HUAWEI-VOICEPORT-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
18
Rows
18
Columns
155

hwPstnPTPConfigTable

table
.1.3.6.1.4.1.2011.6.113.1.1 · 1 row entry · 30 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwPstnPTPConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-VOICEPORT-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-VOICEPORT-MIB::hwPstnPTPConfigTable' 
A list of hwPstnPTPConfigEntry objects.
The index of this table is hwPstnPTPIndex.
hwPstnPTPConfigEntry row .1.3.6.1.4.1.2011.6.113.1.1.1
A list of hwPstnPTPConfigEntry objects.
The index of this entry is hwPstnPTPIndex.
Indexes
Column Syntax OID
hwPstnPTPIndex
Indicates the shelf/slot/port index.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.113.1.1.1.1
hwPstnPTPSendVoiceGain
Indicates the transmit gain (dB).
1: 5 dB
2: 4.5 dB
3: 4 dB
4: 3.5 dB
5: 3 dB
6: 2.5 dB
7: 2 dB
8: 1.5 dB
9: 1 dB
10: 0.5 dB
11: 0 dB
12: -0.5 dB
13: -1 dB
14: -1.5 dB
15: -2 dB
16: -…
Integer32r/w
Constraints:
range: 1-255
 .1.3.6.1.4.1.2011.6.113.1.1.1.2
hwPstnPTPRecvVoiceGain
Indicates the receive gain (dB).
1: 0 dB
2: -0.5 dB
3: -1 dB
4: -1.5 dB
5: -2 dB
6: -2.5 dB
7: -3 dB
8: -3.5 dB
9: -4 dB
10: -4.5 dB
11: -5 dB
12: -5.5 dB
13: -…
Integer32r/w
Constraints:
range: 1-255
 .1.3.6.1.4.1.2011.6.113.1.1.1.3
hwPstnPTPDialMode
Indicates the dialing mode.
Options:
1.modeDtmfPulseBoth(1) -indicates the dial mode are both pulse and DTMF
2.modeDtmfOnly(2) -indicates the dial mode is only DTMF
3.modePulseOnly(3) -indicates the dial mode…
Enumerationr/w
Enumerated Values:
1modeDtmfPulseBoth
2modeDtmfOnly
3modePulseOnly
 .1.3.6.1.4.1.2011.6.113.1.1.1.4
hwPstnPTPReversePoleEnable
Indicates whether to support the polarity-reversing pulse.
Options:
1.reversePoleDisable(1) -indicates the reverse pole is disable
2.reversePoleEnable(2) -indicates the reverse pole is enable
Enumerationr/w
Enumerated Values:
1reversePoleDisable
2reversePoleEnable
 .1.3.6.1.4.1.2011.6.113.1.1.1.5
hwPstnPTPReversePoleLevel
Indicates the level width of the polarity-reversing pulse (unit: ms). Step: 10 ms.
Integer32r/w
Constraints:
range: 20-1270
 .1.3.6.1.4.1.2011.6.113.1.1.1.6
hwPstnPTPPolarityReverseMode
The polarity reversal mode.
Options:
1.hardReversePole(1) -Indicates the polarity reversal mode is hard polarity reversal
2.softReversePole(2) -Indicates the polarity reversal mode is soft polarity reversal
Enumerationr/w
Enumerated Values:
1hardReversePole
2softReversePole
 .1.3.6.1.4.1.2011.6.113.1.1.1.7
hwPstnPTPImpedance
Port impedance of the port. The following values indicates different impedance with
different application circumstances.
1 -- Bureau machine in China(200+680|| 100nf)
2 -- User Machine in China(200+560|| 100nf)
3 --…
Integer32r/w
Constraints:
range: 1-16
 .1.3.6.1.4.1.2011.6.113.1.1.1.8
hwPstnPTPCurrent
Port current supported by the board. The value ranges from 1 to 7,
which indicates the port current value(the maximum number of the ports with the current of
35mA ,40mA and 45mA is 5) .
1: 16mA
2: 20mA
3: 25mA
4: 30mA
…
Integer32r/w
Constraints:
range: 1-7
 .1.3.6.1.4.1.2011.6.113.1.1.1.9
hwPstnPTPHighLevel
Indicates the high level width of the 16KC (unit: ms).
Integer32r/w
Constraints:
range: 20-500
 .1.3.6.1.4.1.2011.6.113.1.1.1.10
hwPstnPTPLowLevel
Indicates the low level width of the 16KC (unit: ms).
Integer32r/w
Constraints:
range: 20-500
 .1.3.6.1.4.1.2011.6.113.1.1.1.11
hwPstnPTPKCType
Indicates the 12KC/16KC type.
Options:
1.port1216kcSelector16kc(1) -indicates the 16kc
2.port1216kcSelector12kc(2) -indicates the 12kc
Enumerationr/w
Enumerated Values:
1port1216kcSelector16kc
2port1216kcSelector12kc
 .1.3.6.1.4.1.2011.6.113.1.1.1.12
hwPstnPTPVoltage
Indicates the valid level of the 12KC/16KC.
Options:
1.port1216kcValidVoltage0(1) -indicates 0.45 Vrms
2.port1216kcValidVoltage1(2) -indicates 0.775 Vrms
3.port1216kcValidVoltage2(3) -indicates 1.0 Vrms
4…
Enumerationr/w
Enumerated Values:
1port1216kcValidVoltage0
2port1216kcValidVoltage1
3port1216kcValidVoltage2
4port1216kcValidVoltage3
5port1216kcValidVoltage4
6port1216kcValidVoltage5
7port1216kcValidVoltage6
8port1216kcValidVoltage7
9port1216kcValidVoltage8
10port1216kcValidVoltage9
 .1.3.6.1.4.1.2011.6.113.1.1.1.13
hwPstnPTPActualSendGain
Indicates the actual transmit gain of the port.
-1: invalid value
1: 5 dB
2: 4.5 dB
3: 4 dB
4: 3.5 dB
5: 3 dB
6: 2.5 dB
7: 2 dB
8: 1.5 dB
9: 1 dB
10: 0.5 dB
11: 0 dB
12: -0.5 …
Integer32
Constraints:
range: -1--1
range: 1-23
 .1.3.6.1.4.1.2011.6.113.1.1.1.14
hwPstnPTPActualRecvGain
Indicates the actual receive gain of the port.
-1: invalid value
1: 0 dB
2: -0.5 dB
3: -1 dB
4: -1.5 dB
5: -2 dB
6: -2.5 dB
7: -3 dB
8: -3.5 dB
9: -4 dB
10: -4.5 dB
11: …
Integer32
Constraints:
range: -1--1
range: 1-25
 .1.3.6.1.4.1.2011.6.113.1.1.1.15
hwPstnPTPConfigState
Indicates the configuration status of the subscriber type. 1-Not configured; 2-Configured.
Options:
1.notConfigUserType(1) -not configured
2.configUserType(2) -configured
Enumeration
Enumerated Values:
1notConfigUserType
2configUserType
 .1.3.6.1.4.1.2011.6.113.1.1.1.16
hwPstnPTPLineLock
Indicates support lock port or not
Options:
1.enable(1) -support the lock of the port
2.disable(2) -not support the lock of the port
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.2011.6.113.1.1.1.17
hwPstnPTPNlpMode
Indicates the Nlp mode of the port.
Options:
1.normalMode(1) -indicates enable the function of non-linear process for echo control performance in default level
2.ecgainMode(2) -indicates enable the funct…
Enumerationr/w
Enumerated Values:
1normalMode
2ecgainMode
3increasedMode
4reducedMode
5close
6dtmfEcMode
 .1.3.6.1.4.1.2011.6.113.1.1.1.18
hwPstnPTPClipReversePole
Indicates whether to support the polarity-reversing pulse when Clip.
Options:
1.enable(1) -support the polarity-reversing pulse
2.disable(2) -not support the polarity-reversing pulse
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.2011.6.113.1.1.1.19
hwPstnPTPPulsePeriodUpper
Indicates the upper limit of the pulse period (unit: ms).
Integer32r/w
Constraints:
range: 20-500
 .1.3.6.1.4.1.2011.6.113.1.1.1.20
hwPstnPTPPulsePeriodLower
Indicates the lower limit of the pulse period
Unit: ms
Integer32r/w
Constraints:
range: 20-500
 .1.3.6.1.4.1.2011.6.113.1.1.1.21
hwPstnPTPPulseDurationUpper
Indicates the upper limit of the pulse duration (unit: ms).
Integer32r/w
Constraints:
range: 20-200
 .1.3.6.1.4.1.2011.6.113.1.1.1.22
hwPstnPTPPulseDurationLower
Indicates the lower limit of the pulse duration (unit: ms).
Integer32r/w
Constraints:
range: 20-200
 .1.3.6.1.4.1.2011.6.113.1.1.1.23
hwPstnPTPPulsePauseUpper
Indicates the upper limit of the pulse pause (unit: ms).
Integer32r/w
Constraints:
range: 20-200
 .1.3.6.1.4.1.2011.6.113.1.1.1.24
hwPstnPTPPulsePauseLower
Indicates the lower limit of the pulse pause (unit: ms).
Integer32r/w
Constraints:
range: 20-200
 .1.3.6.1.4.1.2011.6.113.1.1.1.25
hwPstnPTPProhibit
Indicates whether to prohibit the PSTN port.
Options:
1.disable(1) -indicates that the PSTN port is unprohibited
2.enable(2) -indicates that the PSTN port is prohibited
Enumerationr/w
Enumerated Values:
1disable
2enable
 .1.3.6.1.4.1.2011.6.113.1.1.1.26
hwPstnPTPIdleOffhookTime
Indicates the caller offhook recognised time (unit: 10ms).
If the subscriber's A/B lines were detected in short circuit longer than this time as a caller party,
MG will report offhook message.
Integer32r/w
Constraints:
range: 5-25
 .1.3.6.1.4.1.2011.6.113.1.1.1.27
hwPstnPTPRingOffhookTime
Indicates the callee offhook recognised time during ringing (unit: 10ms).
While the subscriber was ringing as a callee party, if the A/B lines were detected in short circuit longer
than this time, MG will report offhoo…
Integer32r/w
Constraints:
range: 5-25
 .1.3.6.1.4.1.2011.6.113.1.1.1.28
hwPstnPTPFskOffhookTime
Indicates the callee offhook recognised time during onhook data transmission (unit: 10ms).
While the subscriber was called but not ringing, if the A/B lines were detected in short circuit longer
than this time, MG will…
Integer32r/w
Constraints:
range: 5-25
 .1.3.6.1.4.1.2011.6.113.1.1.1.29
hwPstnPTPCurrentAdjustFactor
Indicates the adjustive speed of the DC output voltage.
Integer32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.2011.6.113.1.1.1.30

hwPstnPTPOperTable

table
.1.3.6.1.4.1.2011.6.113.1.2 · 1 row entry · 10 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwPstnPTPOperTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-VOICEPORT-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-VOICEPORT-MIB::hwPstnPTPOperTable' 
Indicates the operation table (management, maintenance, and status query) of the PSTN PTP layer. 
The index of this table is  hwPstnPTPOperIndex.
hwPstnPTPOperEntry row .1.3.6.1.4.1.2011.6.113.1.2.1
Indicates the operation table (management, maintenance, and status query) of the PSTN PTP layer.
The index of this entry is hwPstnPTPOperIndex.
Indexes
Column Syntax OID
hwPstnPTPOperIndex
Indicates the shelf/slot/port index.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.113.1.2.1.1
hwPstnPTPSrvState
PSTN port physic state:
Options:
1.normal(1) -indicates the PSTN port physic state is normal
2.fault(2) -indicates the PSTN port physic state is fault
3.deactive(3) -indicates the PSTN port physic state is dea…
Enumeration
Enumerated Values:
1normal
2fault
3deactive
4powerdeny
 .1.3.6.1.4.1.2011.6.113.1.2.1.2
hwPstnPTPLoopBackState
PSTN port loop state:
Options:
1.noLoop(1) -indicates the PSTN port loop state is no loop
2.remoteLoop(2) -indicates the PSTN port loop state is remote loop
3.localLoop(3) -indicates the PSTN port loop state is loc…
Enumeration
Enumerated Values:
1noLoop
2remoteLoop
3localLoop
 .1.3.6.1.4.1.2011.6.113.1.2.1.3
hwPstnPTPTestState
PSTN port test state:
Options:
1.noTest(1) -indicates that there is no test on the PSTN port
2.test(2) -indicates that there is a test on the PSTN port
Enumeration
Enumerated Values:
1noTest
2test
 .1.3.6.1.4.1.2011.6.113.1.2.1.4
hwPstnPTPAdminOper
Indicates the maintenance operation of the physical layer of the PSTN port.
Options:
1.reset(1) -indicates the maintenance operation is reset
2.localLoop(2) -indicates the maintenance operation is l…
Enumerationr/w
Enumerated Values:
-1invalidvalue
1reset
2localLoop
3remoteLoop
4cancelLoop
5clearLineFault
 .1.3.6.1.4.1.2011.6.113.1.2.1.5
hwPstnPTPSrvStateChange
Indicates the service running status changing time of the PSTN port.
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.113.1.2.1.6
hwPstnPTPLoopBackStateChange
Indicates the physical loopback status changing time of the PSTN port.
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.113.1.2.1.7
hwPstnPTPTestStateChange
Indicates the physical test status changing time of the PSTN port.
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.113.1.2.1.8
hwPstnPTPLicenseState
Indicates the service license status of the PSTN port.
Options:
1.noConfigure(1) -indicates the service license status of the PSTN port is no configuration
2.noLicense(2) -indicates the service license status o…
Enumeration
Enumerated Values:
1noConfigure
2noLicense
3licensed
 .1.3.6.1.4.1.2011.6.113.1.2.1.9
hwPstnPTPLineState
PSTN port line state:
Options:
1.normal(1) -indicates that the state of PSTN port line is normal
2.onEarth(2) -indicates that the state of PSTN port line on earth
3.unknown(3) -indicates that the state of PSTN port l…
Enumeration
Enumerated Values:
1normal
2onEarth
3unknown
 .1.3.6.1.4.1.2011.6.113.1.2.1.10

hwBraPTPConfigTable

table
.1.3.6.1.4.1.2011.6.113.1.3 · 1 row entry · 12 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwBraPTPConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-VOICEPORT-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-VOICEPORT-MIB::hwBraPTPConfigTable' 
Indicates the physical attribute configuration table of the BRA port.
The index of this table is hwBraPTPIndex.
hwBraPTPConfigEntry row .1.3.6.1.4.1.2011.6.113.1.3.1
Indicates the physical attribute configuration table of the BRA port.
The index of this entry is hwBraPTPIndex.
Indexes
Column Syntax OID
hwBraPTPIndex
Indicates the shelf/slot/port index.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.113.1.3.1.1
hwBraPTPRPower
Indicates whether remote power supply is supported. 1-Not supported; 2-Supported.
Options:
1.disable(1) -not support remote power supply
2.enable(2) -support remote power supply
Enumerationr/w
Enumerated Values:
1disable
2enable
 .1.3.6.1.4.1.2011.6.113.1.3.1.2
hwBraPTPAutoDeactive
Indicates whether automatic deactivation is supported. 1-Not supported; 2-Supported.
Options:
1.disable(1) -not support automatic deactivation
2.enable(2) -support automatic deactivation
Enumerationr/w
Enumerated Values:
1disable
2enable
 .1.3.6.1.4.1.2011.6.113.1.3.1.3
hwBraPTPAutoDeactiveDelay
Indicates the automatic deactivation delay of the BRA (unit: second).
Integer32r/w
Constraints:
range: 10-360
 .1.3.6.1.4.1.2011.6.113.1.3.1.4
hwBraPTPWorkMode
Indicates the BRA port working mode.
Options:
1.p2mp(1) -indicates Point to multi-point
2.p2p(2) -indicates Point to point
3.auto(3) -indicates the adaptive manner, the result of consultation may be p2mp…
Enumerationr/w
Enumerated Values:
1p2mp
2p2p
3auto
 .1.3.6.1.4.1.2011.6.113.1.3.1.5
hwBraPTPPowerState
Indicates the power status of the NT1. 1-Active power supply (PS1); 2-Standby power supply (PS2).
Options:
1.state1(1) -indicates PS1 is normal; PS2 is normal
2.state2(2) -indicates PS1 is normal; PS2 is abnormal
3.stat…
Enumeration
Enumerated Values:
-1invalidvalue
1state1
2state2
3state3
4state4
 .1.3.6.1.4.1.2011.6.113.1.3.1.6
hwBraPTPConfigState
Indicates the configuration status of the subscriber type.
Options:
1.notConfigUserType(1) -not configured
2.configUserType(2) -configured
Enumeration
Enumerated Values:
1notConfigUserType
2configUserType
 .1.3.6.1.4.1.2011.6.113.1.3.1.7
hwBraPTPL1ActiveMode
Indicates layer 1 active mode of bra port.
Options:
1.stableActive(1) -indicates the layer 1 active mode of bra port is stable active
2.unstableActive(2) -indicates the layer 1 active mode of bra port is unstabl…
Enumerationr/w
Enumerated Values:
1stableActive
2unstableActive
 .1.3.6.1.4.1.2011.6.113.1.3.1.8
hwBraPTPUniAlarmReport
Indicates enable user network interface fault alarm or not.
Options:
1.enable(1) -indicates enable the user network interface fault alarm
2.disable(2) -indicates disable the user network interface fault alarm
Defau…
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.2011.6.113.1.3.1.9
hwBraPTPL2Monitor
Indicates enable layer 2 error statistic of bra port or not.
Options:
1.disable(1) -indicates disable the layer 2 error statistic of bra port
2.enable(2) -indicates enable the layer 2 error statistic of bra port
Defaul…
Enumerationr/w
Enumerated Values:
1disable
2enable
 .1.3.6.1.4.1.2011.6.113.1.3.1.10
hwBraPTPActivePeriod
Indicates the interval of the periodical automatic activation. 0 means that periodical automatic activation is disabled (unit: minutes).
Integer32r/w
Constraints:
range: 0-60
 .1.3.6.1.4.1.2011.6.113.1.3.1.11
hwBraPTPActualWorkMode
Indicates the BRA port actual working mode.
Options:
1.p2mp(1) -indicates Point to multi-point
2.p2p(2) -indicates Point to point
Enumeration
Enumerated Values:
1p2mp
2p2p
 .1.3.6.1.4.1.2011.6.113.1.3.1.12

hwBraPTPOperTable

table
.1.3.6.1.4.1.2011.6.113.1.4 · 1 row entry · 10 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwBraPTPOperTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-VOICEPORT-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-VOICEPORT-MIB::hwBraPTPOperTable' 
Indicates the operation table (management, maintenance, and status query) of the BRA PTP layer.
The index of this table is hwBraPTPOperIndex.
hwBraPTPOperEntry row .1.3.6.1.4.1.2011.6.113.1.4.1
Indicates the operation table (management, maintenance, and status query) of the BRA PTP layer.
The index of this entry is hwBraPTPOperIndex.
Indexes
Column Syntax OID
hwBraPTPOperIndex
Indicates the shelf/slot/port index.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.113.1.4.1.1
hwBraPTPSrvState
Indicates the service running status of the BRA port.
Options:
1.normal(1) -indicates the service running status of the BRA port is normal
2.fault(2) -indicates the service running status of the BRA port is fault…
Enumeration
Enumerated Values:
1normal
2fault
3deactive
 .1.3.6.1.4.1.2011.6.113.1.4.1.2
hwBraPTPLoopBackState
Indicates the physical loopback status of the BRA port.
Options:
1.noLoop(1) -indicates the loopback status is no loop
2.remoteLoop(2) -indicates the loopback status is remote loop
3.localLoop(3) -indicates the lo…
Enumeration
Enumerated Values:
1noLoop
2remoteLoop
3localLoop
 .1.3.6.1.4.1.2011.6.113.1.4.1.3
hwBraPTPTestState
Indicates the test status of the BRA port.
Options:
1.noTest(1) -indicates there is no test
2.test(2) -indicates there is a test
Enumeration
Enumerated Values:
1noTest
2test
 .1.3.6.1.4.1.2011.6.113.1.4.1.4
hwBraPTPAdminOper
Indicates the maintenance operation of the physical layer of the BRA port.
Options:
1.reset(1) -indicates the maintenance operation is reset
2.localLoop(2) -indicates the maintenance operation is local lo…
Enumerationr/w
Enumerated Values:
-1invalidvalue
1reset
2localLoop
3remoteLoop
4cancelLoop
5active
6deactive
 .1.3.6.1.4.1.2011.6.113.1.4.1.5
hwBraPTPSrvStateChange
Indicates the service running status changing time of the BRA port.
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.113.1.4.1.6
hwBraPTPLoopBackStateChange
Indicates the loopback status changing time of the BRA port.
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.113.1.4.1.7
hwBraPTPTestStateChange
Indicates the test status changing time of the BRA port.
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.113.1.4.1.8
hwBraPTPLicenseState
Indicates the service license status of the BRA port.
Options:
1.noConfigure(1) -indicates the service license status is no configuration
2.noLicense(2) -indicates the service license status is no license
3.licensed(…
Enumeration
Enumerated Values:
1noConfigure
2noLicense
3licensed
 .1.3.6.1.4.1.2011.6.113.1.4.1.9
hwBraPTPAlarmState
Indicates the alarm state of bra port,from left to right,each bit represents one alarm state.
Options:
1.bit0(0) -indicates LT overload
2.bit1(1) -indicates S port fault(EI2)
3.bit2(2) -indicates U port fault(LOS/RSY…
Bits
Enumerated Values:
0bit0
1bit1
2bit2
3bit3
4bit4
 .1.3.6.1.4.1.2011.6.113.1.4.1.10

hwBRAPTPPerformanceStatTable

table
.1.3.6.1.4.1.2011.6.113.1.5 · 1 row entry · 10 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwBRAPTPPerformanceStatTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-VOICEPORT-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-VOICEPORT-MIB::hwBRAPTPPerformanceStatTable' 
Indicates the performance statistics table of the BRA PTP layer.
The index of this table is hwBraPTPPerforIndex.
hwBRAPTPPerformanceStatEntry row .1.3.6.1.4.1.2011.6.113.1.5.1
Indicates the performance statistics table of the BRA PTP layer.
The index of this entry is hwBraPTPPerforIndex.
Indexes
Column Syntax OID
hwBraPTPPerforIndex
Indicates the shelf/slot/port index.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.113.1.5.1.1
hwBraPTPPerformanceStatOprType
Indicates the status of the performance statistics operation.
Options:
1.stop(1) -indicates the status of the performance statistics operation is stop
2.start(2) -indicates the status of the performance statistics o…
Enumerationr/w
Enumerated Values:
1stop
2start
 .1.3.6.1.4.1.2011.6.113.1.5.1.2
hwBraPTPPerformanceStatPeri
Indicates the performance statistics period (minute).
Integer32r/w
Constraints:
range: 1-5
 .1.3.6.1.4.1.2011.6.113.1.5.1.3
hwBraPTPErrorcode
Indicates the threshold of error code (count of error code).
Integer32r/w
Constraints:
range: 50-84
 .1.3.6.1.4.1.2011.6.113.1.5.1.4
hwBraPTPNebeUas
Indicates the Near End Block Error (NEBE) unavailable seconds (second).
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.113.1.5.1.5
hwBraPTPFebeUas
Indicates the Far End Block Error (FEBE) unavailable seconds (second).
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.113.1.5.1.6
hwBraPTPNebeEs
Indicates the NEBE errored seconds (second).
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.113.1.5.1.7
hwBraPTPFebeEs
Indicates the FEBE errored seconds (second).
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.113.1.5.1.8
hwBraPTPNebeSes
Indicates the NEBE severely errored seconds (second).
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.113.1.5.1.9
hwBraPTPFebeSes
Indicates the FEBE severely errored seconds (second).
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.113.1.5.1.10

hwE1PTPConfigTable

table
.1.3.6.1.4.1.2011.6.113.1.6 · 1 row entry · 9 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwE1PTPConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-VOICEPORT-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-VOICEPORT-MIB::hwE1PTPConfigTable' 
Indicates the configuration table (attribute configuration and query) of the E1 PTP layer.
The index of this table is hwE1PTPIndex.
hwE1PTPConfigEntry row .1.3.6.1.4.1.2011.6.113.1.6.1
Indicates the configuration table (attribute configuration and query) of the E1 PTP layer.
The index of this entry is hwE1PTPIndex.
Indexes
Column Syntax OID
hwE1PTPIndex
Indicates the shelf/slot/port index.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.113.1.6.1.1
hwE1PTPFrameVerifyMode
Indicates the CRC4 frame check.
Options:
1.enable(1) -indicates the CRC4 frame check is enable
2.disable(2) -indicates the CRC4 frame check is disable
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.2011.6.113.1.6.1.2
hwE1PTPImpedance
Indicates the port impedance.
Options:
1.ohm75(1) -indicates the port impedance is 75 ohm
2.ohm120(2) -indicates the port impedance is 120 ohm
Enumerationr/w
Enumerated Values:
1ohm75
2ohm120
 .1.3.6.1.4.1.2011.6.113.1.6.1.3
hwE1PTPSignalType
Indicates the signaling type.
Options:
1.ccs(1) -indicates the signaling type is ccs
2.cas(2) -indicates the signaling type is cas
3.unframe(3) -indicates the signaling type is unframe
Enumerationr/w
Enumerated Values:
1ccs
2cas
3unframe
 .1.3.6.1.4.1.2011.6.113.1.6.1.4
hwE1PTPConfigState
Indicates the configuration status of the subscriber type.
Options:
1.notConfigUserType(1) -not configured
2.configVoiceUserType(2) -configured MG PRA subscriber
3.configPWUserType(3) -configured PW user
4.c…
Enumeration
Enumerated Values:
1notConfigUserType
2configVoiceUserType
3configPWUserType
4configNativeTDM
 .1.3.6.1.4.1.2011.6.113.1.6.1.5
hwE1PTPAccessDSMode
Indicates physical layer digital section access mode of e1 port,default:digitalAccess(1).
Options:
1.digitalAccess(1) -digital access
2.directAccess(2) -direct access
Enumerationr/w
Enumerated Values:
1digitalAccess
2directAccess
 .1.3.6.1.4.1.2011.6.113.1.6.1.6
hwE1PTPErrAlarmSet
Indicates set e1 error alarm switch,from left to right,each bit respresent a switch,default:111000
Options:
1.bit0(0) -indicates report pcm line fault alarm
2.bit1(1) -indicates when error rate reached ULF(Unc…
Bitsr/w
Enumerated Values:
0bit0
1bit1
2bit2
3bit3
4bit4
5bit5
 .1.3.6.1.4.1.2011.6.113.1.6.1.7
hwE1PTPL2Monitor
enable layer 2 error statistic of e1 port or not,default:enable(2).
Options:
1.disable(1) -indicates the layer 2 error statistic of e1 port is disable
2.enable(2) -indicates the layer 2 error statistic of e1 port is en…
Enumerationr/w
Enumerated Values:
1disable
2enable
 .1.3.6.1.4.1.2011.6.113.1.6.1.8
hwE1PTPLineCode
line code of e1 port,default:hdb3(1).
Options:
1.hdb3(1) -indicates the line code of e1 port is hdb3
2.ami(2) -indicates the line code of e1 port is ami
Enumerationr/w
Enumerated Values:
1hdb3
2ami
 .1.3.6.1.4.1.2011.6.113.1.6.1.9

hwE1PTPOperTable

table
.1.3.6.1.4.1.2011.6.113.1.7 · 1 row entry · 6 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwE1PTPOperTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-VOICEPORT-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-VOICEPORT-MIB::hwE1PTPOperTable' 
Indicates the operation table (management, maintenance, and status query) of the E1 PTP layer.
The index of this table is hwE1PTPOperIndex.
hwE1PTPOperEntry row .1.3.6.1.4.1.2011.6.113.1.7.1
Indicates the operation table (management, maintenance, and status query) of the E1 PTP layer.
The index of this entry is hwE1PTPOperIndex.
Indexes
Column Syntax OID
hwE1PTPOperIndex
Indicates the shelf/slot/port index.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.113.1.7.1.1
hwE1PTPSrvState
Indicates the service running status of the E1 port.
Options:
1.normal(1) -indicates the service running status of e1 port is normal
2.fault(2) -indicates the service running status of e1 port is fault …
Enumeration
Enumerated Values:
1normal
2fault
3lineAbnormal
 .1.3.6.1.4.1.2011.6.113.1.7.1.2
hwE1PTPLoopBackState
Indicates the physical loopback status of the E1 port.
Options:
1.noLoop(1) -indicates the loopback status of e1 port is no loop
2.remoteLoop(2) -indicates the loopback status of e1 port is remote loo…
Enumeration
Enumerated Values:
1noLoop
2remoteLoop
3localLoop
4eocLoop
 .1.3.6.1.4.1.2011.6.113.1.7.1.3
hwE1PTPAdminOper
Indicates the maintenance operation of the physical layer of the E1 port.
Options:
1.reset(1) -indicates the maintenance operation of e1 port is no reset
2.localLoop(2) -indicates the maintenance operation o…
Enumerationr/w
Enumerated Values:
-1invalidvalue
1reset
2localLoop
3remoteLoop
4cancelLoop
 .1.3.6.1.4.1.2011.6.113.1.7.1.4
hwE1PTPWarningState
Indicates the alarm status of the E1 line.
Bit0: LOS (0: no LOS alarm; 1: LOS alarm occurs)
Bit1: AIS (0: no AIS alarm; 1: AIS alarm occurs)
Bit2: LFA (0: no LFA alarm; 1: LFA alarm occurs)
it3: LMFA (0: no LMFA alarm; …
Integer32
Constraints:
range: -1-4294967295
 .1.3.6.1.4.1.2011.6.113.1.7.1.5
hwE1PTPLicenseState
Indicates the service license status of the E1 port.
Options:
1.noConfigure(1) -indicates the service license status of the E1 port is no configuration
2.noLicense(2) -indicates the service license status of th…
Enumeration
Enumerated Values:
1noConfigure
2noLicense
3licensed
 .1.3.6.1.4.1.2011.6.113.1.7.1.9

hwGTCOperateTable

table
.1.3.6.1.4.1.2011.6.113.1.8 · 1 row entry · 3 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwGTCOperateTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-VOICEPORT-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-VOICEPORT-MIB::hwGTCOperateTable' 
Indicates the GTC operation table (test control).
The index of this table is hwGTCIndex.
hwGTCOperateEntry row .1.3.6.1.4.1.2011.6.113.1.8.1
Indicates the GTC operation table (test control).
The index of this entry is hwGTCIndex.
Indexes
Column Syntax OID
hwGTCIndex
Indicates the GTC test index.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.113.1.8.1.1
hwGTCTimer
Indicates the value of the GTC test timer.
The system automatically stops the GTC test when the timer times out (unit: second).When the command for starting a test is delivered, the command must be bound to the test tim…
Integer32r/w
Constraints:
range: 1-600
 .1.3.6.1.4.1.2011.6.113.1.8.1.2
hwGTCOperate
Options:
1.undertest(1) -indicates Start the GTC test
2.finishtest(2) -indicates Stop the GTC test
3.invalidvalue(-1) -indicates an invalid value
Enumerationr/w
Enumerated Values:
-1invalidvalue
1undertest
2finishtest
 .1.3.6.1.4.1.2011.6.113.1.8.1.3

hwUserDefineRingTypeTable

table
.1.3.6.1.4.1.2011.6.113.1.9 · 1 row entry · 7 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwUserDefineRingTypeTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-VOICEPORT-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-VOICEPORT-MIB::hwUserDefineRingTypeTable' 
Indicates the user-defined ring type table.
The index of this table is hwUserDefineRingType.
hwUserDefineRingTypeEntry row .1.3.6.1.4.1.2011.6.113.1.9.1
Indicates the user-defined ring type table.
The index of this entry is hwUserDefineRingType.
Indexes
Column Syntax OID
hwUserDefineRingType
Index of ring type
Integer32
Constraints:
range: 1-16
 .1.3.6.1.4.1.2011.6.113.1.9.1.1
hwUserDefineRingPara1
The first ring time length(>=100 and <= 12750, 0 means to cancel parameter value)(millisecond)
Integer32r/w
Constraints:
range: 0-12750
 .1.3.6.1.4.1.2011.6.113.1.9.1.2
hwUserDefineRingPara2
The first silent time length(>=100 and <= 12750, 0 means to cancel parameter value)(millisecond)
Integer32r/w
Constraints:
range: 0-12750
 .1.3.6.1.4.1.2011.6.113.1.9.1.3
hwUserDefineRingPara3
The second ring time length(>=100 and <= 12750, 0 means to cancel parameter value)(millisecond)
Integer32r/w
Constraints:
range: 0-12750
 .1.3.6.1.4.1.2011.6.113.1.9.1.4
hwUserDefineRingPara4
The second silent time length(>=100 and <= 12750,0 means to cancel parameter value)(millisecond)
Integer32r/w
Constraints:
range: 0-12750
 .1.3.6.1.4.1.2011.6.113.1.9.1.5
hwUserDefineRingPara5
The third ring time length(>=100 and <= 12750,0 means to cancel parameter value)(millisecond)
Integer32r/w
Constraints:
range: 0-12750
 .1.3.6.1.4.1.2011.6.113.1.9.1.6
hwUserDefineRingPara6
The third silent time length(>=100 and <= 12750,0 means to cancel parameter value)(millisecond)
Integer32r/w
Constraints:
range: 0-12750
 .1.3.6.1.4.1.2011.6.113.1.9.1.7

hwPstnPortStateStatisticTable

table
.1.3.6.1.4.1.2011.6.113.1.11 · 1 row entry · 6 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwPstnPortStateStatisticTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-VOICEPORT-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-VOICEPORT-MIB::hwPstnPortStateStatisticTable' 
Indicates the PSTN port status mapping table.
The indexes of this table are hwPstnPTPFrameIndex and hwPstnPTPSlotIndex.
hwPstnPortStateStatisticEntry row .1.3.6.1.4.1.2011.6.113.1.11.1
Indicates the PSTN port status mapping table.
The indexes of this entry are hwPstnPTPFrameIndex and hwPstnPTPSlotIndex.
Indexes
Column Syntax OID
hwPstnPTPFrameIndex
Indicates the shelf index.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.113.1.11.1.1
hwPstnPTPSlotIndex
Indicates the slot index.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.113.1.11.1.2
hwPstnBoardPortNumber
Indicates the total number of ports on the specified PSTN service board.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.113.1.11.1.3
hwPstnPTPSrvStateBitmapList
Indicates the bit mapping table of the service running status of all the PSTN ports of the specified board (the status table consists of variable-length character strings, and each UCHAR corresponds to a port status). 1…
OctetString .1.3.6.1.4.1.2011.6.113.1.11.1.4
hwPstnPTPLoopBackStateBitmapList
Indicates the bit mapping table of the physical loopback status of all the PSTN ports of the specified board (the status table consists of variable-length character strings, and each UCHAR corresponds to a port status).…
OctetString .1.3.6.1.4.1.2011.6.113.1.11.1.5
hwPstnPTPTestStateBitmapList
Indicates the bit mapping table of the physical test status of all the PSTN ports of the specified board (the status table consists of variable-length character strings, and each UCHAR corresponds to a port status). 1-N…
OctetString .1.3.6.1.4.1.2011.6.113.1.11.1.6

hwBraPortStateStatisticTable

table
.1.3.6.1.4.1.2011.6.113.1.12 · 1 row entry · 6 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwBraPortStateStatisticTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-VOICEPORT-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-VOICEPORT-MIB::hwBraPortStateStatisticTable' 
Indicates the BRA port status mapping table.
The indexes of this table are hwBraPTPFrameIndex and hwBraPTPSlotIndex.
hwBraPortStateStatisticEntry row .1.3.6.1.4.1.2011.6.113.1.12.1
Indicates the BRA port status mapping table.
The indexes of this entry are hwBraPTPFrameIndex and hwBraPTPSlotIndex.
Indexes
Column Syntax OID
hwBraPTPFrameIndex
Indicates the shelf index.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.113.1.12.1.1
hwBraPTPSlotIndex
Indicates the slot index.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.113.1.12.1.2
hwBraBoardPortNumber
Indicates the total number of ports on the specified BRA service board.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.113.1.12.1.3
hwBraPTPSrvStateBitmapLists
Indicates the bit mapping table of the service running status of all the BRA ports of the specified board (the status table consists of variable-length character strings, and each UCHAR corresponds to a port status). 1-…
OctetString .1.3.6.1.4.1.2011.6.113.1.12.1.4
hwBraPTPLoopBackStateBitmapLists
Indicates the bit mapping table of the physical loopback status of all the BRA ports of the specified board (the status table consists of variable-length character strings, and each UCHAR corresponds to a port status). …
OctetString .1.3.6.1.4.1.2011.6.113.1.12.1.5
hwBraPTPTestStateBitmapList
Indicates the bit mapping table of the physical test status of all the BRA ports of the specified board (the status table consists of variable-length character strings, and each UCHAR corresponds to a port status). 1-No…
OctetString .1.3.6.1.4.1.2011.6.113.1.12.1.6

hwE1PTPL1AlarmThresholdTable

table
.1.3.6.1.4.1.2011.6.113.1.13 · 1 row entry · 4 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwE1PTPL1AlarmThresholdTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-VOICEPORT-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-VOICEPORT-MIB::hwE1PTPL1AlarmThresholdTable' 
degrade alarm threshold config table of e1 port layer 1 
The index of this table is hwE1PTPAlarmIndex.
hwE1PTPL1AlarmThresholdEntry row .1.3.6.1.4.1.2011.6.113.1.13.1
degrade alarm threshold config table of e1 port layer 1
The index of this entry is hwE1PTPAlarmIndex.
Indexes
Column Syntax OID
hwE1PTPAlarmIndex
Indicates the shelf/slot/port index.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.113.1.13.1.1
hwE1PTPDMAlarmThreshold
Indicates degrade minute alarm threshold, default:8.
Integer32r/w
Constraints:
range: 0-60
 .1.3.6.1.4.1.2011.6.113.1.13.1.2
hwE1PTPESAlarmThreshold
Indicates error second alarm threshold, default:432.
Integer32r/w
Constraints:
range: 0-3600
 .1.3.6.1.4.1.2011.6.113.1.13.1.3
hwE1PTPSESAlarmThreshold
Indicates sequential severe error second alarm threshold, default:4.
Integer32r/w
Constraints:
range: 0-60
 .1.3.6.1.4.1.2011.6.113.1.13.1.4

hwISDNPTPL2AlarmThresholdTable

table
.1.3.6.1.4.1.2011.6.113.1.14 · 1 row entry · 8 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwISDNPTPL2AlarmThresholdTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-VOICEPORT-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-VOICEPORT-MIB::hwISDNPTPL2AlarmThresholdTable' 
Indicates layer 2 signal error alarm threshold config table of ISDN(BRA/PRA) port.
The index of this table is hwIsdnPTPIndex.
hwISDNPTPL2AlarmThresholdEntry row .1.3.6.1.4.1.2011.6.113.1.14.1
Indicates layer 2 signal error alarm threshold config table of ISDN(BRA/PRA) port.
The index of this entry is hwIsdnPTPIndex.
Indexes
Column Syntax OID
hwIsdnPTPIndex
Indicates the shelf/slot/port index.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.113.1.14.1.1
hwIsdnL2DAUnexpectRespondThreshold
Indicates threshold of unexpected response alarm threshold,default :0, 0 means does not report alarm.
Integer32r/w
Constraints:
range: 0-20
 .1.3.6.1.4.1.2011.6.113.1.14.1.2
hwIsdnL2DARebuiltLinkRequestThreshold
Indicates threshold of peer initiated re-establishments when in multiple frame established state, default:0, 0 means does not report alarm.
Integer32r/w
Constraints:
range: 0-20
 .1.3.6.1.4.1.2011.6.113.1.14.1.3
hwIsdnL2DAN200OutTimeThreshold
Indicates threshold of unsuccessful re-transmissions n200 times, default:0, 0 means does not report alarm.
Integer32r/w
Constraints:
range: 0-20
 .1.3.6.1.4.1.2011.6.113.1.14.1.4
hwIsdnL2DAQ921AddrDomainErrThreshold
Indicates threshold of Q.921 address field errors, default:0, 0 means does not report alarm.
Integer32r/w
Constraints:
range: 0-20
 .1.3.6.1.4.1.2011.6.113.1.14.1.5
hwIsdnL2DAMDLERRJToOThreshold
Indicates threshold of Q.921 general protocol errors: MDL errors J to O : ETS.300.125, default:0, 0 means does not report alarm.
Integer32r/w
Constraints:
range: 0-20
 .1.3.6.1.4.1.2011.6.113.1.14.1.6
hwIsdnL2DAFrameSNErrThreshold
Indicates threshold of frame check sequence errors : for Q.921, default:0, 0 means does not report alarm.
Integer32r/w
Constraints:
range: 0-20
 .1.3.6.1.4.1.2011.6.113.1.14.1.7
hwIsdnL2DABufferOverFlowThreshold
Indicates threshold of buffer overflows, applies to Q.921, default:0, 0 means does not report alarm.
Integer32r/w
Constraints:
range: 0-20
 .1.3.6.1.4.1.2011.6.113.1.14.1.8

hwFxoPTPConfigTable

table
.1.3.6.1.4.1.2011.6.113.1.15 · 1 row entry · 14 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwFxoPTPConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-VOICEPORT-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-VOICEPORT-MIB::hwFxoPTPConfigTable' 
Indicates A list of hwFxoPTPConfigTable objects.
The index of this table is hwFxoPTPIndex
hwFxoPTPConfigTableEntry row .1.3.6.1.4.1.2011.6.113.1.15.1
Indicates A list of hwFxoPTPConfigTable objects.
The index of this entry is hwFxoPTPIndex
Indexes
Column Syntax OID
hwFxoPTPIndex
Indicates the frame/slot/port index.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.113.1.15.1.1
hwFxoPTPSendVoiceGain
Indicates the Fxo board send voice gain.
1: +5.0dB,
2: +4.5dB,
3: +4.0dB,
4: +3.5dB,
5: +3.0dB,
6: +2.5dB,
7: +2.0dB,
8: +1.5dB
9: +1.0dB,
10: +0.5dB
11: 0dB,
12: -0.5dB
13: -1.0dB,
14: -1.5dB,
…
Unsigned32r/w
Constraints:
range: 1-23
 .1.3.6.1.4.1.2011.6.113.1.15.1.2
hwFxoPTPRecvVoiceGain
Indicates the Fxo board receive voice gain.
1: +5.0dB,
2: +4.5dB,
3: +4.0dB,
4: +3.5dB
5: +3.0dB
6: +2.5dB,
7: +2.0dB,
8: +1.5dB
9: +1.0dB,
10: +0.5dB
11: 0dB,
12: -0.5dB
13: -1.0dB,
14: -1.5dB…
Unsigned32r/w
Constraints:
range: 1-23
 .1.3.6.1.4.1.2011.6.113.1.15.1.3
hwFxoPTPDCImpedance
Indicates the DC Impedance.
1: 50
2: 800
(unit: ??)
Unsigned32r/w
Constraints:
range: 1-2
 .1.3.6.1.4.1.2011.6.113.1.15.1.4
hwFxoPTPACImpedance
Indicates the AC Impedance.
1: 600
2: 900
3: 270 + (750 || 150 nF) and 275 + (780 || 150 nF)
4: 220 + (820 || 120 nF) and 220 + (820 || 115 nF)
5: 370 + (620 || 310 nF)
6: 320 + (1050 || 230 nF)
7: 370 + (820 || 110 nF…
Unsigned32r/w
Constraints:
range: 1-16
 .1.3.6.1.4.1.2011.6.113.1.15.1.5
hwFxoPTPRingMinDuration
Indicates the min of the ring during.
1: 100 ms
2: 150 ms
3: 200 ms
4: 256 ms
5: 384 ms
6: 512 ms
7: 640 ms
8: 1024 ms
Unsigned32r/w
Constraints:
range: 1-8
 .1.3.6.1.4.1.2011.6.113.1.15.1.6
hwFxoPTPRingMaxInterval
Indicates the max of the ring interval.
1: not use,
2: 128 ms,
3: 256ms,
4: 384ms,
5: 512ms,
6: 640ms,
7: 768ms,
8: 896ms,
9: 1024ms,
10: 1152ms,
11: 1280ms,
12: 1408ms,
13: 1536ms,
14: 1664ms,
15: 1792m…
Unsigned32r/w
Constraints:
range: 1-16
 .1.3.6.1.4.1.2011.6.113.1.15.1.7
hwFxoPTPRingFrequence
Indicates the ring frequence.
1: 16Hz,
2: 25Hz,
3: 50Hz
Unsigned32r/w
Constraints:
range: 1-3
 .1.3.6.1.4.1.2011.6.113.1.15.1.8
hwFxoPTPRingACAmplitude
Indicates the ring of the AC amplitude.
1: 74V,
2: 65V,
3: 50V
Unsigned32r/w
Constraints:
range: 1-3
 .1.3.6.1.4.1.2011.6.113.1.15.1.9
hwFxoPTPRingOffset
Indicates the ring offset.
Unsigned32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.2011.6.113.1.15.1.10
hwFxoPTPFeedMaxVol
Indicates the max of the PTP feed voltage.
1: -30V,
2: -35V,
3: -40V
4: -45V,
5: -50V
6: -55V
Unsigned32r/w
Constraints:
range: 1-6
 .1.3.6.1.4.1.2011.6.113.1.15.1.11
hwFxoPTPFeedMinVol
Indicates the min of the PTP feed voltage.
1: -50V,
2: -55V,
3: -60V
4: -65V,
5: -70V
6: -75V
7: -80V
Unsigned32r/w
Constraints:
range: 1-7
 .1.3.6.1.4.1.2011.6.113.1.15.1.12
hwFxoPTPFeedMaxCurrent
Indicates the max of the PTP feed current.
1: 25mA
2: 30mA
3: 35mA
4: 40mA
Unsigned32r/w
Constraints:
range: 1-4
 .1.3.6.1.4.1.2011.6.113.1.15.1.13
hwFxoPTPFeedMinCurrent
Indicates the min of the PTP feed current.
1: 16mA
2: 17mA
3: 18mA
4: 19mA
5: 20mA
Unsigned32r/w
Constraints:
range: 1-5
 .1.3.6.1.4.1.2011.6.113.1.15.1.14

hwFxoPTPOperateTable

table
.1.3.6.1.4.1.2011.6.113.1.16 · 1 row entry · 4 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwFxoPTPOperateTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-VOICEPORT-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-VOICEPORT-MIB::hwFxoPTPOperateTable' 
A list of HwFxoPTPOperateTableEntry objects.
The index of this table is hwFxoPTPOperIndex.
hwFxoPTPOperateTableEntry row .1.3.6.1.4.1.2011.6.113.1.16.1
A list of HwFxoPTPOperateTableEntry objects.
The index of this entry is hwFxoPTPOperIndex.
Indexes
Column Syntax OID
hwFxoPTPOperIndex
Indicates the frame/slot/port index.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.113.1.16.1.1
hwFxoPTPSrvState
Indicates the state of port.
Options:
1.normal(1) -indicates the state of port is normal
2.fault(2) -indicates the state of port is fault
Enumeration
Enumerated Values:
1normal
2fault
 .1.3.6.1.4.1.2011.6.113.1.16.1.2
hwFxoPTPLoopBackState
FXO port loop state:
Options:
1.noLoop(1) -indicates the FXO port loop state is no loop
2.remoteLoop(2) -indicates the FXO port loop state is remote loop
3.localLoop(3) -indicates the FXO port loop state …
Enumeration
Enumerated Values:
1noLoop
2remoteLoop
3localLoop
 .1.3.6.1.4.1.2011.6.113.1.16.1.3
hwFxoPTPAdminOper
Indicates the operate type.
Options:
1.reset(1) -indicates the operate type is no reset
2.localLoop(2) -indicates the operate type is local loop
3.remoteLoop(3) -indicates the operate type is remote loop …
Enumerationr/w
Enumerated Values:
1reset
2localLoop
3remoteLoop
4cancelLoop
 .1.3.6.1.4.1.2011.6.113.1.16.1.4

hwShdslPTPConfigTable

table
.1.3.6.1.4.1.2011.6.113.1.17 · 1 row entry · 6 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwShdslPTPConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-VOICEPORT-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-VOICEPORT-MIB::hwShdslPTPConfigTable' 
Indicates the configuration table (attribute configuration and query) of the Shdsl PTP layer.
The index of this table is hwShdslPTPIndex.
hwShdslPTPConfigEntry row .1.3.6.1.4.1.2011.6.113.1.17.1
Indicates the configuration table (attribute configuration and query) of the Shdsl PTP layer.
The index of this entry is hwShdslPTPIndex.
Indexes
Column Syntax OID
hwShdslPTPIndex
Indicates the shelf/slot/port index.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.113.1.17.1.1
hwShdslPTPFrameVerifyMode
Indicates the CRC4 frame check.
Options:
1.enable(1) -indicates the CRC4 frame check is enable
2.disable(2) -indicates the CRC4 frame check is disable
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.2011.6.113.1.17.1.2
hwShdslPTPSignalType
Indicates the signaling type.
Options:
1.ccs(1) -indicates the signaling type is ccs
2.cas(2) -indicates the signaling type is cas
3.unframe(3) -indicates the signaling type is unframe
Enumerationr/w
Enumerated Values:
1ccs
2cas
3unframe
 .1.3.6.1.4.1.2011.6.113.1.17.1.3
hwShdslPTPConfigState
Indicates the configuration status of the subscriber type.
Options:
1.notconfigUserType(1) -not configured
2.configUserType(2) -configured
Enumeration
Enumerated Values:
1notconfigUserType
2configUserType
 .1.3.6.1.4.1.2011.6.113.1.17.1.4
hwShdslPTPErrAlarmSet
Indicates set Shdsl error alarm switch,from left to right,each bit respresent a switch,default:111000.
Options:
1.bit0(0) -indicates report pcm line fault alarm
2.bit1(1) -indicates when error rate reached ULF(Uncondi…
Bitsr/w
Enumerated Values:
0bit0
1bit1
2bit2
3bit3
4bit4
5bit5
 .1.3.6.1.4.1.2011.6.113.1.17.1.5
hwShdslPTPL2Monitor
enable layer 2 error statistic of shdsl port or not,default:enable(2).
Options:
1.disable(1) -disable the layer 2 error statistic of shdsl port
2.enable(2) -enable the layer 2 error statistic of shdsl port
Enumerationr/w
Enumerated Values:
1disable
2enable
 .1.3.6.1.4.1.2011.6.113.1.17.1.6

hwShdslPTPOperTable

table
.1.3.6.1.4.1.2011.6.113.1.18 · 1 row entry · 4 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwShdslPTPOperTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-VOICEPORT-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-VOICEPORT-MIB::hwShdslPTPOperTable' 
Indicates the operation table (management, maintenance, and status query) of the Shdsl PTP layer.
The index of this table is hwShdslPTPOperIndex.
hwShdslPTPOperEntry row .1.3.6.1.4.1.2011.6.113.1.18.1
Indicates the operation table (management, maintenance, and status query) of the Shdsl PTP layer.
The index of this entry is hwShdslPTPOperIndex.
Indexes
Column Syntax OID
hwShdslPTPOperIndex
Indicates the shelf/slot/port index.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.113.1.18.1.1
hwShdslPTPSrvState
Indicates the service running status of the Shdsl port.
Options:
1.normal(1) -indicates the service running status of Shdsl port is normal
2.fault(2) -indicates the service running status of Shdsl port is…
Enumeration
Enumerated Values:
1normal
2fault
3lineAbnormal
 .1.3.6.1.4.1.2011.6.113.1.18.1.2
hwShdslPTPWarningState
Indicates the alarm status of the Shdsl line.
Bit0: LOS (0: no LOS alarm; 1: LOS alarm occurs)
Bit1: AIS (0: no AIS alarm; 1: AIS alarm occurs)
Bit2: LFA (0: no LFA alarm; 1: LFA alarm occurs)
Bit3: LMFA (0: no LMFA ala…
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.113.1.18.1.3
hwShdslPTPLicenseState
Indicates the service license status of the Shdsl port.
Options:
1.noconfigure(1) -indicates the service license status of the Shdsl port is no configuration
2.nolicense(2) -indicates the service license status…
Enumeration
Enumerated Values:
1noconfigure
2nolicense
3licensed
 .1.3.6.1.4.1.2011.6.113.1.18.1.4

hwPotsBoardToneDefineTable

table
.1.3.6.1.4.1.2011.6.113.1.19 · 1 row entry · 6 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwPotsBoardToneDefineTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-VOICEPORT-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-VOICEPORT-MIB::hwPotsBoardToneDefineTable' 
The index of this table is hwPotsBoardToneType.
PstnBoard pots signal tone config table.
hwPotsBoardToneDefineEntry row .1.3.6.1.4.1.2011.6.113.1.19.1
The index of this entry is hwPotsBoardToneType.
PstnBoard pots signal tone config table.
Indexes
Column Syntax OID
hwPotsBoardToneType
Indicates the tone type of signal tone.
Options:
1. busytone(1) -Indicate the tone type
Enumerationr/w
Enumerated Values:
1busytone
 .1.3.6.1.4.1.2011.6.113.1.19.1.1
hwPotsBoardToneFreq1
Indicates the first frequency of signal tone.(Unit:Hz)
Integer32r/w
Constraints:
range: 100-3400
 .1.3.6.1.4.1.2011.6.113.1.19.1.2
hwPotsBoardToneFreq2
Indicates the second frequency of signal tone.(Unit:Hz)
Integer32r/w
Constraints:
range: 0-3400
 .1.3.6.1.4.1.2011.6.113.1.19.1.3
hwPotsBoardToneOnTime
Indicates the on-time of signal tone. (Unit:ms)
Integer32r/w
Constraints:
range: 10-60000
 .1.3.6.1.4.1.2011.6.113.1.19.1.4
hwPotsBoardToneOffTime
Indicates the off-time of signal tone. (Unit:ms)
Integer32r/w
Constraints:
range: 0-60000
 .1.3.6.1.4.1.2011.6.113.1.19.1.5
hwPotsBoardToneLevel
Indicates the level of signal tone. (Unit:-1dBm0)
Integer32r/w
Constraints:
range: 0-20
 .1.3.6.1.4.1.2011.6.113.1.19.1.6