Column	Syntax	OID
hwWlanIotOperateCardId This object indicates the AP card ID.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.6.139.11.1.1.32.1.1
hwWlanIotOperateType This object indicates the operation type to the IOT card of the AP.	Enumerationr/w Enumerated Values: 1 reboot 2 resetfactoryconfiguration 3 switchfirmware 4 resetnetworkconfiguration	.1.3.6.1.4.1.2011.6.139.11.1.1.32.1.2

This table is used to add and delete AP MAC addresses in the white lists.

hwWlanApMacWhitelistEntry row .1.3.6.1.4.1.2011.6.139.11.1.2.2.1

The index of this table is hwWlanApMacWhitelistMacAddr.

Indexes

hwWlanApMacWhitelistMacAddr

Column	Syntax	OID
hwWlanApMacWhitelistMacAddr This object indicates the MAC address of an AP.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2011.6.139.11.1.2.2.1.1
hwWlanApMacWhitelistRowStatus This object indicates the row status of this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.6.139.11.1.2.2.1.2

This table is used to add and delete AP sequence numbers in the white lists of AP sequence numbers.

hwWlanApSnWhitelistEntry row .1.3.6.1.4.1.2011.6.139.11.1.2.3.1

The index of this table is hwWlanApSnWhitelistSn.

Indexes

hwWlanApSnWhitelistSn

Column	Syntax	OID
hwWlanApSnWhitelistSn Description.	OctetString	.1.3.6.1.4.1.2011.6.139.11.1.2.3.1.1
hwWlanApSnWhitelistRowStatus Indicate the row status of this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.6.139.11.1.2.3.1.2

This table describes the AP MAC blacklist.This table is used to add an AP's MAC address to the blacklist or delete an AP's MAC address from the blacklist.

hwWlanApMacBlacklistEntry row .1.3.6.1.4.1.2011.6.139.11.1.2.4.1

The index of this table is hwWlanApMacBlacklistMacAddr.

Indexes

hwWlanApMacBlacklistMacAddr

Column	Syntax	OID
hwWlanApMacBlacklistMacAddr This object indicates the MAC address of an AP.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2011.6.139.11.1.2.4.1.1
hwWlanApMacBlacklistRowStatus This object indicates the row status of this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.6.139.11.1.2.4.1.2

This table is used to create or delete AP groups and bind or unbind the AP system profile, 2G radio profile, and domain profile.

hwAPGroupEntry row .1.3.6.1.4.1.2011.6.139.11.1.3.1

The index of this table is hwAPGroupName.

Indexes

hwAPGroupName

Column	Syntax	OID
hwAPGroupName This object indicates the AP group name. It is the index of the table.	OctetString Constraints: range: 1-35	.1.3.6.1.4.1.2011.6.139.11.1.3.1.1
hwAPGrpAPSystemProfile This object indicates the system profile to which AP groups are bound. The default value is default.	OctetStringr/w Constraints: range: 1-35	.1.3.6.1.4.1.2011.6.139.11.1.3.1.2
hwAPGrpDomainProfile This object indicates the domain profile to which AP groups are bound. The default value is default.	OctetStringr/w Constraints: range: 1-35	.1.3.6.1.4.1.2011.6.139.11.1.3.1.4
hwAPGrpRowStatus This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used ? ROWSTATUS_UNDEFINED: undefined ROWSTATUS_ACTIVE: active ROWSTATUS_NOTINSERVICE: notInService ? ROWST…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.6.139.11.1.3.1.5
hwAPGrpWidsProfile This object indicates the bound WIDS profile.	OctetStringr/w Constraints: range: 0-35	.1.3.6.1.4.1.2011.6.139.11.1.3.1.6
hwAPGrpBleProfile This object indicates the bound BLE profile.	OctetStringr/w Constraints: range: 0-35	.1.3.6.1.4.1.2011.6.139.11.1.3.1.7
hwAPGrpUUIDString This object indicates the UUID String value of Group.	OctetStringr/w Constraints: range: 0-16	.1.3.6.1.4.1.2011.6.139.11.1.3.1.8
hwAPGrpUUIDHex This object indicates the UUID Hex value of Group.	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.2011.6.139.11.1.3.1.9
hwAPGrpSiteCode This object indicates the site code of Group.	OctetStringr/w Constraints: range: 0-14	.1.3.6.1.4.1.2011.6.139.11.1.3.1.10
hwAPGrpDomainName This object indicates the domain name of Group.	OctetStringr/w Constraints: range: 0-255	.1.3.6.1.4.1.2011.6.139.11.1.3.1.11
hwAPGrpLocation This object indicates the ap location of Group.	OctetStringr/w Constraints: range: 0-63	.1.3.6.1.4.1.2011.6.139.11.1.3.1.12
hwAPGrpApNum This object indicates the ap numbers of Group.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.6.139.11.1.3.1.13
hwAPGrpHighwayProfileName This object indicates the UUID String value of Group.	OctetStringr/w Constraints: range: 0-35	.1.3.6.1.4.1.2011.6.139.11.1.3.1.14
hwAPGrpAPIPVersion This object indicates the IP Version of AP.	Enumerationr/w Enumerated Values: 1 all 2 ipv4 3 ipv6	.1.3.6.1.4.1.2011.6.139.11.1.3.1.15
hwAPGrpScene This object indicates the scene of group.	OctetStringr/w Constraints: range: 0-35	.1.3.6.1.4.1.2011.6.139.11.1.3.1.16

This table is the AP wired port profile table.This table is used to bind a wired port profile to an AP group or unbind a wired port profile from an AP group.

hwAPGroupWiredPortEntry row .1.3.6.1.4.1.2011.6.139.11.1.4.1

Indexes of this table are hwAPGroupName, hwAPGrpWPInterfaceType, and hwAPGrpWPInterfaceNum.

Indexes

hwAPGroupName hwAPGrpWPInterfaceType hwAPGrpWPInterfaceNum

Column	Syntax	OID
hwAPGrpWPInterfaceType This object indicates the interface type. It is the index of the table.	Enumeration Enumerated Values: 1 fe 2 ge 3 trunk 4 multige 5 xge	.1.3.6.1.4.1.2011.6.139.11.1.4.1.1
hwAPGrpWPInterfaceNum This object indicates the interface index.	Unsigned32 Constraints: range: 0-27	.1.3.6.1.4.1.2011.6.139.11.1.4.1.2
hwAPGrpWPProfile This object indicates the bound wired port profile.	OctetStringr/w Constraints: range: 1-35	.1.3.6.1.4.1.2011.6.139.11.1.4.1.3
hwAPGrpWPRowStatus This object indicates the row status of this table. ROWSTATUS_CREATEAN.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.6.139.11.1.4.1.4

This table is used to bind a 5G radio profile, Mesh profile, WDS profile, WIDS profile, location profile, or spectrum profile to an AP group or unbind a 5G radio profile, Mesh profile, WDS profile, WIDS profile, location profile, or spectrum profile from an AP group..

hwAPGroupRadioEntry row .1.3.6.1.4.1.2011.6.139.11.1.5.1

Indexes of this table are hwAPGroupName and hwAPGrpRadioId.

Indexes

hwAPGrpRadioId hwAPGroupName

Column	Syntax	OID
hwAPGrpRadioId This object indicates the radio ID. It is the index of the table.	Unsigned32 Constraints: range: 0-2	.1.3.6.1.4.1.2011.6.139.11.1.5.1.1
hwAPGrpRadio5gProfile This object indicates the bound 5G radio profile.	OctetStringr/w Constraints: range: 1-35	.1.3.6.1.4.1.2011.6.139.11.1.5.1.2
hwAPGrpMeshProfile This object indicates the bound Mesh profile.	OctetStringr/w Constraints: range: 0-35	.1.3.6.1.4.1.2011.6.139.11.1.5.1.3
hwAPGrpWdsProfile This object indicates the bound WDS profile.	OctetStringr/w Constraints: range: 0-35	.1.3.6.1.4.1.2011.6.139.11.1.5.1.4
hwAPGrpLocationProfile This object indicates the bound location profile.	OctetStringr/w Constraints: range: 0-35	.1.3.6.1.4.1.2011.6.139.11.1.5.1.6
hwAPGrpRadioRowStatus This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used ? ROWSTATUS_UNDEFINED: undefined ? ROWSTATUS_ACTIVE: active ? ROWSTATUS_NOTINSERVICE: notInService ? RO…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.6.139.11.1.5.1.8
hwAPGrpRadio2gProfile This object indicates the 2G radio profile to which AP groups are bound. The default value is default.	OctetStringr/w Constraints: range: 1-35	.1.3.6.1.4.1.2011.6.139.11.1.5.1.9
hwAPGrpMeshWhitelistProfile This object indicates the bound whitelist profile.	OctetStringr/w Constraints: range: 0-35	.1.3.6.1.4.1.2011.6.139.11.1.5.1.10
hwAPGrpWdsWhitelistProfile This object indicates the bound whitelist profile.	OctetStringr/w Constraints: range: 0-35	.1.3.6.1.4.1.2011.6.139.11.1.5.1.11
hwAPGrpRadioSwitch This object indicates the name of a 2G radio profile. It is the index of the table.	Enumerationr/w Enumerated Values: 1 disable 2 enable	.1.3.6.1.4.1.2011.6.139.11.1.5.1.12
hwAPGrpRadioChannel This object indicates a radio-frequency channel. For 2.4G, the value ranges from 1 to 13. For 5G, the value ranges from 36 to 196 (with a separation interval of 4).	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.6.139.11.1.5.1.13
hwAPGrpRadioBandwidth This object indicate a bandwidth. The default value is 1.	Enumerationr/w Enumerated Values: 1 ht20 2 ht40Plus 3 ht40Minus 4 ht80 5 ht160 255 invalid	.1.3.6.1.4.1.2011.6.139.11.1.5.1.14
hwAPGrpRadioEirp This object indicates a power value. The default value is 127. The configuration is saved but the actual power is determined by the maximum power supported by the AP.	Unsigned32r/w Constraints: range: 1-127	.1.3.6.1.4.1.2011.6.139.11.1.5.1.15
hwAPGrpRadioAntennaGain This object indicates antenna gains. The default value 0xFF indicates that the default gain of an AP is used. It is expressed in dB. Default gains vary with different types of APs.	Integer32r/w Constraints: range: -10-30 range: 255-255	.1.3.6.1.4.1.2011.6.139.11.1.5.1.16
hwAPGrpRadioCoverageDistance This object indicates a radio coverage distance. The default value is 3. The unit is 0.1 km.	Unsigned32r/w Constraints: range: 1-400	.1.3.6.1.4.1.2011.6.139.11.1.5.1.17
hwAPGrpRadioWorkMode This object indicates the radio working mode. The default value is 1.	Enumerationr/w Enumerated Values: 1 normal 2 monitor 3 dualband 4 proxyScan	.1.3.6.1.4.1.2011.6.139.11.1.5.1.18
hwAPGrpRadioFrequency This object indicates the setting of the frequency band for radio 0. The default value is 1. 1: frequency2G, 2: frequency5G, 3: frequency6G.	Enumerationr/w Enumerated Values: 1 frequency2G 2 frequency5G 3 frequency6G	.1.3.6.1.4.1.2011.6.139.11.1.5.1.19
hwAPGrpSpectrumAnalysisSwitch This object indicates the status of the spectrum analysis function. The default value is 1.	Enumerationr/w Enumerated Values: 1 disable 2 enable	.1.3.6.1.4.1.2011.6.139.11.1.5.1.20
hwAPGrpWidsDeviceDetectSwitch This object indicates the status of the device detection function. The default value is 1.	Enumerationr/w Enumerated Values: 1 disable 2 enable	.1.3.6.1.4.1.2011.6.139.11.1.5.1.21
hwAPGrpWidsAttackDetectEnBmp This object indicates the bit map of the brute force attack switch. bit0:weak-iv, bit1:spoof, bit2:flood, bit3:wpa-psk, bit4:wpa2-psk, bit5:wapi-psk, bit6:wep-psk.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.6.139.11.1.5.1.22
hwAPGrpWidsRogueContainSwitch This object indicates the status of the device detection function. The default value is 1.	Enumerationr/w Enumerated Values: 1 disable 2 enable	.1.3.6.1.4.1.2011.6.139.11.1.5.1.23
hwAPGrpRadioSecondChannel This object indicates a radio-frequency channel. The value ranges from 42,58,106,122,138,155.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.6.139.11.1.5.1.24
hwAPGrpAutoChannelSelectSwitch This object indicates the status of the automatic channel selection function. The default value is 2.	Enumerationr/w Enumerated Values: 1 disable 2 enable	.1.3.6.1.4.1.2011.6.139.11.1.5.1.25
hwAPGrpAutoTxPowerSelectSwitch This object indicates the status of the automatic power selection function. The default value is 2.	Enumerationr/w Enumerated Values: 1 disable 2 enable	.1.3.6.1.4.1.2011.6.139.11.1.5.1.26
hwAPGrpSfnRoamCtsSwitch Description.	Enumerationr/w Enumerated Values: 1 disable 2 enable	.1.3.6.1.4.1.2011.6.139.11.1.5.1.27
hwAPGrpSfnRoamBeaconSwitch Description.	Enumerationr/w Enumerated Values: 1 disable 2 enable	.1.3.6.1.4.1.2011.6.139.11.1.5.1.28
hwAPGrpSfnRoamCtsDelay Description.	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.2011.6.139.11.1.5.1.29
hwAPGroupRadioCalibrateFlexibleRadio Description.	Enumerationr/w Enumerated Values: 1 disable 2 enable	.1.3.6.1.4.1.2011.6.139.11.1.5.1.30
hwAPGrpAutoBandwidthSelectSwitch This object indicates the status of the automatic bandwidth selection function. The default value is 1.	Enumerationr/w Enumerated Values: 1 disable 2 enable	.1.3.6.1.4.1.2011.6.139.11.1.5.1.31
hwAPGrpReferenceDataAnalysis This object indicates the status of the referencing data-analysis function. The default value is 2.	Enumerationr/w Enumerated Values: 1 disable 2 enable	.1.3.6.1.4.1.2011.6.139.11.1.5.1.32
hwAPGrpChannelMonitorSwitch This object indicates the status of the channel monitor function. The default value is 1.	Enumerationr/w Enumerated Values: 1 disable 2 enable	.1.3.6.1.4.1.2011.6.139.11.1.5.1.33
hwAPGrpReference3dData This object indicates the status of the referencing 3d-data function. The default value is 2.	Enumerationr/w Enumerated Values: 1 disable 2 enable	.1.3.6.1.4.1.2011.6.139.11.1.5.1.34

This table is used to create VAPs in an AP group.

hwAPGroupVapEntry row .1.3.6.1.4.1.2011.6.139.11.1.6.1

Indexes of this table are hwAPGroupName, hwAPGrpRadioId, and hwAPGrpWlanId.

Indexes

hwAPGroupName hwAPGrpRadioId hwAPGrpWlanId

Column	Syntax	OID
hwAPGrpWlanId This object indicates the WLAN ID. It is the index of the table.	Unsigned32 Constraints: range: 1-16	.1.3.6.1.4.1.2011.6.139.11.1.6.1.1
hwAPGrpVapProfile This object indicates the bound VAP profile.	OctetStringr/w Constraints: range: 1-35	.1.3.6.1.4.1.2011.6.139.11.1.6.1.2
hwAPGrpVapRowStatus This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.6.139.11.1.6.1.3
hwAPGrpVapServiceVlan This object indicates the service VLAN for the VAP. The invalid value is 0.	Unsigned32r/w Constraints: range: 0-4094	.1.3.6.1.4.1.2011.6.139.11.1.6.1.4
hwAPGrpVapVlanPool This object indicates the VLAN pool to which the VAP is bound.	OctetStringr/w Constraints: range: 0-31	.1.3.6.1.4.1.2011.6.139.11.1.6.1.5

This table is used to create or delete an AP specific profile and bind an AP system profile, 2G radio profile, or domain profile to it or unbind an AP system profile, 2G radio profile, or domain profile from it.

hwAPSpecificEntry row .1.3.6.1.4.1.2011.6.139.11.1.7.1

The index of this table is hwAPSpApMac.

Indexes

hwAPSpApMac

Column	Syntax	OID
hwAPSpAPSystemProfile This object indicates the system profile bound to the AP specific profile.	OctetStringr/w Constraints: range: 0-35	.1.3.6.1.4.1.2011.6.139.11.1.7.1.2
hwAPSpDomainProfile This object indicates the domain profile bound to the AP specific profile.	OctetStringr/w Constraints: range: 0-35	.1.3.6.1.4.1.2011.6.139.11.1.7.1.4
hwAPSpRowStatus This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used? ROWSTATUS_UNDEFINED: undefined ? ROWSTATUS_ACTIVE: active ? ROWSTATUS_NOTINSERVICE: notInService ? ROW…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.6.139.11.1.7.1.5
hwAPSpApMac This object indicates the MAC address of an AP.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2011.6.139.11.1.7.1.6
hwAPSpApId This object indicates the AP ID.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.6.139.11.1.7.1.7
hwAPSpApTypeInfo This object indicates the domain profile bound to the AP specific profile.	OctetStringr/w Constraints: range: 0-35	.1.3.6.1.4.1.2011.6.139.11.1.7.1.8
hwAPSpWidsProfile This object indicates the bound WIDS profile.	OctetStringr/w Constraints: range: 0-35	.1.3.6.1.4.1.2011.6.139.11.1.7.1.9
hwAPSpBleProfile This object indicates the bound BLE profile.	OctetStringr/w Constraints: range: 0-35	.1.3.6.1.4.1.2011.6.139.11.1.7.1.10
hwAPSpLongitude This object indicates the longitude.	OctetStringr/w Constraints: range: 0-15	.1.3.6.1.4.1.2011.6.139.11.1.7.1.11
hwAPSpLatitude This object indicates the latitude.	OctetStringr/w Constraints: range: 0-14	.1.3.6.1.4.1.2011.6.139.11.1.7.1.12
hwAPSpApAddressMode This object indicates the IP address allocation mode.	Enumerationr/w Enumerated Values: -1 invalid 1 static 2 dhcp 3 slaac	.1.3.6.1.4.1.2011.6.139.11.1.7.1.13
hwAPSpApIPv4Address This object indicates the AP's IPv4 address. hwAPSpApIPv4Address takes effect if hwAPSpApAddressMode is set to static.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2011.6.139.11.1.7.1.14
hwAPSpApIPv4Mask This object indicates the AP's IPv4 mask. hwAPSpApIPv4Mask takes effect if hwAPSpApAddressMode is set to static.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2011.6.139.11.1.7.1.15
hwAPSpApIPv4Gateway This object indicates the AP's IPv4 gateway. hwAPSpApIPv4Gateway takes effect if hwAPSpApAddressMode is set to static.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2011.6.139.11.1.7.1.16
hwAPSpApIPv6Address This object indicates the AP's IPv6 address. hwAPSpApIPv6Address takes effect if hwAPSpApAddressMode is set to static.	OctetStringr/w Constraints: range: 0-46	.1.3.6.1.4.1.2011.6.139.11.1.7.1.17
hwAPSpApIPv6PrefixLen This object indicates the length of the IPv6 address prefix.	Integer32r/w Constraints: range: 0-128	.1.3.6.1.4.1.2011.6.139.11.1.7.1.18
hwAPSpApIPv6Gateway This object indicates the AP's IPv6 gateway. hwAPSpApIPv6Gateway takes effect if hwAPSpApAddressMode is set to static.	OctetStringr/w Constraints: range: 0-46	.1.3.6.1.4.1.2011.6.139.11.1.7.1.19
hwAPSpIPv4ACList This object indicates the AC IPv4 address list. NOTE AC lists are separated by question marks (?).A maximum of four AC lists can be configured.	OctetStringr/w	.1.3.6.1.4.1.2011.6.139.11.1.7.1.20
hwAPSpIPv6ACList This object indicates the AC IPv6 address list. NOTE AC lists are separated by question marks (?).A maximum of four AC lists can be configured.	OctetStringr/w	.1.3.6.1.4.1.2011.6.139.11.1.7.1.21
hwAPSpGroupName Description.	OctetStringr/w Constraints: range: 0-35	.1.3.6.1.4.1.2011.6.139.11.1.7.1.22
hwAPSpApName Description.	OctetStringr/w Constraints: range: 0-31	.1.3.6.1.4.1.2011.6.139.11.1.7.1.23
hwAPSpBranchGroupName This object indicates the AP branch group name.	OctetStringr/w Constraints: range: 0-35	.1.3.6.1.4.1.2011.6.139.11.1.7.1.24
hwAPSpLocation This object indicates the ap location.	OctetStringr/w Constraints: range: 0-63	.1.3.6.1.4.1.2011.6.139.11.1.7.1.25
hwAPSpSiteCode This object indicates the site code.	OctetStringr/w Constraints: range: 0-14	.1.3.6.1.4.1.2011.6.139.11.1.7.1.26
hwAPSpDomainName This object indicates the domain name.	OctetStringr/w Constraints: range: 0-255	.1.3.6.1.4.1.2011.6.139.11.1.7.1.27
hwAPSpApZoneName This object indicates the AP zone name.	OctetStringr/w Constraints: range: 0-35	.1.3.6.1.4.1.2011.6.139.11.1.7.1.28

This table is used to bind an AP wired port profile to an AP specific profile or unbind an AP wired port profile from an AP specific profile..

hwAPSpecificWiredPortEntry row .1.3.6.1.4.1.2011.6.139.11.1.8.1

Indexes of this table are hwAPSpWPInterfaceType, hwAPSpWPInterfaceNum and hwAPSpApMac.

Indexes

hwAPSpWPInterfaceType hwAPSpWPInterfaceNum hwAPSpApMac

Column	Syntax	OID
hwAPSpWPInterfaceType This object indicates the interface type.	Enumeration Enumerated Values: 1 fe 2 ge 3 trunk 4 multige 5 xge	.1.3.6.1.4.1.2011.6.139.11.1.8.1.1
hwAPSpWPInterfaceNum This object indicates the interface index.	Unsigned32 Constraints: range: 0-27	.1.3.6.1.4.1.2011.6.139.11.1.8.1.2
hwAPSpWPProfile This object indicates the bound wired port profile.	OctetStringr/w Constraints: range: 0-35	.1.3.6.1.4.1.2011.6.139.11.1.8.1.3
hwAPSpWPRowStatus This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used? ROWSTATUS_UNDEFINED: undefined ? ROWSTATUS_ACTIVE: active ? ROWSTATUS_NOTINSERVICE: notInService ? ROW…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.6.139.11.1.8.1.4
hwAPSpWPApId This object indicates the AP ID.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.6.139.11.1.8.1.5

This table records the information about profiles bound based on radio in an AP specific profile, including 5G radio profile, Mesh profile, WDS profile, WIDS profile, location profile, and spectrum profile.

hwAPSpecificRadioEntry row .1.3.6.1.4.1.2011.6.139.11.1.9.1

Indexes of this table are hwAPSpecificName and hwAPSpRadio.

Indexes

hwAPSpRadio hwAPSpApMac

Column	Syntax	OID
hwAPSpRadio This object indicates the radio ID. It is the index of the table.	Unsigned32 Constraints: range: 0-2	.1.3.6.1.4.1.2011.6.139.11.1.9.1.1
hwAPSp5gRadioProfile This object indicates the bound 5G radio profile.	OctetStringr/w Constraints: range: 0-35	.1.3.6.1.4.1.2011.6.139.11.1.9.1.2
hwAPSpMeshProfile This object indicates the bound Mesh profile.	OctetStringr/w Constraints: range: 0-35	.1.3.6.1.4.1.2011.6.139.11.1.9.1.3
hwAPSpWdsProfile This object indicates the bound WDS profile.	OctetStringr/w Constraints: range: 0-35	.1.3.6.1.4.1.2011.6.139.11.1.9.1.4
hwAPSpLocationProfile This object indicates the bound location profile.	OctetStringr/w Constraints: range: 0-35	.1.3.6.1.4.1.2011.6.139.11.1.9.1.6
hwAPSpRadioRowStatus This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.6.139.11.1.9.1.8
hwAPSpRadio2gProfile This object indicates the bound 2G radio profile.	OctetStringr/w Constraints: range: 0-35	.1.3.6.1.4.1.2011.6.139.11.1.9.1.9
hwAPSpMeshWhitelistProfile This object indicates the bound whitelist profile.	OctetStringr/w Constraints: range: 0-35	.1.3.6.1.4.1.2011.6.139.11.1.9.1.10
hwAPSpWdsWhitelistProfile This object indicates the bound whitelist profile.	OctetStringr/w Constraints: range: 0-35	.1.3.6.1.4.1.2011.6.139.11.1.9.1.11
hwAPSpRadioSwitch This object indicates the switch of radio. The default value is 255.	Enumerationr/w Enumerated Values: 1 disable 255 invalid	.1.3.6.1.4.1.2011.6.139.11.1.9.1.12
hwAPSpRadioChannel This object indicates a radio-frequency channel. For 2.4G, the value ranges from 1 to 13. For 5G, the value ranges from 36 to 196 (with a separation interval of 4).	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.6.139.11.1.9.1.13
hwAPSpRadioBandwidth This object indicate a bandwidth. The default value is 255.	Enumerationr/w Enumerated Values: 1 ht20 2 ht40Plus 3 ht40Minus 4 ht80 5 ht160 255 invalid	.1.3.6.1.4.1.2011.6.139.11.1.9.1.14
hwAPSpRadioEirp This object indicates a power value. The default value is 255. The configuration is saved but the actual power is determined by the maximum power supported by the AP.	Unsigned32r/w Constraints: range: 1-127 range: 255-255	.1.3.6.1.4.1.2011.6.139.11.1.9.1.15
hwAPSpRadioAntennaGain This object indicates antenna gains. The default value 0xFF indicates that the default gain of an AP is used. It is expressed in dB. Default gains vary with different types of APs.	Integer32r/w Constraints: range: -10-30 range: 255-255	.1.3.6.1.4.1.2011.6.139.11.1.9.1.16
hwAPSpRadioCoverageDistance This object indicates a radio coverage distance. The default value is 65535. The unit is 0.1 km.	Unsigned32r/w Constraints: range: 1-400 range: 65535-65535	.1.3.6.1.4.1.2011.6.139.11.1.9.1.17
hwAPSpRadioWorkMode This object indicates the radio working mode. The default value is 255.	Enumerationr/w Enumerated Values: 1 normal 2 monitor 3 dualband 4 proxyScan 255 invalid	.1.3.6.1.4.1.2011.6.139.11.1.9.1.18
hwAPSpRadioFrequency This object indicates the setting of the frequency band for radio 0. The default value is invalid. 1: frequency2G, 2: frequency5G, 3: frequency6G.	Enumerationr/w Enumerated Values: 1 frequency2G 2 frequency5G 3 frequency6G 255 invalid	.1.3.6.1.4.1.2011.6.139.11.1.9.1.19
hwAPSpSpectrumAnalysisSwitch This object indicates the status of the spectrum analysis function. The default value is 255.	Enumerationr/w Enumerated Values: 2 enable 255 invalid	.1.3.6.1.4.1.2011.6.139.11.1.9.1.20
hwAPSpWidsDeviceDetectSwitch This object indicates the status of the device detection function. The default value is 255.	Enumerationr/w Enumerated Values: 2 enable 255 invalid	.1.3.6.1.4.1.2011.6.139.11.1.9.1.21
hwAPSpWidsAttackDetectEnBmpobsolete This object indicates the bit map of the brute force attack switch. bit0:weak-iv, bit1:spoof, bit2:flood, bit3:wpa-psk, bit4:wpa2-psk, bit5:wapi-psk, bit6:wep-psk.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.6.139.11.1.9.1.22
hwAPSpWidsRogueContainSwitch This object indicates the status of the device detection function. The default value is 255.	Enumerationr/w Enumerated Values: 2 enable 255 invalid	.1.3.6.1.4.1.2011.6.139.11.1.9.1.23
hwAPSpRadioApId This object indicates the AP ID.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.6.139.11.1.9.1.24
hwAPSpRadioSecondChannel This object indicates a radio-frequency channel. The value ranges from 42,58,106,122,138,155.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.6.139.11.1.9.1.25
hwAPSpAutoChannelSelectSwitch This object indicates the status of the automatic channel selection function. The default value is 255.	Enumerationr/w Enumerated Values: 1 disable 2 enable 255 invalid	.1.3.6.1.4.1.2011.6.139.11.1.9.1.26
hwAPSpAutoTxPowerSelectSwitch This object indicates the status of the automatic power selection function. The default value is 255.	Enumerationr/w Enumerated Values: 1 disable 2 enable 255 invalid	.1.3.6.1.4.1.2011.6.139.11.1.9.1.27
hwAPSpSfnRoamCtsSwitch This object indicates the status of Cts Switch. The default value is 255.	Enumerationr/w Enumerated Values: 1 disable 255 invalid	.1.3.6.1.4.1.2011.6.139.11.1.9.1.28
hwAPSpSfnRoamBeaconSwitch This object indicates the status of Beacon Switch. The default value is 255.	Enumerationr/w Enumerated Values: 1 disable 255 invalid	.1.3.6.1.4.1.2011.6.139.11.1.9.1.29
hwAPSpSfnRoamCtsDelay This object indicates Cts Delay time. The default value is 0.	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.2011.6.139.11.1.9.1.30
hwAPSpRadioCalibrateFlexibleRadio This object indicates the status of Beacon Switch. The default value is 255.	Enumerationr/w Enumerated Values: 1 disable 255 invalid	.1.3.6.1.4.1.2011.6.139.11.1.9.1.31
hwAPSpAutoBandwidthSelectSwitch This object indicates the status of the automatic bandwidth selection function. The default value is 255.	Enumerationr/w Enumerated Values: 1 disable 2 enable 255 invalid	.1.3.6.1.4.1.2011.6.139.11.1.9.1.32
hwAPSpReferenceDataAnalysis This object indicates the status of the referencing data-analysis function. The default value is 255.	Enumerationr/w Enumerated Values: 1 disable 2 enable 255 invalid	.1.3.6.1.4.1.2011.6.139.11.1.9.1.33
hwAPSpWidsAttackDetectWeakIv This object indicates weak IV attack detection. The default value is 255.	Enumerationr/w Enumerated Values: 1 disable 2 enable 255 invalid	.1.3.6.1.4.1.2011.6.139.11.1.9.1.34
hwAPSpWidsAttackDetectSpoof This object indicates spoofing attack detection. The default value is 255.	Enumerationr/w Enumerated Values: 1 disable 2 enable 255 invalid	.1.3.6.1.4.1.2011.6.139.11.1.9.1.35
hwAPSpWidsAttackDetectFlood This object indicates flood attack detection. The default value is 255.	Enumerationr/w Enumerated Values: 1 disable 2 enable 255 invalid	.1.3.6.1.4.1.2011.6.139.11.1.9.1.36
hwAPSpWidsAttackDetectWpaPsk This object indicates brute force attack detection in WPA-PSK authentication. The default value is 255.	Enumerationr/w Enumerated Values: 1 disable 2 enable 255 invalid	.1.3.6.1.4.1.2011.6.139.11.1.9.1.37
hwAPSpWidsAttackDetectWpa2Psk This object indicates brute force attack detection in WPA2-PSK authentication. The default value is 255.	Enumerationr/w Enumerated Values: 1 disable 2 enable 255 invalid	.1.3.6.1.4.1.2011.6.139.11.1.9.1.38
hwAPSpWidsAttackDetectWapiPsk This object indicates brute force attack detection in WAPI-PSK authentication. The default value is 255.	Enumerationr/w Enumerated Values: 1 disable 2 enable 255 invalid	.1.3.6.1.4.1.2011.6.139.11.1.9.1.39
hwAPSpWidsAttackDetectWepShareKey This object indicates brute force attack detection in WEP shared key authentication. The default value is 255.	Enumerationr/w Enumerated Values: 1 disable 2 enable 255 invalid	.1.3.6.1.4.1.2011.6.139.11.1.9.1.40
hwAPSpChannelMonitorSwitch This object indicates the status of the channel monitor function. The default value is 255.	Enumerationr/w Enumerated Values: 2 enable 255 invalid	.1.3.6.1.4.1.2011.6.139.11.1.9.1.41
hwAPSpReference3dData This object indicates the status of the referencing 3d-data function. The default value is 255.	Enumerationr/w Enumerated Values: 1 disable 2 enable 255 invalid	.1.3.6.1.4.1.2011.6.139.11.1.9.1.42

This table is used to create VAPs in an AP specific profile.

hwAPSpecificVapEntry row .1.3.6.1.4.1.2011.6.139.11.1.10.1

Indexes of this table are hwAPSpWlan, hwAPSpRadio, and hwAPSpApMac.

Indexes

hwAPSpWlan hwAPSpRadio hwAPSpApMac

Column	Syntax	OID
hwAPSpWlan This object indicates the WLAN ID. It is the index of the table.	Unsigned32 Constraints: range: 1-16	.1.3.6.1.4.1.2011.6.139.11.1.10.1.1
hwAPSpVapProfile This object indicates the bound VAP profile.	OctetStringr/w Constraints: range: 1-35	.1.3.6.1.4.1.2011.6.139.11.1.10.1.2
hwAPSpVapRowStatus This object indicates the row status of this table. createAndGo(4) and destroy(6) are commonly used.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.6.139.11.1.10.1.3
hwAPSpVapApId This object indicates the AP ID.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.6.139.11.1.10.1.4
hwAPSpVapServiceVlan This object indicates the service VLAN for the VAP. The invalid value is 0.	Unsigned32r/w Constraints: range: 0-4094	.1.3.6.1.4.1.2011.6.139.11.1.10.1.5
hwAPSpVapVlanPool This object indicates the VLAN pool to which the VAP is bound.	OctetStringr/w Constraints: range: 0-31	.1.3.6.1.4.1.2011.6.139.11.1.10.1.6

This table is used to configure country codes, calibration channels, and calibration channel bandwidths.

hwRegulatoryDomainProfileEntry row .1.3.6.1.4.1.2011.6.139.11.1.11.1

The index of this table is hwRegulatoryDomainProfileName.

Indexes

hwRegulatoryDomainProfileName

Column	Syntax	OID
hwRegulatoryDomainProfileName This object indicates the name of a regulatory domain profile. It is the index of the table.	OctetString Constraints: range: 1-35	.1.3.6.1.4.1.2011.6.139.11.1.11.1.1
hwCountryCode This object indicates the country code. Its value range is subject to the country code table. The default value is CN.	OctetStringr/w Constraints: range: 2-8	.1.3.6.1.4.1.2011.6.139.11.1.11.1.2
hwDcaChannel5GBandwidth This object indicates the calibration bandwidth on the 5 GHz frequency band. The default value is 5 ? 1: bw20 MHz ? 2: bw40 MHz ? 3: bw80 MHz ? 5: bw auto.	Enumerationr/w Enumerated Values: 1 bw20Mhz 2 bw40Mhz 3 bw80Mhz 5 bwAuto	.1.3.6.1.4.1.2011.6.139.11.1.11.1.3
hwDcaChannel5GChannelSet This object indicates the calibration channel set on the 5 GHz frequency band.	OctetStringr/w Constraints: range: 1-256	.1.3.6.1.4.1.2011.6.139.11.1.11.1.4
hwDcaChannel2GChannelSet This object indicates the calibration channel set on the 2 GHz frequency band.	OctetStringr/w Constraints: range: 1-256	.1.3.6.1.4.1.2011.6.139.11.1.11.1.5
hwRegulatoryDomainProfilRowStatus This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used ? ROWSTATUS_UNDEFINED: undefined ? ROWSTATUS_ACTIVE: active ? ROWSTATUS_NOTINSERVICE: notInService ? RO…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.6.139.11.1.11.1.6
hwWlanWideBandEnable This object indicates wide band status. The default value is disable.	Enumerationr/w Enumerated Values: 1 disable 2 enable	.1.3.6.1.4.1.2011.6.139.11.1.11.1.7
hwApProfChannelLoadMode This object indicates channel lode mode. The default value is outdoor.	Enumerationr/w Enumerated Values: 1 indoor 2 outdoor	.1.3.6.1.4.1.2011.6.139.11.1.11.1.8
hwDcaChannel6GBandwidth This object indicates the calibration bandwidth on the 6 GHz frequency band. The default value is auto.	Enumerationr/w Enumerated Values: 1 bw20MHz 2 bw40MHz 3 bw80MHz 4 bw160MHz 5 bwAuto	.1.3.6.1.4.1.2011.6.139.11.1.11.1.9
hwDcaChannel6GChannelSet This object indicates the calibration channel set on the 6 GHz frequency band.	OctetStringr/w Constraints: range: 1-256	.1.3.6.1.4.1.2011.6.139.11.1.11.1.10

This table is used to create or delete an AP system profile and configure AP attributes.

hwApSystemProfileEntry row .1.3.6.1.4.1.2011.6.139.11.1.12.1

The index of this table is hwApSystemProfName.

Indexes

hwApSystemProfName

Column	Syntax	OID
hwApSystemProfName This object indicates the name of an AP system profile. It is the index of the table.	OctetString Constraints: range: 1-35	.1.3.6.1.4.1.2011.6.139.11.1.12.1.1
hwApProfStatInterval Description.	Unsigned32r/w Constraints: range: 60-900	.1.3.6.1.4.1.2011.6.139.11.1.12.1.3
hwApProfSampleTime This object indicates the sampling interval for the AC to collecting AP performance data. The default value is 30. It is expressed in seconds.	Unsigned32r/w Constraints: range: 2-300	.1.3.6.1.4.1.2011.6.139.11.1.12.1.4
hwApProfLedSwitch This object indicates whether to enable the AP's LED indicator. The default value is 2.	Enumerationr/w Enumerated Values: 1 off 2 on	.1.3.6.1.4.1.2011.6.139.11.1.12.1.5
hwApProfMaxStaNum This object indicates the maximum number of access users on an AP. The default value is 128.	Unsigned32r/w Constraints: range: 1-256	.1.3.6.1.4.1.2011.6.139.11.1.12.1.6
hwApProfMtu This object indicates the MTU of an AP interface. The default value is 1500.	Unsigned32r/w Constraints: range: 128-1700	.1.3.6.1.4.1.2011.6.139.11.1.12.1.7
hwApProfMeshRole This object indicates a Mesh role. The default value is 1.	Enumerationr/w Enumerated Values: 1 mp 2 mpp	.1.3.6.1.4.1.2011.6.139.11.1.12.1.8
hwApProfTemporaryManagement This object indicates the status of the AP-based offline VAP switch. The default value is 2.	Enumerationr/w Enumerated Values: 1 disable 2 enable	.1.3.6.1.4.1.2011.6.139.11.1.12.1.9
hwApProfManagementVlan This object indicates the management VLAN for APs. The default value is 0xFFFFFFFF.	Unsigned32r/w Constraints: range: 1-4094 range: 4294967295-4294967295	.1.3.6.1.4.1.2011.6.139.11.1.12.1.10
hwApProfHighTempThreshold This object indicates the high temperature alarm threshold on an AP. The default value 0xFFFFFFFF indicates the system threshold of the AP NOTE System thresholds vary with different AP types. For details, see AP device …	Unsigned32r/w Constraints: range: 20-110 range: 4294967295-4294967295	.1.3.6.1.4.1.2011.6.139.11.1.12.1.11
hwApProfLowTempThreshold This object indicates the low temperature alarm threshold on an AP. The default value 0xFFFF indicates the system threshold of the AP.	Integer32r/w Constraints: range: -70-10 range: 65535-65535	.1.3.6.1.4.1.2011.6.139.11.1.12.1.12
hwApProfOpHRxPowerThreshold This object indicates the high power threshold of an optical module. The default value is 1000.	Unsigned32r/w Constraints: range: 1000-65535	.1.3.6.1.4.1.2011.6.139.11.1.12.1.13
hwApProfOpLRxPowerThreshold This object indicates the low power threshold of an optical module. The default value is 50.	Unsigned32r/w Constraints: range: 1-250	.1.3.6.1.4.1.2011.6.139.11.1.12.1.14
hwApProfOpHTempThreshold This object indicates the high temperature threshold of an optical module. The default value is 70.	Unsigned32r/w Constraints: range: 70-125	.1.3.6.1.4.1.2011.6.139.11.1.12.1.15
hwApProfOpLTempThreshold This object indicates the low temperature threshold of an optical module. The default value is -5.	Integer32r/w Constraints: range: -40--5	.1.3.6.1.4.1.2011.6.139.11.1.12.1.16
hwApProfMemoryUsageThreshold This object indicates the memory usage alarm threshold of an AP. The default value is 80. It is expressed in percentage.	Unsigned32r/w Constraints: range: 30-100	.1.3.6.1.4.1.2011.6.139.11.1.12.1.17
hwApProfCpuUsageThreshold This object indicates the CPU usage alarm threshold of an AP. The default value is 90. It is expressed in percentage.	Unsigned32r/w Constraints: range: 50-100	.1.3.6.1.4.1.2011.6.139.11.1.12.1.18
hwApProfTelnetSwitch This object indicates whether to enable Telnet. The default value is 1.	Enumerationr/w Enumerated Values: 1 disable 2 enable	.1.3.6.1.4.1.2011.6.139.11.1.12.1.19
hwApProfSTelnetSwitch This object indicates whether to enable SSH. The default value is 2.	Enumerationr/w Enumerated Values: 1 disable 2 enable	.1.3.6.1.4.1.2011.6.139.11.1.12.1.20
hwApProfConsoleSwitch This object indicates whether to enable the console. The default value is 2.	Enumerationr/w Enumerated Values: 1 disable 2 enable	.1.3.6.1.4.1.2011.6.139.11.1.12.1.21
hwApProfLogRecordLevel This object indicates the log backup level. The default value is 7.	Enumerationr/w Enumerated Values: 1 emergency 2 alert 3 critical 4 error 5 warning 6 notice 7 info 8 debug	.1.3.6.1.4.1.2011.6.139.11.1.12.1.22
hwApProfLogServerIp This object indicates the IP address of the log server.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2011.6.139.11.1.12.1.23
hwApProfLogServerIpv6 This object indicates the IPv6 address of the log server.	OctetStringr/w	.1.3.6.1.4.1.2011.6.139.11.1.12.1.24
hwApProfAlarmRestrictionSwitch This object indicates the status of the alarm suppression switch. The default value is 2.	Enumerationr/w Enumerated Values: 1 disable 2 enable	.1.3.6.1.4.1.2011.6.139.11.1.12.1.25
hwApProfAlarmRestrictionPeriod This object indicates the alarm suppression period. The default value is 60 seconds.	Unsigned32r/w Constraints: range: 10-300	.1.3.6.1.4.1.2011.6.139.11.1.12.1.26
hwApProfKeepServiceSwitch This object indicates whether to enable the offline service retaining function. The default value is 2.	Enumerationr/w Enumerated Values: 1 enable 2 disable 3 allowaccess 4 allowAccessAlsoNoauth	.1.3.6.1.4.1.2011.6.139.11.1.12.1.27
hwApProfProtectPriority This object indicates the AC priority. A smaller value indicates a higher priority. The default value 0xFFFFFFFF indicates that no priority is configured.	Unsigned32r/w Constraints: range: 0-7 range: 4294967295-4294967295	.1.3.6.1.4.1.2011.6.139.11.1.12.1.28
hwApProfProtectACIp This object indicates the IP address of the standby AC.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2011.6.139.11.1.12.1.29
hwApProfProtectACIpv6 This object indicates the IPv6 address of the standby AC.	OctetStringr/w	.1.3.6.1.4.1.2011.6.139.11.1.12.1.30
hwApProfEapStartMode This object indicates the EAP Start packet conversion mode. The default value is 2.	Enumerationr/w Enumerated Values: 1 broadcast 2 multicast 3 unicast	.1.3.6.1.4.1.2011.6.139.11.1.12.1.31
hwApProfEapStartTransform This object indicates the EAP Start packet conversion mode. The default value is 1.	Enumerationr/w Enumerated Values: 1 equalBssid 2 always	.1.3.6.1.4.1.2011.6.139.11.1.12.1.32
hwApProfEapStartUnicastMac This object indicates that EAP Start packets are converted to those with specific MAC addresses.	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2011.6.139.11.1.12.1.33
hwApProfEapResponseMode This object indicates the EAP Response packet conversion mode. The default value is 4.	Enumerationr/w Enumerated Values: 1 broadcast 2 multicast 3 specific 4 learnling	.1.3.6.1.4.1.2011.6.139.11.1.12.1.34
hwApProfEapResponseTransform This object indicates the EAP Response packet conversion mode. The default value is 1.	Enumerationr/w Enumerated Values: 1 equalBssid 2 always	.1.3.6.1.4.1.2011.6.139.11.1.12.1.35
hwApProfEapResponseUnicastMac This object indicates that EAP Response packets are converted to those with specific MAC addresses.	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2011.6.139.11.1.12.1.36
hwApProfLldpRestartDelay This object indicates the delay for re-enabling LLDP. The default value is 2. It is expressed in seconds.	Unsigned32r/w Constraints: range: 1-10	.1.3.6.1.4.1.2011.6.139.11.1.12.1.37
hwApProfLldpAdminStatus This object indicates the operation mode of LLDP. The default value is 1.	Enumerationr/w Enumerated Values: 1 txrx 2 rx 3 tx	.1.3.6.1.4.1.2011.6.139.11.1.12.1.38
hwApProfLldpRetransDelay This object indicates the message retransmitting delay. The default value is 2. It is expressed in seconds.	Unsigned32r/w Constraints: range: 1-8192	.1.3.6.1.4.1.2011.6.139.11.1.12.1.39
hwApProfLldpRetransHoldMultiplier This object indicates the hold time multiplier of device information on neighbors (cardinal number is the interval time). The default value is 4.	Unsigned32r/w Constraints: range: 2-10	.1.3.6.1.4.1.2011.6.139.11.1.12.1.40
hwApProfLldpInterval This object indicates the interval at which LLDP packets are sent. The default value is 30 seconds.	Unsigned32r/w Constraints: range: 5-32768	.1.3.6.1.4.1.2011.6.139.11.1.12.1.41
hwApProfLldpReportInterval This object indicates the interval at which LLDP packets are reported. The default value is 30 seconds.	Unsigned32r/w Constraints: range: 5-3600	.1.3.6.1.4.1.2011.6.139.11.1.12.1.42
hwApProfStaAccessMode This object indicates the access mode. The default value is 1.	Enumerationr/w Enumerated Values: -1 unknown 1 disable 2 blacklist 3 whitelist	.1.3.6.1.4.1.2011.6.139.11.1.12.1.43
hwApProfStaAccessModeProfile This object indicates blacklist and whitelist profiles.	OctetStringr/w Constraints: range: 0-35	.1.3.6.1.4.1.2011.6.139.11.1.12.1.44
hwApProfRowStatus This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used ? ROWSTATUS_UNDEFINED: undefined ? ROWSTATUS_ACTIVE: active ? ROWSTATUS_NOTINSERVICE: notInService ? RO…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.6.139.11.1.12.1.45
hwApProfSFTPSwitch This object indicates whether to enable the SFTP. The default value is 2.	Enumerationr/w Enumerated Values: 1 disable 2 enable	.1.3.6.1.4.1.2011.6.139.11.1.12.1.46
hwApProfDynamicBlackListAgingTime This object indicates the aging time of the dynamic blacklist entries. The default value is 300.	Unsigned32r/w Constraints: range: 180-3600	.1.3.6.1.4.1.2011.6.139.11.1.12.1.47
hwApProfAntennaOutputMode Description.	Enumerationr/w Enumerated Values: 1 combine 2 split	.1.3.6.1.4.1.2011.6.139.11.1.12.1.48
hwApProfMppActiveReselectionSwitch This object indicates of mpp active reselection.	Enumerationr/w Enumerated Values: 1 disable 2 enable	.1.3.6.1.4.1.2011.6.139.11.1.12.1.49
hwApProfSpectrumServerIPAddress This object indicates the IPv6 address of the spectrum analysis server. You choose an IPv4 or IPv6 address. By default, the IPv4 address 255.255.255.255 is used.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2011.6.139.11.1.12.1.50
hwApProfSpectrumServerIPv6Address This object indicates the IPv6 address of the spectrum analysis server. You choose an IPv4 or IPv6 address. By default, it is not configured.	OctetStringr/w	.1.3.6.1.4.1.2011.6.139.11.1.12.1.51
hwApProfSpectrumServerPort This object indicates the port of the spectrum analysis server. The default value is 0.	Unsigned32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.2011.6.139.11.1.12.1.52
hwApProfSpectrumViaACSwitch This object indicates the status of the spectrum analysis function. The default value is 1.	Enumerationr/w Enumerated Values: 1 disable 2 enable	.1.3.6.1.4.1.2011.6.139.11.1.12.1.53
hwApProfSpectrumViaACPort This object indicates the port number used by the AP to report spectrum analysis data to the AC. The default value is 0.	Unsigned32r/w Constraints: range: 0-0 range: 5000-65535	.1.3.6.1.4.1.2011.6.139.11.1.12.1.54
hwApProfSpectrumNonWifiDeviceAgingTime This object indicates the aging time of non-WLAN devices on the AC. The default value is 3 minutes.	Unsigned32r/w Constraints: range: 1-30	.1.3.6.1.4.1.2011.6.139.11.1.12.1.55
hwApProfPoeMaxPower This object indicates the maximum output power of the AP.The default value is 750000.	Unsigned32r/w Constraints: range: 15400-750000	.1.3.6.1.4.1.2011.6.139.11.1.12.1.56
hwApProfPoePowerReserved This object indicates the percentage of reserved PoE power to the available PoE power.The default value is 255.	Unsigned32r/w Constraints: range: 0-100 range: 255-255	.1.3.6.1.4.1.2011.6.139.11.1.12.1.57
hwApProfPoePowerThreshold This object indicates the alarm threshold of PoE power consumption percentage.The default value is 255.	Unsigned32r/w Constraints: range: 0-100 range: 255-255	.1.3.6.1.4.1.2011.6.139.11.1.12.1.58
hwApProfPoeAfInrushSwitch This object indicates whether to enable the IEEE 802.3at-compliant device to provide power in accordance with IEEE 802.3af.The default value is 1.	Enumerationr/w Enumerated Values: 1 disable 2 enable	.1.3.6.1.4.1.2011.6.139.11.1.12.1.59
hwApProfPoeHighInrushSwitch This object indicates whether to enable the device to allow high inrush current during power-on.The default value is 1.	Enumerationr/w Enumerated Values: 1 disable 2 enable	.1.3.6.1.4.1.2011.6.139.11.1.12.1.60
hwApProfPrimaryLinkIPv4 This object indicates the IP address of the primary AC.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2011.6.139.11.1.12.1.61
hwApProfPrimaryLinkIPv6 This object indicates the IPv6 address of the primary AC.	OctetStringr/w	.1.3.6.1.4.1.2011.6.139.11.1.12.1.62
hwApProfBackupLinkIPv4 This object indicates the IP address of the backup AC.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2011.6.139.11.1.12.1.63
hwApProfBackupLinkIPv6 This object indicates the IPv6 address of the backup AC.	OctetStringr/w	.1.3.6.1.4.1.2011.6.139.11.1.12.1.64
hwApProfLedOffTimeRange This object indicates whether to make a configured Led off time range effective.	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.2011.6.139.11.1.12.1.65
hwApProfUsbSwitch This object indicates whether to enable the USB. The default value is 1.	Enumerationr/w Enumerated Values: 1 disable 2 enable 3 enable5w	.1.3.6.1.4.1.2011.6.139.11.1.12.1.66
hwApProfBroadcastSuppressionArpEnable This object indicates whether to enable the arp broadcast suppression.The default value is 2.	Enumerationr/w Enumerated Values: 1 disable 2 enable	.1.3.6.1.4.1.2011.6.139.11.1.12.1.67
hwApProfBroadcastSuppressionArpThreshold This object indicates the threshold of arp broadcast suppression. The default value is 256.	Unsigned32r/w Constraints: range: 64-1024	.1.3.6.1.4.1.2011.6.139.11.1.12.1.68
hwApProfBroadcastSuppressionIgmpEnable This object indicates whether to enable the igmp broadcast suppression.The default value is 2.	Enumerationr/w Enumerated Values: 1 disable 2 enable	.1.3.6.1.4.1.2011.6.139.11.1.12.1.69
hwApProfBroadcastSuppressionIgmpThreshold This object indicates the threshold of igmp broadcast suppression. The default value is 256.	Unsigned32r/w Constraints: range: 64-1024	.1.3.6.1.4.1.2011.6.139.11.1.12.1.70
hwApProfBroadcastSuppressionNdEnable This object indicates whether to enable the nd broadcast suppression.The default value is 2.	Enumerationr/w Enumerated Values: 1 disable 2 enable	.1.3.6.1.4.1.2011.6.139.11.1.12.1.71
hwApProfBroadcastSuppressionNdThreshold This object indicates the threshold of nd broadcast suppression. The default value is 256.	Unsigned32r/w Constraints: range: 64-1024	.1.3.6.1.4.1.2011.6.139.11.1.12.1.72
hwApProfBroadcastSuppressionOtherEnable This object indicates whether to enable the other broadcast suppression.The default value is 2.	Enumerationr/w Enumerated Values: 1 disable 2 enable	.1.3.6.1.4.1.2011.6.139.11.1.12.1.73
hwApProfBroadcastSuppressionOtherThreshold This object indicates the threshold of other broadcast suppression. The default value is 256.	Unsigned32r/w Constraints: range: 64-1024	.1.3.6.1.4.1.2011.6.139.11.1.12.1.74
hwApProfBroadcastSuppressionAllEnable This object indicates whether to enable all the broadcast suppression.The default value is 2.	Enumerationr/w Enumerated Values: 1 disable 2 enable	.1.3.6.1.4.1.2011.6.139.11.1.12.1.75
hwApProfCapwapDtlsDataSwitch This object indicates the status of the DTLS function of data-link. The default value is 3.	Enumerationr/w Enumerated Values: 1 disable 2 enable 3 notconfig	.1.3.6.1.4.1.2011.6.139.11.1.12.1.76
hwApProfTemporaryManagementPsk This object indicates the psk of the AP-based offline VAP.	OctetStringr/w Constraints: range: 6-6 range: 8-108	.1.3.6.1.4.1.2011.6.139.11.1.12.1.77
hwApProfProtectLinkSwitchMode This object indicates the mode of the ac protect link-switch. The default value is 1.	Enumerationr/w Enumerated Values: 1 priority 2 networkstabilization	.1.3.6.1.4.1.2011.6.139.11.1.12.1.78
hwApProfProtectLinkSwitchEchoProbeTime This object indicates the time of echo probe. The default value is 20.	Unsigned32r/w Constraints: range: 6-100	.1.3.6.1.4.1.2011.6.139.11.1.12.1.79
hwApProfProtectLinkSwitchStartThreshold This object indicates the start threshold of packet-loss rate. The default value is 20.	Unsigned32r/w Constraints: range: 5-60	.1.3.6.1.4.1.2011.6.139.11.1.12.1.80
hwApProfProtectLinkSwitchGapThreshold This object indicates the gap threshold of packet-loss rate. The default value is 15.	Unsigned32r/w Constraints: range: 5-60	.1.3.6.1.4.1.2011.6.139.11.1.12.1.81
hwApProfCardConnectType Description.	Enumerationr/w Enumerated Values: 1 serial 2 ethernet	.1.3.6.1.4.1.2011.6.139.11.1.12.1.82
hwApProfLldpReportEnable This object indicates whether to enable the lldp report .The default value is 1.	Enumerationr/w Enumerated Values: 1 disable 2 enable	.1.3.6.1.4.1.2011.6.139.11.1.12.1.83
hwApProfDhcpv4Option12 This object indicates the type of dhcpve option12 .The default value is 1.	Enumerationr/w Enumerated Values: 1 apTypeApMac 2 apName 3 disable	.1.3.6.1.4.1.2011.6.139.11.1.12.1.84
hwApProfBcSuppresionAutoDetectThreshold This object indicates the value of broadcast value .The default value is 256.	Unsigned32r/w Constraints: range: 64-1024	.1.3.6.1.4.1.2011.6.139.11.1.12.1.85
hwApProfMcSuppresionAutoDetectThreshold This object indicates the value of multicast value .The default value is 256.	Unsigned32r/w Constraints: range: 64-1024	.1.3.6.1.4.1.2011.6.139.11.1.12.1.86
hwApProfUcSuppresionAutoDetectThreshold This object indicates the value of unicast value .The default value is 256.	Unsigned32r/w Constraints: range: 64-1024	.1.3.6.1.4.1.2011.6.139.11.1.12.1.87
hwApProfConsoleBLEMode This object indicates the type of ble console .The default value is 2.	Enumerationr/w Enumerated Values: 1 disable 2 dynamic 3 persistent	.1.3.6.1.4.1.2011.6.139.11.1.12.1.88
hwApProfDiskUsageThreshold This object indicates the AP disk usage rate alarm threshold. The default value is 95.	Unsigned32r/w Constraints: range: 6-100	.1.3.6.1.4.1.2011.6.139.11.1.12.1.89
hwApProfLogServerPort This object indicates syslog server port. The default value is 514.	Unsigned32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.2011.6.139.11.1.12.1.90
hwApProfStationConnectivityDetectSwitch This object indicates whether to disable the Station Connectivity Detect. The default value is enable.	Enumerationr/w Enumerated Values: 1 disable 2 enable	.1.3.6.1.4.1.2011.6.139.11.1.12.1.91
hwApProfStaArpNDProxyBeforeAssoc This object indicates the mode of the station arp-nd-proxy before association .The default value is 1.	Enumerationr/w Enumerated Values: 1 no 2 yes	.1.3.6.1.4.1.2011.6.139.11.1.12.1.92
hwApProfUcSuppressionAutoDetectSwitch This object indicates the switch of the unicast-suppression auto detect .The default value is 2.	Enumerationr/w Enumerated Values: 1 disable 2 enable	.1.3.6.1.4.1.2011.6.139.11.1.12.1.93
hwApProfPkiCertFileType This object indicates the AP PKI certificate file type.	Enumerationr/w Enumerated Values: 1 pem 2 pkcs12 255 invalid	.1.3.6.1.4.1.2011.6.139.11.1.12.1.94
hwApProfPkiCertFileName This object indicates the AP PKI certificate filename.	OctetStringr/w Constraints: range: 0-63	.1.3.6.1.4.1.2011.6.139.11.1.12.1.95
hwApProfPkiCertFilePassword This object indicates the AP PKI certificate file password.	OctetStringr/w Constraints: range: 6-68	.1.3.6.1.4.1.2011.6.139.11.1.12.1.96
hwApProfHighTempApEnvironmentThreshold Description.	Unsigned32r/w Constraints: range: 20-110 range: 4294967295-4294967295	.1.3.6.1.4.1.2011.6.139.11.1.12.1.97
hwApProfHighTempCpuThreshold Description.	Unsigned32r/w Constraints: range: 20-110 range: 4294967295-4294967295	.1.3.6.1.4.1.2011.6.139.11.1.12.1.98
hwApProfHighTempNpThreshold Description.	Unsigned32r/w Constraints: range: 20-110 range: 4294967295-4294967295	.1.3.6.1.4.1.2011.6.139.11.1.12.1.99
hwApProfLowTempApEnvironmentThreshold Description.	Integer32r/w Constraints: range: -70-10 range: 65535-65535	.1.3.6.1.4.1.2011.6.139.11.1.12.1.100
hwApProfLowTempCpuThreshold Description.	Integer32r/w Constraints: range: -70-10 range: 65535-65535	.1.3.6.1.4.1.2011.6.139.11.1.12.1.101
hwApProfLowTempNpThreshold Description.	Integer32r/w Constraints: range: -70-10	.1.3.6.1.4.1.2011.6.139.11.1.12.1.102
hwApSystemProfileNPFastForwardingSwitch This object indicates whether to enable the NP fast forwarding function. The default value is 1.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.2011.6.139.11.1.12.1.103
hwApSystemProfileNPCapwapReassemblySwitch This object indicates whether to enable the NP capwap reassembly function. The default value is 1.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.2011.6.139.11.1.12.1.104
hwApProfRadioMode This object indicates the radio mode for AP. The default value is 255.	Enumerationr/w Enumerated Values: 1 twoRadioStandard 2 twoRadio5gEnhanced 3 twoRadio2gEnhanced 4 threeRadio 5 twoRadioIndependentScan 255 default	.1.3.6.1.4.1.2011.6.139.11.1.12.1.105
hwApProfPowerForceWorkmode This object indicates the force workmode of power. The default value is 255.	Enumerationr/w Enumerated Values: 1 af 2 at 3 bt60 4 bt90 255 invalid	.1.3.6.1.4.1.2011.6.139.11.1.12.1.106
hwApServiceExpAnalysisInterval This object indicates the SEA monitor interval.	Integer32r/w Constraints: range: 2-30	.1.3.6.1.4.1.2011.6.139.11.1.12.1.107
hwApCPETunnelLocalIPv4Address This object indicates the IPv4 address of the AP on a CPE tunnel.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2011.6.139.11.1.12.1.108
hwApTerminalIdentifySwitch This object indicates the terminal-identify switch. The default value is 2.	Enumerationr/w Enumerated Values: 1 disable 2 enable	.1.3.6.1.4.1.2011.6.139.11.1.12.1.109
hwApSIpFpmUserFlowLimit This object indicates the user sipfpm flow limit.	Integer32r/w Constraints: range: 100-400 range: 65535-65535	.1.3.6.1.4.1.2011.6.139.11.1.12.1.110
hwApProfMeshRouteAgingTime This object indicates the mesh route aging time. The default value is 5.	Unsigned32r/w Constraints: range: 1-15	.1.3.6.1.4.1.2011.6.139.11.1.12.1.111
hwApMeshLeafNode This object indicates whether to enable mesh leaf node function. The default value is 2.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.2011.6.139.11.1.12.1.112
hwApLocalManagementSwitch This object indicates the switch of the AP local management. The default value is disable(1).	Enumerationr/w Enumerated Values: 1 disable 2 enable	.1.3.6.1.4.1.2011.6.139.11.1.12.1.113
hwApLocalManagementIPAddress This object indicates the AP's local management IPv4 address.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2011.6.139.11.1.12.1.114
hwApLocalManagementIPMask This object indicates the AP's local management IPv4 mask.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2011.6.139.11.1.12.1.115
hwApCapwapDtlsCertCnType This object indicates whether the global cert CN function for CAPWAP DTLS is enabled. The default value is 1.	Enumerationr/w Enumerated Values: 1 nocert 2 bysn 3 bystring	.1.3.6.1.4.1.2011.6.139.11.1.12.1.116
hwApCapwapDtlsCertCnString This object indicates whether the global cert CN string.	OctetStringr/w Constraints: range: 0-64	.1.3.6.1.4.1.2011.6.139.11.1.12.1.117
hwApCPEManagementListenPort This object indicates the CPE management listen port. The default value is 15440.	Integer32r/w Constraints: range: 1025-65535	.1.3.6.1.4.1.2011.6.139.11.1.12.1.118
hwApCPEManagementCpePort This object indicates the CPE management CPE port. The default value is 15442.	Integer32r/w Constraints: range: 1025-65535	.1.3.6.1.4.1.2011.6.139.11.1.12.1.119
hwApDistributeModeSwitch This object indicates the distribute mode switch. The default value is 1.	Enumerationr/w Enumerated Values: 1 disable 2 enable	.1.3.6.1.4.1.2011.6.139.11.1.12.1.120

This table is used to create or delete an AP wired port link profile and modify or query attributes.

hwAPWiredPortProfileEntry row .1.3.6.1.4.1.2011.6.139.11.1.13.1

The index of this table is hwAPWiredPortProfileName.

Indexes

hwAPWiredPortProfileName

Column	Syntax	OID
hwAPWiredPortProfileName This object indicates the name of an AP wired port link profile.	OctetString Constraints: range: 1-35	.1.3.6.1.4.1.2011.6.139.11.1.13.1.1
hwAPWiredPortPortLinkProfileName This object indicates the bound AP wired port link profile.	OctetStringr/w Constraints: range: 1-35	.1.3.6.1.4.1.2011.6.139.11.1.13.1.2
hwAPWiredPortProfilePortDesc This object indicates the description of an interface.	OctetStringr/w Constraints: range: 0-242	.1.3.6.1.4.1.2011.6.139.11.1.13.1.3
hwAPWiredPortProfilePortEthTrunkID This object indicates the ID of a Trunk. 0 is valid and 0xFFFFFFFF is invalid. The default value is 0xFFFFFFFF.	Unsigned32r/w Constraints: range: 0-0 range: 255-255	.1.3.6.1.4.1.2011.6.139.11.1.13.1.4
hwAPWiredPortProfilePortSTPSwitch This object indicates whether to enable STP on wired ports. The default value is 3.	Enumerationr/w Enumerated Values: 1 disable 2 enable 3 auto	.1.3.6.1.4.1.2011.6.139.11.1.13.1.5
hwAPWiredPortProfilePortMode This object indicates the mode of the wired port. the default value is 256.	Enumerationr/w Enumerated Values: 1 root 2 endpoint 3 middle 256 null	.1.3.6.1.4.1.2011.6.139.11.1.13.1.6
hwAPWiredPortProfilePortVlanPvid This object indicates the PVID of a port. The default value is 1.	Unsigned32r/w Constraints: range: 0-4094	.1.3.6.1.4.1.2011.6.139.11.1.13.1.7
hwAPWiredPortProfilePortVlanTagged This object indicates whether to tag ports with VLAN IDs. The default value is 0.	OctetStringr/w Constraints: range: 0-1024	.1.3.6.1.4.1.2011.6.139.11.1.13.1.8
hwAPWiredPortProfilePortVlanUntagged This object indicates whether to untag VLAN IDS from ports. The default value is 1.	OctetStringr/w Constraints: range: 0-1024	.1.3.6.1.4.1.2011.6.139.11.1.13.1.9
hwAPWiredPortProfileUserIsolate This object indicates the status of the user isolation function. The default value is 1.	Enumerationr/w Enumerated Values: 1 disable 2 l3Isolate 3 l2Isolate	.1.3.6.1.4.1.2011.6.139.11.1.13.1.10
hwAPWiredPortProfileDhcpTrust This object indicates whether a port is configured as a DHCP trusted port. The default value is 1.	Enumerationr/w Enumerated Values: 1 disable 2 enable	.1.3.6.1.4.1.2011.6.139.11.1.13.1.11
hwAPWiredPortProfileNdTrust This object indicates whether a port is configured as a ND trusted port. The default value is 1.	Enumerationr/w Enumerated Values: 1 disable 2 enable	.1.3.6.1.4.1.2011.6.139.11.1.13.1.12
hwAPWiredPortProfileRowStatus This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.6.139.11.1.13.1.13
hwAPWiredPortProfileLearnAddress This object indicates whether to enable ipv4 address learning.The default value is 1.	Enumerationr/w Enumerated Values: 1 disable 2 enable	.1.3.6.1.4.1.2011.6.139.11.1.13.1.14
hwAPWiredPortProfileIpBindCheck This object indicates whether to enable IP packet checking against the binding table.The default value is 1.	Enumerationr/w Enumerated Values: 1 disable 2 enable	.1.3.6.1.4.1.2011.6.139.11.1.13.1.15
hwAPWiredPortProfileArpBindCheck This object indicates whether to enable ARP packet checking against the binding table.The default value is 1.	Enumerationr/w Enumerated Values: 1 disable 2 enable	.1.3.6.1.4.1.2011.6.139.11.1.13.1.16
hwAPWiredPortProfileSTPAutoShutdown This object indicates whether to enable STP-triggered port shutdown.The default value is 1.	Enumerationr/w Enumerated Values: 1 disable 2 enable	.1.3.6.1.4.1.2011.6.139.11.1.13.1.17
hwAPWiredPortProfileSTPAutoShutdownRecoveryTime This object indicates the automatic port recovery time after an STP-triggered shutdown.The default value is 600.	Unsigned32r/w Constraints: range: 600-3600	.1.3.6.1.4.1.2011.6.139.11.1.13.1.18
hwAPWiredPortProfileTrafficOptimizeSuppressionBc This object indicates the rate limit for broadcast storm suppression.The default value is 0xFFFFFFFF.	Unsigned32r/w Constraints: range: 0-14881000	.1.3.6.1.4.1.2011.6.139.11.1.13.1.19
hwAPWiredPortProfileTrafficOptimizeSuppressionUc This object indicates the rate limit for unknown unicast storm suppression.The default value is 0xFFFFFFFF.	Unsigned32r/w Constraints: range: 0-14881000	.1.3.6.1.4.1.2011.6.139.11.1.13.1.20
hwAPWiredPortProfileTrafficOptimizeSuppressionMc This object indicates the rate limit for multicast storm suppression.The default value is 0xFFFFFFFF.	Unsigned32r/w Constraints: range: 0-14881000	.1.3.6.1.4.1.2011.6.139.11.1.13.1.21
hwAPWiredPortProfileIGMPSnooping This object indicates whether to enable IGMP-snooping.The default value is 1.	Enumerationr/w Enumerated Values: 1 disable 2 enable	.1.3.6.1.4.1.2011.6.139.11.1.13.1.22
hwAPWiredPortProfileLearnIpv6Address This object indicates whether to enable ipv6 address learning.The default value is 1.	Enumerationr/w Enumerated Values: 1 disable 2 enable	.1.3.6.1.4.1.2011.6.139.11.1.13.1.23
hwAPWiredPortProfileMLDSnooping This object indicates whether to enable MLD-snooping.The default value is 1.	Enumerationr/w Enumerated Values: 1 disable 2 enable	.1.3.6.1.4.1.2011.6.139.11.1.13.1.24
hwAPWiredPortProfileTrafficOptimizeTcpAdjustMss Description.	Unsigned32r/w Constraints: range: 128-2048 range: 4294967295-4294967295	.1.3.6.1.4.1.2011.6.139.11.1.13.1.25
hwAPWiredPortProfilePortSec This object indicates the status of the port security function. The default value is 1.	Enumerationr/w Enumerated Values: 1 disable 2 enable	.1.3.6.1.4.1.2011.6.139.11.1.13.1.26
hwAPWiredPortProfilePortSecMACMaxNum This object indicates the max number of the port security mac. The default value is 1.	Integer32r/w Constraints: range: 1-64	.1.3.6.1.4.1.2011.6.139.11.1.13.1.27
hwAPWiredPortProfilePortSecStickyMac This object indicates the status of the port security sticky mac function. The default value is 1.	Enumerationr/w Enumerated Values: 1 disable 2 enable	.1.3.6.1.4.1.2011.6.139.11.1.13.1.28
hwAPWiredPortProfilePortSecProtectAction This object indicates the protect action of the port security function. The default value is 1.	Enumerationr/w Enumerated Values: 1 restrict 2 protect	.1.3.6.1.4.1.2011.6.139.11.1.13.1.29
hwAPWiredPortProfilePortForwardMode This object indicates whether to config port forward mode.The default value is direct forward.	Enumerationr/w Enumerated Values: 1 directForward 2 tunnel	.1.3.6.1.4.1.2011.6.139.11.1.13.1.30
hwAPWiredPortDot1xClientProfileName This object indicates the bound dot1x client profile.	OctetStringr/w Constraints: range: 0-31	.1.3.6.1.4.1.2011.6.139.11.1.13.1.31
hwAPWiredPortProfileMACLearningPriority This object indicates the mac learning priority of wired ports. The default value is 0.	Unsigned32r/w Constraints: range: 0-3	.1.3.6.1.4.1.2011.6.139.11.1.13.1.32
hwAPWiredPortProfileMACLearningAction This object indicates the packet forwarding policy of wired ports during mac address learning. The default value is forward(1).	Enumerationr/w Enumerated Values: 1 forward 2 discard	.1.3.6.1.4.1.2011.6.139.11.1.13.1.33
hwAPWiredPortProfileOption82InsertSwitch This object indicates the status of the function of appending the option 82 field to DHCP messages from AP wired ports. The default value is 1.	Enumerationr/w Enumerated Values: 1 disable 2 enable	.1.3.6.1.4.1.2011.6.139.11.1.13.1.34
hwAPWiredPortProfileOption82InsertRidFormat This object indicates the format of remote-id(RID) in the Option 82 field to DHCP messages from AP wired ports. The default value is 1.	Enumerationr/w Enumerated Values: 1 apMac 2 apMacIfName 3 apName 4 apNameIfName 5 apLocation 6 apLocationIfName 7 userDefined	.1.3.6.1.4.1.2011.6.139.11.1.13.1.35
hwAPWiredPortProfileOption82RidMacFormat This object indicates the AP MAC address format of remote-id(RID) in the Option 82 field to DHCP messages from AP wired ports. The default value is 0.	Enumerationr/w Enumerated Values: 1 default 2 normal 3 compact 4 hex 5 colon	.1.3.6.1.4.1.2011.6.139.11.1.13.1.36
hwAPWiredPortProfileOption82RidUserDefined This object indicates the user-defined format of remote-id(RID) in the Option 82 field to DHCP messages from AP wired ports.	OctetStringr/w Constraints: range: 0-255	.1.3.6.1.4.1.2011.6.139.11.1.13.1.37
hwAPWiredPortProfileOption82RidPattern This object indicates the pattern of remote-id(RID) in the Option 82 field to DHCP messages from AP wired ports. The default value is 1.	Enumerationr/w Enumerated Values: 1 default 2 semicolon	.1.3.6.1.4.1.2011.6.139.11.1.13.1.38
hwAPWiredPortProfileOption82InsertCidFormat This object indicates the format of circuit-id(CID) in the Option 82 field to DHCP messages from AP wired ports. The default value is 1.	Enumerationr/w Enumerated Values: 1 apMac 2 apMacIfName 3 apName 4 apNameIfName 5 apLocation 6 apLocationIfName 7 userDefined	.1.3.6.1.4.1.2011.6.139.11.1.13.1.39
hwAPWiredPortProfileOption82CidMacFormat This object indicates the AP MAC address format of circuit-id(CID) in the Option 82 field to DHCP messages from AP wired ports. The default value is 0.	Enumerationr/w Enumerated Values: 1 default 2 normal 3 compact 4 hex 5 colon	.1.3.6.1.4.1.2011.6.139.11.1.13.1.40
hwAPWiredPortProfileOption82CidUserDefined This object indicates the user-defined format of circuit-id(CID) in the Option 82 field to DHCP messages from AP wired ports.	OctetStringr/w Constraints: range: 0-255	.1.3.6.1.4.1.2011.6.139.11.1.13.1.41
hwAPWiredPortProfileOption82CidPattern This object indicates the pattern of circuit-id(CID) in the Option 82 field to DHCP messages from AP wired ports. The default value is 1.	Enumerationr/w Enumerated Values: 1 default 2 semicolon	.1.3.6.1.4.1.2011.6.139.11.1.13.1.42