HUAWEI-USERLOG-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

hwUserlogNatSlotCfgInfoTable

table

.1.3.6.1.4.1.2011.5.25.18.1.1.6 · 1 row entry · 5 columns

Open in standard view

A table of NAT LOG configuration information for the
specified slot.

hwUserlogNatSlotCfgInfoEntry entry .1.3.6.1.4.1.2011.5.25.18.1.1.6.1

NAT LOG Configuration Information Entry for a slot.

Indexes

No indexes recorded

Column	Syntax	OID
hwUserlogNatCfgSlotNumber Slot number. Specify which slot is configured with NAT LOG.	Integer32	`.1.3.6.1.4.1.2011.5.25.18.1.1.6.1.1`
hwUserlogNatEnable The NAT LOG feature Enable status. If 1, NAT LOG is enbled. If 0, NAT LOG is disabled.	SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.2011.5.25.18.1.1.6.1.2`
hwUserlogNatAclNumber Access-list number. The value 0 means no ACL is specified. Only when NAT LOG is enabled, can ACL be configured. Only NAT flow which match the ACL will be logged.	SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.2011.5.25.18.1.1.6.1.3`
hwUserlogNatHostAddress The IP address of NAT LOG server.	RFC1155-SMIIpAddressr/w Textual Convention: RFC1155-SMIIpAddress `OctetString` Type Constraints: `range: 4`	`.1.3.6.1.4.1.2011.5.25.18.1.1.6.1.4`
hwUserlogNatUdpPort The UDP Port Number of NAT LOG UDP packet.	Integer32r/w	`.1.3.6.1.4.1.2011.5.25.18.1.1.6.1.5`

hwUserlogNatSlotRunInfoTable

table

.1.3.6.1.4.1.2011.5.25.18.1.1.7 · 1 row entry · 6 columns

Open in standard view

A table of NAT LOG running information for the specified slot.

hwUserlogNatSlotRunInfoEntry entry .1.3.6.1.4.1.2011.5.25.18.1.1.7.1

NAT LOG Running Information Entry for a slot.

Indexes

No indexes recorded

Column	Syntax	OID
hwUserlogNatRunSlotNumber Slot number. Specify on which slot the NAT LOG statistics displayed.	Integer32	`.1.3.6.1.4.1.2011.5.25.18.1.1.7.1.1`
hwUserlogNatTotalEntries The total number of NAT flow entries which are logged.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2011.5.25.18.1.1.7.1.2`
hwUserlogNatTotalPackets The total number of NAT LOG UDP packets generated by the router.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2011.5.25.18.1.1.7.1.3`
hwUserlogNatFailedEntries The total number of NAT flow entries failed in outputting.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2011.5.25.18.1.1.7.1.4`
hwUserlogNatFailedPackets The total number of NAT LOG UDP packets failed in outputting.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2011.5.25.18.1.1.7.1.5`
hwUserlogNatClearRunStat Clear the running statistics for NAT LOG. Write-only. If 1, the running statistics for NAT LOG is resetted. Other value is invalid.	SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.2011.5.25.18.1.1.7.1.6`

hwUserlogFlowSlotCfgInfoTable

table

.1.3.6.1.4.1.2011.5.25.18.1.2.6 · 1 row entry · 5 columns

Open in standard view

A table of BAS FLOW LOG configuration information for the
specified slot.

hwUserlogFlowSlotCfgInfoEntry entry .1.3.6.1.4.1.2011.5.25.18.1.2.6.1

BAS FLOW LOG Configuration Information Entry for a slot.

Indexes

No indexes recorded

Column	Syntax	OID
hwUserlogFlowCfgSlotNumber Slot number. Specify which slot is configured with BAS FLOW LOG.	Integer32	`.1.3.6.1.4.1.2011.5.25.18.1.2.6.1.1`
hwUserlogFlowEnable The BAS FLOW LOG feature Enable status. If 1, BAS FLOW LOG is enbled. If 0, BAS FLOW LOG is disabled.	SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.2011.5.25.18.1.2.6.1.2`
hwUserlogFlowAclNumber Access-list number. The value 0 means no ACL is specified. Only when BAS FLOW LOG is enabled, can ACL be configured. Only BAS flow which match the ACL will be logged.	SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.2011.5.25.18.1.2.6.1.3`
hwUserlogFlowHostAddress The IP address of BAS FLOW LOG server.	RFC1155-SMIIpAddressr/w Textual Convention: RFC1155-SMIIpAddress `OctetString` Type Constraints: `range: 4`	`.1.3.6.1.4.1.2011.5.25.18.1.2.6.1.4`
hwUserlogFlowUdpPort The UDP Port Number of BAS FLOW LOG UDP packet.	Integer32r/w	`.1.3.6.1.4.1.2011.5.25.18.1.2.6.1.5`

hwUserlogFlowSlotRunInfoTable

table

.1.3.6.1.4.1.2011.5.25.18.1.2.7 · 1 row entry · 6 columns

Open in standard view

A table of BAS FLOW LOG running information for the specified slot.

hwUserlogFlowSlotRunInfoEntry entry .1.3.6.1.4.1.2011.5.25.18.1.2.7.1

Running Information Entry for a slot.

Indexes

No indexes recorded

Column	Syntax	OID
hwUserlogFlowRunSlotNumber Slot number. Specify on which slot the BAS FLOW LOG statistics displayed.	Integer32	`.1.3.6.1.4.1.2011.5.25.18.1.2.7.1.1`
hwUserlogFlowTotalEntries The total number of BAS FLOW Entries which are logged.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2011.5.25.18.1.2.7.1.2`
hwUserlogFlowTotalPackets The total number of FLOW LOG UDP packet generated by the router.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2011.5.25.18.1.2.7.1.3`
hwUserlogFlowFailedEntries The total number of BAS FLOW entries failed in outputting.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2011.5.25.18.1.2.7.1.4`
hwUserlogFlowFailedPackets The total number of BAS FLOW LOG UDP packet failed in outputting.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2011.5.25.18.1.2.7.1.5`
hwUserlogFlowClearRunStat Clear the running statistics for FLOW LOG. Write-only. If 1, the running statistics for FLOW LOG is resetted. Other value is invalid.	SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.2011.5.25.18.1.2.7.1.6`

hwUserlogAccessSlotCfgInfoTable

table

.1.3.6.1.4.1.2011.5.25.18.1.3.4 · 1 row entry · 4 columns

Open in standard view

A table of BAS ACCESS LOG configuration information for the specified slot.

hwUserlogAccessSlotCfgInfoEntry entry .1.3.6.1.4.1.2011.5.25.18.1.3.4.1

BAS ACCESS LOG Configuration Information Entry for a slot.

Indexes

No indexes recorded

Column	Syntax	OID
hwUserlogAccessCfgSlotNumber Slot number. Specify which slot is configured with BAS ACCESS LOG.	Integer32	`.1.3.6.1.4.1.2011.5.25.18.1.3.4.1.1`
hwUserlogAccessEnable The BAS ACCESS LOG feature Enable status. If 1, BAS ACCESS LOG is enbled. If 0, BAS ACCESS LOG is disabled.	SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.2011.5.25.18.1.3.4.1.2`
hwUserlogAccessHostAddress The IP address of BAS ACCESS LOG server.	RFC1155-SMIIpAddressr/w Textual Convention: RFC1155-SMIIpAddress `OctetString` Type Constraints: `range: 4`	`.1.3.6.1.4.1.2011.5.25.18.1.3.4.1.3`
hwUserlogAccessUdpPort The UDP Port Number of BAS ACCESS LOG UDP packet.	Integer32r/w	`.1.3.6.1.4.1.2011.5.25.18.1.3.4.1.4`

hwUserlogAccessSlotRunInfoTable

table

.1.3.6.1.4.1.2011.5.25.18.1.3.5 · 1 row entry · 6 columns

Open in standard view

A table of BAS ACCESS LOG running information for the specified slot.

hwUserlogAccessSlotRunInfoEntry entry .1.3.6.1.4.1.2011.5.25.18.1.3.5.1

Running Information Entry for a slot.

Indexes

No indexes recorded

Column	Syntax	OID
hwUserlogAccessRunSlotNumber Slot number. Specify on which slot the BAS ACCESS LOG statistics displayed.	Integer32	`.1.3.6.1.4.1.2011.5.25.18.1.3.5.1.1`
hwUserlogAccessTotalEntries The total number of BAS ACCESS Records which are logged.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2011.5.25.18.1.3.5.1.2`
hwUserlogAccessTotalPackets The total number of ACCESS LOG UDP packet generated by the router.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2011.5.25.18.1.3.5.1.3`
hwUserlogAccessFailedEntries The total number of BAS ACCESS entries failed in outputting.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2011.5.25.18.1.3.5.1.4`
hwUserlogAccessFailedPackets The total number of BAS ACCESS LOG UDP packet failed in outputting.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2011.5.25.18.1.3.5.1.5`
hwUserlogAccessClearRunStat Clear the running statistics for ACCESS LOG. Write-only. If 1, the running statistics for ACCESS LOG is resetted. Other value is invalid.	SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.2011.5.25.18.1.3.5.1.6`