HUAWEI-VPN-DIAGNOSTICS-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
7
Rows
7
Columns
55

hwOamMacOperTable

table
.1.3.6.1.4.1.2011.5.25.172.1.2 · 1 row entry · 8 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwOamMacOperTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-VPN-DIAGNOSTICS-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-VPN-DIAGNOSTICS-MIB::hwOamMacOperTable' 
A table which to be populate or purge operation.
hwOamMacOperEntry row .1.3.6.1.4.1.2011.5.25.172.1.2.1
Entries of hwOamMacOperTable.
Indexes
Column Syntax OID
hwOamMacOperIndex
The index of hwOamMacOperIndex,it is always 1.
Integer32
Constraints:
range: 1-1
 .1.3.6.1.4.1.2011.5.25.172.1.2.1.1
hwOamMacOperAddress
The MAC that to be populated or purged.
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.2011.5.25.172.1.2.1.2
hwOamMacOperVsiName
The name or other identifier referring to the VSI
which is correlative to the hwOamMac.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.2011.5.25.172.1.2.1.3
hwOamMacOperType
The operate type,1 means populate,2 means purge.
MacOpTyper/w
Type Values:
1populate
2purge
 .1.3.6.1.4.1.2011.5.25.172.1.2.1.4
hwOamMacOperRegister
while purge a OAM MAC,register it to be a reserved MAC .
1 means register, 2 means not register. Defaut is 2.
P-BRIDGE-MIBEnabledStatusr/w
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.2011.5.25.172.1.2.1.5
hwOamMacOperFlood
Broadcast the packet or not. 1 means broadcast, 2 means don`t broadcast.Defaut is 2.
P-BRIDGE-MIBEnabledStatusr/w
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.2011.5.25.172.1.2.1.6
hwOamMacOperNum
The number of packets which want to be sent.
Integer32r/w
Constraints:
range: 1-5
 .1.3.6.1.4.1.2011.5.25.172.1.2.1.7
hwOamMacOperRowStatus
The operating state of the row.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.5.25.172.1.2.1.8

hwOamMacListTable

table
.1.3.6.1.4.1.2011.5.25.172.1.3 · 1 row entry · 2 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwOamMacListTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-VPN-DIAGNOSTICS-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-VPN-DIAGNOSTICS-MIB::hwOamMacListTable' 
A table which displays the OAM MAC applied at huawei.
hwOamMacListEntry row .1.3.6.1.4.1.2011.5.25.172.1.3.1
Display the OAM MAC applied at huawei.
Indexes
Column Syntax OID
hwOamMacListIndex
The index of hwOamMacListIndex.
Integer32
Constraints:
range: 1-10
 .1.3.6.1.4.1.2011.5.25.172.1.3.1.1
hwOamMacListAddress
The OAM MAC applied at huawei.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.2011.5.25.172.1.3.1.2

hwOamMacDisplayTable

table
.1.3.6.1.4.1.2011.5.25.172.1.4 · 1 row entry · 6 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwOamMacDisplayTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-VPN-DIAGNOSTICS-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-VPN-DIAGNOSTICS-MIB::hwOamMacDisplayTable' 
A table which displays the result of populate or purge operation.
hwOamMacDisplayEntry row .1.3.6.1.4.1.2011.5.25.172.1.4.1
Entries of hwOamMacDisplayTable.
Indexes
Column Syntax OID
hwOamMacDisplayIndex
The index of hwOamMacDisplayEntry, the value range is from 1 to 100.
Integer32
Constraints:
range: 1-100
 .1.3.6.1.4.1.2011.5.25.172.1.4.1.1
hwOamMacDisplayAddress
The OAM MAC that had been populated or purged.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.2011.5.25.172.1.4.1.2
hwOamMacDisplayType
The OAM MAC type, 1 means populate, 2 means purge.
MacOpType
Type Values:
1populate
2purge
 .1.3.6.1.4.1.2011.5.25.172.1.4.1.3
hwOamMacDisplayVsiName
The name or other identifier referring to the VSI
which is correlative to the hwOamMac.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.2011.5.25.172.1.4.1.4
hwOamMacDisplayAgeTime
The age time of the entry.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.172.1.4.1.5
hwOamMacDisplayLsrId
The LSR-ID of the sender.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.5.25.172.1.4.1.6

hwVpnCfgPingTable

table
.1.3.6.1.4.1.2011.5.25.172.2.1 · 1 row entry · 13 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwVpnCfgPingTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-VPN-DIAGNOSTICS-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-VPN-DIAGNOSTICS-MIB::hwVpnCfgPingTable' 
hwVpnCfgPingTable.
hwVpnCfgPingEntry row .1.3.6.1.4.1.2011.5.25.172.2.1.1
This object indicates that the index of this table is hwVpnCfgPingIndex.
Indexes
Column Syntax OID
hwVpnCfgPingIndex
This object indicates the index of an operation instance.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.2011.5.25.172.2.1.1.1
hwVpnCfgPingPeerIpType
This object indicates the type of the peer IP address. It is used to identify the value type of hwVpnCfgPingPeerIp, which can be IPv4 or IPv6.
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.2011.5.25.172.2.1.1.2
hwVpnCfgPingPeerIp
This object indicates the peer IP address.
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2011.5.25.172.2.1.1.3
hwVpnCfgPingVpnIdType
This object indicates the VPN ID type, that is, the type of hwVPNCFGPingVPNID. The VPN ID type can be VPLS, L3VPN, PWE3, or Martini VLL.
Enumerationr/w
Enumerated Values:
1martiniVPLS
2kompellaVPLS
3l3vpn
4pwe3
5martiniVLL
6bgpadVPLS
255unknown
 .1.3.6.1.4.1.2011.5.25.172.2.1.1.4
hwVpnCfgPingVpnId
This object indicates the VPN ID, expressed in a character string. The VPN ID is VSI-Name for VPLS, VPN-Instance for L3VPN, and invalid for PWE3 and Martini VLL.
OctetStringr/w .1.3.6.1.4.1.2011.5.25.172.2.1.1.5
hwVpnCfgPingPwId
This object indicates PW-ID. This value is set for the parameter only when the VPLS is in Martini mode. Otherwise, the value is 0.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.172.2.1.1.6
hwVpnCfgPingTunnelUsed
This object indicates the mode of forwarding request packets or response packets (such as tunnel forwarding).
Enumerationr/w
Enumerated Values:
1normal
2localOnly
3remoteOnly
4localAndRemote
 .1.3.6.1.4.1.2011.5.25.172.2.1.1.7
hwVpnCfgPingOperation
This object indicates two values: enable(1) and disable(2). enable(1) indicates that the operation instance is started; disable(2) indicates that the operation instance is stopped.
P-BRIDGE-MIBEnabledStatusr/w
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.2011.5.25.172.2.1.1.8
hwVpnCfgPingResultDetail
This object indicates the result detail of ping operation.
Enumeration
Enumerated Values:
1requestSentReplyRecieved
2requestSentReplyTimeout
3requestFailedReplyFailed
255noResult
 .1.3.6.1.4.1.2011.5.25.172.2.1.1.9
hwVpnCfgPingRowStatus
This object indicates the row status.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.5.25.172.2.1.1.10
hwVpnCfgPingSecondary
This object indicates the local secondary PW.
Enumerationr/w
Enumerated Values:
0primary
1secondary
255unknown
 .1.3.6.1.4.1.2011.5.25.172.2.1.1.11
hwVpnCfgPingIfName
This object indicates the name of the AC interface.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.2011.5.25.172.2.1.1.12
hwVpnCfgPingPwIdNew
This object indicates PW-ID. This value is set for the parameter only when the VPLS is in Martini mode. Otherwise, the value is 0.
Because hwVpnCfgPingPwId ranges from -2147483647 to +2147483647, failing to cover the ra…
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.172.2.1.1.13

hwVpnCfgPingResultTable

table
.1.3.6.1.4.1.2011.5.25.172.2.2 · 1 row entry · 22 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwVpnCfgPingResultTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-VPN-DIAGNOSTICS-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-VPN-DIAGNOSTICS-MIB::hwVpnCfgPingResultTable' 
hwVpnCfgPingResultTable.
hwVpnCfgPingResultEntry row .1.3.6.1.4.1.2011.5.25.172.2.2.1
This object indicates that indexes of this table are hwVpnCfgPingIndex and hwVpnCfgPingResultLocation.
Indexes
Column Syntax OID
hwVpnCfgPingResultLocation
This object indicates two values: local(1) and remote(2). local(1) indicates configurations of the local end displayed in the probe result. remote(2) indicates configurations of the peer end displayed in the probe resul…
Enumeration
Enumerated Values:
1local
2remote
 .1.3.6.1.4.1.2011.5.25.172.2.2.1.1
hwVpnCfgPingResultVpnIdType
This object indicates the VPN ID type, that is, the type of hwVPNCFGPingVPNID. The VPN ID type can be VPLS, L3VPN, PWE3, or Martini VLL.
Enumeration
Enumerated Values:
1martiniVPLS
2kompellaVPLS
3l3vpn
4pwe3
5martiniVLL
6bgpadVPLS
255unknown
 .1.3.6.1.4.1.2011.5.25.172.2.2.1.2
hwVpnCfgPingResultVpnId
This object indicates the VPN ID, expressed in a character string. The VPN ID is VSI-Name for VPLS, VPN-Instance for L3VPN, and invalid for PWE3 and Martini VLL.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.2011.5.25.172.2.2.1.3
hwVpnCfgPingResultDesc
This object indicates the description of the VPN.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.2011.5.25.172.2.2.1.4
hwVpnCfgPingResultVpnAdminStatus
This object indicates the management status of the VPN: up(1), down(2), and unknown(255).
Enumeration
Enumerated Values:
1up
2down
255unknown
 .1.3.6.1.4.1.2011.5.25.172.2.2.1.5
hwVpnCfgPingResultOperStatus
This object indicates the operation status of the VPN: up(1), down(2), and unknown(255).
Enumeration
Enumerated Values:
1up
2down
255unknown
 .1.3.6.1.4.1.2011.5.25.172.2.2.1.6
hwVpnCfgPingResultMtu
This object indicates the MTU value. The object represents the MTU value of the AC interface when the VPN type is PWE3 or Martini VLL, represents the MTU value of the VSI when the VPN type is VPLS. If the value of the o…
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.172.2.2.1.7
hwVpnCfgPingResultCeCount
This object indicates the number of CEs.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.172.2.2.1.8
hwVpnCfgPingResultActualIpType
This object indicates the type of the IP address of the PW on the local PE. It is used to identify the value type of hwVpnCfgPingResultActualIp.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.2011.5.25.172.2.2.1.9
hwVpnCfgPingResultActualIp
This object indicates the IP address of the PW on the local PE.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2011.5.25.172.2.2.1.10
hwVpnCfgPingResultPeerIpType
This object indicates the type of the IP address of the PW on the peer PE. It is used to identify the value type of hwVpnCfgPingResultPeerIP.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.2011.5.25.172.2.2.1.11
hwVpnCfgPingResultPeerIp
This object indicates the IP address of the PW on the peer PE.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2011.5.25.172.2.2.1.12
hwVpnCfgPingResultPwId
This object indicates PW-ID.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.172.2.2.1.13
hwVpnCfgPingResultPeType
This object indicates the type of the PE (Whether the PE is an SPE.)
Enumeration
Enumerated Values:
1upe
2spe
255unknown
 .1.3.6.1.4.1.2011.5.25.172.2.2.1.14
hwVpnCfgPingResultVcType
This object indicates the VC type.
HUAWEI-VPLS-EXT-MIBHWL2VpnVcEncapsType
Type Values:
1frameRelayDlciMartini
2atmAal5SduVccTransport
3atmTransparentCellTransport
4vlan
5ethernet
6hdlc
7ppp
8cem
9atmN2OneVccCellTransport
10atmN2OneVpcCellTransport
11ipLayer2Transport
12atmOne2OneVccCellMode
13atmOne2OneVpcCellMode
14atmAal5PduVccTransport
15frameRelayPortMode
16cep
17saE1oP
18saT1oP
19saE3oP
20saT3oP
21cESoPsnBasicMode
22tDMoIPbasicMode
23l2VpnCESoPSNTDMwithCAS
24l2VpnTDMoIPTDMwithCAS
25frameRelayDlci
64ipInterworking
255unknown
 .1.3.6.1.4.1.2011.5.25.172.2.2.1.15
hwVpnCfgPingResultLabelIn
This object indicates the incoming label of the interface at the PW side.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.172.2.2.1.16
hwVpnCfgPingResultLableOut
This object indicates the outgoing label of the interface at the PW side.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.172.2.2.1.17
hwVpnCfgPingResultControlWord
This object indicates whether the keyword control-word is configured.
Enumeration
Enumerated Values:
0disable
1enable
255unknown
 .1.3.6.1.4.1.2011.5.25.172.2.2.1.18
hwVpnCfgPingResultPriOrSec
This object indicates whether the local PW is a primary PW or a secondary PW.
Enumeration
Enumerated Values:
0primary
1secondary
255unknown
 .1.3.6.1.4.1.2011.5.25.172.2.2.1.19
hwVpnCfgPingResultVplsID
This object indicates the virtual private LAN service id.
OctetString .1.3.6.1.4.1.2011.5.25.172.2.2.1.20
hwVpnCfgPingResultRD
This object indicates the route distinguisher.
OctetString .1.3.6.1.4.1.2011.5.25.172.2.2.1.21
hwVpnCfgPingResultPwIdNew
This object indicates PW-ID. Because hwVpnCfgPingResultPwId ranges from -2147483647 to +2147483647, failing to cover the range from 2147483648 to 4294967295,
this object ranging from 0 to 4294967295 is therefore added.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.172.2.2.1.22

hwVpnCfgPingResultIRtTable

table
.1.3.6.1.4.1.2011.5.25.172.2.4 · 1 row entry · 2 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwVpnCfgPingResultIRtTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-VPN-DIAGNOSTICS-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-VPN-DIAGNOSTICS-MIB::hwVpnCfgPingResultIRtTable' 
hwVpnCfgPingResultIRtTable.
hwVpnCfgPingResultIRtEntry row .1.3.6.1.4.1.2011.5.25.172.2.4.1
This object indicates that indexes of this table are hwVpnCfgPingIndex and hwVpnCfgPingResultLocation.
Indexes
Column Syntax OID
hwVpnCfgPingResultIRtIndex
This object indicates the index of an import vpn target.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.172.2.4.1.1
hwVpnCfgPingResultIRt
This object indicates the import vpn target.
OctetString .1.3.6.1.4.1.2011.5.25.172.2.4.1.2

hwVpnCfgPingResultERtTable

table
.1.3.6.1.4.1.2011.5.25.172.2.5 · 1 row entry · 2 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwVpnCfgPingResultERtTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-VPN-DIAGNOSTICS-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-VPN-DIAGNOSTICS-MIB::hwVpnCfgPingResultERtTable' 
hwVpnCfgPingResultERtTable.
hwVpnCfgPingResultERtEntry row .1.3.6.1.4.1.2011.5.25.172.2.5.1
This object indicates that indexes of this table are hwVpnCfgPingIndex and hwVpnCfgPingResultLocation.
Indexes
Column Syntax OID
hwVpnCfgPingResultERtIndex
This object indicates the index of an export vpn target..
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.172.2.5.1.1
hwVpnCfgPingResultERtName
This object indicates the export vpn target.
OctetString .1.3.6.1.4.1.2011.5.25.172.2.5.1.2