HUAWEI-VOICEUSER-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
18
Rows
18
Columns
245

hwPstnCTPConfigTable

table
.1.3.6.1.4.1.2011.6.112.1.1 · 1 row entry · 30 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwPstnCTPConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-VOICEUSER-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-VOICEUSER-MIB::hwPstnCTPConfigTable' 
This table is used to add, delete, modify, and query the PSTN user. 
The index of this table is hwPstnCTPConfigIndex. 
The service attributes of a PSTN port include the gateway ID, terminal ID, telephone number, whether to support layering configuration, priority flag of the port for the overload control, user type, power-off interval, FSK delay interval, time for issuing the calling number, format for issuing the calling number, and limited pulse dialing. Through the table, you can configure, modify, and query the above-mentioned attributes of the PSTN user.
hwPstnCTPConfigEntry row .1.3.6.1.4.1.2011.6.112.1.1.1
This table is used to add, delete, modify, and query the PSTN user.
The index of this entry is hwPstnCTPConfigIndex.
The service attributes of a PSTN port include the gateway ID, terminal ID, telephone number, whether…
Indexes
Column Syntax OID
hwPstnCTPConfigIndex
Indicates the frame/slot/port.
24 0
0011000 | xxxxxxxx | xxxxxx | xxxxxxx | 0000
port frame slot port 0
type

The highest 7 bits indicate the typ…
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.112.1.1.1.1
hwPstnCTPMgId
Indicates the MG ID.
Integer32r/w
Constraints:
range: 0-16777215
 .1.3.6.1.4.1.2011.6.112.1.1.1.2
hwPstnCTPTerminationID
Indicates the terminal ID (only the character string of digit type is supported).
OctetStringr/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.2011.6.112.1.1.1.3
hwPstnCTPTelNo
Indicates the telephone number.
OctetStringr/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.2011.6.112.1.1.1.4
hwPstnCTPRowStatus
Indicates the row status.The operations include activate, shut down, not start, create and register, create and wait, and delete. The operations are not used in the V8R61.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.6.112.1.1.1.5
hwPstnCTPLayerFlag
Indicates whether to layer.
Options:
1. noLayer(1) -not to layer
2. layer(2) -to layer
3. null(-1) -invalid value
Enumeration
Enumerated Values:
-1null
1noLayer
2layer
 .1.3.6.1.4.1.2011.6.112.1.1.1.6
hwPstnCTPPriorityFlag
Indicates the priority of the terminal.
Options:
1. cat1(1) -the highest priority
2. cat2(2) -the middle priority
3. cat3(3) -the lowest priority
Enumerationr/w
Enumerated Values:
1cat1
2cat2
3cat3
 .1.3.6.1.4.1.2011.6.112.1.1.1.7
hwPstnCTPPotsLineType
Indicates the subscriber type.
Options:
1. del(1) -DEL
2. lcPBX(2) -Loop Calling PBX
3. ecPBX(3) -earth calling PBX
4. payPhone(4) -PayPhone
Enumerationr/w
Enumerated Values:
1del
2lcPBX
3ecPBX
4payPhone
 .1.3.6.1.4.1.2011.6.112.1.1.1.8
hwPstnCTPDCTime
Indicates the disconnect clear interval.
Unit: 10ms
Integer32r/w
Constraints:
range: 10-100
 .1.3.6.1.4.1.2011.6.112.1.1.1.9
hwPstnCTPFSKDelayInterval
Indicates the FSK delay interval.
Unit: 10ms
Integer32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.2011.6.112.1.1.1.10
hwPstnCTPCidTransWhen
Indicates the time for delivering the caller ID.
Options:
1. afterRing(1) -transmit CID after ringing
2. beforeRing(2) -transmit CID before ringing
Enumerationr/w
Enumerated Values:
1afterRing
2beforeRing
 .1.3.6.1.4.1.2011.6.112.1.1.1.11
hwPstnCTPCidFormat
Indicates the format of the caller ID.
Options:
1. sdmfFsk(1) -SDMF FSK format
2. mdmfFsk(2) -MDMF FSK format
3. dtmf(3) -DTMF format
4. russia(4) -russia format
5. etsi(5) -etsi format
Enumerationr/w
Enumerated Values:
1sdmfFsk
2mdmfFsk
3dtmf
4russia
5etsi
 .1.3.6.1.4.1.2011.6.112.1.1.1.12
hwPstnCTPVQEAgc
Indicates enable AGC or not.
Options:
1. enable(1) -enable AGC
2. disable(2) -disable AGC
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.2011.6.112.1.1.1.13
hwPstnCTPVQESns
Indicates enable SNS or not.
Options:
1. enable(1) -enable SNS
2. disable(2) -disable SNS
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.2011.6.112.1.1.1.14
hwPstnCTPVQEAgcLevel
Indicates set AGC target value.
Unit: dbm0
Integer32r/w
Constraints:
range: -24--9
 .1.3.6.1.4.1.2011.6.112.1.1.1.15
hwPstnCTPVQESnsLevel
Indicates set VQE noise suppression level.
Unit: db
Integer32r/w
Constraints:
range: 6-20
 .1.3.6.1.4.1.2011.6.112.1.1.1.16
hwPstnCTPDspInputGain
Dsp input gain.
1: -10db
2: -9db
3: -8db
4: -7db
5: -6db
6: -5db
7: -4db
8: -3db
9: -2db
10: -1db
11: 0db
12: 1db
13: 2db
14: 3db
15: 4db
16: 5db
Unit: db
Integer32r/w
Constraints:
range: 1-16
 .1.3.6.1.4.1.2011.6.112.1.1.1.17
hwPstnCTPDspOutputGain
Dsp output gain.
1: -10db
2: -9db
3: -8db
4: -7db
5: -6db
6: -5db
7: -4db
8: -3db
9: -2db
10: -1db
11: 0db
12: 1db
13: 2db
14: 3db
15: 4db
16: 5db
17: 6db
18: 7db
19:…
Integer32r/w
Constraints:
range: 1-21
 .1.3.6.1.4.1.2011.6.112.1.1.1.18
hwPstnCTPDetectANSbarBySingleToneFlag
It indicates whether the ANSbar signal detected by SingleTone is supported.
Options:
1. enable(1) -the ANSbar signal detected by SingleTone is supported
2. disable(2) -the ANSbar signal detected by SingleTone is not su…
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.2011.6.112.1.1.1.19
hwPstnCTPBellANSFlag
It indicates whether the Bell ANS is supported.
Options:
1. enable(1) -the Bell ANS is supported
2. disable(2) -the Bell ANS is not supported
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.2011.6.112.1.1.1.20
hwPstnCTPDspParaTemplate
The index of dsp parameter template name.
OctetStringr/w
Constraints:
range: 0-31
 .1.3.6.1.4.1.2011.6.112.1.1.1.21
hwPstnCTPCidFskMode
It indicates the mode of fsk.
Options:
1. bell202(1) -bell 202
2. ccittv23(2) -ccitt v23
3. ntt(3) -ntt
Enumerationr/w
Enumerated Values:
1bell202
2ccittv23
3ntt
 .1.3.6.1.4.1.2011.6.112.1.1.1.22
hwPstnCTPCidTasPattern
It indicates the mode of tas.
Options:
1. noTas(1) -no tas
2. dtAs(2) -DT as
Enumerationr/w
Enumerated Values:
1noTas
2dtAs
 .1.3.6.1.4.1.2011.6.112.1.1.1.23
hwPstnCTPUserGroupid
It indicates the user group ID.
-1 indicates clear the user group info.
Integer32r/w
Constraints:
range: -1-65535
 .1.3.6.1.4.1.2011.6.112.1.1.1.24
hwPstnCTPDigitMapGroupName
It indicates the digitmap group name.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.2011.6.112.1.1.1.25
hwPstnCTPForceSendFsk
Indicates enable force send FSK or not.
Options:
1. enable(1) -enable force send FSK
2. disable(2) -disable force send FSK
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.2011.6.112.1.1.1.26
hwPstnCTPFSKAlertInterval
It indicates fskend to alert Interval.
-1 indicate invalid value.
Unit: 10ms
Integer32r/w
Constraints:
range: -1-100
 .1.3.6.1.4.1.2011.6.112.1.1.1.27
hwPstnCTPConfigDefaultCli
It indicates the default cli number of outgoing call.
OctetStringr/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.2011.6.112.1.1.1.28
hwPstnCTPEOCTime
Indicates the end of call interval.
Unit: 10ms
Integer32r/w
Constraints:
range: 10-100
 .1.3.6.1.4.1.2011.6.112.1.1.1.29
hwPstnCTPRemoteBlockPowerDeny
Indicates the flag of remote block power deny.
Options:
1. enable(1) - enable remote block power deny
2. disable(2) - disable remote block power deny
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.2011.6.112.1.1.1.30

hwPstnCTPOperTable

table
.1.3.6.1.4.1.2011.6.112.1.2 · 1 row entry · 11 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwPstnCTPOperTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-VOICEUSER-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-VOICEUSER-MIB::hwPstnCTPOperTable' 
It is used to maintain PSTN ports with the VSP feature. 
The index of this table is hwPstnCTPOperIndex.
Through the table, you can query the states of PSTN ports, including the running status of the PSTN service, management status of the PSTN service, change time of the running status of the PSTN service, and change time of the management status of the PSTN service. 
Through the table, services on the PSTN port can be terminated, started, and the service status can be queried.
hwPstnCTPOperEntry row .1.3.6.1.4.1.2011.6.112.1.2.1
It is used to maintain PSTN ports with the VSP feature.
The index of this entry is hwPstnCTPOperIndex.
Through the table, you can query the states of PSTN ports, including the running status of the PSTN service, manage…
Indexes
Column Syntax OID
hwPstnCTPOperIndex
Indicates the frame/slot/port.
24 0
0011000 | xxxxxxxx | xxxxxx | xxxxxxx | 0000
port frame slot port 0
type

The highest 7 bits indicate the typ…
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.112.1.2.1.1
hwPstnCTPSrvState
Indicates the running status of the service layer of the PSTN port.
Options:
1. fault(1)-the port is fault
2. idle(2) -the user is idle
3. offHook(3) -the user off-hook
4. lock(4) -the user is locked
5. ring(5) -the us…
Enumeration
Enumerated Values:
1fault
2idle
3offHook
4lock
5ring
 .1.3.6.1.4.1.2011.6.112.1.2.1.2
hwPstnCTPAdminState
Indicates the administration status of the service layer of the PSTN port.
Options:
1. blockedLocally(1) -the service is blocked cause of the local reason
2. blockedRemotely(2) -the service is blocked cause of the remo…
Enumeration
Enumerated Values:
1blockedLocally
2blockedRemotely
3inService
4shuttingDown
5delayTest
 .1.3.6.1.4.1.2011.6.112.1.2.1.3
hwPstnCTPAdminOper
Indicates the maintenance operation of the service layer of the PSTN port.
Options:
1. endService(1) -stop service
2. startService(2) -start service
3. deferEndingService(3) -stop service gracefully
Enumerationr/w
Enumerated Values:
1endService
2startService
3deferEndingService
 .1.3.6.1.4.1.2011.6.112.1.2.1.4
hwPstnCTPSrvStateChange
Indicates the service running status changing time of the PSTN port.
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.112.1.2.1.5
hwPstnCTPAdminStateChange
Indicates the service administration status changing time of the PSTN port.
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.112.1.2.1.6
hwPstnCTPMaxCobTime
Length of waiting timer for pstn user defer end service.
0 is not allowed to set.
Default: 240
Unit: minute
Integer32r/w
Constraints:
range: 0-1440
 .1.3.6.1.4.1.2011.6.112.1.2.1.7
hwPstnCTPOnexpire
Indicates disposal mode when pstn user defer end service timeout.
Options:
1. force(1) -force user to end service when end-service timeout
2. cancel(2) -cancel end service when end-service timeout
Default: force(1)
Enumerationr/w
Enumerated Values:
1force
2cancel
 .1.3.6.1.4.1.2011.6.112.1.2.1.8
hwPstnCTPRegState
Indicates the register status of the PSTN port.
Options:
1.initializing(1) - the user has not send register request
2.registering(2) - the user has send register request and is waiting for response
3.failRegistered(…
Enumeration
Enumerated Values:
1initializing
2registering
3failRegistered
4unregistering
5active
6deactive
7invalidusertype
 .1.3.6.1.4.1.2011.6.112.1.2.1.9
hwPstnCTPCallState
Indicates the register status of the PSTN port.
Options:
1. idle(1)- there is no call on the user
2. offhook(2)- the user hung up
3. dialing(3)- the user is dialing
4.establishing(4)- the call is establishing
5.ringi…
Enumeration
Enumerated Values:
1idle
2offhook
3dialing
4establishing
5ringing
6ringback
7connecting
8connected
9hold
10disconnecting
11locked
12invalidusertype
 .1.3.6.1.4.1.2011.6.112.1.2.1.10
hwPstnCTPCallWaitState
Indicates the register status of the PSTN port.
Options:
1. disable(1)- the service is disable
2. idle(2)- the is no callwaiting services
3. secondaryRinging(3)- the second part is ringing
4. secondaryConnecting(4)- …
Enumeration
Enumerated Values:
1disable
2idle
3secondaryRinging
4secondaryConnecting
5secondaryConnected
6secondaryDisconnecting
7invalidusertype
 .1.3.6.1.4.1.2011.6.112.1.2.1.11

hwMgPortStatisticsInfoTable

table
.1.3.6.1.4.1.2011.6.112.1.3 · 1 row entry · 12 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwMgPortStatisticsInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-VOICEUSER-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-VOICEUSER-MIB::hwMgPortStatisticsInfoTable' 
This table is used to query the statistics of the MG service ports.
The index of this table is hwMgPortStatInfoIndex.
hwMgPortStatisticsInfoEntry row .1.3.6.1.4.1.2011.6.112.1.3.1
This table is used to query the statistics of the MG service ports.
The index of this entry is hwMgPortStatInfoIndex.
Indexes
Column Syntax OID
hwMgPortStatInfoIndex
Indicates the frame ID.
The GetNext (walk) operation is to collect the statistics of each specified shelf of the system.
In the Get operation, if hwMgPortStatIndex is all F, the operation is to collect the statistics of…
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.112.1.3.1.1
hwPstnCTPStatTotalNum
Indicates the total number of the MGPSTN service ports.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.112.1.3.1.2
hwPstnCTPStatFaultNum
Indicates the number of the MGPSTN faulty ports.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.112.1.3.1.3
hwPstnCTPStatIdleNum
Indicates the number of the MGPSTN idle ports.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.112.1.3.1.4
hwPstnCTPStatOffhookNum
Indicates the number of the MGPSTN off-hooked ports.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.112.1.3.1.5
hwPstnCTPStatParkingNum
Indicates the number of the MGPSTN locked ports.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.112.1.3.1.6
hwPstnCTPStatRingNum
Indicates the number of the MGPSTN ringing ports.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.112.1.3.1.7
hwMgPortStatInfoTotalNum
Indicates the total number of the MG service ports.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.112.1.3.1.8
hwMgPortStatInfoUseableNum
Indicates the number of the MG idle ports.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.112.1.3.1.9
hwMgPortStatInfoBusyNum
Indicates the number of the MG busy ports.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.112.1.3.1.10
hwMgPortStatInfoFaultNum
Indicates the number of the MG faulty ports.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.112.1.3.1.11
hwMgPortStatInfoForbiddenNum
Indicates the number of the MG blocked ports.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.112.1.3.1.12

hwBraCTPConfigTable

table
.1.3.6.1.4.1.2011.6.112.1.4 · 1 row entry · 25 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwBraCTPConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-VOICEUSER-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-VOICEUSER-MIB::hwBraCTPConfigTable' 
It is used to configure the service attributes of a BRA port. It is used to add, delete, modify, and query the ISDN user with the VoIP feature. 
The index of this table is hwBraCTPConfigIndex.
The attributes of an ISDN user with the VoIP feature include the gateway ID, terminal ID, IUA link group, interface ID, and telephone number. Through the table, you can configure, modify, and query the above-mentioned attributes of the BRA user.
hwBraCTPConfigEntry row .1.3.6.1.4.1.2011.6.112.1.4.1
It is used to configure the service attributes of a BRA port. It is used to add, delete, modify, and query the ISDN user with the VoIP feature.
The index of this entry is hwBraCTPConfigIndex.
The attributes of an ISDN …
Indexes
Column Syntax OID
hwBraCTPConfigIndex
Indicates the frame/slot/port.
25 0
0011001 | xxxxxxxx | xxxxxx | xxxxxxx | 0000
port frame slot port 0
type

The highest 7 bits indicate the ty…
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.112.1.4.1.1
hwBraCTPMgId
Indicates the MG ID.
Integer32r/w
Constraints:
range: 0-16777215
 .1.3.6.1.4.1.2011.6.112.1.4.1.2
hwBraCTPTerminationID
Indicates the start terminal ID (only the character string of digit type is supported).
OctetStringr/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.2011.6.112.1.4.1.3
hwBraCTPTelNo
Indicates the BRA telephone number.
OctetStringr/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.2011.6.112.1.4.1.4
hwBraCTPLinkSetNo
Indicates the link set to which the BRA terminal belongs (the value range depends on the product specifications).
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.112.1.4.1.5
hwBraCTPIuaIID
Indicates the interface ID of the BRA terminal.
-1 means this parameter is not used.
Integer32r/w
Constraints:
range: -1-65535
 .1.3.6.1.4.1.2011.6.112.1.4.1.6
hwBraCTPRowStatus
Indicates the row status.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.6.112.1.4.1.7
hwBraCTPPriorityFlag
Indicates the priority of the terminal.
Options:
1. cat1(1) -the highest priority
2. cat2(2) -the middle priority
3. cat3(3) -the lowest priority
Default: cat3(3)
Enumerationr/w
Enumerated Values:
1cat1
2cat2
3cat3
 .1.3.6.1.4.1.2011.6.112.1.4.1.8
hwBraCTPLayerFlag
Indicates whether to layer.
Options:
1. noLayer(1) -not to layer
2. layer(2) -to layer
3. null(-1) -invalid value
Enumeration
Enumerated Values:
-1null
1noLayer
2layer
 .1.3.6.1.4.1.2011.6.112.1.4.1.9
hwBraCTPUniErrReport
UNI fault report flag of bra user.
Options:
1. disable(1) -disable
2. enable(2) -enable
Default: disable(1)
Enumerationr/w
Enumerated Values:
1disable
2enable
 .1.3.6.1.4.1.2011.6.112.1.4.1.10
hwBraCTPAutoResumeLimit
Indicates auto resume times threshold of bra user.
Default: 20
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.2011.6.112.1.4.1.11
hwBraCTPIuaTextIID
Use the text to indicate the interface ID of the BRA terminal. Config area 0~65535. Display area 0~53.
OctetStringr/w
Constraints:
range: 0-53
 .1.3.6.1.4.1.2011.6.112.1.4.1.12
hwBraCTPPowerDialerSupport
Powerdialer support flag of bra user.
Options:
1. enable(1) -enable
2. disable(2) -disable
Default: enable(1)
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.2011.6.112.1.4.1.13
hwBraCTPUserGroupid
It indicates the user group ID.
-1 indicates clear the user group info.
Integer32r/w
Constraints:
range: -1-65535
 .1.3.6.1.4.1.2011.6.112.1.4.1.14
hwBraCTPDigitMapGroupName
It indicates the digitmap group name.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.2011.6.112.1.4.1.15
hwBraCTPConfigIncomingcallChangeName
It indicates the number change of incomging call name.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.2011.6.112.1.4.1.16
hwBraCTPConfigOutgoingcallChangeName
It indicates the number change of outgoing call name.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.2011.6.112.1.4.1.17
hwBraCTPConfigDefaultCli
It indicates the default cli number of outgoing call.
OctetStringr/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.2011.6.112.1.4.1.18
hwBraCTPConfigDefaultCliMode
Indicates the mode of cli number.
Options:
1. match(1) - match
2. overwrite(2) -overwrite
3. null(-1) -invalid value
Default: match(1)
Enumerationr/w
Enumerated Values:
-1null
1match
2overwrite
 .1.3.6.1.4.1.2011.6.112.1.4.1.19
hwBraCTPConfigBearCapability
Indicates the bearCapability of bra user.
Options:
1. speech(1) -speech
2. audio(2) -3.1k-audio
3. speechOraudio(3) -speech or 3.1k-audio
4. null(-1) -invalid value
Default: speechOraudio(3)
Enumerationr/w
Enumerated Values:
-1null
1speech
2audio
3speechOraudio
 .1.3.6.1.4.1.2011.6.112.1.4.1.20
hwBraCTPConfigCalledPartyNumType
Indicates the type of called party number.
Options:
1. unknown(1) -unknown
2. national(2) -national
3. auto(3) -auto
4. international(4) -international
5. subscriber(5) -subscriber
6. null(-1) -invalid val…
Enumerationr/w
Enumerated Values:
-1null
1unknown
2national
3auto
4international
5subscriber
 .1.3.6.1.4.1.2011.6.112.1.4.1.21
hwBraCTPConfigCalledPartyNumInternationalPrefixFlag
Indicates whether to add prefix on international number.
Options:
1. enable(1) -enable
2. disable(2) -disable
3. null(-1) -invalid value
Default: disable(2)
Enumerationr/w
Enumerated Values:
-1null
1enable
2disable
 .1.3.6.1.4.1.2011.6.112.1.4.1.22
hwBraCTPConfigCalledPartyNumNationalPrefixFlag
Indicates whether to add prefix on national number.
Options:
1. enable(1) -enable
2. disable(2) -disable
3. null(-1) -invalid value
Default: disable(2)
Enumerationr/w
Enumerated Values:
-1null
1enable
2disable
 .1.3.6.1.4.1.2011.6.112.1.4.1.23
hwBraCTPDspParaTemplate
Indicates the name of DSP parameter template.
OctetStringr/w
Constraints:
range: 0-31
 .1.3.6.1.4.1.2011.6.112.1.4.1.24
hwBraCTPConfigCliGroup
It indicates the cli-group name of outgoing call.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.2011.6.112.1.4.1.25

hwBraCTPOperTable

table
.1.3.6.1.4.1.2011.6.112.1.5 · 1 row entry · 15 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwBraCTPOperTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-VOICEUSER-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-VOICEUSER-MIB::hwBraCTPOperTable' 
It is used to perform operations on service attributes of a BRA port. Through this table, you can perform maintenance operations on an ISDN user with the VSP feature. 
The index of this table is hwBraCTPOperIndex.
Different from the MG PSTN port, a BRA port contains two B channels and occupies two terminal IDs; however, only one terminal ID needs to be configured and this ID must be an even number. Then, the terminal ID in odd is allocated to the BRA port by default. 
Through this table, you can query the running status of the BRA B1/B2 service, management status of the BRA B1/B2 service, status of the BRA D channel, change time of the running status of the BRA B1/B2 service, and change time of the management status of the BRA B1/B2 service. 
Through the table, services on the BRA port can be terminated, started, and the service status can be queried.
hwBraCTPOperEntry row .1.3.6.1.4.1.2011.6.112.1.5.1
It is used to perform operations on service attributes of a BRA port. Through this table, you can perform maintenance operations on an ISDN user with the VSP feature.
The index of this entry is hwBraCTPOperIndex.
Diffe…
Indexes
Column Syntax OID
hwBraCTPOperIndex
Indicates the frame/slot/port.
25 0
0011001 | xxxxxxxx | xxxxxx | xxxxxxx | 0000
port frame slot port 0
type

The highest 7 bits indicate the ty…
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.112.1.5.1.1
hwBraCTPB1SrvState
Indicates the running status of the service layer of the BRA B1 channel.
Options:
1. idle(1) -the user is idle
2. busy(2) -the user is busy
3. fault(3) -the port is fault
Enumeration
Enumerated Values:
1idle
2busy
3fault
 .1.3.6.1.4.1.2011.6.112.1.5.1.2
hwBraCTPB2SrvState
Indicates the running status of the service layer of the BRA B2 channel.
Options:
1. idle(1) -the user is idle
2. busy(2) -the user is busy
3. fault(3) -the port is fault
Enumeration
Enumerated Values:
1idle
2busy
3fault
 .1.3.6.1.4.1.2011.6.112.1.5.1.3
hwBraCTPB1AdminState
Indicates the administration status of the service layer of the BRA B1 channel.
Options:
1. blockedLocally(1) -the service is blocked cause of local reason
2. blockedRemotely(2) -the service is blocked cause of remote r…
Enumeration
Enumerated Values:
1blockedLocally
2blockedRemotely
3inService
4shuttingDown
 .1.3.6.1.4.1.2011.6.112.1.5.1.4
hwBraCTPB2AdminState
Indicates the administration status of the service layer of the BRA B2 channel.
Options:
1. blockedLocally(1) -the service is blocked cause of local reason
2. blockedRemotely(2) -the service is blocked cause of remote r…
Enumeration
Enumerated Values:
1blockedLocally
2blockedRemotely
3inService
4shuttingDown
 .1.3.6.1.4.1.2011.6.112.1.5.1.5
hwBraCTPAdminOper
Indicates the maintenance operation of the service layer of the BRA port.
Options:
1. endService(1) -stop service
2. startService(2) -start service
3. deferEndingService(3) -stop service gracefully
Enumerationr/w
Enumerated Values:
1endService
2startService
3deferEndingService
 .1.3.6.1.4.1.2011.6.112.1.5.1.6
hwBraCTPDState
Indicates the status of the BRA D channel.
Options:
1. established(1) -established
2. block(2) -blocked
3. notConstruct(3) -unestablished
4. teiAlloced(4) -TEI is alloced
5. teiNotAlloced(5) -TEI is not alloced
Enumeration
Enumerated Values:
1established
2block
3notConstruct
4teiAlloced
5teiNotAlloced
 .1.3.6.1.4.1.2011.6.112.1.5.1.7
hwBraCTPB1SrvStateChange
Indicates the service running status changing time of the BRA B1 channel.
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.112.1.5.1.8
hwBraCTPB2SrvStateChange
Indicates the service running status changing time of the BRA B2 channel.
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.112.1.5.1.9
hwBraCTPB1AdminStateChange
Indicates the service administration status changing time of the BRA B1 channel.
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.112.1.5.1.10
hwBraCTPB2AdminStateChange
Indicates the service administration status changing time of the BRA B2 channel.
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.112.1.5.1.11
hwBraCTPDStateChange
Indicates the status changing time of the BRA D channel.
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.112.1.5.1.12
hwBraCTPMaxCobTime
Indicates the length of waiting timer for bra user defer end service. 0 is not allowed to set.
Default:240
Unit: minute
Integer32r/w
Constraints:
range: 0-1440
 .1.3.6.1.4.1.2011.6.112.1.5.1.13
hwBraCTPOnexpire
Indicates the disposal mode when bra user defer end service timeout.
Options:
1. force(1) -force user to end service
2. cancel(2) -cancel user's end service
Default: force(1)
Enumerationr/w
Enumerated Values:
1force
2cancel
 .1.3.6.1.4.1.2011.6.112.1.5.1.14
hwBraCTPAutoResumeTimes
Indicates the auto resume times of bra user.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.2011.6.112.1.5.1.15

hwBraCTPStatisticsTable

table
.1.3.6.1.4.1.2011.6.112.1.6 · 1 row entry · 5 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwBraCTPStatisticsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-VOICEUSER-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-VOICEUSER-MIB::hwBraCTPStatisticsTable' 
This table is used to query the statistics of the MG-BRA service ports.
The index of this table is hwBraCTPStatIndex.
hwBraCTPStatisticsEntry row .1.3.6.1.4.1.2011.6.112.1.6.1
This table is used to query the statistics of the MG-BRA service ports.
The index of this entry is hwBraCTPStatIndex.
Indexes
Column Syntax OID
hwBraCTPStatIndex
Indicates the frame ID.
The GetNext (walk) operation is to collect the statistics of each specified shelf of the system.
In the Get operation, if hwMgPortStatIndex is all F, the operation is to collect the statistics of…
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.112.1.6.1.1
hwBraCTPStatTotalNum
Indicates the total number of the MGBRA service ports.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.112.1.6.1.2
hwBraCTPStatFaultNum
Indicates the number of faulty ports.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.112.1.6.1.3
hwBraCTPStatIdleNum
Indicates the number of idle ports.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.112.1.6.1.4
hwBraCTPStatBusyNum
Indicates the number of busy ports.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.112.1.6.1.5

hwPraCTPConfigTable

table
.1.3.6.1.4.1.2011.6.112.1.7 · 1 row entry · 26 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwPraCTPConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-VOICEUSER-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-VOICEUSER-MIB::hwPraCTPConfigTable' 
It is used to configure the service attributes of a PRA port. It is used to add, delete, modify, and query the PRA user with the VSP feature. 
The index of this table is the hwPraCTPConfigIndex.
The attributes of a PRA user with the VoIP feature include the gateway ID, start terminal ID, IUA link group, and interface ID. Through the table, you can configure, modify, and query the above-mentioned attributes of the PRA user.
hwPraCTPConfigEntry row .1.3.6.1.4.1.2011.6.112.1.7.1
It is used to configure the service attributes of a PRA port. It is used to add, delete, modify, and query the PRA user with the VSP feature.
The index of this entry is the hwPraCTPConfigIndex.
The attributes of a PRA …
Indexes
Column Syntax OID
hwPraCTPConfigIndex
Indicates the frame/slot/port.
22 0
0010110 | xxxxxxxx | xxxxxx | xxxxxxx | 0000
port frame slot port 0
type

The highest 7 bits indicate the ty…
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.112.1.7.1.1
hwPraCTPMgId
Indicates the MG ID.
Integer32r/w
Constraints:
range: 0-16777215
 .1.3.6.1.4.1.2011.6.112.1.7.1.2
hwPraCTPTerminationID
Indicates the start terminal ID (only the character string of digit type is supported).
OctetStringr/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.2011.6.112.1.7.1.3
hwPraCTPLinkSetNo
Indicates the link set to which the PRA terminal belongs (the value range depends on the product specifications).
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.112.1.7.1.4
hwPraCTPIuaIID
Indicates the interface ID of the PRA terminal.
-1 means this parameter is not used.
Integer32r/w
Constraints:
range: -1-65535
 .1.3.6.1.4.1.2011.6.112.1.7.1.5
hwPraCTPRowStatus
Indicates the row status.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.6.112.1.7.1.6
hwPraCTPLayerFlag
Indicates whether to layer.
Options:
1. noLayer(1) -not to layer
2. layer(2) -to layer
3. null(-1) -invalid value
Enumeration
Enumerated Values:
-1null
1noLayer
2layer
 .1.3.6.1.4.1.2011.6.112.1.7.1.7
hwPraCTPPriorityFlag
Indicates terminal priority.
Options:
1. cat1(1) -the highest priority
2. cat2(2) -the middle priority
3. cat3(3) -the lowest priority
Default: cat3(3)
Enumerationr/w
Enumerated Values:
1cat1
2cat2
3cat3
 .1.3.6.1.4.1.2011.6.112.1.7.1.8
hwPraCTPUniErrReport
Indicates UNI fault report flag of e1 port.
Options:
1. disable(1) -disable UNI fault report of e1 port
2. enable(2) -enable UNI fault report of e1 port
Default: disable(1)
Enumerationr/w
Enumerated Values:
1disable
2enable
 .1.3.6.1.4.1.2011.6.112.1.7.1.9
hwPraCTPSubChnMask
Indicates from left to right, each bit indicates enable one sub channel(0-31) or not, 0 means disable, 1 means enable, sub channel 0 and 16 must enable.
Default: 11111111111111111111111111111111
Bitsr/w
Enumerated Values:
0bchn0
1bchn1
2bchn2
3bchn3
4bchn4
5bchn5
6bchn6
7bchn7
8bchn8
9bchn9
10bchn10
11bchn11
12bchn12
13bchn13
14bchn14
15bchn15
16bchn16
17bchn17
18bchn18
19bchn19
20bchn20
21bchn21
22bchn22
23bchn23
24bchn24
25bchn25
26bchn26
27bchn27
28bchn28
29bchn29
30bchn30
31bchn31
 .1.3.6.1.4.1.2011.6.112.1.7.1.10
hwPraCTPTelNo
Indicates telphone number.
OctetStringr/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.2011.6.112.1.7.1.11
hwPraCTPAutoResumeLimit
Indicates auto resume times threshold of pra user.
Default: 20
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.2011.6.112.1.7.1.12
hwPraCTPIuaTextIID
Use the text to indicate the interface ID of the PRA terminal.
OctetStringr/w
Constraints:
range: 0-53
 .1.3.6.1.4.1.2011.6.112.1.7.1.13
hwPraCTPPowerDialerSupport
Powerdialer support flag of pra user.
Options:
1. enable(1) -support power dialer
2. disable(2) -not support power dialer
Default: enable(1)
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.2011.6.112.1.7.1.14
hwPraCTPUserGroupid
It indicates the user group ID.
-1 indicates clear the user group info.
Integer32r/w
Constraints:
range: -1-65535
 .1.3.6.1.4.1.2011.6.112.1.7.1.15
hwPraCTPDigitMapGroupName
It indicates the digitmap group name.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.2011.6.112.1.7.1.16
hwPraCTPConfigIncomingcallChangeName
It indicates the number change name of incoming call.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.2011.6.112.1.7.1.17
hwPraCTPConfigOutgoingcallChangeName
It indicates the number change name of outgoing call.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.2011.6.112.1.7.1.18
hwPraCTPConfigDefaultCli
It indicates the default cli number of outgoing call.
OctetStringr/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.2011.6.112.1.7.1.19
hwPraCTPConfigDefaultCliMode
Indicates the mode of cli number.
Options:
1. match(1) -match
2. overwrite(2) -overwrite
3. null(0) -invalid value
Default: match(1)
Enumerationr/w
Enumerated Values:
0null
1match
2overwrite
 .1.3.6.1.4.1.2011.6.112.1.7.1.20
hwPraCTPConfigBearCapability
Indicates the bearCapability of pra user.
Options:
1. speech(1) -speech
2. audio(2) -3.1k-audio
3. speechOraudio(3) -speech or 3.1k-audio
4. null(0) -invalid value
Default: speech…
Enumerationr/w
Enumerated Values:
0null
1speech
2audio
3speechOraudio
 .1.3.6.1.4.1.2011.6.112.1.7.1.21
hwPraCTPConfigCalledPartyNumType
Indicates the type of called party number.
Options:
1. unknown(1) -unknown
2. national(2) -national
3. auto(3) -auto
4. international(4) -international
5. subscriber(5) -subscriber
6. nul…
Enumerationr/w
Enumerated Values:
0null
1unknown
2national
3auto
4international
5subscriber
 .1.3.6.1.4.1.2011.6.112.1.7.1.22
hwPraCTPConfigCalledPartyNumInternationalPrefixFlag
Indicates whether to add prefix on international number.
Options:
1. enable(1) -enable
2. disable(2) -disable
3. null(0) -invalid value
Default: disable(2)
Enumerationr/w
Enumerated Values:
0null
1enable
2disable
 .1.3.6.1.4.1.2011.6.112.1.7.1.23
hwPraCTPConfigCalledPartyNumNationalPrefixFlag
Indicates whether to add prefix on national number.
Options:
1. enable(1) -enable
2. disable(2) -disable
3. null(0) -invalid value
Default: disable(2)
Enumerationr/w
Enumerated Values:
0null
1enable
2disable
 .1.3.6.1.4.1.2011.6.112.1.7.1.24
hwPraCTPConfigCliGroup
It indicates the cli-group name of outgoing call.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.2011.6.112.1.7.1.25
hwPraCTPBChnCallRight
Indicates the B channel's incoming and outgoing call permissions.
Indicates the permissions of B channels 0-31 from left to right.
Meaning of a single byte:
0: indicates that the B channel does not have the outgoing…
OctetStringr/w
Constraints:
range: 32-32
 .1.3.6.1.4.1.2011.6.112.1.7.1.26

hwPraCTPOperTable

table
.1.3.6.1.4.1.2011.6.112.1.8 · 1 row entry · 8 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwPraCTPOperTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-VOICEUSER-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-VOICEUSER-MIB::hwPraCTPOperTable' 
It is used to perform operations on service attributes of a PRA port. Through this table, you can perform maintenance operations on a PRA user with the VSP feature. 
The index of this table is hwPraCTPOperIndex.
Through this table, you can query the running status of 32 B channels of the PRA service, management status of 32 B channels of the PRA service, and status of the PRA D channel.
Through the table, services on the PRA port can be terminated, started, and the service status can be queried.
hwPraCTPOperEntry row .1.3.6.1.4.1.2011.6.112.1.8.1
It is used to perform operations on service attributes of a PRA port. Through this table, you can perform maintenance operations on a PRA user with the VSP feature.
The index of this entry is hwPraCTPOperIndex.
Through…
Indexes
Column Syntax OID
hwPraCTPOperIndex
Indicates the frame/slot/port.
22 0
0010110 | xxxxxxxx | xxxxxx | xxxxxxx | 0000
port frame slot port 0
type

The highest 7 bits indicate the ty…
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.112.1.8.1.1
hwPraCTPBchnSrvState
Indicates the running status of the service layer of the 32 B channels of the PRA. Each character corresponds to a timeslot. The value of the character is as follows: 1-Idle; 2-Busy; 3-Faulty; 4-Unavailable.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.2011.6.112.1.8.1.2
hwPraCTPBchnAdminState
Indicates the administration status of the service layer of the 32 B channels of the PRA. Each character corresponds to a timeslot. The value of the character is as follows: 1-blocked-locally; 2-blocked-remotely; 3-in-s…
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.2011.6.112.1.8.1.3
hwPraCTPAdminOper
Indicates the service operation.
Options:
1. endService(1) -stop service
2. startService(2) -start service
3. deferEndingService(3) -stop service gracefully
Enumerationr/w
Enumerated Values:
1endService
2startService
3deferEndingService
 .1.3.6.1.4.1.2011.6.112.1.8.1.4
hwPraCTPDState
Indicates the status of the PRA D channel.
Options:
1. established(1) -established
2. block(2) -blocked
3. notConstruct(3) -unestablished
Enumeration
Enumerated Values:
1established
2block
3notConstruct
 .1.3.6.1.4.1.2011.6.112.1.8.1.5
hwPraCTPMaxCobTime
Indicates length of waiting timer for pra user defer end service.
0 is not allowed to set.
Default: 240
Unit: minute
Integer32r/w
Constraints:
range: 0-1440
 .1.3.6.1.4.1.2011.6.112.1.8.1.6
hwPraCTPOnexpire
Indicates disposal mode when pra user defer end service timeout.
Options:
1. force(1) -force end service
2. cancel(2) -cancel end service
Default: force(1)
Enumerationr/w
Enumerated Values:
1force
2cancel
 .1.3.6.1.4.1.2011.6.112.1.8.1.7
hwPraCTPAutoResumeTimes
Indicates auto resume times of pra user.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.2011.6.112.1.8.1.8

hwPortStateTraceOperTable

table
.1.3.6.1.4.1.2011.6.112.1.9 · 1 row entry · 3 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwPortStateTraceOperTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-VOICEUSER-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-VOICEUSER-MIB::hwPortStateTraceOperTable' 
It is used to trace port status. 
The index of this table is hwPortStateTraceFrameId. 
This table traces states of the MG PSTN ports and MG BRA ports in real time, which contains trace start, trace end, and handshake operations.
hwPortStateTraceOperEntry row .1.3.6.1.4.1.2011.6.112.1.9.1
It is used to trace port status.
The index of this entry is hwPortStateTraceFrameId.
This table traces states of the MG PSTN ports and MG BRA ports in real time, which contains trace start, trace end, and handshake op…
Indexes
Column Syntax OID
hwPortStateTraceOperFrameId
Indicates the frame ID.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.112.1.9.1.1
hwPortStateTraceOperType
Indicates the operation type.
Options:
1. stop(1) -stop tracing
2. start(2) -start tracing
3. handshake(3) -handshake
Enumerationr/w
Enumerated Values:
1stop
2start
3handshake
 .1.3.6.1.4.1.2011.6.112.1.9.1.2
hwPortStateTraceOperReportType
Indicates the report type (adopting the bit table):
Bit0: indicates to report the running status change of the physical layer.
Bit1: indicates to report the administration status change of the physical layer.
Bit2: indi…
Integer32r/w
Constraints:
range: 0-15
 .1.3.6.1.4.1.2011.6.112.1.9.1.3

hwPmbsCTPConfigTable

table
.1.3.6.1.4.1.2011.6.112.1.11 · 1 row entry · 5 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwPmbsCTPConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-VOICEUSER-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-VOICEUSER-MIB::hwPmbsCTPConfigTable' 
This table is used to config PMBS user.
The index of this table is hwPmbsCTPConfigIndex.
hwPmbsCTPConfigEntry row .1.3.6.1.4.1.2011.6.112.1.11.1
This table is used to config PMBS user.
The index of this entry is hwPmbsCTPConfigIndex.
Indexes
Column Syntax OID
hwPmbsCTPConfigIndex
Indicates the frame/slot/port.

The PMBS user must be configurated on BRA port.

25 0
0011001 | xxxxxxxx | xxxxxx | xxxxxxx | 0000
port frame …
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.112.1.11.1.1
hwPmbsCTPLinkSetNo
IUA LinkSetNo.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.112.1.11.1.2
hwPmbsCTPluaIID
IUA Interface ID.
Integer32r/w
Constraints:
range: -1-65535
 .1.3.6.1.4.1.2011.6.112.1.11.1.3
hwPmbsCTPRowStatus
Row status.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.6.112.1.11.1.4
hwPmbsCTPIuaTextIID
Use the text to indicate the interface ID of the PMBS terminal.
OctetStringr/w
Constraints:
range: 0-53
 .1.3.6.1.4.1.2011.6.112.1.11.1.5

hwPmbsCTPOperTable

table
.1.3.6.1.4.1.2011.6.112.1.12 · 1 row entry · 2 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwPmbsCTPOperTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-VOICEUSER-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-VOICEUSER-MIB::hwPmbsCTPOperTable' 
This table is used to operate the PMBS user.
The index of this table is hwPmbsCTPOperIndex.
hwPmbsCTPOperEntry row .1.3.6.1.4.1.2011.6.112.1.12.1
This table is used to operate the PMBS user.
The index of this entry is hwPmbsCTPOperIndex.
Indexes
Column Syntax OID
hwPmbsCTPOperIndex
Indicates the frame/slot/port.
25 0
0011001 | xxxxxxxx | xxxxxx | xxxxxxx | 0000
port frame slot port 0
type

The highest 7 bits indicate the typ…
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.112.1.12.1.1
hwPmbsCTPPLinkState
Indicates from left to right, each bit indicates plink status of one TEI(0-62) or not, 0 means plink not established, 1 means plink established.
Bits
Enumerated Values:
0tei1
1tei2
2tei3
3tei4
4tei5
5tei6
6tei7
7tei8
8tei9
9tei10
10tei11
11tei12
12tei13
13tei14
14tei15
15tei16
16tei17
17tei18
18tei19
19tei20
20tei21
21tei22
22tei23
23tei24
24tei25
25tei26
26tei27
27tei28
28tei29
29tei30
30tei31
31tei32
32tei33
33tei34
34tei35
35tei36
36tei37
37tei38
38tei39
39tei40
40tei41
41tei42
42tei43
43tei44
44tei45
45tei46
46tei47
47tei48
48tei49
49tei50
50tei51
51tei52
52tei53
53tei54
54tei55
55tei56
56tei57
57tei58
58tei59
59tei60
60tei61
61tei62
62tei63
 .1.3.6.1.4.1.2011.6.112.1.12.1.2

hwPstnCTPRightConfigTable

table
.1.3.6.1.4.1.2011.6.112.1.13 · 1 row entry · 42 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwPstnCTPRightConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-VOICEUSER-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-VOICEUSER-MIB::hwPstnCTPRightConfigTable' 
This table is used to config PSTN user's right and servicedata.
The indexes of this table are hwPstnCTPRightConfigIndex, hwPstnCTPRightPortBindIndex.
hwPstnCTPRightConfigEntry row .1.3.6.1.4.1.2011.6.112.1.13.1
This table is used to config PSTN user's right and servicedata.
The indexes of this entry are hwPstnCTPRightConfigIndex, hwPstnCTPRightPortBindIndex.
Indexes
Column Syntax OID
hwPstnCTPRightConfigIndex
Indicates the frame/slot/port.
31 0
0011000 | xxxxxxxx | xxxxxx | xxxxxxx | 0000
port frame slot port 0
type

The highest 7 bits indicate the typ…
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.112.1.13.1.1
hwPstnCTPRightPortBindIndex
Indicates the telephone number index.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2011.6.112.1.13.1.2
hwPstnCTPRightCallHold
Indicates the right flag of callhold.
Options:
1. disable(1) -disable
2. enable(2) -enable
Enumerationr/w
Enumerated Values:
1disable
2enable
 .1.3.6.1.4.1.2011.6.112.1.13.1.3
hwPstnCTPRightThreeParty
Indicates the right flag of three-party.
Options:
1. disable(1) -disable
2. enable(2) -enable
Enumerationr/w
Enumerated Values:
1disable
2enable
 .1.3.6.1.4.1.2011.6.112.1.13.1.4
hwPstnCTPRightConf
Indicates the right flag of conf.
Options:
1. disable(1) -disable
2. enable(2) -enable
Enumerationr/w
Enumerated Values:
1disable
2enable
 .1.3.6.1.4.1.2011.6.112.1.13.1.5
hwPstnCTPRightCt
Indicates the right flag of ct.
Options:
1. disable(1) -disable
2. enable(2) -enable
Enumerationr/w
Enumerated Values:
1disable
2enable
 .1.3.6.1.4.1.2011.6.112.1.13.1.6
hwPstnCTPRightCw
Indicates the right flag of cw.
Options:
1. disable(1) -disable
2. enable(2) -enable
Enumerationr/w
Enumerated Values:
1disable
2enable
 .1.3.6.1.4.1.2011.6.112.1.13.1.7
hwPstnCTPRightMcid
Indicates the right flag of mcid.
Options:
1. disable(1) -disable
2. enable(2) -enable
Enumerationr/w
Enumerated Values:
1disable
2enable
 .1.3.6.1.4.1.2011.6.112.1.13.1.8
hwPstnCTPRightMwi
Indicates the right flag of mwi.
Options:
1. disable(1) -disable
2. enable(2) -enable
Enumerationr/w
Enumerated Values:
1disable
2enable
 .1.3.6.1.4.1.2011.6.112.1.13.1.9
hwPstnCTPRightTpobsolete
Indicates the right flag of tp.
Options:
1. disable(1) -disable
2. enable(2) -enable
Enumerationr/w
Enumerated Values:
1disable
2enable
 .1.3.6.1.4.1.2011.6.112.1.13.1.10
hwPstnCTPRightCdobsolete
Indicates the right flag of cd.
Options:
1. disable(1) -disable
2. enable(2) -enable
Enumerationr/w
Enumerated Values:
1disable
2enable
 .1.3.6.1.4.1.2011.6.112.1.13.1.11
hwPstnCTPRightUus1obsolete
Indicates the right flag of uus1.
Options:
1. disable(1) -disable
2. enable(2) -enable
Enumerationr/w
Enumerated Values:
1disable
2enable
 .1.3.6.1.4.1.2011.6.112.1.13.1.12
hwPstnCTPRightUus2obsolete
Indicates the right flag of uus2.
Options:
1. disable(1) -disable
2. enable(2) -enable
Enumerationr/w
Enumerated Values:
1disable
2enable
 .1.3.6.1.4.1.2011.6.112.1.13.1.13
hwPstnCTPRightUus3obsolete
Indicates the right flag of uus3.
Options:
1. disable(1) -disable
2. enable(2) -enable
Enumerationr/w
Enumerated Values:
1disable
2enable
 .1.3.6.1.4.1.2011.6.112.1.13.1.14
hwPstnCTPRightCentrexNo
It is used to set centrex NO. of SipPstnUser, 4294967295 means to clear the configuration.
Unsigned32r/w
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.2011.6.112.1.13.1.15
hwPstnCTPRightCentrexPrefix
Indicates the CentrexPrefix of SipPstnUser.
OctetStringr/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.2011.6.112.1.13.1.16
hwPstnCTPRightCentrexFlag
Indicates the CentrexFlag of SipPstnUser.
Options:
1. dialDirectly(1) -dial directly
2. dialSecondary(2) -dial secondary
Enumerationr/w
Enumerated Values:
1dialDirectly
2dialSecondary
 .1.3.6.1.4.1.2011.6.112.1.13.1.17
hwPstnCTPRightMwiMode
Indicates the MwiMode of SipPstnUser.
Options:
1. deferred(1) -deferred
2. immediate(2) -immediate
3. combine(3) -combine
Enumerationr/w
Enumerated Values:
1deferred
2immediate
3combine
 .1.3.6.1.4.1.2011.6.112.1.13.1.18
hwPstnCTPRightHotTime
Indicates the HotTime of SipPstnUser.
Unit: second
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.2011.6.112.1.13.1.19
hwPstnCTPRightHotLineNum
Indicates the HotLineNum of SipPstnUser, the length of hotlinenum mustn't exceed 64.
OctetStringr/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.2011.6.112.1.13.1.20
hwPstnCTPRightDialTone
Indicates the DialTone of SipPstnUser.
Options:
1. normal(1) -normal tone
2. special(2) -special tone
3. mw(3) -message waiting tone
4. stutter(4) -stutter tone
Enumerationr/w
Enumerated Values:
1normal
2special
3mw
4stutter
 .1.3.6.1.4.1.2011.6.112.1.13.1.21
hwPstnCTPRightCfbNum
Indicates the CfbNum of SipPstnUser.
OctetStringr/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.2011.6.112.1.13.1.22
hwPstnCTPRightCfnrNum
Indicates the CfnrNum of SipPstnUser.
OctetStringr/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.2011.6.112.1.13.1.23
hwPstnCTPRightCfuNum
Indicates the CfuNum of SipPstnUser.
OctetStringr/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.2011.6.112.1.13.1.24
hwPstnCTPRightCfnrTime
Indicates the CfnrTime of SipPstnUser.
Unit: second
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2011.6.112.1.13.1.25
hwPstnCTPRightAnonymousCall
Indicates the right flag of anonymous-call.
Options:
1. disable(1) -disable anonymous-call
2. enable(2) -enable anonymous-call
Enumerationr/w
Enumerated Values:
1disable
2enable
 .1.3.6.1.4.1.2011.6.112.1.13.1.26
hwPstnCTPRightAuthName
Indicates the authorization username of sippstnuser.
The character set is unrestricted.
OctetStringr/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.2011.6.112.1.13.1.27
hwPstnCTPRightAuthPassword
Indicates the authorization password of sippstnuser.
The character set is unrestricted.
OctetStringr/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.2011.6.112.1.13.1.28
hwPstnCTPRightEndConfigIndex
Indicates the end shelf/slot/port.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.112.1.13.1.29
hwPstnCTPRightAuthPasswordMode
Indicates the authorization mode of the password for sippstnuser.
Options:
1. password(1) -authorized by password
2. ha1(2) --authorized by ha1
Enumerationr/w
Enumerated Values:
1password
2ha1
 .1.3.6.1.4.1.2011.6.112.1.13.1.30
hwPstnCTPRightAuthHA1
Indicates the authorization HA1 value of sippstnuser.
The character set is unrestricted.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.2011.6.112.1.13.1.31
hwPstnCTPRightAutoReversePolarity
Indicates the right flag of auto reverse polarity.
Options:
1. disable(1) -disable
2. enable(2) -enable
Enumerationr/w
Enumerated Values:
1disable
2enable
 .1.3.6.1.4.1.2011.6.112.1.13.1.32
hwPstnCTPRightDisplayNameMode
Indicates the right flag of display name mode.
Options:
1. disable(1) -disable
2. enable(2) -enable
Enumerationr/w
Enumerated Values:
1disable
2enable
 .1.3.6.1.4.1.2011.6.112.1.13.1.33
hwPstnCTPRightDisplayName
Indicates the display name string.
OctetStringr/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.2011.6.112.1.13.1.34
hwPstnCTPRightHotLine
Indicates the right flag of hotline.
Options:
1. disable(1) -disable
2. enable(2) -enable
Enumerationr/w
Enumerated Values:
1disable
2enable
 .1.3.6.1.4.1.2011.6.112.1.13.1.35
hwPstnCTPRightPermanentHold
Indicates the right flag of permanent-hold.
Options:
1. disable(1) -disable
2. enable(2) -enable
Enumerationr/w
Enumerated Values:
1disable
2enable
 .1.3.6.1.4.1.2011.6.112.1.13.1.36
hwPstnCTPRightCutoffDisconnect
Indicates the right flag of cutoff-disconnect.
Options:
1. disable(1) -disable
2. enable(2) -enable
Enumerationr/w
Enumerated Values:
1disable
2enable
 .1.3.6.1.4.1.2011.6.112.1.13.1.37
hwPstnCTPRightSccClass
Indicates the right flag of SCC class service, for example call-park, call-pickup, EBO.
Options:
1. disable(1) -disable
2. enable(2) -enable
Enumerationr/w
Enumerated Values:
1disable
2enable
 .1.3.6.1.4.1.2011.6.112.1.13.1.38
hwPstnCTPRightPermanentHoldMode
Indicates the PermanentHoldMode of SipPstnUser.
Options:
1. norecall(1) - no recall
2. reminder(2) -reminder
3. recall(3) -recall
Enumerationr/w
Enumerated Values:
1norecall
2reminder
3recall
 .1.3.6.1.4.1.2011.6.112.1.13.1.39
hwPstnCTPRightPermanentHoldTime
Indicates the PermanentHoldTime of SipPstnUser.
Unit: second
Integer32r/w
Constraints:
range: 12-1023
 .1.3.6.1.4.1.2011.6.112.1.13.1.40
hwPstnCTPRightFastDisconnect
Indicates the right flag of fast-disconnect.
Options:
1. disable(1) -disable
2. enable(2) -enable
Enumerationr/w
Enumerated Values:
1disable
2enable
 .1.3.6.1.4.1.2011.6.112.1.13.1.41
hwPstnCTPRightDc
Indicates the right flag of dual communication.
Options:
1. disable(1) -disable
2. enable(2) -enable
Enumerationr/w
Enumerated Values:
1disable
2enable
 .1.3.6.1.4.1.2011.6.112.1.13.1.42

hwCTPExternNumberConfigTable

table
.1.3.6.1.4.1.2011.6.112.1.14 · 1 row entry · 5 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwCTPExternNumberConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-VOICEUSER-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-VOICEUSER-MIB::hwCTPExternNumberConfigTable' 
This table is used to config extern number of the PSTN or ISDN user.
The indexes of this table are hwCTPExternNumberConfigIndex, hwCTPExternNumberPortBindIndex.
hwCTPExternNumberConfigEntry row .1.3.6.1.4.1.2011.6.112.1.14.1
This table is used to config extern number of the PSTN or ISDN user.
The indexes of this entry are hwCTPExternNumberConfigIndex, hwCTPExternNumberPortBindIndex.
Indexes
Column Syntax OID
hwCTPExternNumberConfigIndex
Indicates the frame/slot/port.
31 0
xxxxxxx | xxxxxxxx | xxxxxx | xxxxxxx | 0000
port frame slot port 0
type

The highest 7 bits indicate the typ…
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.112.1.14.1.1
hwCTPExternNumberPortBindIndex
Indicates the extend number index.
If the value equal -1, then return the idle index of this shelf/slot/port.
Integer32
Constraints:
range: 1-65534
 .1.3.6.1.4.1.2011.6.112.1.14.1.2
hwCTPExternNumber
Indicates the extend number. - means to delete this extern number.
OctetStringr/w
Constraints:
range: 1-64
 .1.3.6.1.4.1.2011.6.112.1.14.1.3
hwCTPExternRowStatus
RowStatus
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.6.112.1.14.1.4
hwCTPExternUserGroupid
It indicates the user group ID.
-1 indicates clear the user group info.
Integer32r/w
Constraints:
range: -1-65535
 .1.3.6.1.4.1.2011.6.112.1.14.1.5

hwBraCTPRightConfigTable

table
.1.3.6.1.4.1.2011.6.112.1.15 · 1 row entry · 19 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwBraCTPRightConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-VOICEUSER-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-VOICEUSER-MIB::hwBraCTPRightConfigTable' 
This table is used to config BRA user's right and servicedata.
The indexes of this table are hwBraCTPRightConfigIndex, hwBraCTPRightPortBindIndex.
hwBraCTPRightConfigEntry row .1.3.6.1.4.1.2011.6.112.1.15.1
This table is used to config BRA user's right and servicedata.
The indexes of this entry are hwBraCTPRightConfigIndex, hwBraCTPRightPortBindIndex.
Indexes
Column Syntax OID
hwBraCTPRightConfigIndex
Indicates the frame/slot/port.
31 0
0011001 | xxxxxxxx | xxxxxx | xxxxxxx | 0000
port frame slot port 0
type

The highest 7 bits indicate the typ…
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.112.1.15.1.1
hwBraCTPRightPortBindIndex
Indicates the telephone number index.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2011.6.112.1.15.1.2
hwBraCTPRightAuthName
Indicates the authorization username of sipbrauser.
The character set is unrestricted.
OctetStringr/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.2011.6.112.1.15.1.3
hwBraCTPRightAuthPassword
Indicates the authorization password of sipbrauser.
The character set is unrestricted.
OctetStringr/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.2011.6.112.1.15.1.4
hwBraCTPRightEndConfigIndex
Indicates the end shelf/slot/port.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.112.1.15.1.5
hwBraCTPRightAuthPasswordMode
Indicates the authorization mode of the password for sipbrauser.
Options:
1. password(1) -authorized by password
2. ha1(2) -authorized by ha1
Enumerationr/w
Enumerated Values:
1password
2ha1
 .1.3.6.1.4.1.2011.6.112.1.15.1.6
hwBraCTPRightAuthHA1
Indicates the authorization HA1 value of sipbrauser.
The character set is unrestricted.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.2011.6.112.1.15.1.7
hwBraCTPRightCentrexNo
It is used to set centrex NO. of SipBraUser, 4294967295 means to clear the configuration.
Unsigned32r/w
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.2011.6.112.1.15.1.8
hwBraCTPRightCentrexPrefix
Indicates the CentrexPrefix of SipBraUser.
OctetStringr/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.2011.6.112.1.15.1.9
hwBraCTPRightCentrexFlag
Indicates the CentrexFlag of SipBraUser.
Options:
1. dialDirectly(1) -dial directly
2. dialSecondary(2) -dial secondary
Enumerationr/w
Enumerated Values:
1dialDirectly
2dialSecondary
 .1.3.6.1.4.1.2011.6.112.1.15.1.10
hwBraCTPRightMwiMode
Indicates the MwiMode of SipBraUser.
Options:
1. deferred(1) -deferred
2. immediate(2) -immediate
3. combine(3) -combine
Enumerationr/w
Enumerated Values:
1deferred
2immediate
3combine
 .1.3.6.1.4.1.2011.6.112.1.15.1.11
hwBraCTPRightCallHold
Indicates the right flag of callhold.
Options:
1. disable(1) -disable
2. enable(2) -enable
Enumerationr/w
Enumerated Values:
1disable
2enable
 .1.3.6.1.4.1.2011.6.112.1.15.1.12
hwBraCTPRightThreeParty
Indicates the right flag of three-party.
Options:
1. disable(1) -disable
2. enable(2) -enable
Enumerationr/w
Enumerated Values:
1disable
2enable
 .1.3.6.1.4.1.2011.6.112.1.15.1.13
hwBraCTPRightConf
Indicates the right flag of conf.
Options:
1. disable(1) -disable
2. enable(2) -enable
Enumerationr/w
Enumerated Values:
1disable
2enable
 .1.3.6.1.4.1.2011.6.112.1.15.1.14
hwBraCTPRightCt
Indicates the right flag of ct.
Options:
1. disable(1) -disable
2. enable(2) -enable
Enumerationr/w
Enumerated Values:
1disable
2enable
 .1.3.6.1.4.1.2011.6.112.1.15.1.15
hwBraCTPRightCw
Indicates the right flag of cw.
Options:
1. disable(1) -disable
2. enable(2) -enable
Enumerationr/w
Enumerated Values:
1disable
2enable
 .1.3.6.1.4.1.2011.6.112.1.15.1.16
hwBraCTPRightMcid
Indicates the right flag of mcid.
Options:
1. disable(1) -disable
2. enable(2) -enable
Enumerationr/w
Enumerated Values:
1disable
2enable
 .1.3.6.1.4.1.2011.6.112.1.15.1.17
hwBraCTPRightMwi
Indicates the right flag of mwi.
Options:
1. disable(1) -disable
2. enable(2) -enable
Enumerationr/w
Enumerated Values:
1disable
2enable
 .1.3.6.1.4.1.2011.6.112.1.15.1.18
hwBraCTPRightCliWildcardLen
Indicates the wildcard length of CLI number. 255 means to clear the configuration.
Integer32r/w
Constraints:
range: 0-64
range: 255-255
 .1.3.6.1.4.1.2011.6.112.1.15.1.19

hwPraCTPRightConfigTable

table
.1.3.6.1.4.1.2011.6.112.1.16 · 1 row entry · 12 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwPraCTPRightConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-VOICEUSER-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-VOICEUSER-MIB::hwPraCTPRightConfigTable' 
This table is used to config PRA user's servicedata.
The indexes of this table are hwPraCTPRightConfigIndex, hwPraCTPRightPortBindIndex.
hwPraCTPRightConfigEntry row .1.3.6.1.4.1.2011.6.112.1.16.1
This table is used to config PRA user's servicedata.
The indexes of this entry are hwPraCTPRightConfigIndex, hwPraCTPRightPortBindIndex.
Indexes
Column Syntax OID
hwPraCTPRightConfigIndex
Indicates the frame/slot/port.
31 0
0010110 | xxxxxxxx | xxxxxx | xxxxxxx | 0000
port frame slot port 0
type

The highest 7 bits indicate the typ…
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.112.1.16.1.1
hwPraCTPRightPortBindIndex
Indicates the telephone number index.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2011.6.112.1.16.1.2
hwPraCTPRightAuthName
Indicates the authorization username of sipprauser.
The character set is unrestricted.
OctetStringr/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.2011.6.112.1.16.1.3
hwPraCTPRightAuthPassword
Indicates the authorization password of sipprauser.
The character set is unrestricted.
OctetStringr/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.2011.6.112.1.16.1.4
hwPraCTPRightEndConfigIndex
Indicates the end shelf/slot/port.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.112.1.16.1.5
hwPraCTPRightAuthPasswordMode
Indicates the authorization mode of the password for sipprauser.
Options:
1. password(1) -authorized by password
2. ha1(2) -authorized by ha1
Enumerationr/w
Enumerated Values:
1password
2ha1
 .1.3.6.1.4.1.2011.6.112.1.16.1.6
hwPraCTPRightAuthHA1
Indicates the authorization HA1 value of sipprauser.
The character set is unrestricted.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.2011.6.112.1.16.1.7
hwPraCTPRightCentrexNo
It is used to set centrex NO. of SipPraUser, 4294967295 means to clear the configuration.
Unsigned32r/w
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.2011.6.112.1.16.1.8
hwPraCTPRightCentrexPrefix
Indicates the CentrexPrefix of SipPraUser.
OctetStringr/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.2011.6.112.1.16.1.9
hwPraCTPRightCentrexFlag
Indicates the CentrexFlag of SipPraUser.
Options:
1. dialDirectly(1) -dial directly
2. dialSecondary(2) -dial secondary
Enumerationr/w
Enumerated Values:
1dialDirectly
2dialSecondary
 .1.3.6.1.4.1.2011.6.112.1.16.1.10
hwPraCTPRightMwiMode
Indicates the MwiMode of SipPraUser.
Options:
1. deferred(1) -deferred
2. immediate(2) -immediate
3. combine(3) -combine
Enumerationr/w
Enumerated Values:
1deferred
2immediate
3combine
 .1.3.6.1.4.1.2011.6.112.1.16.1.11
hwPraCTPRightCliWildcardLen
Indicates the wildcard length of CLI number. 255 means to clear the configuration.
Integer32r/w
Constraints:
range: 0-64
range: 255-255
 .1.3.6.1.4.1.2011.6.112.1.16.1.12

hwR2CTPConfigTable

table
.1.3.6.1.4.1.2011.6.112.1.17 · 1 row entry · 13 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwR2CTPConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-VOICEUSER-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-VOICEUSER-MIB::hwR2CTPConfigTable' 
It is used to configure the service attributes of a R2 port. It is used to add, delete, modify, and query the R2 user with the VSP feature. 
The index of this table is the hwR2CTPConfigIndex.
The attributes of a R2 user with the VoIP feature include the gateway ID, terminal ID, R2 profile index. Through the table, you can configure, modify, and query the above-mentioned attributes of the R2 user.
hwR2CTPConfigEntry row .1.3.6.1.4.1.2011.6.112.1.17.1
It is used to configure the service attributes of a R2 port. It is used to add, delete, modify, and query the R2 user with the VSP feature.
The index of this entry is the hwR2CTPConfigIndex.
The attributes of a R2 user…
Indexes
Column Syntax OID
hwR2CTPConfigIndex
Indicates the frame/slot/port.
31 0
0010110 | xxxxxxxx | xxxxxx | xxxxxxx | 0000
port frame slot port 0
type

The highest 7 bits indicate the ty…
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.112.1.17.1.1
hwR2CTPMgId
Indicates the MG ID.
Integer32r/w
Constraints:
range: 0-16777215
 .1.3.6.1.4.1.2011.6.112.1.17.1.2
hwR2CTPTerminationID
Indicates the start terminal ID (only the character string of digit type is supported).
OctetStringr/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.2011.6.112.1.17.1.3
hwR2CTPSignalProfileIndex
Indicates the R2 signal profile index.
Integer32r/w
Constraints:
range: 0-15
 .1.3.6.1.4.1.2011.6.112.1.17.1.4
hwR2CTPSignalProfileName
Indicates the R2 signal profile name.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.2011.6.112.1.17.1.5
hwR2CTPRowStatus
Indicates the row status.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.6.112.1.17.1.6
hwR2CTPPriorityFlag
Indicates terminal priority.
Options:
1. cat1(1) -the highest priority
2. cat2(2) -the middle priority
3. cat3(3) -the lowest priority
Enumerationr/w
Enumerated Values:
1cat1
2cat2
3cat3
 .1.3.6.1.4.1.2011.6.112.1.17.1.7
hwR2CTPTelNo
Indicates telphone number.
OctetStringr/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.2011.6.112.1.17.1.8
hwR2CTPUserGroupid
It indicates the user group ID.
-1 indicates clear the user group info.
Integer32r/w
Constraints:
range: -1-65535
 .1.3.6.1.4.1.2011.6.112.1.17.1.9
hwR2CTPDigitMapGroupName
It indicates the digitmap group name.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.2011.6.112.1.17.1.10
hwR2CTPRemoteRingFlag
Indicates RemoteRing.
Options:
1. disable(1) -disable receive remote early media
2. enable(2) -enable receive remote early media
3. null(-1) -invalid value
Enumerationr/w
Enumerated Values:
-1null
1disable
2enable
 .1.3.6.1.4.1.2011.6.112.1.17.1.11
hwR2CTPConfigIncomingcallChangeName
It indicates the number change name of incoming call.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.2011.6.112.1.17.1.12
hwR2CTPConfigOutgoingcallChangeName
It indicates the number change name of outgoing call.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.2011.6.112.1.17.1.13

hwR2CTPOperTable

table
.1.3.6.1.4.1.2011.6.112.1.18 · 1 row entry · 6 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwR2CTPOperTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-VOICEUSER-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-VOICEUSER-MIB::hwR2CTPOperTable' 
It is used to perform operations on service attributes of a R2 user port. Through this table, you can perform maintenance operations on a R2 user with the VSP feature. 
The index of this table is hwR2CTPOperIndex.
Through this table, you can query the running status of 32 B channels of the R2 service, and management status of 32 B channels of the R2 service.
Through the table, services on the R2 port can be terminated, started, and the service status can be queried.
hwR2CTPOperEntry row .1.3.6.1.4.1.2011.6.112.1.18.1
It is used to perform operations on service attributes of a R2 user port. Through this table, you can perform maintenance operations on a R2 user with the VSP feature.
The index of this entry is hwR2CTPOperIndex.
Throu…
Indexes
Column Syntax OID
hwR2CTPOperIndex
Indicates the frame/slot/port.
31 0
0010110 | xxxxxxxx | xxxxxx | xxxxxxx | 0000
port frame slot port 0
type

The highest 7 bits indicate the ty…
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.112.1.18.1.1
hwR2CTPBchnSrvState
Indicates the running status of the service layer of the 32 B channels of the R2. Each character corresponds to a timeslot. The value of the character is as follows: 1-Idle; 2-Busy; 3-Faulty; 4-Unavailable.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.2011.6.112.1.18.1.2
hwR2CTPBchnAdminState
Indicates the administration status of the service layer of the 32 B channels of the R2. Each character corresponds to a timeslot. The value of the character is as follows:
1-blocked-locally; 2-blocked-remotely; 3-in-s…
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.2011.6.112.1.18.1.3
hwR2CTPAdminOper
Indicates the service operation.
Options:
1. endService(1) -stop service
2. startService(2) -start service
3. deferEndingService(3) -stop service gracefully
Enumerationr/w
Enumerated Values:
1endService
2startService
3deferEndingService
 .1.3.6.1.4.1.2011.6.112.1.18.1.4
hwR2CTPMaxCobTime
Indicates length of waiting timer for R2 user defer end service.
0 is not allowed to set.
Default: 240
Unit: minute
Integer32r/w
Constraints:
range: 0-1440
 .1.3.6.1.4.1.2011.6.112.1.18.1.5
hwR2CTPOnexpire
Indicates disposal mode when R2 user defer end service timeout.
Options:
1. force(1) -force end service
2. cancel(2) -cancel end service
Default: force(1)
Enumerationr/w
Enumerated Values:
1force
2cancel
 .1.3.6.1.4.1.2011.6.112.1.18.1.6

hwR2CTPRightConfigTable

table
.1.3.6.1.4.1.2011.6.112.1.19 · 1 row entry · 6 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwR2CTPRightConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-VOICEUSER-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-VOICEUSER-MIB::hwR2CTPRightConfigTable' 
This table is used to config R2 user's right.
The indexes of this table are hwR2CTPRightConfigIndex, hwR2CTPRightPortBindIndex.
hwR2CTPRightConfigEntry row .1.3.6.1.4.1.2011.6.112.1.19.1
This table is used to config R2 user's right.
The indexes of this entry are hwR2CTPRightConfigIndex, hwR2CTPRightPortBindIndex.
Indexes
Column Syntax OID
hwR2CTPRightConfigIndex
Indicates the frame/slot/port.
31 0
0011000 | xxxxxxxx | xxxxxx | xxxxxxx | 0000
port frame slot port 0
type

The highest 7 bits indicate the typ…
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.112.1.19.1.1
hwR2CTPRightPortBindIndex
Indicates the telephone number index.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2011.6.112.1.19.1.2
hwR2CTPRightAuthName
Indicates the authorization username of sipR2user.
The character set is unrestricted.
OctetStringr/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.2011.6.112.1.19.1.3
hwR2CTPRightAuthPassword
Indicates the authorization password of sipR2user.
The character set is unrestricted.
OctetStringr/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.2011.6.112.1.19.1.4
hwR2CTPRightAuthPasswordMode
Indicates the authorization mode of the password for sipR2user.
Options:
1. password(1) -authorized by password
2. ha1(2) -authorized by ha1
Enumerationr/w
Enumerated Values:
1password
2ha1
 .1.3.6.1.4.1.2011.6.112.1.19.1.5
hwR2CTPRightAuthHA1
Indicates the authorization HA1 value of sipR2user.
The character set is unrestricted.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.2011.6.112.1.19.1.6